Search Results (29)

Background: Plasticizers, including phthalate esters and phthalate-free alternatives, are widely detected environmental chemicals. Although increasing evidence suggests that plasticizers may disrupt gastrointestinal homeostasis, their potential molecular links with inflammatory gastrointestinal disorders (IGDs) remain unclear. Methods: This study aimed to systematically identify potential molecular targets and pathways linking representative plasticizers with IGDs. An integrative network toxicology framework was applied to investigate four plasticizers, including dimethyl phthalate (DMP), diethyl phthalate (DEP), dioctyl phthalate/di(2-ethylhexyl) phthalate (DOP/DEHP), and acetyl tributyl citrate (ATBC), in relation to Crohn’s disease (CD), ulcerative colitis (UC), esophagitis, and gastritis. Plasticizer- and disease-related targets were collected from public databases, followed by overlapping target screening, protein–protein interaction network analysis, functional enrichment analysis, GEO-based transcriptomic validation, molecular docking, molecular dynamics simulation, and single-cell RNA-seq analysis. Results: Disease-specific candidate targets were identified, including CXCL8 and FN1 for CD, IL1B for UC, MAPK3, FASN, FN1, PPARG, CXCL8, FOS, and HIF1A for esophagitis, and MMP9, TNF, TLR4, IL6, CCR2, IFNG, and PTGS2 for gastritis. Cross-disease analysis further identified plasticizer-associated signature targets, including MMP7 for DMP, HMOX1 and NOS2 for DEP, and LTF and CCL11 for ATBC. Enrichment analysis indicated that these targets were mainly involved in inflammatory, chemokine, MAPK-related, and xenobiotic response pathways. Molecular docking and dynamics simulations suggested stable interactions between selected plasticizers and candidate targets, while single-cell analysis revealed their cell-type-specific expression patterns in epithelial, immune, and stromal compartments. Conclusions: This study provides an exploratory network toxicology framework for identifying potential molecular associations between plasticizer exposure and IGDs. The findings highlight disease-specific and plasticizer-associated candidate targets that may guide future experimental validation and environmental risk assessment. Full article

Infertility is a prevalent clinical issue which disrupts normal human life and exerts an impact on fertility rates within the population. The increase in environmental pollutants, including acetyl tributyl citrate (ATBC), has given rise to concerns regarding their potential toxicity in infertility-related disorders. Icariin exhibits therapeutic effects on infertility, yet its mechanism of action against plasticiser-induced reproductive disorders remains unclear. This study aims to elucidate the potential toxicological targets and molecular mechanisms of ATBC-induced infertility, as well as the therapeutic targets and mechanisms of icariin in treating ATBC-induced reproductive disorders, through network toxicology, molecular-docking techniques and molecular dynamics simulation. Utilising the component-target database SwissTargetPrediction, the Similarity Ensemble Approach, PharmMapper, the ChEMBL database, and disease databases including the Therapeutic Target Database, OMIM, GeneCards, and DrugBank, 63 targets for ATBC-induced infertility and 33 targets for icariin treatment were identified. Screening via the STRING platform and Cytoscape 3.10.1 software yielded four core targets for ATBC-induced infertility—HSP90AA1, PIK3CA, CASP3, HRAS—and four core targets for icariin treatment—IL6, TNF, STAT3, and INS. Gene ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway analyses revealed that ATBC-induced infertility correlates with pathways including pathways in cancer, prostate cancer, and PI3K-Akt signalling pathways. Conversely, the core targets of icariin therapy for related reproductive disorders are closely associated with tumour-associated signalling pathways and the AGE-RAGE signalling pathway. Molecular-docking and molecular dynamics simulation further confirmed the strong binding interactions between ATBC and infertility-related targets, as well as between icariin and core targets for treating reproductive disorders. This provides a theoretical foundation for understanding ATBC’s toxicological targets and the complex molecular mechanisms underpinning icariin’s treatment of infertility. It informs the development of strategies for icariin to prevent and treat infertility caused by exposure to ATBC-containing plastics or excessive ATBC contact. Full article

