Search Results (42)

Volatile aromatic compounds (BTEX: benzene, toluene, ethylbenzene, and xylenes) are toxic and odor-active volatile organic compounds of environmental and health concern. Conventional biofiltration systems often rely on organic packing materials that deteriorate over time, motivating the evaluation of more durable inorganic alternatives. In this study, andesite, a volcanic rock, was assessed as a packing material in a laboratory-scale biotrickling filter (BTF) for the removal of BTEX from air streams. The reactor was operated under controlled conditions at different empty-bed residence times, and BTEX concentrations were monitored using TD-GC/MS. Removal performance was interpreted in relation to biofilm development, supported by physicochemical characterization of the packing material and contextual microbial analysis of the microbial community structure by amplicon sequencing. The results showed that the andesite-packed BTF achieved high BTEX removal efficiencies after an acclimation period, with stable operation under the tested conditions. Microbial analysis revealed the dominance of bacterial groups commonly associated with aerobic degradation of aromatic hydrocarbons. These findings indicate that andesite can function as a mechanically stable and biologically compatible inorganic support for BTEX treatment in biotrickling filters at the laboratory scale. The study is limited to bench-scale operation and community-level microbial analysis; therefore, further work is required to evaluate long-term performance, scale-up potential, and functional metabolic interactions. Full article

Dilute methane (CH₄) emissions from dairy barns (<500 ppm) are a challenging agricultural greenhouse-gas source to abate via biofiltration because its poor solubility makes gas–liquid mass transfer a primary limitation in biotrickling filters (BTFs). Here, we evaluated lab-scale BTFs for treating dairy-relevant CH₄ concentrations and tested two enhancement strategies: (1) aerosolised nutrient delivery to improve liquid distribution and (2) reduced liquid addition rates to increase gas–liquid mass-transfer efficiency. Liquid-fed BTFs and aerosol-fed BTFs (ABTFs) packed with scoria or glass beads were compared. Aerosolised nutrients reduced the elimination capacity (EC) compared to biotrickling delivery. Switching from liquid to aerosol decreased an initial EC of ~30 g m⁻³ h⁻¹ by 35% at 2500 ppm CH₄, and the original EC was not recoverable. Slower liquid addition consistently improved CH₄ removal for both delivery techniques. In a glass bead ABTF at 2500 ppm CH₄, the EC increased from 5.5 to 12.4 g m⁻³ h⁻¹ when the liquid coalescence rate decreased from 0.79 to 0.006 cm h⁻¹. In a scoria ABTF, a 1.5-fold increase in EC was observed as the rate decreased from 2.36 to 0.15 cm h⁻¹. Below a threshold liquid addition rate in the scoria BTF, the EC dropped ~33%, likely due to uneven wetting or high pH conditions. Therefore, optimising liquid delivery can significantly enhance BTF performance for agricultural CH₄ mitigation. Full article

Methane, a greenhouse gas which has a global warming potential 80 times greater than carbon dioxide on a 20-year time scale, greatly contributes to global warming. Removing 1 Gt of atmospheric methane by 2050 would limit global temperature increase from reaching 1.5 °C. Currently, biotrickling filter systems for removing atmospheric methane via methanotrophs exist, but not for very low methane concentrations (<1 v%). Recent work at the University of Washington to isolate and improve a microbial strain which thrives at 500 ppmv CH₄ has removed one obstacle in making this technology feasible. In this study, techno-economic and environmental life cycle assessment analyses conducted on this process have assessed its economic feasibility, greenhouse gas reduction potential, and possible areas of improvement. Study results show that at 500 ppmv CH₄, this process could remove atmospheric methane at a cost of USD 3992–5224/tCH₄. The best-performing case also produces annual net reductions in warming potential by 276–311 tCO₂e/120 m³ process unit deployed. Many opportunities exist to improve the outcomes of the baseline analysis even further, especially related to reducing the transport distance of media and harvested biomass. Full article

Volatile organic compounds (VOC) are major contributors to the burgeoning air pollution issue, predominantly from industrial areas, with well-documented environmental and health risks, which demand efficient and sustainable control policies. This review analyzes the current technological challenges and investigates recent developments in biological treatment technologies for VOC-contaminated off-gases, including biofilters, biotrickling filters, and bioscrubber, as well as emerging technologies, such as bioaugmentation and microbial fuel cells (MFCs). Operational performance, economic feasibility, and adaptability to various industrial applications are assessed, alongside opportunities for integration with other technologies, including energy recovery technologies. Biological systems offer considerable advantages regarding cost savings and lower environmental impacts and enhanced operational flexibility, particularly when combined with innovative materials and microbial optimization techniques. Nevertheless, challenges persist, such as choosing the best treatment settings suited to different VOC streams and addressing biofilm control concerns and scalability. Overall, biological VOC treatments are encouraging sustainable solutions, though continued research into reactor design, microbial dynamics, and MFC-based energetic valorization is essential for broader industrial application. These insights cover advancements and highlight the continuous need for innovative prowess to forge sustainable VOC pollution control. Full article

