Search Results (171)

The Textiles and Clothing sector is increasingly focused on transitioning towards circular production, with industrial companies striving to integrate sustainable practices. Achieving this goal can involve the rapid adoption of innovative raw fibers (e.g., biodegradable and biobased materials) and maximizing the use of recycled and recyclable fibers. This implicitly demands acting on the total transparency of information along the complex supply chains in this sector to guarantee the correct adoption of these innovative fibers. It is precisely this complexity that hinders efforts to track and accurately disclose material usage. To address this issue, this paper presents a systematic literature review to explore the main challenges in adopting technologies like digital product passports, which can help track materials information along supply chains to support sustainable transitions. The analyzed articles were selected by excluding student thesis works, non-retrievable articles, papers that had a different focus, and literature published before 2020 or in non-institutional journals. The 53 resulting contributions are analyzed through a thematic analysis and discussed, focusing on identifying key material-related data that should be monitored to ensure responsible material use and strengthen sustainable production practices in the Textiles and Clothing sector, thereby guaranteeing control over material use and preventing premature disposal. Full article

Since the 1930s, polyamides (PAs) have become increasingly vital across industries like automotive, textiles, electronics, and packaging, owing to their exceptional properties. However, they also have notable limitations, including a tendency to absorb water, low dimensional stability, poor solubility, and the resulting processing challenges. From an environmental perspective, the reliance on fossil-based monomers for traditional PAs and the accumulation of post-consumer waste, due to their resistance to (bio)degradation, are key concerns. In recent decades, significant advancements have been made in synthesizing PAs from bio-based monomers, primarily sourced from inedible lignocellulosic materials. Some of these bio-based PAs exhibit properties comparable to their fossil-derived counterparts, with benefits like enhanced solubility, which simplifies processing. Moreover, certain bio-based variants have shown improved biodegradability, facilitating the potential recovery of monomers for the production of new virgin polymers and reducing waste accumulation. This review highlights the progress in developing PAs from commonly used bio-based sources, including lignin-derived aromatic compounds, terpenes, fatty acids, and furan derivatives, with a focus on the improvements made over their fossil-based analogs. Full article

Pectins are high-value plant cell-wall polysaccharides with extensive applications in the food, pharmaceutical, textile, paper, and environmental sectors. Traditional extraction and processing methodologies rely heavily on harsh acids, high temperatures, and non-renewable solvents, generating substantial environmental and economic costs. This review consolidates recent advances across the entire Bacillus–pectinase value chain, from green pectin extraction and upstream substrate characterization, through process and statistical optimization of enzyme production, to industrial biocatalysis applications. We propose a practical roadmap for developing high-efficiency, low-environmental-footprint enzyme systems that support circular bioeconomy objectives. Critical evaluation of optimization strategies, including submerged versus solid-state fermentation, response surface methodology, artificial neural networks, and design of experiments, is supported by comparative data on strain performance, fermentation parameters, and industrial titers. Sector-specific case studies demonstrate the efficacy of Bacillus pectinases in fruit-juice clarification, textile bio-scouring, paper bio-bleaching, bio-based detergents, coffee and tea processing, oil extraction, animal feed enhancement, wastewater treatment, and plant-virus purification. Remaining challenges, including enzyme stability in complex matrices, techno-economic scale-up, and structure-guided protein engineering, are identified. Future directions are charted toward CRISPR-driven enzyme design and fully integrated circular-economy bioprocessing platforms. Full article