Gestational exposure to environmental chemicals has long been considered an important contributor to adverse pregnancy outcomes. While humans are exposed to a large complexity of environmental chemicals under real scenarios, existing studies have generally focused on a limited number of substances when exploring the health impacts of environmental exposure. Our work employed the recently developed ExpoNano strategy to characterize exposure to 283 environmental chemicals via urine in pregnant women from three Chinese cities and explored the association between environmental exposure and the risk of gestational diabetes mellitus (GDM) through a nested case–control study within a prospective birth cohort. The results revealed ubiquitous gestational exposure (detection frequency > 70%) to 37 chemicals, including selected mono-phthalate esters (mono-PAEs), non-PAE plasticizers, synthetic antioxidants, organophosphate esters, personal care products, UV stabilizers, photoinitiators, pesticides, and hydroxy polyaromatic hydrocarbons across the three cities. The cumulative concentrations of detectable chemicals displayed median values of 461–741 ng/mL in different populations of pregnant women, which exhibited significant variations across regions. In the GDM case–control study (85 GDM cases and 170 healthy controls), although mixed exposure was not associated with the risk of GDM, exposure to acetyl tributyl citrate, an emerging plasticizer, was found to be significantly associated with GDM risk, based on both the single-pollutant and mixed exposure models. However, it should be noted that due to the relatively small sample size, the findings should be interpreted as preliminary exploratory results requiring further validation in larger cohorts. This study demonstrates the complexity of environmental chemical exposure during pregnancy, indicating a critical need for further investigations of the potential impact on pregnancy outcomes. Full article

This study examines the effects of mastication time and the addition of a plasticizer (acetyl tributyl citrate (ATBC)) on the properties of non-vulcanized polylactic acid/natural rubber (PLA/NR) blends using a factorial design, along with the impact of changing the weight ratio of the blends. The results reveal the formation of plasticized PLA (P-PLA)-based thermoplastics with enhanced ductility. ATBC functions as both a PLA plasticizer and a compatibilizer in the binary PLA/NR system. However, improving compatibility requires the exclusive use of masticated NR with an appropriate mastication time (60 min) before blending. Optimal properties are achieved at a P-PLA/NR weight ratio of 90/10, maximizing the impact strength (~35.40 J/m) and toughness (~7.21 × 10⁶ MJ/m³). However, higher NR contents lead to reduced mechanical performance due to poor interfacial bonding. Thermal analysis reveals superior miscibility and dispersion in blends with a lower NR content (10 wt%), while the addition of plasticizers and NR leads to a decrease in the glass transition temperature (T_g) of the blends. The results suggest potential applications for developing biodegradable products with enhanced flexibility and improved low-temperature performance. The incorporation of ATBC can enhance material properties without relying on conventional synthetic compatibilizers. Full article

This study investigated a blend of poly (lactic acid) (PLA) and Saqqez gum, with a weight ratio of 70:30, respectively, along with two plasticizers, acetyl tributyl citrate (ATBC) and polyethylene glycol (PEG), at three different concentrations (14%, 16% and 18% by weight of the PLA). The blend was analyzed using differential scanning calorimetry (DSC), scanning electron microscopy (SEM), tensile tests, water-absorption behavior (coefficients of water absorption, sorption, diffusion and permeability of the samples during 240 h) and chemical resistance (exposure to 1 mol/L HCl and 1 mol/L NaOH for 240 h). The desired elastomer blend was then used to prepare natural chewing gum, which was subsequently subjected to texture profile analyzer (TPA) tests and sensory evaluation. The results showed that the addition of both plasticizers increased the tensile properties of the blend. Compared to neat PLA, all the blends exhibited an increase in elongation at break and a decrease in yield strength, with the maximum elongation at break (130.6%) and the minimum yield strength (12.2 MPa) observed in the blend containing 16% ATBC. Additionally, all the thermal attributes studied, including T_g, T_c and T_m, were lower than those of neat PLA, and the T_g values deviated from the values predicted via Fox’s equation. SEM images of the blends confirmed that plasticization improved the homogeneity and distribution of the components in the blend structure. PEG 18% and ATBC 16% exhibit the highest and lowest water-absorption behavior, respectively. Regarding chemical resistance, all blends showed weight gain when exposed to HCl, while no weight loss was observed for resistance to NaOH. The chewing gum sample obtained similar values for the mentioned tests compared to the commercial control sample. Overall, the results indicate that plasticization enhances the structure and performance of the PLA/Saqqez gum blend and further investigation is warranted. Full article

