Search Results (886)

A nanoparticle formulation was generated from distiller dried grains with solubles (DDGS), and its effect on the production of anthraquinones (AQs) was evaluated on Rubia tinctorum hairy roots. The DDGS material was washed with water and ethyl acetate to remove mainly the soluble organic/inorganic molecules and reduce the fat content, respectively, followed by an alkaline treatment to remove the polysaccharides. The resulting alkaline solutions were then lyophilized and redispersed in deionized water to generate a monodispersed nanoparticulate formulation (DDGS-NP) with a hydrodynamic diameter and zeta potential of 227 ± 42 nm and −53 ± 7 mV, respectively. The formulation demonstrated good colloidal stability over time, and sterilized DDGS-NPs maintained comparable physicochemical properties. The nanoparticles were enriched in protein fractions, unsaturated fatty acids, and orthophosphate anion components from DDGS, as determined by solid-state Nuclear Magnetic Resonance (NMR), X-ray photoelectron spectroscopy (XPS), organic elemental analysis (OEA), and inductively coupled plasma optical emission spectrometry (ICP-OES) techniques. The DDGS-NPs were tested at different concentrations on Rubia tinctorum hairy roots, in comparison to or in combination with methyl jasmonate (MeJ), for their capacity to induce the production of AQs. All DDGS-NP concentrations increased the production of specific AQs to 7.7 (100 mg L⁻¹), 7.8 (200 mg L⁻¹), and 9.3 µmol/gFW (500 mg L⁻¹), with an extracellular AQ accumulation of 18 µM for the highest DDGS-NP concentration, in comparison with the control hairy roots (~2 µM AQ). The plant growth was not affected at any of the tested nanoparticle concentrations. Interestingly, the combination of DDGS-NPs and MeJ resulted in the highest extracellular AQ accumulation in R. tinctorum root cultures. Full article

The enhancement of flavonoid content and antioxidant capacity in plants remains a significant area of focus in the investigation of plant-derived functional foods. This study systematically investigated the impact of exogenous zinc sulfate (5 mM ZnSO₄) stress on flavonoid content and antioxidant capacity in finger millet (Eleusine coracana L.) sprouts, along with its underlying molecular mechanisms. The results demonstrated that treatment with 5 mM ZnSO₄ significantly increased the flavonoid content in sprouts, reaching a maximum value of 5.59 μg/sprout on the 6th day of germination. ZnSO₄ stress significantly enhanced the activities of PAL, 4CL, and C4H, while also considerably upregulating the expression levels of flavonoid-biosynthesis-related genes. Physiological indicators revealed that ZnSO₄ stress increased the contents of malondialdehyde, hydrogen peroxide, and superoxide anion in the sprouts, while inhibiting sprout growth. As a stress response, ZnSO₄ stress enhances the antioxidant system by increasing antioxidant capacity (ABTS, DPPH, and FRAP), antioxidant enzyme activity (POD and SOD), and related gene expression (POD, CAT, and APX) in sprouts. This study provides experimental evidence for ZnSO₄ stress to improve flavonoid accumulation and antioxidant capacity in finger millet sprouts and provides important theoretical and practical guidance for the development of high-quality functional foods. Full article

This study presents the synthesis, characterization, and application of magnetic magnetite–zirconium dioxide (Fe₃O₄–ZrO₂) nanoparticles as an efficient nanoadsorbent for fluoride removal from water. The nanoparticles were synthesized using a wet chemical co-precipitation method with Fe/Zr molar ratios of 1:1, 1:2, and 1:4, and characterized using Fourier-transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), and energy-dispersive X-ray spectroscopy (EDS). FTIR analysis confirmed the presence of Fe₃O₄ and ZrO₂ functional groups, while XRD showed that increased Zr content led to a dominant amorphous phase. SEM and EDS analyses revealed quasi-spherical and elongated morphologies with uniform elemental distribution, maintaining the designed Fe/Zr ratios. Preliminary adsorption tests identified the Fe/Zr = 1:1 (M1) nanoadsorbent as the most effective due to its high surface homogeneity and optimal fluoride-binding characteristics. Adsorption experiments demonstrated that the material achieved a maximum fluoride adsorption capacity of 70.4 mg/g at pH 3, with the adsorption process best fitting the Temkin isotherm model (R² = 0.987), suggesting strong adsorbate–adsorbent interactions. pH-dependent studies confirmed that adsorption efficiency decreased at higher pH values due to electrostatic repulsion and competition with hydroxyl ions. Competitive ion experiments revealed that common anions such as nitrate, chloride, and sulfate had negligible effects on fluoride adsorption, whereas bicarbonate, carbonate, and phosphate reduced removal efficiency due to their strong interactions with active adsorption sites. The Fe₃O₄–ZrO₂ nanoadsorbent exhibited excellent magnetic properties, facilitating rapid and efficient separation using an external magnetic field, making it a promising candidate for practical water treatment applications. Full article

