Search Results (250)

Waste from zinc−carbon batteries poses a serious environmental protection problem. One of the main problems is also the reliable and rapid determination of some compounds that may be present in food and beverages consumed worldwide. This study addresses these problems and presents a possible solution for the electrochemical detection of xanthine using carbon from spent batteries. Cyclic voltammetry and differential pulse voltammetry are electrochemical methods used for the detection of xanthine. The techniques used demonstrate the mechanism of xanthine oxidation in the tested environment. A linear correlation was found between the oxidation current peaks and the xanthine concentration in the range of 5·10⁻⁷ to 1·10⁻⁴ M, as well as the values for the limit of detection and the limit of quantification, 7.86·10⁻⁸ M and 2.62·10⁻⁷ M, respectively. The interference test shows that the electrode obtained from waste Zn-C batteries has good selectivity, which means that the electrode can be used for xanthine determination in the presence of various ions. The data obtained show that carbon sensors from used zinc−carbon batteries can be used to detect xanthine in real samples. Full article

This study investigates the performance of Cu-intercalated V₃O₇·H₂O (CuVOH) as a cathode material for aqueous zinc-ion batteries (AZIBs). Density Functional Theory (DFT) calculations were conducted to explore the effects of Cu²⁺ incorporation and structural water on the electrochemical performance of VOH. The results indicated that Cu²⁺ and structural water enhance Zn²⁺ diffusion by reducing electrostatic resistance and facilitating faster transport. Based on these insights, CuVOH nanobelts were synthesized via a one-step hydrothermal method. The experimental results confirmed the DFT predictions, demonstrating that CuVOH exhibited an initial discharge capacity of 336.1 mAh g⁻¹ at 0.2 A g⁻¹ and maintained a high cycling stability with 98.7% retention after 1000 cycles at 10 A g⁻¹. The incorporation of Cu²⁺ pillars and interlayer water improved the structural stability and Zn²⁺ diffusion, offering enhanced rate performance and long-term cycling stability. The study highlights the effective integration of computational and experimental methods to optimize cathode materials for high-performance AZIBs, providing a promising strategy for the development of stable and efficient energy storage systems. Full article

Rechargeable aqueous zinc-ion batteries (AZIBs) have garnered significant research attention in the energy storage field owing to their inherent safety, cost-effectiveness, and environmental sustainability. Nevertheless, critical challenges associated with zinc anodes—including dendrite formation, hydrogen evolution corrosion, and mechanical degradation—substantially impede their practical implementation. Grain boundary engineering (GBE) emerges as an innovative solution for zinc anode optimization through the precise regulation of grain boundary density, crystallographic orientation, and chemical states in metallic materials. This study comprehensively investigates the fundamental mechanisms and application prospects of GBE in zinc-based anodes, providing pivotal theoretical insights and technical methodologies for designing highly stable electrode architectures. The findings are expected to promote the development of aqueous zinc batteries toward a high energy density and long cycle life. Full article

This study explores the development of aluminum-doped MgV₂O₄ spinel cathodes for aqueous zinc-ion batteries (AZIBs), addressing the challenges of poor Zn²⁺ ion diffusion and structural instability. Al³⁺ ions were pre-inserted into the spinel structure using a sol-gel method, which enhanced the material’s structural stability and electrical conductivity. The doping of Al³⁺ mitigates the electrostatic interactions between Zn²⁺ ions and the cathode, thereby improving ion diffusion and facilitating efficient charge/discharge processes. While pseudocapacitive behavior plays a dominant role in fast charge storage, the diffusion of Zn²⁺ within the bulk material remains crucial for long-term performance and stability. Our findings demonstrate that Al-MgV₂O₄ exhibits enhanced Zn²⁺ diffusion kinetics and robust structural integrity under high-rate cycling conditions, contributing to its high electrochemical performance. The Al-MgVO cathode retains a capacity of 254.3 mAh g⁻¹ at a high current density of 10 A g⁻¹ after 1000 cycles (93.6% retention), and 186.8 mAh g⁻¹ at 20 A g⁻¹ after 2000 cycles (90.2% retention). These improvements, driven by enhanced bulk diffusion and the stabilization of the crystal framework through Al³⁺ doping, make it a promising candidate for high-rate energy storage applications. Full article

