Search Results (3,778)

Heavy metal contamination of foods remains a persistent global challenge for food safety and public health, driven by industrialization, mining activities, intensive agriculture, and ongoing environmental degradation. This scoping review synthesizes peer-reviewed literature on the occurrence of priority toxic metals—arsenic, cadmium, lead, mercury, and nickel—in food matrices, with emphasis on contamination pathways, analytical detection strategies, and documented human health effects. The reviewed studies reveal widespread accumulation of heavy metals in staple foods, including cereals, vegetables, seafood, and processed products, with concentrations frequently approaching or exceeding international regulatory limits, particularly in regions exposed to strong anthropogenic pressure. Conventional laboratory-based techniques, such as atomic absorption spectrometry and inductively coupled plasma methods, remain the reference standards for quantitative determination and regulatory compliance; however, their application to large-scale or continuous monitoring is often constrained by cost, infrastructure, and operational complexity. Consequently, increasing attention has been directed toward emerging detection approaches, including portable X-Ray fluorescence, Raman/SERS spectroscopy, electrochemical biosensors, electronic tongues, and in situ magnetic measurements, as complementary tools for rapid screening and field-based surveillance. Among these, environmental magnetism and in situ magnetic techniques stand out as non-destructive, low-cost proxies capable of identifying metal-associated particulate contamination linked to food production systems. Chronic dietary exposure to heavy metals is consistently associated with neurotoxicity, nephrotoxicity, carcinogenicity, and oxidative stress, underscoring the need for integrated, multi-tiered monitoring frameworks to support early detection, risk assessment, and prevention. Full article

The rapid translocation of pesticide and metal residues in the environment and their entry into the food chain pose a significant risk to human health. Given the high global consumption of honey, quality control emphasizes the need for continuous monitoring and risk assessment. To evaluate contamination levels in honey from northern Croatia, a region with intensive agricultural land use, 38 comb honey and 22 extracted honey samples were collected by purposive one-time sampling in June 2023. These samples were analyzed for 190 pesticides using liquid chromatography–tandem mass spectrometry (LC-MS/MS) and gas chromatography–tandem mass spectrometry (GC-MS/MS), and for 17 trace metal(loid)s using inductively coupled plasma mass spectrometry (ICP-MS). The highest detection frequencies were observed for fipronil-sulfone, trifloxystrobin, and coumaphos in comb honey, and for N-(2,4-dimethylphenyl)-formamide (DMF) and N-(2,4-dimethylphenyl)-N′-methylformamidine (DPMF) in extracted honey. Glyphosate was the only pesticide to exceed the European Union (EU) maximum residue level (MRL) of 0.05 mg/kg in three honey samples. Elemental analysis quantified most target metals, with aluminum (Al), copper (Cu), iron (Fe), manganese (Mn), nickel (Ni) and zinc (Zn) being the most abundant, while silver (Ag), arsenic (As), and selenium (Se) were not detected in this study. None of the samples contained lead (Pb) above the regulatory limit for honey established in the EU (0.1 mg/kg). To ensure food safety, further efforts are required to assess the health risks associated with exposure to these contaminants through consumption of the evaluated food. Full article