The effects of octenyl succinic anhydride-modified hydrophobic starch (OSA starch) on the properties of myofibrillar protein (MP) emulsions were investigated. The results show that the stability of protein emulsions was significantly enhanced with the addition of OSA starch (0.25–1.0%), with the most pronounced effect observed at a 1% concentration. Concomitantly, increasing OSA starch concentrations led to a reduction in the fat globule size. Electrostatic interactions between anionic groups in the modified starch and myofibrillar proteins were observed, which effectively decreased the zeta potential of the emulsion to a minimum of −52.3 mV. However, in the composite emulsion system, a competitive relationship between OSA starch and myofibrillar proteins was evident, as reflected by the decrease in interfacial protein content from 1.16 mg/mL in the control (CK) group to 0.78 mg/mL in the OSA starch-treated group. Despite this competition, the overall emulsion stability was improved due to the synergistic effects of the modified starch and proteins. These findings suggest that OSA-modified starch holds promise as a stabilizer for enhancing the stability of myofibrillar protein emulsions. Full article

Finger millet (Eleusine coracana L.) is a nutrient-dense cereal with high flavonoid content, yet the mechanisms regulating its secondary metabolite biosynthesis remain underexplored. Various exogenous stimuli can readily activate the enzymatic pathways and gene expression associated with flavonoid biosynthesis in plants, which are regulated by developmental cues. Research has established that methyl jasmonate (MeJA) application enhances secondary metabolite production in plant systems. This investigation examined MeJA’s influence on flavonoid accumulation and physiological responses in finger millet sprouts to elucidate the molecular mechanisms underlying MeJA-mediated flavonoid accumulation. The findings revealed that MeJA treatment significantly suppressed sprout elongation while enhancing the biosynthesis of total flavonoids and phenolic compounds. MeJA treatment triggered oxidative stress responses, with hydrogen peroxide and superoxide anion concentrations increasing 1.84-fold and 1.70-fold compared to control levels at 4 days post-germination. Furthermore, the antioxidant defense mechanisms in finger millet were upregulated following treatment, resulting in significant enhancement of catalase and peroxidase enzymatic activities and corresponding transcript abundance. MeJA application augmented the activities of key phenylpropanoid pathway enzymes—phenylalanine ammonia-lyase (PAL) and cinnamate 4-hydroxylase (C4H)—and upregulated their respective gene expression. At 4 days post-germination, EcPAL and EcC4H transcript levels were elevated 3.67-fold and 2.61-fold, respectively, compared to untreated controls. MeJA treatment significantly induced the expression of downstream structural genes and transcriptional regulators. This study provides a deeper understanding of the mechanism of flavonoid accumulation in foxtail millet induced by MeJA, and lays a foundation for exogenous conditions to promote flavonoid biosynthesis in plants. Full article

The health-promoting activity of radish microgreens after consumption depends on their bioaccessibility and bioavailability. In this study, we compared the composition of phenolic compounds, their cytoprotective and anti-inflammatory activities in cell lines, and antioxidant properties of the undigested radish microgreens with their fractions obtained after simulated in vitro digestion in the stomach, as well as in the small and large intestine. The results have demonstrated higher levels of total phenolics (by 70.35%) and total hydroxycinnamic acids (3.5 times increase), an increase in scavenging efficiency toward ABTS^•+ and superoxide anion radicals, and an increase in the reduction potential (FRAP method) in the gastric bioaccessible fraction. In contrast, small intestinal digestion negatively affected phenolic content (a reduction of 53.30–75.63%), except for total hydroxycinnamic acids (3-fold increase). Incubation of the non-bioavailable fraction with bacterial enzymes led to further degradation. Undigested microgreens had no negative impact on Caco-2, HT-29, and SH-SY5Y cells’ metabolism at 0.05–2 mg/mL, while all digested samples at 1 mg/mL revealed their cytotoxic potential. All samples used at a non-cytotoxic concentration showed protective activity against H₂O₂ and corticosterone-induced oxidative stress generation as well as reduced proinflammatory cytokines production. Overall, radish microgreens may exhibit a broad spectrum of biological activities when consumed. Full article

