Search Results (63)

Background and Objectives: Total hip arthroplasty (THA) following pelvic osteotomy for developmental dysplasia of the hip (DDH) is technically challenging due to altered acetabular morphology. This study aimed to compare radiographic cup position and perioperative characteristics of THA after three common pelvic osteotomies—periacetabular osteotomy (PAO), shelf procedure, and Chiari osteotomy—with primary THA in Crowe type I DDH. Methods: A retrospective review identified 25 hips that underwent conversion THA after pelvic osteotomy (PAO = 12, shelf = 8, Chiari = 5) and 25 primary THAs without prior osteotomy. One-to-one matching was performed based on sex (exact match), age (within 5 years), and BMI (within 2 kg/m²) without the use of propensity scores. Cup inclination, radiographic anteversion, center-edge (CE) angle, and cup height were measured on standardized anteroposterior radiographs (ICC = 0.91). Operative time, estimated blood loss, and use of bulk bone grafts or reinforcement rings were reviewed. One-way ANOVA with Dunnett’s post hoc test and chi-square test were used for statistical comparison. Results: Cup inclination, anteversion, and CE angle did not differ significantly among groups. Cup height was significantly greater in the PAO group than in controls (29.0 mm vs. 21.8 mm; p = 0.0075), indicating a more proximal hip center. The Chiari and shelf groups showed upward trends, though not significant. Mean operative time tended to be longer after PAO (123 min vs. 93 min; p = 0.078). Bulk bone grafts and reinforcement rings were more frequently required in the PAO group (17%; p = 0.036 vs. control), and occasionally in Chiari cases, but not in shelf or control groups. Conclusions: THA after PAO is associated with higher cup placement and greater need for reconstructive devices, indicating increased technical complexity. In contrast, shelf and Chiari conversions more closely resemble primary THA. Preoperative planning should consider hip center translation and bone-stock restoration in post-osteotomy THA. Full article

Background: Greater tuberosity fracture–dislocations (GTFDs) represent a distinct subset of proximal humerus fractures, occurring in up to 57% of anterior glenohumeral dislocations. Malreduction may result in impingement, instability, and functional limitation. Treatment is influenced by the displacement magnitude and direction, bone quality, and patient activity level. Methods: This narrative review was based on a comprehensive search of PubMed, Scopus, and Web of Science for English-language articles published between January 2000 and March 2025. Studies on pathomechanics, classification, diagnosis, treatment, and outcomes of GTFDs in adult and pediatric populations were included. Data were analyzed to summarize the current evidence and identify clinical trends. Results: A displacement ≥ 5 mm is the standard surgical threshold, though superior or posterosuperior displacement ≥ 3 mm—and ≥2 mm in overhead athletes—may justify surgery. Conservative treatment remains appropriate for minimally displaced fractures but is associated with up to 48% subacromial impingement and 11% delayed surgery. Surgical options include arthroscopic repair for small or comminuted fragments and open reduction and internal fixation (ORIF) with screws or plates for larger, split-type fractures. Locking plates and double-row suture constructs demonstrate superior biomechanical performance compared with transosseous sutures. Reverse shoulder arthroplasty (RSA) is reserved for elderly patients with poor bone stock, cuff insufficiency, or severe comminution. Pediatric cases require physeal-sparing strategies. Conclusions: GTFDs management demands an individualized approach based on fragment displacement and direction, patient age and activity level, and bone quality. While 5 mm remains the common threshold, lower cutoffs are increasingly adopted in active patients. A tiered treatment algorithm integrating displacement thresholds, fracture morphology, and patient factors is proposed to support surgical decision making. The incorporation of fracture morphologic classifications further refines fixation strategy. Further prospective and pediatric-specific studies are needed to refine treatment algorithms and validate outcomes. Full article