This study revises the genus Cyanoboletus (Boletaceae) in the Mediterranean Basin, integrating single-locus and multi-locus phylogenetic analyses (ITS, LSU, tef1-α, and rpb2), morphological characterisation, ecology, and arsenic accumulation in basidiomes. Morphological descriptions (including a new form, Cyanoboletus mediterraneensis f. pallidus), comprehensive sampling, type studies, biogeography, macro- and microphotographs, an identification key, and a historical overview of the nomenclatural issues surrounding C. pulverulentus, C. poikilochromus, and C. mediterraneensis are given. An epitype collection is designated for C. pulverulentus. A new method to measure spore suprahilar depression has been proposed, which allowed more clear morphological separation between C. mediterraneensis and C. pulverulentus. This method may prove useful for species delimitation in other fungal groups that have asymmetric basidiospores. Additionally, we generated a new ITS sequence of the C. sinopulverulentus holotype and inferred its conspecificity with the later described C. flavocontextus. Furthermore, notes on the taxonomy of Boletus gabretae are presented, and its placement in the genus Neoboletus is suggested. Cyanoboletus is confirmed as a strongly supported generic clade encompassing 21 monophyletic species-level clades, 14 of which represent known species, and seven are undescribed taxa. The synonymy of Cupreoboletus with Cyanoboletus is also verified. This publication provides the tools to delimit Cyanoboletus species that have important conservation value, which can be used by conservationists, ecologists, and citizen scientists. It also highlights species-specific arsenic hyperaccumulation in C. pulverulentus, contributing to a better understanding of fungal metal uptake. Our study indicates that within Cyanoboletus, only C. pulverulentus demonstrates this characteristic and is the only known member of Boletales that possesses a high arsenic accumulation ability. Full article

Background/Objectives: Staphylococcus aureus, particularly methicillin-resistant strains, is a leading cause of severe pneumonia. Understanding local molecular epidemiology, including virulence gene profiles and antimicrobial resistance (AMR) mechanisms, is crucial for effective infection control. This pilot study aimed to characterize S. aureus isolates from pneumonia patients in Karaganda, Kazakhstan. Methods: We collected 48 respiratory samples from patients with pneumonia across three medical institutions. Bacterial identification was performed using MALDI-TOF MS. Antimicrobial susceptibility testing (AST) was carried out using European Committee on Antimicrobial Susceptibility Testing (EUCAST) guidelines. Whole-genome sequencing of S. aureus isolates was conducted on an Ion Torrent S5 platform. Genomic analysis included multilocus sequence typing (MLST), identification of virulence and AMR genes, and phylogenetic reconstruction. Results: S. aureus was identified in 14.6% (n = 7) of pneumonia cases included in this study. All isolates (100%, n = 7) were phenotypically resistant to benzylpenicillin. The mecA gene was detected in 57.1% of isolates (n = 4), while phenotypic resistance to methicillin was observed in 28.6% (n = 2) of the isolates. Resistance to azithromycin (57.1%, n = 4) and levofloxacin (42.9%, n = 3) was observed among the isolates. Two isolates (28.6%) were multidrug-resistant (MDR). Genomic analysis revealed the prevalence of the ST22 clone (57.1%, n = 4) in the studied cohort. Other sequence types were ST97, ST8, and ST45 (14.3% each). Phylogenetic analysis showed clustering consistent with MLST profiles. All isolates carried a conserved core virulence arsenal, including hemolysin (hla, hlg), biofilm-forming genes (icaADBC), immune evasion genes (sak, scn), and iron acquisition genes (isd). The Panton–Valentine leukocidin (PVL) genes were detected in three isolates. AMR gene analysis revealed the ubiquitous presence of mepA and tetracycline efflux pump genes, along with regulatory genes (arlRS, mepR, mgrA). The blaZ and ermA genes were not detected despite high phenotypic resistance to penicillin and macrolides. Conclusions: This study reports the identification of the virulent and resistant ST22 S. aureus clone in pneumonia cases in Karaganda, Kazakhstan. The discordance between phenotypic and genotypic AMR profiles underscores the necessity for integrated diagnostic approaches. Full article