Agricultural and food by-products offer valuable opportunities for circular and bio-based innovation across sectors. In the textile industry, replacing fossil-based coatings with sustainable alternatives is increasingly urgent. This study evaluates the performance of a textile coating based on coffee silverskin (CS)—an abundant by-product of coffee roasting—applied to four natural fibre substrates: cotton, lyocell, wool, and silk. A formulation combining 60% CS sludge (8% solids), treated by wet ball milling, with an aliphatic polyester-polyurethane dispersion was applied via knife coating. Standardised tests assessed mechanical resistance, air permeability, colour fastness, moisture management, and water repellency, including contact angle and drop absorption analyses. Results revealed that all substrates were compatible with the CS-based coating, which reduced air permeability and increased hydrophobicity. Notably, silk showed the most significant functional enhancement, transitioning from hydrophilic to waterproof with increased durability—indicating strong potential for technical applications such as outerwear and performance textiles. Given the renewable origin of both the substrate and coating, this study highlights the feasibility of valorising agri-food waste in high-performance, bio-based textile systems. These findings demonstrate the potential of CS as a bio-based coating for technical textiles, supporting the development of high-performance and sustainable materials within the textile industry. Full article

This study investigates how perceptual and emotional factors—perceived naturalness, aesthetic pleasure, environmental concern, and disgust—shape consumer acceptance of a human-hair-derived bio-fabricated textile product (a unisex cardholder). In a scenario-based online survey, participants viewed an AI-generated image accompanied by a short vignette. A purposive sample of young adults in Istanbul with prior experience purchasing sustainable textile products was recruited and screened. All constructs were measured with standard Likert-type scales and translated into Turkish using a two-way back-translation procedure. Data were analyzed with PLS-SEM. Model fit was acceptable, and the model accounted for a substantial share of the variance in adoption intention. Aesthetic pleasure showed a clear positive influence on adoption intention, whereas perceived naturalness did not display a direct effect. Environmental concern modestly strengthened the link between naturalness and adoption. Disgust emerged as the dominant moderator, fully conditioning the naturalness pathway and reducing—but not eliminating—the effect of aesthetic pleasure. Together, these findings indicate that perceived naturalness, aesthetic pleasure, environmental concern, and disgust jointly shape adoption intention and that practical emphasis should be placed on reducing feelings of disgust while enhancing aesthetic appeal. Full article

The fashion industry is facing increasing challenges related to textile waste and environmental pollution, driving the need for sustainable material innovations. Bacterial cellulose (BC), a biodegradable and non-polluting biomaterial, has emerged as a promising alternative for the sustainable transformation of fashion materials. Investigations into printing and dyeing techniques are expected to provide methodological frameworks for the design and functional application of BC materials, promoting their adoption and development in the fashion sector. This study, using the kombucha culture method, systematically investigated the cultivation, purification, plasticization, and drying processes of BC as a fashion material, examined its color characteristics using plant and reactive dyeing, and evaluated the effects of pattern printing and the feasibility of traditional plant pigment stencil printing, digital printing, and cyanotype printing on BC. Based on these printing and dyeing methods, digital printing combined with reactive dyeing—offering richer print effects, a wider color gamut, and higher rubbing fastness—was selected to realize the fashion design series Photosynthesis using BC as the primary material. This research contributes methodological insights into the integration of bio-based materials in fashion design and promotes the advancement of sustainable practices within the textile and apparel industries. Full article

Measuring the bioeconomy enables policymakers to monitor advancements in sustainable development goals, identify growth opportunities, comprehend the economic implications of bio-based products, assess environmental impacts, and shape policies that foster a sustainable economy reliant on renewable biological resources. For this purpose, this study measures the value of the bioeconomy in New Zealand using the latest published input–output table for the year 2020. This study estimates the size and economic significance of New Zealand’s bioeconomy by applying two complementary methodologies. Results indicate that, in 2020, the total value added by the bioeconomy ranged from NZD 48.8 billion to NZD 50.8 billion, representing 16.5% to 17.1% of the nation’s total value added. Agriculture emerged as the dominant contributor, accounting for approximately 89% of the sector’s total value added, followed by forestry and logging at around 11%. To identify potential growth areas, the analysis further disaggregated bioeconomy value added by economic subsectors. Among bio-based industries, food manufacturing was the largest contributor, generating 43.1% (NZD 21 billion) of total bioeconomy value added, followed by bio-based services at 12.9% (NZD 6.3 billion). The biotechnology sector contributed NZD 0.34 billion, equivalent to 0.7% of the total bioeconomy. Additional significant contributors included wood processing and manufacturing (3.3%; NZD 1.6 billion), construction (0.71%; NZD 0.35 billion), and textiles and clothing (0.58%; NZD 0.29 billion). These findings underscore the pivotal role of food manufacturing, services, wood processing, textiles and clothing, and construction in shaping the bioeconomy. They further highlight the importance of assessing the economic and environmental impacts of bio-based industries and formulating policy frameworks that support a sustainable, renewable resource-based economy. Full article