Transparent and flexible vibrotactile actuators play an essential role in human–machine interaction applications by providing mechanical stimulations that can effectively convey haptic sensations. In the present study, we fabricated an electroactive, flexible, and transparent vibrotactile actuator with a dielectric layer including a dielectric elastomer and dielectric fluid mixture. The dielectric fluid mixture of propylene carbonate (PC) and acetyl tributyl citrate (ATBC) was injected to obtain a transparent dielectric layer. To further improve the haptic performance, different weight ratios of dielectric fluid (PC: ATBC) were injected. The fabricated vibrotactile actuators based on a transparent dielectric layer were investigated for their electrical and electromechanical behavior. The proposed actuators generate a large vibrational intensity (~2.5 g) in the range of 200–250 Hz. Hence, the proposed actuators open up a new class of vibrotactile actuators for possible use in various domains, including robotics, smart textiles, teleoperation, and the metaverse. Full article

Acetyl tributyl citrate (ATBC) is a widely used phthalate substitute. Although ATBC is considered to be with a safe dosage of up to 1000 mg/kg/day, studies on its effects in some sensitive populations, such as diabetic patients, are relatively rare. Epidemiological studies have shown that there is a link between diabetes and nervous system diseases. However, toxicological studies have not fully confirmed this yet. In this study, glycolipid metabolism, cognitive deficits, brain tissue damage, levels of neurotransmitters, beta-amyloid plaques (Aβ), hyperphosphorylated tau protein (p-Tau), oxidative stress and inflammation, as well as glial cell homeostatic levels in the brain tissue of type 2 diabetes (T2DM) mice, were determined after ATBC exposure (0, 2, 20, and 200 mg/kg/day) for 90 days. The results confirmed that ATBC exposure aggravated the disorder of glycolipid metabolism and caused cognitive deficits in T2DM mice; induced histopathological alterations and Aβ and p-Tau accumulation, and reduced the levels of 5-hydroxytryptamine and acetylcholine in T2DM mouse brains; oxidative stress and glial cell homeostatic levels in T2DM mouse brains were also changed. Some of the adverse effects were gender-dependent. These findings support the theory that T2DM mice, especially males, are more sensitive to ATBC exposure. Although the safe dose of ATBC is high, prolonged exposure at seemingly safe concentrations has the potential to aggravate diabetes symptoms and cause brain tissue damage in T2DM mice. Full article

One of the blends that is usable for 3D printing while not being toxic to cell cultures is the lactic acid (PLA)/polyhydroxybutyrate (PHB)/thermoplastic starch (TPS) blend. The addition of plasticizers can change the rate of biodegradation and the biological behavior of the material. In order to evaluate the potential of the PLA/PHB/TPS material in combination with additives (plasticizers: acetyl tributyl citrate (ATBC) and oligomeric lactic acid (OLA)), for use in the field of biomedical tissue engineering, we performed a comprehensive in vitro characterization of selected mixture materials. Three types of materials were tested: I: PLA/PHB/TPS + 25% OLA, II: PLA/PHB/TPS + 30% ATBC, and III: PLA/PHB/TPS + 30% OLA. The assessment of the biocompatibility of the materials included cytotoxicity tests, such as monitoring the viability, proliferation and morphology of cells and their deposition on the surface of the materials. The cell line 7F2 osteoblasts (Mus musculus) was used in the experiments. Based on the test results, the significant influence of plasticizers on the material was confirmed, with their specific proportions in the mixtures. PLA/PHB/TPS + 25% OLA was evaluated as the optimal material for biocompatibility with 7F2 osteoblasts. The tested biomaterials have the potential for further investigation with a possible change in the proportion of plasticizers, which can have a fundamental impact on their biological properties. Full article

A high-performance polypropylene hollow fiber membrane (PP-HFM) was prepared by using a binary environmentally friendly solvent of polypropylene as the raw material, adopting the thermally induced phase separation (TIPS) method, and adjusting the raw material ratio. The binary diluents were soybean oil (SO) and acetyl tributyl citrate (ATBC). The suitable SO/ATBC ratio of 7/3 was based on the size change of the L-L phase separation region in PP-SO/ATBC thermodynamic phase diagram. Through the characterization and comparison of the basic performance of PP-HFMs, it was found that with the increase of the diluent content in the raw materials, the micropores of outer surface of the PP-HFM became larger, and the cross section showed a sponge-like pore structure. The fluoropolymer, Hyflon ADx, was deposited on the outer surface of the hollow fiber membrane using a physical modification method of solution dipping. After modification, the surface pore size of the Hyflon AD40L modified membranes decreased; the contact angle increased to around 107°; the surface energy decreased to 17 mN·m⁻¹; and the surface roughness decreased to 17 nm. Hyflon AD40L/PP-HFMs also had more water resistance properties from the variation of wetting curve. For biocompatibility of the membrane, the adsorption capacity of the modified PP membrane for albumin decreased from approximately 1.2 mg·cm⁻² to 1.0 mg·cm⁻², and the adsorption of platelets decreased under fluorescence microscopy. The decrease in blood cells and protein adsorption in the blood prolonged the clotting time. In addition, the hemolysis rate of modified PP membrane was reduced to within the standard of 5%, and the cell survival rate of its precipitate was above 100%, which also indicated the excellent biocompatibility of fluoropolymer modified membrane. The improvement of hydrophobicity and blood compatibility makes Hyflon AD/PP-HFMs have the potential for application in membrane oxygenators. Full article