Lysobacter antibioticus Hz25 is a novel strain that was isolated from the rhizosphere of the relict endemic plant Hedysarum zundukii Peschkova (Fabaceae), which grows on carbonate soils in the Baikal region of Russia. This work presents the complete genome sequence of Hz25 (5.98 Mb, 66.94% GC), which was obtained using a hybrid assembly method combining Oxford Nanopore and Illumina sequencing. Phylogenetic analysis based on 47 Lysobacter genomes and an average nucleotide identity (ANI) value of 96% confirmed its affiliation with L. antibioticus. A comparative pan-genome analysis with three closely related strains (13-6, 76, and ATCC 29479) identified 554 strain-specific genes. This significant genomic plasticity likely reflects adaptation to the sharply continental climate, high insolation, and low free iron content of the native soil. The genome encodes a comprehensive micropredator arsenal, including: seven chitinase genes (GH18 and GH19 families); bacteriolytic enzymes (Blp, L1, L4, Ami); a complete type III secretion system (T3SS) with predicted effectors; type IV pili (including the PilZ-PilB regulatory complex); and siderophore biosynthesis genes (lysochelin). The genome contains genes ars of an arsenic resistance system, but lacks the ACR3 efflux pump, suggesting that these genes may have alternative functions. Genes involved in calcium homeostasis (Excalibur domain, Na⁺/Ca²⁺ antiporter) were also identified. These features make Hz25 a promising candidate for biocontrol applications in cold climates and metal-contaminated environments. Full article

Arsenopyrite (FeAsS) is an important sulfide that holds gold in orogenic systems. Its arsenic content is often used as a proxy for gold fertility. However, arsenopyrite from the Um Rus gold deposit in Egypt’s Central Eastern Desert shows a complicated gold distribution that makes simple Au-As correlations hard to make. Integrated electron microprobe analysis (EMPA), laser ablation ICP-MS, and principal component analysis (PCA) reveal three unique textural and geochemical domains. Fine-grained arsenopyrite inclusions within pyrite aggregates (28–31 at% As) are devoid of detectable gold; PCA elucidates 84% of their variance through Fe–S versus Co-As substitution (PC1: 61.8%) and Pb-decoupled variability (PC2: 22.2%), suggesting crystallization from a Co-rich, Au-poor fluid. On the other hand, coarse oscillatory-zoned arsenopyrite can hold up to 6154 ppm of invisible gold. This is because of a moderate Au-As substitution (R = 0.41063, p = 0.08074) that was overprinted by a separate Au-Ag-Sb-Te hydrothermal pulse (Au–Ag: R = 0.97762; Au–Sb: R = 0.97608). PCA finds four parts (72.8% variance): Ag-Cu-As associations (PC1: 25.1%), Te versus Bi-Au signatures (PC2: 17.8%), Fe–S stoichiometry (PC3: 17.1%), and an Au versus Pb-decoupled event (PC4: 12.9%). This shows that minerals formed in more than one stage. Irregular As-rich overgrowths, containing ≤950 ppm gold and lacking significant Au–As correlation (R = −0.14011, p = 0.56726), show PCA (74.3% variance) that highlights S-As contrasts (PC1: 25.2%), Co-Ni enrichment (PC2: 18.8%), Cu-Fe-Ni associations (PC3: 16.2%), and a late Au-decoupled event (PC4: 14.2%), indicating barren recrystallization. These results show that just adding arsenic is not a good way to tell if gold is fertile. The highest amounts of invisible gold, on the other hand, are found in oscillatory-zoned domains with Ag-Sb-Te signatures. This research highlights the importance of combining PCA, geochemistry, and microtextures to differentiate auriferous from barren arsenopyrite, thereby enhancing exploration methodologies for structurally intricate orogenic gold systems. Full article

Dissolved silicic acid (Si) in groundwater can reduce the As-removal performance of adsorbents used for treating contaminated water. However, its effects on Mg-based adsorbents remain largely unexplored. In this study, As-removal tests were conducted under various test conditions to evaluate the suitability of Mg-based adsorbents (MgO, Mg(OH)₂, and MgCO₃) for the purification of As-contaminated water in the presence of Si. As-removal performance varied significantly depending on the Mg-based adsorbent type and dosage (W_Ad0/V), As valence, and the initial As and Si (C_Si0) concentrations. In some cases, As removal improved at relatively low C_Si0; however, overall performance decreased with increasing C_Si0 for all Mg-based adsorbents. Moreover, compared with Mg(OH)_2, the performance of MgO and MgCO₃ was more strongly affected by Si. This inhibition is attributed to competition between Si and As for adsorption sites on the adsorbent surface. Furthermore, for MgO and MgCO₃, the amount of As removed by coprecipitation with secondarily generated Mg(OH)₂ aggregates was inferred to decrease with increasing C_Si0, because higher C_Si0 lowered the solution pH. Overall, MgO and Mg(OH)₂ can function effectively as adsorbents for As treatment when W_Ad0/V is appropriately selected, considering the range of Si concentrations typically found in groundwater. Full article