In this study, multifunctional nanocomposite membranes were fabricated using biopolymeric polylactic acid (PLA) and cellulose acetate (CA) composites via electrospinning. The hydrophobic nanocomposite membranes were reinforced with varying concentrations of silicon dioxide (silica/SiO₂) nanoparticles. The developed PLA–CA–SiO₂ nanofibrous membranes are characterized using field emission scanning electron microscopy (FE- energy-dispersive SEM), energy-dispersive X-ray (EDX), elemental mapping, X-ray diffraction analysis (XRD), Fourier-transform infrared spectroscopy (FT–IR), thermal gravimetric analysis (TGA), and differential scanning calorimetry (DSC) techniques. Various physical and mechanical properties of the bio-nanocomposite membrane, such as tensile testing, infrared thermal imaging, ultraviolet–visible spectroscopy (UV–Vis), water contact angle, hydrostatic pressure resistance, and breathability are also investigated. The analysis revealed that a small concentration of silica nanoparticles improves the morphological, mechanical, and thermal characteristics of nanocomposite membranes. The addition of silica nanoparticles improves the UV (A & B), visible and infrared blocking efficiency while also enhancing the waterproofness of protective textiles. The PLA–CA–SiO₂ biopolymer nanocomposite membrane has a fibrous microstructure and demonstrated the tensile strength of 11.2 MPa, a Young’s modulus of 329 MPa, an elongation at break of 98.5%, a hydrostatic pressure resistance of 27 kPa, and a water contact angle of 143.7°. The developed electrospun composite membranes with improved properties provide strong potential to replace petroleum-based membranes with biopolymer-based alternatives, promising improved and wider usage for bio-related applications. Full article

The outlook for biobased plastics in packaging applications is increasingly promising, driven by a combination of environmental advantages, technological innovation, and shifting market dynamics. Derived from renewable biological resources, these materials offer compelling benefits over conventional fossil-based plastics. They can substantially reduce greenhouse gas emissions, are often recyclable or biodegradable, and, in some cases, require less energy to produce. These characteristics position biobased plastics as a key solution to urgent environmental challenges, particularly those related to climate change and resource scarcity. Biobased plastics also demonstrate remarkable versatility. Their applications range from high-performance barrier layers in multilayer packaging to thermoformed containers, textile fibers, and lightweight plastic bags. Notably, all major fossil-based packaging applications can be substituted with biobased alternatives. This adaptability enhances their commercial viability across diverse sectors, including food and beverage, pharmaceutical, cosmetics, agriculture, textiles, and consumer goods. Several factors are accelerating growth in this sector. These include the increasing urgency of climate action, the innovation potential of biobased materials, and expanding government support through funding and regulatory initiatives. At the same time, consumer demand is shifting toward sustainable products, and companies are aligning their strategies with environmental, social, and governance (ESG) goals—further boosting market momentum. However, significant challenges remain. High production costs, limited economies of scale, and the capital-intensive nature of scaling biobased processes present economic hurdles. The absence of harmonized policies and standards across regions, along with underdeveloped end-of-life infrastructure, impedes effective waste management and recycling. Additionally, consumer confusion around the disposal of biobased plastics—particularly those labeled as biodegradable or compostable—can lead to contamination in recycling streams. Overcoming these barriers will require a coordinated, multifaceted approach. Key actions include investing in infrastructure, advancing technological innovation, supporting research and development, and establishing clear, consistent regulatory frameworks. Public procurement policies, eco-labeling schemes, and incentives for low-carbon products can also play a pivotal role in accelerating adoption. With the right support mechanisms in place, biobased plastics have the potential to become a cornerstone of a sustainable, circular economy. Full article