Background/Objectives: Rapidly progressive osteoarthritis of the hip (RPOH) has unique diagnostic and surgical challenges due to rapid joint degeneration and acetabular structural alterations. This study aimed to investigate correlations between preoperative spinopelvic geometry and anterior acetabular wall bone stock deficiency in RPOH patients and introduce an advanced imaging measurement techniques for cases with amputated femoral heads. Methods: A prospective observational study was conducted that enrolled 85 patients, comprising 40 with unilateral RPOH (Zazgyva Grade II or III) and 45 controls with primary osteoarthritis (OA). Preoperative spino-pelvic parameters (pelvic tilt—PT, sacral slope—SS, lumbar lordosis—LL, and T1 pelvic angle) and acetabular anterior wall characteristics (anterior center edge angle—ACEA, anterior wall index—AWI, and anterior acetabular surface area—AASA) were measured using standardized radiographic and CT imaging protocols, including a new methodology for acetabular center estimation in femoral head-amputated cases. Results: Significant differences were identified between RPOH and primary OA patients in the PT (22.5° vs. 18.9°, p = 0.032), SS (37.8° vs. 41.1°, p = 0.041), T1 pelvic angle (14.3° vs. 11.8°, p = 0.018), and anterior center edge angle (25.3° vs. 29.7°, p = 0.035). RPOH patients exhibited pronounced spinopelvic misalignment and anterior acetabular deficiencies. Conclusions: RPOH is associated with spinopelvic misalignment and anterior acetabular wall deficiency. Accurate preoperative diagnosis imaging and personalized surgical approaches specifically addressing acetabular bone stock deficiencies are mandatory in these cases. Full article

Stocking density is one of the major concerns in all production systems, which is why lawmakers, retailers, and consumers are increasingly concerned about this issue and its relation to animal welfare. The aim of this study was to identify if stocking density had an effect on white egg layer production, egg quality, bird health, and welfare parameters. For this study, five stocking densities were evaluated in colony cages: 1342 cm²/hen, 897 cm²/hen, 671 cm²/hen, 535 cm²/hen, and 445 cm²/hen. Egg production and physical egg quality were measured. Hen health and welfare parameters including corticosterone levels, H/L, oxidative stress pathways, jejunum tight junction protein expression, bone health, gut histology, body condition, and cytokine expression were evaluated. The results from this indicated that higher stocking densities resulted in lower production but larger eggs, while feed efficiency remained unaffected. Furthermore, physical egg quality parameters also remained unaffected. When stress and welfare parameters were analyzed, this research identified that decreasing stocking density did not affect jejunum oxidative stress pathways, pro-inflammatory cytokine expression, bone health, or intestinal health. At the final sampling period (69 weeks), the highest stocking density demonstrated higher corticosterone concentrations and IL-10 expression compared to the lowest stocking density. Furthermore, feather scores were found to be poorer as density increased. Finally, the highest density had higher Hansen’s test scores compared to other densities, which indicates a greater fear response. In conclusion, it appears that decreasing stocking density may provide some benefits in production and welfare to commercial egg layers, particularly at the end of the laying cycle. Full article

Background: Distal humeral shaft fractures (DHSFs) pose surgical challenges due to the proximity to the elbow joint, limited bone stock, and the risk of radial nerve injury. This study compared clinical and radiographic outcomes of anterolateral and posterior triceps-sparing approaches to determine the most effective surgical strategy. Methods: This multicenter retrospective study included 75 patients who underwent surgery for a DHSF between 2015 and 2021, with a minimum one-year follow-up, a distal fragment ≥3 cm, and no preoperative radial nerve injury. Fifty patients underwent anterior plating via anterolateral approach, and twenty-five underwent posterior plating. Clinical and radiographic outcomes were evaluated. Results: Bone union was achieved in 74 patients (98.7%), with no significant difference between the groups (p = 0.21). The anterolateral approach resulted in a shorter operative time (116 ± 29.4 vs. 143 ± 31.4 min, p = 0.03). However, intraoperative blood loss (p = 0.36), Mayo Elbow Performance Score (p = 0.71), range of motion (p = 0.36), and complication rates (p = 0.21) were not significantly different. Two cases of transient radial nerve palsy occurred in the posterior group (p = 0.17), and four cases required implant removal due to discomfort (p = 0.18) in the anterolateral group. Conclusions: Both approaches effectively treat DHSFs with high union rates and comparable functional outcomes. However, the anterolateral approach significantly reduces operative time due to supine positioning, direct access, and avoiding radial nerve dissection. Posterior plating remains viable when stable anterior fixation is unachievable. Further studies should assess the long-term outcomes and factors influencing approach selection. Full article