The removal of benzene, toluene, ethylbenzene, and xylene (BTEX) from air was investigated in two similar biotrickling filters (BTFs) packed with polyurethane (PU) foam, differing in terms of inoculation procedure (BTF A was packed with pre-incubated PU discs, and BTF B was inoculated via the continuous recirculation of a liquid inoculum). The effects of white rot fungi enzyme extract addition and system responses to variable VOC loading, liquid trickling patterns, and pH were studied. Positive effects of both packing incubation and enzyme addition on biotrickling filtration performance were identified. BFF A exhibited a shorter start-up period (approximately 20 days) and lower pressure drop (75 ± 6 mm H₂O) than BTF B (30 days; 86 ± 5 mm H₂O), indicating the superior effects of packing incubation over inoculum circulation during the biotrickling filter start-up. The novel approach of using white rot fungi extracts resulted in fast system recovery and enhanced process performance after the BTF acidification episode. Average BTEX elimination capacities of 28.8 ± 0.4 g/(m³ h) and 23.1 ± 0.4 g/(m³ h) were reached for BTF A and BTF B, respectively. This study presents new strategies for controlling and improving the abatement of BTEX in biotrickling filters. Full article

Volatile organic compounds (VOCs) pose significant risks to human health and environmental quality, prompting stringent regulations on their emissions from various industrial processes. Among VOCs, d-limonene stands out due to its low threshold and contribution to malodorous emissions. While biofiltration presents a promising approach for VOC removal, including d-limonene, a comprehensive understanding of its performance and kinetics is lacking. This study aims to comprehensively assess the performance of a lab-scale biotrickling filter in treating gas-phase d-limonene. The experimental results indicate that the biotrickling filter efficiently removed d-limonene, achieving a critical loading rate of 19.4 g m⁻³ h⁻¹ and a maximum elimination capacity of 31.8 g m⁻³ h⁻¹ (correspondingly, up to 85% removal) at the condition of 94.2 s of EBRT. Microbial activity played a significant role in biotrickling filter performance, with a strong linear correlation being observed between CO₂ production and substrate consumption. The Michaelis–Menten model was employed to represent enzyme-catalyzed reactions, suggesting no inhibition during biotrickling filter operation. Full article

A hybrid desulfurization process combining a physical filtration stage on cellular concrete (CC abiotic filter, called CCAF) and a biotrickling filter (called BTF) filled with expanded schist as packing material was used to remove high H₂S concentrations from a synthetic gas containing dinitrogen (N₂), dioxygen (O₂) and H₂S without the addition of a nutritive solution. Provided that small amounts of oxygen are present in the gas (1.2 ± 0.1% in volume), the global removal efficiency was 100%, and the global removal capacity reached 35 ± 2 gH₂S m⁻³ h⁻¹ for a total empty bed residence time (EBRT) of 120 s (CCAF + BTF). The resilience of the desulfurization process was demonstrated by applying severe changes in the H₂S concentrations, from 160 to 1150 ± 20 mg m⁻³ for an EBRT = 120 s. According to the performances of the abiotic filter, which can decline over time due to the lifetime of the cellular concrete (137 days), the biotrickling filter reacted either as a refining system or as an efficient system able to treat significant H₂S loading rates (up to 45 ± 3 gH₂S m⁻³ h⁻¹). Depending on the operating conditions, the increase in the pressure drops of the biotrickling filter (from 45 ± 3 to 234 ± 8 Pa m⁻¹) highlighted biomass accumulation, especially extremophilic Acidithiobacillus sp. Considering the cellular concrete abiotic filter alone, removal capacities of up to 56 ± 3 gH₂S m⁻³ h⁻¹ were recorded for an EBRT of 60 s, demonstrating that gases such as landfill biogas or household biogas could be efficiently treated using this simple technique. Full article

