Search Results (15)

Background: Agro-industrial by-products, such as carob and brewer’s spent grain (BSG), have gained increasing attention as sustainable feed ingredients capable of enhancing the nutritional and functional value of Tenebrio molitor larvae. This study aimed to evaluate the effects of carob and BSG supplementation of growth substrates on larval performance and the functional properties of the resulting insect meals. Methods: Seven-week-old larvae were reared for 14 days on the following three diets: control (wheat bran), wheat bran + carob (Trt1), and wheat bran + BSG (Trt2). Larval weight, substrate consumption, and survival were recorded. After processing, insect meals were analyzed for chemical composition, total phenolic content (TPC), and antioxidant activity in both water- and lipid-soluble extracted fractions. Results: Both treatment groups showed significantly higher final weights than the control (Ctrl: 104.9 ± 2.69 g; Trt1: 114.8 ± 1.26 g; Trt2: 116.9 ± 1.07 g; p < 0.05). TPC was highest in the control for both fractions, and the antioxidant activity was similar between the Ctrl and Trt1 groups in the water-soluble fraction but significantly lower in the Trt2 group (p < 0.05). Conclusions: These findings highlight the potential of carob and BSG for sustainable insect farming, though their functional benefits may depend on the inclusion levels and their interaction with insect metabolism. Full article

Wheat bran (WB) is rich in bioactive compounds, but its incorporation into food products often negatively affects dough properties. The soluble components in WB, including polysaccharides, minerals, and proteins, exhibit significant variations across different bran layers and may dissolve and interact with flour components during food processing, affecting dough properties. This study aims to investigate the influence of aqueous extracts from different WB layers (aleurone layer, AL; non-aleurone layer, NAL) and their components on the functional properties of wheat starch and gluten. The results indicate that the AL-rich fraction yielded a higher extract content (30.6%) compared to the NAL-rich fraction (15.1%), attributable to the higher cellular content in the AL. Both the extracts and residues from AL and NAL significantly lowered the denaturation temperature of wheat gluten. The aqueous extracts reduced the storage (G′) and loss (G″) moduli of wheat gluten, primarily attributed to the effect of polysaccharide components, whereas the protein and ash fractions elevated the G′ and G″ at suitable dosages. The extracts elevated the gelatinization temperature of starch, but reduced enthalpy (ΔH). Moreover, the pasting viscosity of starch with WB extract decreased due to the combined effects of protein and ash fractions. These findings provide insights into the roles of water extracts from different WB layers and their components in modulating wheat-based product quality. This study also offers a theoretical basis for optimizing WB utilization in foods, thus providing a theoretical foundation for promoting whole-wheat foods or foods containing WB. Full article

The synergistic interactions between nitrogen doses and microbial inoculation in crops indicate the potential for integrated nutrient management strategies in plant cultivation. Therefore, this study investigated the interactive effects of nitrogen doses and Azospirillum brasilense inoculation on wheat flour characteristics in terms of the falling number and color parameters and yields of reducing sugars obtained by subcritical water hydrolysis (SWH) from wheat bran. The strip-plot experimental design, bifactorial with three replications, was applied. Factor A was three wheat cultivars: ORS Agile (AGI), ORS Feroz (FER), and TSZ Dominadore (DOM). Factor D was five nitrogen doses in the topdressing: 0, 20, 40, 60, and 80 kg ha⁻¹. The lowest value of falling number of 332 s was achieved with flour from FER cultivar using a nitrogen dose of 80 kg ha⁻¹ with A. brasilense inoculation. The SWH produced yields of reducing sugars (Y_RS) from wheat bran of up to 6.74 ± 0.18 g (100 g of wheat bran)⁻¹ for the cultivar DOM when using a nitrogen dose of 60 kg ha⁻¹ associated with A. brasilense inoculation. In this cultivation condition, the falling number was 408 s and the color parameters were L* of 92.49, a* of −0.26, and b* of 11.91. In the other conditions, the Y_RS ranged from 2.93 ± 0.63 to 6.52 ± 0.04 g (100 g of wheat bran)⁻¹. Both flour and bran are nutritional products with high application potential, and this study indicated SWH as a promising technique to dissociate the lignocellulosic complex of wheat bran without using hazardous solvents. Full article