Background and Objectives: Reverse shoulder arthroplasty (RSA) is an effective surgical procedure for treating end-stage rotator cuff arthropathy, but it is burdened by a relatively high complication rate, mainly due to glenoid component failure. Preoperative planning and intraoperative navigation based on three-dimensional computed tomography (3D CT) scans have proven to be efficient tools for improving the accuracy and stability of the glenoid component. However, this technology is still developing, and there is currently little available research on the subject, especially where clinical outcomes are concerned. The purpose of this retrospective observational study is to report the radiographic and clinical outcomes of a consecutive series of patients that underwent RSA with the use of these new technologies, compared to a standard procedure. Materials and Methods: A consecutive series of 80 patients underwent RSA for shoulder osteoarthritis by a single surgeon at a single institution with a mean follow-up of 41.9 ± 23.6 months (range 24–108) and were divided into two groups according to the surgical technique employed (conventional or navigated surgery), and they were clinically and radiographically assessed at 1, 3, 6, and 12 months after surgery, and then annually. Results: No statistically significant differences were highlighted among the two groups according to complication rate, radiographical glenoid notching, and clinical outcomes. However, a statistically significant difference was observed in screw number and length and surgical time. In the navigated group, fewer screws with longer lengths had been implanted, with a longer surgical time. Conclusions: The use of 3D CT-based preoperative planning and intraoperative navigation is a safe procedure and produces comparable results with respect to standard instrumentation, without an increased risk of complications. It allowed to achieve higher stability of the implant, saving bone stock due to the use of fewer and longer screws than in a conventional procedure. This could also eventually result in a higher longevity of the implant itself. Full article

Stocking density (SD) may affect broiler productivity and welfare. This study investigated the performance and welfare of Ross 708 and Cobb 700 broilers as affected by four SDs (27, 29, 32, and 44 kg/m²) until day 56. A total of 432 birds per strain were used, with 10, 12, 14, and 18 birds per pen (1.1 m × 1.5 m), corresponding to the respective SDs. Each SD treatment comprised eight replicates. The target SD was determined based on the projected market weight of 4 kg at 56 days of age. The average body weight (BW), feed intake, and feed conversion ratio (FCR) were measured biweekly. Welfare indicators (four broilers per pen), including gait score, feather cleanliness, feather coverage, body temperature, and footpad condition, were evaluated on days 28 and 56. Tibia strength (two broilers per pen) was measured on day 56. The results show that the BW and FCR of both broiler strains were not affected by SD. For both strains, the male broilers exhibited greater bone strength compared to that of the female broilers (129.06 lbf M vs. 91.70 lbf F for Ross, and 130.86 lbf M vs. 117.40 lbf F for Cobb), but the influence of SD on bone strength was found to be significant only for the Ross male broilers. Most welfare indicators were not affected by the SD on days 28 and 56 for either broiler strain, except for feather cleanliness in Ross broilers and footpad in Cobb broilers on day 56, which improved at lower SDs. Strong age and sex effects on the welfare indicators were also identified for both broiler strains. It was concluded that the SD is not a significant factor for broiler productivity, and it has a minor influence on broiler welfare compared to those of age and sex. Full article

This study focuses on the development of polymer–bioglass composite bone scaffolds for the treatment of bone defects. PCL particles and 45s5 bioglass powder were employed as raw materials to fabricate PCL/45s5 composite wires with mass fractions of 5 wt%, 10 wt%, and 20 wt% via the twin-screw extrusion method. A cylindrical porous model was established using 3D modeling software, and a porous composite scaffold was constructed through the melt deposition manufacturing process. The macroscopical characterization of composite stock and composite powder was analyzed. The melt flow rate, water contact angle, elastic modulus, in vitro degradation rate, and antibacterial property of composite scaffold were measured. The experimental results showed that the incorporation of 45s5 bioglass into PCL material gave the composite better antibacterial properties, effectively reduced the flow rate of the material, increased the hydrophobicity of the material, and improved the rigidity and biocompatibility of the PCL material. This study offers initial insights into the use of synthetic bone tissue engineering scaffolds for clinical bone repair treatments. Full article

Background: Stem revisions in revision total hip arthroplasty (THA) with proximal bone stock loss may be dealt with utilizing modular, uncemented conical stems. During stem extraction, surgeons may resort to extended trochanteric osteotomy (ETO). However, ETO is associated with extensive blood loss and infections. This study compared the clinical outcomes, radiographic results and complications in THA revisions utilizing conical modular stem with and without ETO. Methods: Patients who underwent revision THA with or without ETO were assessed retrospectively. The minimal follow-up was 3 years. The functional evaluation included Harris Hip Score (HHS) and Short Form 36 (SF-36) as well as Western Ontario and McMaster Universities Arthritis Index (WOMAC) and Numerical Rating Scale for pain assessment. The radiographic evaluation comprised bone defect assessment, osteotomy healing, stem migration and position, presence of radiolucent lines and stress shielding. Results: In total, 73 patients (80 hips) were included in the final analysis. The ETO group comprised 48 hips, and the no-ETO group comprised 32 hips. In the ETO group, pre-operative WOMAC scores were lower than in the no-ETO group (p = 0.012). No significant differences were found in terms of post-operative HHS, WOMAC, and NRS scores between groups, except worse results were found in the case of claw plate implantation. Patients in the no-ETO group exhibited better results in SF-36 than in the ETO-group. Osteotomy non-union was observed in four hips (9.5%). Stam varus/valgus position was within ±1.5 degrees (85.9%). Conclusions: ETO does not adversely impact outcomes in patients undergoing femoral stem revisions with modular conical stems. The invasive nature of these procedures prompts careful consideration in each case individually. Full article