Groundwater in uranium mining areas is highly sensitive to pollution by radionuclides and toxic elements, especially under in situ leaching mining, which increases their mobility. This study assesses the radiological and chemical features of water sources in the Chu-Sarysu uranium province (Kazakhstan) by evaluating the annual effective dose (AED) from radionuclide ingestion. In total, 98 water samples from boreholes, wells and rivers were analyzed for total alpha and beta activity, followed by radionuclide and chemical analysis of selected samples. High total alpha activity was detected mainly in groundwater and was associated with radium mobilization. On average, ²²⁸Ra constituted between 50% and 60% of the total AED, whereas ²²⁶Ra contributed between 35% and 45%, with uranium isotopes contributing less than 5%. The total AED value for the groundwater ranged from 0.14 to 0.52 mSv/year at average water use, but only one borehole sample had 9.07 mSv/year, reflecting a localized anomaly. Additionally, arsenic, manganese, and mercury displayed high spatial variability. These findings underscore radium’s significant role in radiation exposure and emphasize the need for comprehensive monitoring of both radiological and chemical contaminants in groundwater systems. Full article

This study aims to evaluate the blanching process of wasted Undaria pinnatifida as a ruminant feed source by assessing chemical compositions, in vitro nutrient digestibility, rumen fermentation characteristics, greenhouse gas emissions, and rumen microbes. The blanching process was conducted at different temperatures (15 vs. 80 vs. 90 °C) and times (2 vs. 4 min) to assess the chemical and mineral contents. Supplementation levels of U. pinnatifida (0 vs. 0.5 vs. 1 vs. 2%) were observed with the blanching process (non-blanching (NBL) vs. blanching (LOS)). Increasing blanching temperature and time decreased (p < 0.05) dry matter, crude ash, and the mineral contents, including sodium, phosphorus, and arsenic. Moreover, LOS treatment increased (p < 0.01) in vitro dry matter and neutral detergent fiber digestibility, ruminal pH, and the acetate-to-propionate ratio, but reduced (p < 0.01) CH₄ (mL/g NDFD). Additionally, 2% of LOS treatment reduced the abundance of protozoa, fungi, fibrolytic microbes, methanogenic archaea, Methanobrevibacter ruminantium, Methanosarcina barkeri, and Methanosphaera stadtmanae (p < 0.01). Therefore, blanching at 80 °C for 2 min improved the nutritional profile by reducing antinutritional minerals. Subsequent in vitro fermentation suggested that supplementing the diet with 0.5–1% of LOS improved digestibility and altered fermentation, potentially reducing methane yield (per NDFD). Full article

This study aimed to investigate whether mixed heavy metal exposure (lead, cadmium, manganese, and arsenic) during pregnancy induces gestational diabetes mellitus (GDM)-like phenotypes and to explore the associated molecular alterations. We examined the effects of exposure on metabolic disturbances using a Sprague-Dawley rat model exposed to low- and high-dose mixed heavy metals, with doses selected based on biomonitoring data. The results showed that high-dose mixed heavy metal exposure significantly increased blood glucose levels in rats, elevated the area under the curve (AUC) during the oral glucose tolerance test (OGTT), and induced insulin resistance and dyslipidemia. Concurrently, pathological examinations revealed hepatocyte steatosis, inflammatory cell infiltration, and mitochondrial abnormalities in liver tissues. Transcriptomic and metabolomic analyses identified significant disruption of the glycerophospholipid metabolic pathway following heavy metal exposure, suggesting the involvement of this pathway in the observed metabolic disturbances. Lasso regression analysis identified Insig1 as a candidate gene associated with lipid metabolic alterations, a finding subsequently validated by qPCR. Overall, mixed heavy metal exposure during pregnancy was associated with GDM-like metabolic abnormalities in rats. Disruption of glycerophospholipid metabolism and altered Insig1 expression likely contribute to these effects, providing molecular evidence linking mixed heavy metal exposure to gestational metabolic dysfunction. Full article