Non-biodegradable plastic materials pose environmental hazards and contribute to pollution. Arabinoxylan (AX) films have been created for applications in food packaging to replace these materials. The water interaction characteristics of biodegradable AX films were assessed following the extraction of AX from dry-milled corn bran (DCB), wet-milled corn bran (WCB), and dried distiller’s grains with solubles (DDGS). Films were prepared with laccase and sorbitol before surface modification with lipase–vinyl acetate. Water solubility of the modified DCB films was significantly reduced (p < 0.05); however, the water solubility of modified WCB films decreased insignificantly (p > 0.05) compared to unmodified films. Water vapor permeability of the modified AX films from WCB and DDGS was significantly reduced (p < 0.05), unlike their unmodified counterparts. The biodegradation rates of the modified WCB AX and DDGS films increased after 63 and 99 days, respectively, compared to the unmodified films. The hydrophilic nature of AX polymers from WCB and DDGS enhances the biodegradability of the films. This study found that the modified WCB AX film was more hydrophobic, and the modified DDGS AX film was more biodegradable than the modified DCB AX film. Overall, surface modifications have potential for improving hydrophobicity of biopolymer films. Full article

Nanoemulsions represent a remarkable class of colloidal systems that play a pivotal role in the encapsulation, protection, and targeted delivery of active ingredients to the skin. One of the primary objectives in skincare science is to maximize the interaction between the active ingredients and the skin. This can be achieved through various mechanisms, two of which are occlusion and extended contact of the formulation with the skin. Cosmetic masks can be used to improve the skin’s hydration by creating a barrier that minimizes transepidermal water loss while acting as a repository of the active ingredient, increasing the skin’s absorption of the formulation’s active ingredients. In order to diminish the environmental impact, natural-polymeric-material masks are being used, as an alternative to synthetic materials, for its biocompatibility and biodegradability. In this work pectin and tapioca starch were used to develop a polymeric mask to deliver a rice bran oil nanoemulsion and study some characteristics of the final product. The results show that the association of pectin and tapioca starch can be used to produce a film that can be molded and shows occlusive effects, besides being flexible and compatible with the skin. Full article

Textile dyes are one of the major water pollutants released into water in various ways, posing serious hazards for both aquatic organisms and human beings. Bioremediation is a significantly promising technique for dye decolorization. In the present study, the fungal strain Lasiodiplodia sp. was isolated from the fruiting bodies of Schizophyllum for the first time. The isolated fungal strain was examined for laccase enzyme production under solid-state fermentation conditions with wheat bran (WB) using ABTS and 2,6-Dimethoxyphenol (DMP) as substrates, then the fermented wheat bran (FWB) was evaluated as a biosorbent for Congo red dye adsorption from aqueous solutions in comparison with unfermented wheat bran. A Box–Behnken design was used to optimize the dye removal by FWB and to analyze the interaction effects between three factors: fermentation duration, pH, and dye concentration. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM) were applied to study the changes in the physical and chemical characteristics of wheat bran before and after fermentation. An additional experiment was conducted to investigate the ability of the Lasiodiplodia sp. YZH1 to remove Congo red in the dye-containing liquid culture. The results showed that laccase was produced throughout the cultivation, reaching peak activities of ∼6.2 and 22.3 U/mL for ABTS and DMP, respectively, on the fourth day of cultivation. FWB removed 89.8% of the dye (100 mg L⁻¹) from the aqueous solution after 12 h of contact, whereas WB removed only 77.5%. Based on the Box–Behnken design results, FWB achieved 93.08% dye removal percentage under the conditions of 6 days of fermentation, pH 8.5, and 150 mg L⁻¹ of the dye concentration after 24 h. The fungal strain removed 95.3% of 150 mg L⁻¹ of the dye concentration after 8 days of inoculation in the dye-containing liquid culture. These findings indicate that this strain is a worthy candidate for dye removal from environmental effluents. Full article