Bone has the ability to heal itself; however, bone defects fail to heal once the damage exceeds a critical size. Bone regeneration remains a significant clinical challenge, with autograft considered the ideal bone graft material due to its sufficient porosity, osteogenic cells, and biological growth factors. However, limitations to bone grafting, such as limited bone stock and high resorption rates, have led to a great deal of research into developing bone graft substitutes. The P28 peptide is a small molecule bioactive biomimetic alternative to mimic the bone morphogenetic protein 2 (BMP-2). In this study, we investigated the potential of P28-loaded hybrid scaffolds to mimic the natural bone structure for enhancing the bone regeneration process. We hypothesized that the peptide-loaded scaffolds and nude scaffolds both have the potential to promote bone healing, and the bone healing process is accelerated by the release of the peptide. To verify our hypothesis, C2C12 cells were evaluated for the presence of calcium deposits by histological stain at 7 and 14 days in cultures with hybrid scaffolds. Total RNA was isolated from C2C12 cells cultured with hybrid scaffolds for 7 and 14 days to assess osteoblast differentiation. The project findings demonstrated that the hybrid scaffold could enhance osteoblast differentiation and significantly improve the therapeutic effects of the scaffold in bone regeneration. Full article

This study aimed to retrospectively analyze the follow-up results of cases in which the adjacent joint was preserved using a custom-made uncemented short-stem design (hollow stem) with optional external flanches in tumor endoprosthetic replacement due to bone sarcomas in 13 patients (with an average age of 9.6 years) between 2017 and 2023. Reconstructions were proximal femur (n = 6), intercalary femur (n = 4), intercalary tibia (n = 2), and proximal humerus (n = 1) tumor prostheses. The hollow body was used distally in 10 of the megaprotheses, proximally in 1, and both proximally and distally in 2 of them. The average distance from the joints was 6 cm in stems with flanches and 11.8 cm in stems without flanches. No aseptic loosening or deep infection was observed during an average follow-up of 34 months. Except for one case with a tibial intercalary prosthesis that needed a revision, all cases were well osteointegrated and all lower extremity cases could bear full weight without pain. In cases where the remaining bone stock after bone resection is insufficient for a standard stem implantation, reconstruction with a patient-specific short hollow-stem design appears to be a good alternative to protect healthy joints with high prosthesis survival and low revision rates in the short-term follow-up. Full article

Introduction: In the last few years, short metaphyseal-socket prosthetic humeral stems have been introduced for reverse shoulder arthroplasty (RSA). A short stem may have advantages in humeral force distribution, reducing shear stress and preserving bone stock, keeping in mind the need for possible future revision surgery. The main objective of our study was to validate the use of a short stem prosthesis in the surgical treatment of humeral fractures by comparing clinical and radiological outcomes of our studied implant with those obtained with the use of traditional long-stem implants. Methods: In this multicentric, controlled prospective study, 125 patients with proximal three- or four-fragment humerus fractures were selected and treated with RSA. A short stem was used in group A (n = 53, mean age: 75.6 ± 5.6 years old), and a long stem was used in group B (n = 72, mean age: 71.76 ± 3). Active range of motion (ROM), Constant score (CS), Quick DASH, American Shoulder and Elbow Surgeons Shoulder (ASES) score, and Visual Analog Scale (VAS) scores were collected and analyzed at 2 years mean follow-up, as well as humeral and glenoid bone resorption (sum Inoue scores and Sirveaux scores were used). Results: No statistically significant differences were observed between group A and B in ROM, Constant score (51.69 ± 15.8 vs. 53.46 ± 15.96, p > 0.05), Quick DASH (31.5 ± 21.81 vs. 28.79 ± 13.72, p = 0.85), ASES (82.53 ± 17.79 vs. 84.34 ± 15.24, p = 0.57), or the VAS (0.53 ± 1 vs. 0.56 ± 1.07, p = 0.14) at the final follow-up. No statistically significant differences were found in the radiographic parameters between the two groups. No statistically significant differences were found for the average degree of humeral and glenoid bone resorption either. Conclusions: The use of a short metaphyseal-socket stem can be considered a safe, effective, and feasible option in reverse shoulder arthroplasty for treating proximal humerus fractures. Our results are encouraging, with no statistically significant differences identified between the proposed treatment and traditional long stems. Full article