Biodesulfurization using biotrickling filters (BTFs) under anoxic conditions is a cost-effective method for biogas clean-up. To improve the performance of BTFs, the microbial consortia from the anaerobic pond of a swine farm (SW), the denitrification pond of a tuna factory (DN), and the UASB of the concentrated latex industry (LW) were immobilized on BTFs. In this study, the efficiency of BTFs immobilized with the microbial consortia for the reduction of H₂S gas combined with the reduction of nitrate contained in wastewater was investigated. The results showed that H₂S was completely removed at the inlet H₂S concentration of 207.8–1476 ppmv with wastewater circulation under anoxic conditions. However, only the DN-BTF achieved H₂S removal of 95.2% at an inlet concentration of 2500 ppmv. An increase in the N/S ratio (0.356–2.07 mol/mol) improved the H₂S removal of the SW-BTF, LW-BTF, and DN-BTF but not the BTF-C. Moreover, the DN-BTF had the highest nitrate removal rate (71.1%) with an N/S ratio of 2.07 mol/mol. When oxygen was supplied in wastewater at DO = 3.60 ± 0.41 mg/L, sulfate was generated at a higher rate, but nitrite production was lower than at DO~0. After microbial community analysis, Proteobacteria were the main phyla involved in the biodesulfurization process. Full article

In recent years, styrene waste gas has become a hot issue in the waste gas treatment industry due to its hydrophobicity and easy polymerization. This study is aimed at the problems of long empty bed residence time and low removal capacity of waste gas from styrene degradation by bio-trickling filter (BTF). A novel bio-trickling filter (NBTF) that we designed was used to explore the effects of styrene inlet concentration, empty bed residence time (EBRT), and starvation period on the performance of NBTF in the degradation of styrene waste gas. The experimental results show that the NBTF can be started in 17 days; when the inlet concentration was lower than 1750 mg/m³ and the EBRT was 59.66 s, the removal efficiency (RE) of styrene can reach 100%. When the inlet concentration was 1000 mg/m³ and the EBRT was greater than 39.77 s, styrene waste gas can also be completely degraded. The above proves that NBTF can complete the degradation of styrene waste gas with high concentration under the condition of short EBRT; in the whole operation process, the maximum elimination capability (EC) of styrene was 112.96 g/m³/h, and NBTF shows excellent degradation performance of styrene. When the starvation period was 2 days, 7 days and 15 days, respectively, NBTF can recover high degradation performance within 2 days after restart. The NBTF has good operation performance in 124 days of operation, which proves that the NBTF can effectively degrade styrene waste gas. This provides a reference basis for industrial treatment of styrene waste gas in the future. Full article

A pilot-scale biotrickling filter (BTF) was operated in counter-current flow mode under anoxic conditions, using diluted agricultural digestate as inoculum and as the recirculation medium for the nutrient source. The process was tested on-site at an agricultural fermentation plant, where real biogas was used. The pilot plant was therefore exposed to real process-related fluctuations. The purpose of this research was to attest the validity of the filtration process for use at an industrial-scale by operating the pilot plant under realistic conditions. Neither the use of agricultural digestate as trickling liquid and nor a BTF of this scale have previously been reported in the literature. The pilot plant was operated for 149 days. The highest inlet load was 8.5 gS-H₂Sm⁻³h⁻¹ with a corresponding removal efficiency of 99.2%. The pH remained between 7.5 and 4.6 without any regulation throughout the complete experimental phase. The analysis of the microbial community showed that both anaerobic and anoxic bacteria can adapt to the fluctuating operating conditions and coexist simultaneously, thus contributing to the robustness of the process. The operation of an anoxic BTF with agricultural digestate as the trickling liquid proved to be viable for industrial-scale use. Full article

Hydrogen sulphide (H₂S) and volatile methylsiloxanes (VMSs) are key pollutants from the point of view of the operators of biogas plants. H₂S poses corrosive hazards, while VMSs transform into difficult-to-remove deposits, reducing the availability and yield of biogas combustion equipment. This study provides a critical overview and evaluation (so-called SWOT analysis) of implemented and promising methods to reduce the content of the above pollutants in biogas, with particular emphasis on biological techniques. The aim of the analyses was to develop an innovative concept for a hybrid biological method for the combined removal of H₂S and VMSs using the same device, i.e., a two-phase biotrickling filter (BTF), in which the organic phase that intensifies the mass transfer of VMSs is in the form of a low-viscosity methyl silicone oil. The finally developed technological schematic diagram includes the basic devices and media streams. The concept is characterized by closed media circuits and comprehensively solves the problem of purifying biogas from sewage sludge. In conclusion, key issues requiring further research are identified. Full article