In this study, yerba mate waste (YMW) was used to produce a kombucha beverage, and the obtained microbial cellulose produced as a byproduct (KMW) was used to reinforce a mechanically recycled poly(lactic acid) (r-PLA) matrix. Microbial cellulosic particles were also produced in pristine yerba mate for comparison (KMN). To simulate the revalorization of the industrial PLA products rejected during the production line, PLA was subjected to three extrusion cycles, and the resultant pellets (r3-PLA) were then plasticized with 15 wt.% of acetyl tributyl citrate ester (ATBC) to obtain optically transparent and flexible films by the solvent casting method. The plasticized r3-PLA-ATBC matrix was then loaded with KMW and KMN in 1 and 3 wt.%. The use of plasticizer allowed a good dispersion of microbial cellulose particles into the r3-PLA matrix, allowing us to obtain flexible and transparent films which showed good structural and mechanical performance. Additionally, the obtained films showed antioxidant properties, as was proven by release analyses conducted in direct contact with a fatty food simulant. The results suggest the potential interest of these recycled and biobased materials, which are obtained from the revalorization of food waste, for their industrial application in food packaging and agricultural films. Full article

The overall performance of plasticizers on common mechanical and physical properties, as well as on the processability of polylactic acid (PLA) films, is well-explored. However, the influence of plasticizers on biodegradation is still in its infancy. In this study, the influence of natural-based dicarboxylic acid-based ester plasticizers (MC2178 and MC2192), acetyl tributyl citrate (ATBC Citroflex A4), and polyethylene glycol (PEG 400) on the biodegradation of extruded PLA films was evaluated. Furthermore, the influence of accelerated ageing on the performance properties and biodegradation of films was further investigated. The biodegradation of films was determined under controlled thermophilic composting conditions (ISO 14855-1). Apart from respirometry, an evaluation of the degree of disintegration, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FT-IR), and scanning electron microscopy (SEM) of film surfaces was conducted. The influence of melt-processing with plasticizers has a significant effect on structural changes. Especially, the degree of crystallinity has been found to be a major factor which affects the biodegradation rate. The lowest biodegradation rates have been evaluated for films plasticized with PEG 400. These lower molecular weight plasticizers enhanced the crystallinity degrees of the PLA phase due to an increase in chain mobility. On the contrary, the highest biodegradation rate was found for films plasticized with MC2192, which has a higher molecular weight and evoked minimal structural changes of the PLA. From the evaluated results, it could also be stated that migration of plasticizers, physical ageing, and chain scission of films prompted by ageing significantly influenced both the mechanical and thermal properties, as well as the biodegradation rate. Therefore, the ageing of parts has to be taken into consideration for the proper evolution of the biodegradation of plasticized PLA and their applications. Full article

In the context of today’s needs for environmental sustainability, it is important to develop new materials that are based on renewable resources and biodegrade at the end of their life. Bioplastics reinforced by agricultural waste have the potential to cause a revolution in many industrial applications. This paper reports the physical properties and crystallization kinetics of biocomposite films based on poly(L-lactic acid) (PLLA) and 10 wt.% of spent coffee grounds (SCG). To enhance adhesion between the PLLA matrix and SCG particles, a compatibilizing agent based on itaconic anhydride (IA)-grafted PLLA (PLLA-g-IA) was prepared by reactive extrusion using dicumyl peroxide (DCP). Furthermore, due to the intended application of the film in the packaging industry, the organic plasticizer acetyl tributyl citrate (ATBC) is used to improve processing and increase ductility. The crystallization behavior and thermal properties were observed by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Crystallinity degree increased from 3,5 (neat PLLA) up to 48% (PLLA/PLLA-g-IA/ATBC/SCG) at the highest cooling rate. The physical properties were evaluated by tensile testing and dynamic mechanical analysis (DMA). The combination of the compatibilizer, SCG, and ATBC led to a synergistic effect that positively influenced the supramolecular structure, internal damping, and overall ductility of the composite films. Full article