Introduction: Launched in 2018 for revision total ankle arthroplasty (rTAA), the INVISION talar component addresses subsidence when poor talar bone stock is present. Due to the recency of the market-availability of the INVISION, studies evaluating its efficacy are lacking. This study presents the first analysis of early-term outcomes of patients undergoing rTAA with the INVISION talar component. Methods: This was a single-center, retrospective review of 28 patients undergoing rTAA with the INVISION talar component and INBONE II tibial component performed between 2018 and 2022. Data on preoperative characteristics, postoperative complications, secondary procedures, and survivorship were collected. The primary outcome measures were rates of major complications, re-operation, and implant failure. Secondary outcomes included post-operative changes in varus and valgus alignment of the tibia and talus. Results: The most common secondary procedures performed with rTAA were medial malleolus fixation (n = 22, 78.6%) and gastrocnemius recession (n = 14, 50%). Overall, 10.7% (n = 3) of patients underwent reoperation and 14.3% (n = 4) suffered major complications. Incidence of implant failure was 10.7% (n = 3). All reoperations were caused by infection. Mean varus alignment of the tibia and talus improved from 4.07 degrees and 4.83 degrees to 1.67 degrees and 1.23 degrees, respectively. Mean valgus alignment of the tibia and talus improved from 3.67 degrees and 4.22 degrees to 2.00 degrees and 2.32 degrees, respectively. Conclusions: In a series of 28 patients undergoing rTAA with the INVISION talar component, we discovered comparatively low rates of reoperation, major complication, and implant failure (10.7%, 14.3%, and 10.7%). The INVISION system appears to have a reasonable safety profile, but further studies evaluating long-term outcomes are required to assess the efficacy of the INVISION system. Full article

Accurate detection of implant loosening is crucial for early intervention in total hip replacements, but current imaging methods lack sensitivity and specificity. Vibration methods, already successful in dentistry, represent a promising approach. In order to detect loosening of the total hip replacement, excitation and measurement should be performed intracorporeally to minimize the influence of soft tissue on damping of the signals. However, only implants with a single sensor intracorporeally integrated into the implant for detecting vibrations have been presented in the literature. Considering different mode shapes, the sensor’s position on the implant is assumed to influence the signals. In the work at hand, the influence of the position of the sensor on the recording of the vibrations on the implant was investigated. For this purpose, a simplified test setup was created with a titanium rod implanted in a cylinder of artificial cancellous bone. Mechanical stimulation via an exciter attached to the rod was recorded by three accelerometers at varying positions along the titanium rod. Three states of peri-implant loosening within the bone stock were simulated by extracting the bone material around the titanium rod, and different markers were analyzed to distinguish between these states of loosening. In addition, a modal analysis was performed using the finite element method to analyze the mode shapes. Distinct differences in the signals recorded by the acceleration sensors within defects highlight the influence of sensor position on mode detection and natural frequencies. Thus, using multiple sensors could be advantageous in accurately detecting all modes and determining the implant loosening state more precisely. Full article

Reverse total shoulder arthroplasty (rTSA) is increasingly being used as a reliable option for various shoulder disorders with deteriorated rotator cuff and glenohumeral joints. The stemless humerus component for shoulder arthroplasties is evolving with theoretical advantages, such as preservation of the humeral bone stock and decreased risk of periprosthetic fractures, as well as clinical research demonstrating less intraoperative blood loss, reduced surgical time, a lower rate of intraoperative fractures, and improved center of rotation restoration. In particular, for anatomical total shoulder arthroplasty (aTSA), the utilization of stemless humeral implants is gaining consensus in younger patients. The current systematic review of 14 clinical studies (637 shoulders) demonstrated the clinical outcomes of stemless rTSA. Regarding shoulder function, the mean Constant-Murley Score (CS) improved from 28.3 preoperatively to 62.8 postoperatively. The pooled overall complication and revision rates were 14.3% and 6.3%, respectively. In addition, recent studies have shown satisfactory outcomes with stemless rTSA relative to stemmed rTSA. Therefore, shoulder surgeons may consider adopting stemless rTSA, especially in patients with sufficient bone quality. However, further long-term studies comparing survivorship between stemless and stemmed rTSA are required to determine the gold standard for selecting stemless rTSA. Full article