Hot water extraction (HE), enzyme-assisted hot water extraction (EAHE), ultrasonic-assisted extraction with NADES (UAE-NADES) and ultrasonic-assisted extraction with NADES and enzyme pretreatment (UAE-NADES-E) were employed to extract polysaccharides from Peucedani Decursivi Radix (PDR) and their structures were characterized for the first time. UAE-NADES-E was found to be the most effective extraction method, and the extraction process was optimized by Box–Behnken design (BBD)-response surface methodology (RSM) experiments. The optimal extraction process was determined by using a NADES system with a molar ratio of betaine to 1,3-butanediol of 1:3, a water content of 30%, a liquid/solid ratio of 40:1 mL/g, an ultrasound time of 30 min, an ultrasound temperature of 45 °C and an alcohol precipitation time of 6 h; the polysaccharide extraction yield reached 19.93%. Further, the structures of polysaccharides from PDR extracted by the above four methods were characterized by FT-IR, SEM, gel and anion-exchange chromatography. Eight monosaccharides were detected in the PDR polysaccharides extracted by the four methods. The PDR polysaccharides extracted by the UAE-NADES-E method had lower molecular weights compared with those extracted by the other methods. Moreover, the PDR polysaccharides exhibited obvious antioxidant activity, as revealed by DPPH, ABTS+ and hydroxyl radical scavenging experiments, meaning they have the potential to be developed as natural antioxidants. Full article

The Zhurong rover of the Tianwen-1 mission has detected sulfates in its landing area. The analysis of these sulfates provides scientific evidence for exploring past hydration conditions and atmospheric evolution on Mars. As a non-contact technique with long-range detection capability, Laser-Induced Breakdown Spectroscopy (LIBS) is widely used for elemental identification on Mars. However, quantitative analysis of anionic elements using LIBS remains challenging due to the weak characteristic spectral lines of evaporite salt elements, such as sulfur, in LIBS spectra, which provide limited quantitative information. This study proposes a quantitative analysis method for sulfur in sulfate-containing Martian analogs by leveraging spectral line correlations, full-spectrum information, and prior knowledge, aiming to address the challenges of sulfur identification and quantification in Martian exploration. To enhance the accuracy of sulfur quantification, two analytical models for high and low sulfur concentrations were developed. Samples were classified using infrared spectroscopy based on sulfur content levels. Subsequently, multimodal deep learning models were developed for quantitative analysis by integrating LIBS and infrared spectra, based on varying concentrations. Compared to traditional unimodal models, the multimodal method simultaneously utilizes elemental chemical information from LIBS spectra and molecular structural and vibrational characteristics from infrared spectroscopy. Considering that sulfur exhibits distinct absorption bands in infrared spectra but demonstrates weak characteristic lines in LIBS spectra due to its low ionization energy, the combination of both spectral techniques enables the model to capture complementary sample features, thereby effectively improving prediction accuracy and robustness. To validate the advantages of the multimodal approach, comparative analyses were conducted against unimodal methods. Furthermore, to optimize model performance, different feature selection algorithms were evaluated. Ultimately, an XGBoost-based feature selection method incorporating prior knowledge was employed to identify optimal LIBS spectral features, and the selected feature subsets were utilized in multimodal modeling to enhance stability. Experimental results demonstrate that, compared to the BPNN, SVR, and Inception unimodal methods, the proposed multimodal approach achieves at least a 92.36% reduction in RMSE and a 46.3% improvement in R². Full article

Presently, extensive research has been conducted on the electrochemical behavior of titanium ions in molten salt, especially in relation to titanium fluoride coordination. However, there is limited research on the coordination between titanium and oxygen. Consequently, this research delved into the influence of oxygen ions on the electrochemical behavior and coordination properties of titanium ions through the utilization of both electrochemical and spectroscopy techniques. The study involved the use of cyclic voltammetry (CV), square wave voltammetry (SWV), and the open-circuit potential (OCP) method to explore the electrochemical properties of titanium ions at different titanium-oxygen ratios. Furthermore, X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy were applied to assess the presence of titanium ions in molten salt and the coordination structure of titanium ions and anions in molten salts, respectively. The results demonstrate that with an increase in oxygen ion content, chloride ions are gradually replaced by oxygen ions, forming TiO_xCl_y^m− complexes. Full article