Accurate information on waste composition is essential for strategic planning in waste management and developing environmental technologies. However, detailed analyses of individual waste containers are both time- and cost-intensive, resulting in a limited number of available samples. Therefore, it is crucial to apply statistical methods that enable reliable estimation of average waste composition and its variability, while accounting for territorial differences. This study presents a statistical approach based on territorial stratification, aggregating data from individual waste container analyses to higher geographic units. The methodology was applied in a case study conducted in the Czech Republic, where 19.4 tons of mixed municipal waste (MMW) were manually analyzed in selected representative municipalities. The method considers regional heterogeneity, monitors the precision of partial estimates, and supports reliable aggregation across stratified regions. Three alternative approaches for constructing interval estimates of individual waste components are presented. Each interval estimate addresses variability from the random selection of waste containers and the selection of strata representatives at multiple levels. The proposed statistical framework is particularly suited to situations where the number of samples is small, a common scenario in waste composition analysis. The approach provides a practical tool for generating statistically sound insights under limited data conditions. The main fractions of MMW identified in the Czech Republic were as follows: paper 6.7%, plastic 7.3%, glass 3.6%, bio-waste 28.4%, metal 2.1%, and textile 3.0%. The methodology is transferable to other regions with similar waste management systems. Full article

This study explores the sustainable extraction and application of natural dyes from figs (Ficus carica) and Eucalyptus leaves using an aqueous alkaline medium. The dyeing process was optimized for cotton fabric using the exhaust-dyeing method. Fabrics dyed with Ficus carica extract and its blend with Eucalyptus exhibited enhanced color strength, excellent crocking fastness (rated 4–5), and good washing fastness (rated 3–4 on the gray scale). The use of Aloe barbadensis Miller as a bio-mordant significantly improved dye fixation, resulting in deeper, earthy shades, such as green, yellow–green, and yellowish brown. The highest K/S value (5.85) was recorded in samples treated with a mordant, sodium chloride (NaCl), and the combined dye extracts, indicating a synergistic effect among the components. Mosquito repellency tests revealed that treated fabrics exhibited up to 70% repellency, compared to just 20% in undyed samples. Antibacterial testing against E. coli showed that dyed fabrics achieved over 80% bacterial reduction after 24 h, indicating promising antimicrobial functionality. Air permeability slightly decreased post-dyeing due to the potential shrinkage in cotton fabrics. Furthermore, adsorption studies showed a removal efficiency of 57% for Ficus carica dye on graphene oxide (GO) under ultrasonication. These findings confirm the potential of GO as an effective adsorbent material for treating wastewater from natural textile dyes. Overall, the study highlights the environmental safety, functional performance, and multifunctional advantages of plant-based dyeing systems in sustainable textile applications. Full article

Electroless nickel deposition (ELD) is an autocatalytic technique extensively used to impart conductive, protective, and mechanical functionalities to inherently non-conductive synthetic substrates. This review systematically explores the fundamental mechanisms of electroless nickel deposition, emphasising recent advancements in surface activation methods, solvent systems, and microstructural control. Critical analysis reveals that bio-inspired activation methods, such as polydopamine (PDA) and tannic acid (TA), significantly enhance coating adhesion and durability compared to traditional chemical etching and plasma treatments. Additionally, solvent engineering, particularly using polar aprotic solvents like dimethyl sulfoxide (DMSO) and ethanol-based systems, emerges as a key strategy for achieving uniform, dense, and flexible coatings, overcoming limitations associated with traditional aqueous baths. The review also highlights that microstructural tailoring, specifically the development of amorphous-nanocrystalline hybrid nickel coatings, effectively balances mechanical robustness (hardness exceeding 800 HV), flexibility, and corrosion resistance, making these coatings particularly suitable for wearable electronic textiles and smart materials. Furthermore, commercial examples demonstrate the real-world applicability and market readiness of nickel-coated synthetic fibres. Despite significant progress, persistent challenges remain, including reliable long-term adhesion, internal stress management, and environmental sustainability. Future research should prioritise environmentally benign plating baths, standardised surface activation protocols, and scalable deposition processes to fully realise the industrial potential of electroless nickel coatings. Full article