Odor ΨΩγemission has become mathvariant="normal" mathvariant="sans-serif-bold-italic" an important issue in kitchen waste management. Ammonia and hydrogen sulfide are the two most important odor sources as they contribute malodor and can cause health problems. As biotreatment and chemical treatment are two majorly applied technologies for odor control, in this study, they were used to remove ammonia and hydrogen sulfide and the performance of each process was compared. It was found that chemical absorption could efficiently eliminate both ammonia and hydrogenmathvariant="script" sulfide, and the removal efficiencies of ammonia and hydrogen sulfide highly depended on the pH of the adsorbent, contacting time, and gas and solution ratio (G/S). The ammonia-removal efficiency reached 100% within less than 2 s at G/S 600 and pH 0.1. The complete removal of hydrogen sulfide was achieved within 2 s at G/S 4000 and pH 13. Biotrickling filter showed better ability for hydrogen sulfide removal and the removal efficiency was 91.9%; however, the ammonia removal was only 73.5%. It suggests that chemical adsorption is more efficient compared to biotreatment for removing ammonia and hydrogen sulfide. In the combination of the two processes, biotrickling filter followed by chemical adsorption, the final concentrations of ammonia and hydrogen sulfide could meet the Level 1 standard of Emission Standards for Odor Pollution (China). The study provides a potential approach for odor control during kitchen waste aerobic composting. Full article

The purpose of this study was to evaluate the performance of laboratory-scale biotrickling filters (BTFs) packed with composite filler and pine bark filler under different operating conditions in purifying mixed gas containing H₂S and NH₃. The composite filler was prepared with modified activated carbon and loaded with functional microbes, using the microbial immobilization technology combined with a nutrient sustained-release composite filler. The results showed that the composite filler could better adapt to low empty bed retention time (EBRT) and high inlet concentration than the pine bark filler. When EBRT was 40 s and the inlet load was 41 g/m³·h, the NH₃ removal efficiency of the composite filler was kept above 80%, and when the inlet load was 61.5 g/m³·h, it could be stabilized at about 60%. When EBRT exceeds 34 s, the H₂S removal efficiency of the two BTFs was maintained at 100%. Yet, when EBRT was 34 s, the H₂S removal efficiency of the bark filler BTF dropped to <80%. The microbial diversity and richness of the bark filler BTF were significantly higher than those of the composite filler BTF, which had higher community similarity under each working condition. However, the proportion of predominant bacteria in the composite filler BTF was higher than that of the bark filler BTF. As the inlet load increased, the diversity of predominant bacteria of the composite filler BTF increased, which means that the predominant bacteria were less inhibited by high-concentration odorous gases. The predominant bacteria with deodorizing function in the composite filler BTF included Pseudomonas, Comamonas, and Trichococcus, which might jointly complete nitrogen’s nitrification and denitrification processes. The proportion of these three bacteria in the composite filler BTF was higher than in the bark filler BTF. Full article

This paper investigates the valorization potential of two biowaste types resulting from biotrickling filtration of volatile organic compounds (i.e., ethanol) and carbon dioxide from air by co-immobilized microalgae and compost heterotrophs, which were either attached on polypropylene spheres or entrapped within the alginate beads. In this regard, biomass samples from the surface of the packing spheres (S1) and the waste alginate beads (S2) underwent thermal and energy characterization via thermogravimetry and calorimetry techniques as a screening step for establishing some possible biomass valorization pathways. The heat release capacity (HRC) values for the samples S1 and S2 were 95.67 J/(g·K) and 44.11 J/(g·K), respectively, while the total heat release (THR) values were 11.03 kJ/g and 3.64 kJ/g, respectively. The results of this study indicate that the S1 biomass could be suitable for undergoing thermal decomposition processes-based applications, while the S2 biomass could have a potential application for improving flame retardancy of some materials. These findings show that the biowaste issued from such air biotreatment can become a valuable resource for different applications instead of being disposed of. Further research referring to the implementation of these solutions for the development of the final applications is needed. Full article

Large-flow waste gas generated from the pharmaceutical and chemical industry usually contains low concentrations of VOCs (volatile organic compounds), and it is also the key factor that presents challenges in terms of disposal. To date, due to the limitations of mass transfer rate and microbial degradation ability, the degradation performance of VOCs using the biological method has not been ideal. Therefore, in this study, the sludge from a chlorobenzene-containing wastewater treatment plant was inoculated into our experimental bio-trickling filter (BTF) to explore the feasibility of domestication and degradation of gaseous chlorobenzene by highly active microorganisms. The kinetics of its mass transfer reaction and microbial community dynamics were also discussed. Moreover, the main process parameters of BTF for chlorobenzene degradation were optimized. The results showed that the degradation effect of chlorobenzene reached more than 85% at an inlet concentration of chlorobenzene 700 mg·m⁻³, oxygen concentration of 10%, and an empty bed retention time (EBRT) of 80 s. The mass transfer kinetic analysis indicated that the process of chlorobenzene degradation in the BTF occurred between the zero-stage reaction and the first-stage reaction. This BTF contributed significantly to the biodegradability of chlorobenzene, overcoming the limitation of gas-to-liquid/solid mass transfer of chlorobenzene. The analysis of the species diversity showed that Thermomonas, Petrimona, Comana, and Ottowia were typical organic-matter-degrading bacteria that degraded chlorobenzene efficiently with xylene present. Full article