The biodegradation of polyhydroxybutyrate-co-hydroxyvalerate (PHBV) ternary biocomposites containing nature-based plasticizer acetyl tributyl citrate (ATBC), heterogeneous nucleation agents—calcium carbonate (CaCO₃) and spray-dried lignin-coated cellulose nanocrystals (L-CNC)—in vermicomposting, freshwater biotope, and thermophilic composting have been studied. The degree of disintegration, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and the evaluation of surface images taken by scanning electron microscopy (SEM) were conducted for the determination influence of different environments and additives on the biodegradation of PHBV. Furthermore, the method adapted from ISO 14855-1 standard was used for thermophilic composting. It is a method based on the measurement of the amount of carbon dioxide evolved during microbial degradation. The highest biodegradation rate was observed in the thermophilic condition of composting. The biodegradation level of all PHBV-based samples was, after 90 days, higher than 90%. Different mechanisms of degradation and consequently different degradation rate were evaluated in vermicomposting and freshwater biotope. The surface enzymatic degradation, observed during the vermicomposting process, showed slightly higher biodegradation potential than the hydrolytic attack of freshwater biotope. The application of ATBC plasticizers in the PHBV matrix caused an increase in biodegradation rate in all environments. However, the highest biodegradation rate was achieved for ternary PHBV biocomposites containing 10 wt. % of ATBC and 10 wt. % of CaCO₃. A considerable increase in the degree of disintegration was evaluated, even in freshwater biotope. Furthermore, the slight inhibition effect of L-CNC on the biodegradation process of ternary PHBV/ATBC/L-CNC could be stated. Full article

The potential use of paper sludge (PS) as filler in the production of bio-composites based on poly lactic acid (PLA) and polybutylene adipate terephthalate (PBAT) was investigated. PS/PLA/PBAT composites, with addition of acetyl tributyl citrate (ATBC) as biobased plasticizer, were produced with PS loadings up to 30 wt.% by twin-screw extrusion followed by injection moulding. The composites were characterized by rheological measurements, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and mechanical tests (tensile and impact resistance) to study the effect of PS on the processability, thermal stability, crystallinity and mechanical performance of polymeric matrix. The optimized composites at higher PS content were successfully processed to produce pots for horticulture and, in view of this application, preliminary phytotoxicity tests were conducted using the germination test on Lepidium sativum L. seeds. Results revealed that developed composites up to 30 wt.% PS had good processability by extrusion and injection moulding showing that PS is a potential substitute of calcium carbonate as filler in the production of bio-composites, and the absence of phytotoxic effects showed the possibility of their use in the production of pots/items for applications in floriculture and/or horticulture. Full article

The influence of additives such as natural-based plasticiser acetyl tributyl citrate (ATBC), CaCO₃ and lignin-coated cellulose nanocrystals (L-CNC) on the biodegradation of polylactic acid (PLA) biocomposites was studied by monitoring microbial metabolic activity through respirometry. Ternary biocomposites and control samples were processed by a twin-screw extruder equipped with a flat film die. Commonly available compost was used for the determination of the ultimate aerobic biodegradability of PLA biocomposites under controlled composting conditions (ISO 14855-1). In addition, the hydro-degradability of prepared films in a freshwater biotope was analysed. To determine the efficiency of hydro-degradation, qualitative analyses (SEM, DSC, TGA and FTIR) were conducted. The results showed obvious differences in the degradation rate of PLA biocomposites. The application of ATBC at 10 wt.% loading increased the biodegradation rate of PLA. The addition of 10 wt.% of CaCO₃ into the plasticised PLA matrix ensured an even higher degradation rate at aerobic thermophilic composting conditions. In such samples (PLA/ATBC/CaCO₃), 94% biodegradation in 60 days was observed. In contrast, neat PLA exposed to the same conditions achieved only 16% biodegradation. Slightly inhibited microorganism activity was also observed for ternary PLA biocomposites containing L-CNC (1 wt.% loading). The results of qualitative analyses of degradation in a freshwater biotope confirmed increased biodegradation potential of ternary biocomposites containing both CaCO₃ and ATBC. Significant differences in the chemical and structural compositions of PLA biocomposites were found in the evaluated period of three months. Full article