The textile industry is progressively shifting towards more sustainable solutions, particularly in the field of printing technologies. This study reports the development and evaluation of water-based pigment inks formulated with bio-based pigments derived from intermediates produced via bacterial fermentation. Two pigments—indigo (blue) and quinacridone (red)—were incorporated into ink formulations and applied on cotton and polyester fabrics through valve-jet inkjet printing (ChromoJet). The physical properties of the inks were analyzed to ensure compatibility with the equipment, and printed fabrics were assessed as to their color fastness to washing, rubbing, artificial weathering, and artificial light. The results highlight the good performance of the bio-based inks, with excellent light and weathering fastness and satisfactory wash and rub resistance. The effect of different pre-treatments, including a biopolymer and a synthetic binder, was also investigated. Notably, the biopolymer pre-treatment enhanced pigment fixation on cotton, while the synthetic binder improved wash fastness on polyester. These findings support the integration of biotechnologically sourced pigments into eco-friendly textile digital printing workflows. Full article

The growing antimicrobial resistance and the increasing environmental concerns associated with conventional antibacterial agents have prompted a search for more effective and sustainable alternatives. Biopolymer-based nanofibers are promising candidates to produce environment-friendly antibacterial coatings, owing to their high surface-to-volume ratio, structural adaptability, and tunable porosity. These features make them particularly well-suited for delivering antimicrobial agents in a controlled manner and for physically modifying the surface of medical devices. This review critically explores recent advances in the use of electrospun fibers enhanced with natural antimicrobial agents as eco-friendly surface coatings. The mechanisms of antibacterial action, key factors affecting their efficacy, and comparisons with conventional antibacterial agents are discussed herein. Emphasis is placed on the role of a “green electrospinning” process, which utilizes bio-based materials and nontoxic solvents, to enable coatings able to better combat antibiotic-resistant pathogens. Applications in various clinical settings, including implants, wound dressings, surgical textiles, and urinary devices, are explored. Finally, the environmental benefits and prospects for the scalability and sustainability of green coatings are discussed to underscore their relevance to next-generation, sustainable solutions in healthcare. Full article

Fire-resistant coatings have emerged as crucial materials for reducing fire hazards in various industries, including construction, textiles, electronics, and aerospace. This review provides a comprehensive account of recent advances in fire-resistant coatings, emphasizing environmentally friendly and high-performance systems. Beginning with a classification of traditional halogenated and non-halogenated flame retardants (FRs), this article progresses to cover nitrogen-, phosphorus-, and hybrid-based systems. The synthesis methods, structure–property relationships, and fire suppression mechanisms are critically discussed. A particular focus is placed on bio-based and waterborne formulations that align with green chemistry principles, such as tannic acid (TA), phytic acid (PA), lignin, and deep eutectic solvents (DESs). Furthermore, the integration of nanomaterials and smart functionalities into fire-resistant coatings has demonstrated promising improvements in thermal stability, char formation, and smoke suppression. Applications in real-world contexts, ranging from wood and textiles to electronics and automotive interiors, highlight the commercial relevance of these developments. This review also addresses current challenges such as long-term durability, environmental impacts, and the standardization of performance testing. Ultimately, this article offers a roadmap for developing safer, sustainable, and multifunctional fire-resistant coatings for future materials engineering. Full article