The study investigated the extrusion modification of wheat bran and its effects on structural and rheological properties of wheat flour dough. Extruded bran showed better solubility of dietary fiber and structural porosity, leading to higher hydration and swelling power. Addition of extruded bran to dough caused water redistribution as an intensive aggregation of bound water to gluten matrix with reduced mobility. The bran–gluten interaction influenced by water sequestering caused partial gluten dehydration and conversion of β-turn into β-sheet, which demonstrated the formation of a more polymerized and stable gluten network. Farinographic data confirmed the promotion of dough stability with extruded bran addition at lower gluten content, while viscoelastic data suggested improved dough elasticity at all gluten contents by increasing elastic moduli and decreasing loss tangent. This study would be useful for interpreting the modification effect and mechanism of extrusion on cereal brans and provide valuable guidance for applying it as an effective modification technology on the commercial production of cereal bran and its flour products. Full article

This work evaluated the improvement effects of lipids incorporation on water resistance of composite biodegradable film prepared with wheat bran cellulose/wheat gluten (WBC/WG) using an alkaline–ethanol film forming system. Four types of lipids, paraffin wax (PW), beeswax (BW), paraffin oil (PO), and oleic acid (OA), were tested. We found that PW, BW, and PO incorporation at 5–20% improved water vapor permeability (WVP) and surface hydrophobicity of prepared films. Particularly, incorporation of 15% BW could best improve the water resistance properties of the film, with the lowest WVP of 0.76 × 10⁻¹² g/cm·s·Pa and largest water contact angle (WCA) of 86.18°. Incorporation of OA led to the decline in moisture barrier properties. SEM images revealed that different lipids incorporation changed the morphology and of the composite film, and cross-sectional morphology indicated BW-incorporated film obtained more uniform and compact structures compared to other films. Moreover, Fourier transform infrared spectra indicated that the incorporation of PW or BW enhanced the molecular interactions between the film components, confirmed by the chemical shift of characteristic peaks at 3277 and 1026 cm⁻¹. Differential scanning calorimetry results revealed that incorporation of PW, BW, and PO increased films’ melting point, decomposition temperatures, and enthalpy values. Furthermore, the presence of most lipids decreased tensile strength and elongation at the break of the film. Overall, the composite film containing 15% BW obtained the most promising water resistance performance and acceptable mechanical properties, and it thus most suitable as a hydrophobic biodegradable material for food packaging. Full article

This study aimed at elucidating the contribution of chemical interactions, water binding, and steric hindrance on the effect of wheat and oat brans and of their fractions, i.e., soluble and insoluble, on dough and bread properties. For such purpose, an inert filler, i.e., glass beads of comparable particle size and with no water binding capacity and moisture sorption properties, was also studied. The glass beads provided breads most similar to the control, indicating the limited role of steric hindrance. Brans and bran fractions showed distinct compositional and physical properties. The soluble fraction from oat bran, rich in β-glucan, was less hygroscopic than the wheat counterpart and could bind more water, resulting in larger detrimental effects on bread quality. The β-glucan content showed a prevalent role in affecting gluten development, the thermo-setting behaviour of the dough, and crumb texture, i.e., cohesiveness and resilience. Overall, the comparison between the two brans and their fractions indicated that the interplay between water binding, mainly provided by the insoluble fraction, and the plasticizing properties of the soluble bran fraction controlled the effects on bread volume and texture. From a compositional standpoint, β-glucan content was a determining factor that discriminated the effects of wheat and oat brans. Full article