Seaweeds are photosynthetic organisms with ecological, social, and economic significance, and they serve as effective bioindicators in marine ecosystems. This study assessed trace element concentrations in beach-cast seaweeds collected from four beaches along the Espírito Santo coast in southeastern Brazil—an area impacted by mining-related contamination. Samples of Zonaria tournefortii (J.V. Lamouroux) Montagne and Sargassum natans (Linnaeus) Gaillon, gathered during low tide (July–August 2022), were analyzed for 15 elements. Statistical analysis using the Kruskal–Wallis test revealed significant interspecific differences in the accumulation of several metals. Aluminum (Al), iron (Fe), and magnesium (Mg) were the most abundant (>100 mg/kg), while minor elements (<100 mg/kg) included barium (Ba), arsenic (As), zinc (Zn), vanadium (V), nickel (Ni), chromium (Cr), copper (Cu), lead (Pb), cobalt (Co), cadmium (Cd), silver (Ag), and mercury (Hg). Elemental profiles exceeded those reported in other global regions and closely resembled iron ore tailings. Most elements had relatively higher concentrations on the beaches of Imigrantes, in the north of the state. These findings are the first for beach-cast seaweeds in this region, suggesting that this contamination indicates the legacy of the mining industry from southeastern Brazil. Full article

Revitalisation of contaminated brownfield sites is essential for sustainable development, particularly near sensitive ecological areas like Natura 2000 sites. The lagoon in Slovenia’s Regional Park Šturmovci, an artificial wastewater convergence point created during hydroelectric construction, is a highly relevant example. This study integrates geochemical, mineralogical and isotopic analyses to identify sources and controlling mechanisms of contaminant distribution in lagoon sediments and assess their transfer to nearby agricultural soils during flooding events. Results indicate anaerobic conditions, with depth-related shifts in phosphorus, sulphur and redox-sensitive elements, such as rare earth elements (REE), arsenic (As), barium (Ba), cobalt (Co), chromium (Cr), lead (Pb) and vanadium (V), as well as fluctuations in pyrite-rich laminated layers, suggesting potential flood-driven remobilisation of trace elements. Lagoon sediments are highly contaminated with As (73 mg kg⁻¹), Ba (247 mg kg⁻¹), Pb (97 mg kg⁻¹) and Zn (1118 mg kg⁻¹), with elevated concentrations also observed in agricultural soil, all exceeding respective limit values of 20, 160, 85 and 200 mg kg⁻¹. Pollutant concentrations were highest near wastewater inflows and decreased with distance, with nitrogen isotopic patterns indicating partial nitrification and surface ammonium accumulation, reflecting intensive agricultural inputs in the area. High enrichment factor (EF > 20) and geoaccumulation index (I_geo > 3) values, in particular for As, Cd and Zn, indicated severe contamination and highlighted the urgent need for effective remediation strategies, including immobilisation using biochar or cement-based binders, as well as phytoremediation approaches. Full article