Background: Under oxidative stress conditions, the increased levels of reactive oxygen species (ROS) within cells disrupt the intracellular homeostasis. Tartary buckwheat peptides exert their effects by scavenging oxidative free radicals, such as superoxide anion and hydrogen peroxide, thereby reducing oxidative damage within cells. Meanwhile, these peptides safeguard mitochondria by maintaining the mitochondrial membrane potential, decreasing the production of mitochondrial oxygen free radicals, and regulating mitochondrial biogenesis and autophagy to preserve mitochondrial homeostasis. Through these mechanisms, Tartary buckwheat peptides restore the intracellular redox balance, sustain cellular energy metabolism and biosynthesis, and ensure normal cellular physiological functions, which is of great significance for cell survival and adaptation under oxidative stress conditions. Objectives: In this experiment, a classical cellular oxidative stress model was established. Indicators related to antioxidant capacity and mitochondrial membrane potential changes, as well as pathways associated with oxidative stress, were selected for detection. The aim was to elucidate the effects of Tartary buckwheat oligopeptides on the metabolism of cells in response to oxidative stress. Methods: In this study, we established an oxidative damage model of mouse skeletal muscle myoblast (SOL8) cells using hydrogen peroxide (H₂O₂), investigated the pre-protective effects of Tartary buckwheat oligopeptides on H₂O₂-induced oxidative stress damage in SOL8 cells at the cellular level, and explored the possible mechanisms. The CCK-8 method is a colorimetric assay based on WST-8-[2-(2-methoxy-4-nitrophenyl)-3-(4-nitrophenyl)-5-(2,4-disulfophenyl)-2H-tetrazolium, monosodiumsalt], which is used to detect cell proliferation and cytotoxicity. Results: The value of CCK-8 showed that, when the cells were exposed to 0.01 mmol/L H₂O₂ for 1 h and 10 mg/mL Tartary buckwheat oligopeptides intervention for 48 h, these were the optimal conditions. Compared with the H₂O₂ group, the intervention group (KB/H₂O₂ group) showed that the production of ROS was significantly reduced (p < 0.001), the malondialdehyde (MDA) content was significantly decreased (p < 0.05), and the activity of catalase (CAT) was significantly increased (p < 0.01); the mitochondrial membrane potential in the KB/H₂O₂ group tended to return to the level of the control group, and they all showed dose-dependent effects. Compared with the H₂O₂ group, the mRNA expression of KEAP1 in the KB/H₂O₂ group decreased, while the mRNA expression of NRF2α, HO-1, nrf1, PGC-1, P62, and PINK increased. Conclusions: Therefore, Tartary buckwheat oligopeptides have a significant pre-protective effect on H₂O₂-induced SOL8 cells, possibly by enhancing the activity of superoxide dismutase, reducing ROS attack, balancing mitochondrial membrane potential, and maintaining intracellular homeostasis. Full article

This study proposes a method for separating asphalt and aggregates in recycled asphalt pavement (RAP) materials using surfactants as solvents. This method utilizes surfactants to soften the asphalt by reducing its surface tension, separating the RAP clusters, and washing away the asphalt from the RAP. The wastewater is recycled during the emulsification–separation process without discharge. Factors affecting the separation effect of RAP, including the type of anionic surfactants, the surfactant concentration, the emulsion-to-RAP ratio, temperature, the rotation rate and time, and the RAP’s particle size, were investigated in depth, and the separation effect and its influence on the aggregate properties were evaluated. The experimental results indicate that when using the optimal process to mix and treat 13.2 mm and 9.5 mm RAP clusters, it is possible to achieve 100% separation of the coarse RAP above 4.75 mm, with a 64.58% reduction in the asphalt content. The angularity of the aggregate remained unchanged after separation. It was observed from scanning electron microscopy (SEM) images that the asphalt on the surface of the coarse aggregate had been eluted, and the morphology of the aggregate surface was completely exposed. This environmentally friendly separation method provides new possibilities for high-content RAP recycling in pavement engineering. Full article

Rationally designing and synthesizing chemosensors capable of simultaneously detecting both anions and cations via water content modulation is challenging. In this study, we synthesized and characterized a novel triazine calixarene derivative-based iodide and copper ion-selective fluorescent “turn-off” sensor. This dual-channeled fluorescent probe is able to recognize Cu²⁺ and I⁻ ions simultaneously in aqueous systems. The fluorescent sensor s4 was synthesized by displacement reaction of acridine with 1, 3-bis (dichloro-mono-triazinoxy) benzene in acetonitrile. Mass spectrometry (MS), UV-vis, and fluorescence spectra were acquired to characterize the fluorescence response of s4 to different cations and anions, while infrared (IR) spectroscopy and isothermal titration calorimetry (ITC) were employed to study the underlying selectivity mechanism of s4 to Cu²⁺ and I⁻. In detail, s4 displayed extremely high sensitivity to Cu²⁺ with over 80% fluorescence decrement caused by the paramagnetic nature of Cu²⁺ in the aqueous media. The reversible fluorescence response to Cu²⁺ and the responses to Cu²⁺ in the solution of other potential interferent cations, such as Li⁺, Na⁺, K⁺, Ca²⁺, Cd²⁺, Zn²⁺, Sr²⁺, Ni²⁺, Co²⁺ were also investigated. Probe s4 also exhibited very good fluorescence selectivity to iodide ions under various anion (F⁻, Cl⁻, Br⁻, NO₃⁻, HSO₄⁻, ClO₄⁻, PF₆⁻, AcO⁻, H₂PO₄⁻) interferences. In addition to the fluorescent response to I⁻, s4 showed a highly selective naked-eye-detectable color change from colorless to yellow with the other tested anions. Full article