Extrusion-cooking can be used to change the techno–functional and nutrition-related properties of wheat bran. In this study, pilot-scale (BC21) and industrial-scale (BC45) twin-screw extrusion-cooking using different types of extrusion (single-pass, double-pass and acid extrusion-cooking) and process parameters (temperature, moisture) were compared for their impact on wheat bran. When applying the same process settings, the higher strong water-binding capacity, extract viscosity and extractability displayed by bran extruded using the industrial set-up reflected a more considerable wheat bran structure degradation compared to pilot-scale extrusion-cooking. This was attributed to the overall higher specific mechanical energy (SME), pressure and product temperature that were reached inside the industrial extruder. When changing the type of extrusion-cooking from single-pass to double-pass and acid extrusion-cooking, wheat bran physicochemical characteristics evolved in the same direction, irrespective of extruder scale. The differences in bran characteristics were, however, smaller on industrial-scale. Results show that the differentiating power of the latter can be increased by decreasing the moisture content and increasing product temperature, beyond what is possible in the pilot-scale extruder. This was confirmed by using a BC72 industrial-scale extruder at low moisture content. In conclusion, the extruder scale mainly determines the SME that can be reached and determines the potential to modify wheat bran. Full article

Consumer demand for high protein content and plant-based fat has necessitated novel approaches to healthy food products. In response to this need, oleogels (OG) (structured liquid oils) emerged as a possible means of not only replacing saturated and trans fats but also delivering food protein. Nevertheless, an in-depth view of the structure of networks made of OG and protein is deficient. Hence, the objective of this study is developing oleocolloid (OC) (whey protein and rice bran wax OG) and hydro-oleocolloid (HOC) (OC + water) matrices with varying protein content (2.5–7.5%) to characterize their structural properties. Thermal analysis of the matrices via differential scanning calorimetry (DSC) documented the effects of hydrophobic interactions on the protein structure and its stability. Whey protein denaturation temperature increased from 74.9 °C to 102.8 °C in the presence of high oleic soybean oil. The effects of vegetable oil on WPI structure was also verified by FTIR spectroscopy. Data analysis revealed slight structural changes of the WPI secondary structure in the hydrophobic oil medium and the α-helix and β-sheet proportion in the emulsion medium was significantly altered. Similar analysis was performed in OC and HOC networks to quantify possible interactions between protein and rice bran wax. Results indicated that the protein was denatured during the thermal and mechanical conditions required for the oleogelation process, while it did not affect the systems’ solid fat content (SFC) and polymorphic patterns of the oleogels. However, DSC analysis showed different onset of melting for OC and HOC samples due to colloidal interactions between the protein and the lipid phase. The role of these chemistry was confirmed by microscopy analyses where OC and HOC matrices displayed notably different microstructural properties. The observed differences in the structural properties between OC and HOC matrices indicate the different colloidal interactions mediated by oleogelation process and the liquid medium type (oil vs. emulsion). Full article

The potential of extrusion-cooking to change the physicochemical characteristics of wheat bran, increase its nutritional value and decrease its recalcitrance towards fermentation was investigated in this study. The conditions in a twin-screw extruder were varied by changing screw configuration, moisture content and barrel temperature. The former was not previously investigated in studies on bran extrusion. Extrusion-cooking resulted in an increased water-holding capacity and extract viscosity of bran, suggesting shear-induced structure degradation and structure loosening due to steam explosion at the extruder outlet. Modelling showed that the extent of these modifications mainly correlates with the amount of specific mechanical energy (SME) input, which increases with an increasing number of work sections in the screw configuration and a decreasing moisture content and barrel temperature. Extrusion led to solubilisation of arabinoxylan and ferulic acid. Moreover, it led to starch melting and phytate degradation. Upon fermentation of the most modified sample using a human faecal inoculum, small numeric pH decreases and short-chain fatty acid production increases were observed compared to the control bran, while protein fermentation was decreased. Overall, extrusion-cooking can improve the nutrition-related properties of wheat bran, making it an interesting technique for the modification of bran before further use or consumption as an extruded end product. Full article