The increase in multidrug resistance in microorganisms and the rise of emergent infectious diseases worldwide is a threat to human and animal health. Therefore, research on new molecules with antibiotic potential is a priority. Lichens have a unique secondary metabolism with relatively untapped potential, yet their essential oils (EOs) and volatile organic compounds (VOCs) remain a relatively untapped resource. This systematic review was conducted following PRISMA 2020 guidelines, with a comprehensive search performed in the Web of Science database for studies published up to 2023. From 254 identified records, six studies involving nine lichen species (Evernia prunastri, Evernia divaricata, Cladonia rangiformis, Cladonia furcata, Parmotrema perlatum, Lichina pygmaea, Parmelia perlata, Hypogymnia physodes, and Parmelia sulcata) met the eligibility criteria. The synthesized data show that these volatile fractions possess significant antimicrobial potential, with minimum inhibitory concentrations (MICs) generally lower than 1 mg/mL. Major bioactive constituents identified include atraric acid, orsellinates, and various sesquiterpenes. While the current evidence highlights a strong potential of lichen volatiles against pathogens, research is limited to a small fraction of known species. This review identifies a critical gap in testing these compounds directly against MDR clinical isolates and suggests that future research should focus on high-biomass species and the heterologous expression of lichen biosynthetic genes to develop sustainable antimicrobial applications. Full article

Arsenic contamination in groundwater is a severe and widespread environmental and public health challenge. Recent years have witnessed rapid advances in catalytic remediation technologies, particularly those integrating advanced oxidation processes (AOPs), bifunctional materials, and field-scale applications. This comprehensive review synthesizes recent developments, emphasizing the synergy between catalytic oxidation and adsorption, the design of innovative and recyclable materials, and the practical translation of laboratory findings to real-world remediation scenarios. Key breakthroughs include dual-function catalysts for combined contaminant removal, scalable systems compatible with renewable energy, and hybrid strategies integrating conventional and catalytic routes. Case studies from arsenic hotspots worldwide demonstrate not only technological feasibility but also highlight knowledge gaps and sustainability challenges. By evaluating catalytic mechanisms, operational performance, and environmental impact, this review identifies promising directions for the next generation of arsenic remediation and offers a critical roadmap to guide future research and practice. Full article

Arsenic contamination in polymetallic mining areas is closely linked to surrounding iron-rich manganese minerals. However, conclusive evidence remains limited regarding the retention and migration process of As(V) in naturally manganese-rich manganese ores (especially those with different manganese/iron mass ratios) under dynamic flow conditions. This study investigated As(V) adsorption and transport by four natural manganese minerals (FM1–FM4) through batch/column experiments, characterization, and numerical modeling. Their Mn/Fe mass ratios were 22.7 for FM1, 4.2 for FM2, 3.7 for FM3, and 16.4 for FM4. Batch experiments showed that As(V) adsorption on FM1–FM3 was better described by the Freundlich model, indicating heterogeneous adsorption behavior. Under the tested experimental conditions, the apparent Langmuir qₘ values of these minerals decreased from 0.066 to 0.015 mmol·g⁻¹ with decreasing Mn/Fe ratio. However, As(V) adsorption on FM4, which had the lowest Mn and Fe contents, followed the Langmuir model (qₘ = 0.012 mmol·g⁻¹), suggesting monolayer adsorption. Column experiments demonstrated rapid As(V) retention for all minerals. In the time domain, increasing the flow rate from 0.5 to 2.0 mL·min⁻¹ generally advanced breakthrough and shortened the desorption tail, although the breakthrough behavior expressed in pore-volume coordinates was not strictly monotonic for all minerals. The Two-Site Kinetic Attachment Model (TSKAM) successfully simulated these dynamics (R² > 0.90, RMSE < 0.05), revealing adsorption controlled by fast and slow kinetic sites, with slow-site contributions diminishing at higher flow rates. Characterization results indicated that adsorbed arsenic on FM1 remained mainly as As(V) and was immobilized primarily through surface complexation involving surface hydroxyl and Fe/Mn–O groups. XRD and SEM-EDS suggested the participation of Fe/Mn-bearing phases, while XPS on FM1 showed pronounced changes in Mn surface species during adsorption. Therefore, As(V) removal by these natural manganese minerals is a coupled physicochemical process influenced by both mineral properties, including Mn/Fe ratio, specific surface area, pore structure, pH_PZC, and Mn surface-state changes, and hydrodynamic conditions in the polymetallic mining areas. Full article