Background: Baicalin (BG) has been used in the treatment of many diseases. However, the effect of hepatic insufficiency on its pharmacokinetics has not been reported, and there is a lack of clinical guidance for the use of BG in patients with hepatic impairment. Methods: Carbon tetrachloride (CCl₄)-induced rat models were used to simulate hepatic failure patients to assess the effect of hepatic impairment on the pharmacokinetics and distribution of BG. In vitro metabolism and transporter studies were employed to elucidate the potential mechanisms. Results: After intragastric administration of 10 mg/kg of BG, the peak plasma concentration and exposure (AUC_0–t) of BG decreased by 64.6% and 52.6%, respectively, in CCl₄-induced rats. After intravenous administration, the AUC_0–t decreased by 73.6%, and unlike in the control group, the second absorption peak of BG was not obvious in the concentration–time curve of CCl₄-induced rats. The cumulative excretion of BG in the feces increased, but that in the bile decreased. In vivo data indicated that the absorption and enterohepatic circulation of BG were affected. In vitro studies found that the hydrolysis of BG to the aglycone baicalein decreased significantly in the intestinal tissues and contents of the CCl₄-induced rats. And BG was identified as a substrate for multiple efflux and uptake transporters, such as breast cancer resistance protein (BCRP) and multidrug resistance-associated proteins (MRPs), organic anion transporting polypeptides (OATP1B1, 1B3, 2B1), and organic anion transporters (OATs). The bile acids accumulated by liver injury inhibited the uptake of BG by OATPs, especially that by OATP2B1. Conclusions: Hepatic impairment reduced BG hydrolysis by intestinal microflora and inhibited its transporter-mediated biliary excretion, which synergistically led to the attenuation of the enterohepatic circulation of BG, which altered its pharmacokinetics. Full article

Streptomyces spp. are considered a prolific resource of bioactive and structurally diverse secondary metabolites for natural product drug discovery. In this study, 20 out of 56 actinomycetes from soils showed antibacterial activity against at least one tested bacterium. Among them, the CH6 isolate could be a potential source of antibacterial compounds, as indicated by inhibition zone diameters (11.1–32.0 mm) and MIC values (from 8 to 128 µg/mL) against microbial pathogens. The extract showed moderate antioxidant activity against DPPH, hydroxyl, and superoxide anion radicals. Notably, CH6 extract displayed strong inhibitory effects on cancer cells, including MCF-7, A549, HepG2, and HT29, with IC₅₀ values ranging from 18.0 to 73.4 µg/mL, without cytotoxic activity against non-cancerous HEK-293 cells. The genome of CH6 consists of a 6,936,977 bp linear chromosome with a 73.0% GC content, 5831 protein-coding genes, and 13 biosynthetic gene clusters (BGCs). The highest dDDH and ANI values between CH6 and the most closely related type strain, Streptomyces evansiae DSM 41979^T, were 45.8% and 92.6%, respectively, which suggests that CH6 is a novel species. Interestingly, cluster 2, with a size of 133,857 bp, comprised both guangnanmycin and scabichelin clusters, which have been reported for the first time. These findings showed that Streptomyces sp. CH6 could be a novel species and a producer of guangnanmycin and even new secondary metabolites, particularly those with antibacterial and anticancer activities. Full article

The paper is devoted to the plasticization mechanisms of alkali-activated cement system Na₂O-CaO-Al₂O₃-SiO₂-H₂O. The fundamentals and basic factors determining the effectiveness of plasticizing surfactants for alkali-activated cement materials are discussed. The factors under consideration in the study were alkali-activated cement basicity (the content of granulated blast furnace slag), the anion of the alkaline component or activator, and the degree of dispersing of the cement particles in the system. The action effect of plasticizers was determined by finding the interrelation between the stability of its molecular structure, degree of adsorption, and molecular weight depending on mentioned basic factors. A systematic approach to the systematization of surfactants and their choice to be taken into consideration to control technology-related and physico-mechanical properties of alkali-activated cement-based heavyweight concretes, building mortars, and lightened grouts has been proposed. Full article