This research investigated the effect of sprouting on wheat bran. Bran from un-sprouted (BUW) and sprouted (BSW) wheat were characterized in terms of chemical composition, enzymatic activities, and hydration properties. In addition, the rheological properties (using GlutoPeak, Farinograph, Extensograph, and Rheofermentometer tests) and bread-making performance (color, texture, volume of bread) of wheat doughs enriched in bran at 20% replacement level were assessed. Sprouting process caused a significant decrease in phytic acid (~20%), insoluble dietary fiber (~11%), and water holding capacity (~8%), whereas simple sugars (~133%) and enzymatic activities significantly increased after processing. As regards the gluten aggregation kinetics, the BSW-blend profile was more similar to wheat than BUW-blend, indicating changes in the fiber and gluten interactions. BSW led to a worsening of the mixing and leavening properties, instead, no significant changes in extensibility were observed. Finally, BSW improved bread volume (~10%) and crumb softness (~52%). Exploiting bran from sprouted wheat might be useful to produce bread rich in fiber with enhanced characteristics. Full article

Biodegradable materials made from cereal arabinoxylan could provide an alternative source of packaging to replace current nonbiodegradable plastics. The main purpose of this research was to determine how arabinoxylan (AX) films made from wheat bran (WB) AX, maize bran (MB) AX, and dried distillers grain (DDG) AX made with either glycerol or sorbitol at varying levels (10, 25 or 50%) interacts with soil and water. The biodegradability of all films ranged from 49.4% biodegradable (DDG AX with 10% sorbitol) to 67.7% biodegradable (MB AX with 50% glycerol). In addition, the MB AX films with 25% sorbitol had the lowest moisture content at 9.7%, the MB AX films with 10% glycerol had the highest water solubility at 95.6%, and the MB AX films with 50% glycerol had the highest water vapor transmission rate (WVTR) at 90.8 g h⁻¹ m⁻². Despite these extreme trends in the MB AX films, the WB AX films were the least hydrophilic on average while the DDG AX films were the most hydrophilic on average. The 18 materials developed in this research demonstrate varying affinities for water and biodegradation. These materials can be used for many different packaging materials, based on their unique characteristics. Full article

The Australian dairy sheep industry is small and mostly based on a natural grass grazing system, which can limit productivity. The current study tested different plant oil-infused and rumen protected polyunsaturated fats and their interactions with sire breeds to improve lactation traits and body condition scores (BCS) of ewes grazing low quality pastures. It was hypothesised that supplementing lactating ewe’s diets with plant-derived polyunsaturated oils would improve milk production and composition without compromising BCS. Sixty ewes (n = 10/treatment) in mid-lactation, balanced by sire breed, parity, milk yield, body condition score, and liveweight, were supplemented with: (1) control: wheat-based pellets without oil inclusion; wheat-based pellets including; (2) canola oil (CO); (3) rice bran oil (RBO); (4) flaxseed oil (FSO); (5); safflower oil (SFO); and (6) rumen protected marine oil containing eicosapentaenoic acid and docosahexaenoic acid (RPO). Except for the control group, all supplementary diets included the same level of 50 mL/kg DM of oil and all diets were isocaloric and isonitrogenous. Experimental animals were grazed in the same paddock with ad libitum access to pasture, hay, and water during the 10-week study. RPO was the most effective diet that enhanced milk, fat, and protein yields by approximately 30%, 13%, and 31%, respectively (p < 0.0001). A significant increase in milk production was also observed with CO, RBO, and SFO treatments (p < 0.0001). Breed significantly influenced animal performance with higher milk yields recorded for crossbred Awassi × East Friesian (AW × EF) (578 g/day) vs. purebred Awassi (452 g/day) (p < 0.0001). This study provides empirical evidence for the use of rumen-protected and plant-derived oil-infused pellets as supplements under low quality pasture grazing conditions to improve the production performance of purebred Awassi and crossbred AW × EF ewes. Full article