Layered transition metal dichalcogenides (TMDs) have gained considerable attention as promising cathodes for aqueous zinc-ion batteries (AZIBs) because of their tunable interlayer architecture and rich active sites for Zn²⁺ storage. However, unmodified TMDs face significant challenges, including limited redox activity, sluggish kinetics, and insufficient structural stability during cycling. These limitations are primarily attributed to their narrow interlayer spacing, strong electrostatic interactions, the large ionic hydration radius, and their high binding energy of Zn²⁺ ions. To address these restrictions, an in situ organic polyaniline (PANI) intercalation strategy is proposed to construct molybdenum disulfide (MoS₂)-based cathodes with extended layer spacing, thereby improving the zinc storage capabilities. The intercalation of PANI effectively enhances interplanar spacing of MoS₂ from 0.63 nm to 0.98 nm, significantly facilitating rapid Zn²⁺ diffusion. Additionally, the π-conjugated electron structure introduced by PANI effectively shields the electrostatic interaction between Zn²⁺ ions and the MoS₂ host, thereby promoting Zn²⁺ diffusion kinetics. Furthermore, PANI also serves as a structural stabilizer, maintaining the integrity of the MoS₂ layers during Zn-ion insertion/extraction processes. Furthermore, the conductive conjugated PANI boosts the ionic and electronic conductivity of the electrodes. As expected, the PANI–MoS₂ electrodes exhibit exceptional electrochemical performance, delivering a high specific capacity of 150.1 mA h g⁻¹ at 0.1 A g⁻¹ and retaining 113.3 mA h g⁻¹ at 1 A g⁻¹, with high capacity retention of 81.2% after 500 cycles. Ex situ characterization techniques confirm the efficient and reversible intercalation/deintercalation of Zn²⁺ ions within the PANI–MoS₂ layers. This work supplies a rational interlayer engineering strategy to optimize the electrochemical performance of MoS₂-based electrodes. By addressing the structural and kinetic limitations of TMDs, this approach offers new insights into the development of high-performance AZIBs for energy storage applications. Full article

Aqueous zinc-ion batteries (AZIBs) have emerged as promising candidates for large-scale energy storage due to their inherent safety, low cost, and environmental sustainability. However, in practical applications, AZIBs are constrained by the adverse reactions originating from the zinc anodes, including dendrite formation, hydrogen evolution reaction, corrosion, and passivation, which hinder their large-scale commercialization. Nowadays, alloying strategies have been recognized as efficient approaches to address these limitations and have gained significant attention. By introducing heterogeneous elements into Zn matrices, alloying strategies can suppress dendrite formation and side reactions, modulate the interfacial kinetic process, and enhance electrochemical stability. This review systematically discusses the advantages of alloying for Zn anodes, categorizes key design strategies, such as surface modifications, composite structures, functional alloying, gradient, and layered alloy designs, and meanwhile highlights their performance improvements. Furthermore, we suggest future directions for advanced alloy development, scalable fabrication design, and integrated system optimization. Alloy engineering represents a critical pathway toward high-performance, durable Zn anodes for next-generation AZIBs and other metal-ion batteries. Full article

Aqueous zinc ion batteries (AZIBs) have considerable potential for energy storage owing to their cost-effectiveness, safety, and environmental sustainability. However, dendrite formation, hydrogen evolution reaction (HER), and corrosion of the bare zinc (B-Zn) anode tremendously impact the performance degradation and premature failure of AZIBs. This study introduces a glancing angle deposition (GLAD) approach during the sputtering process to fabricate tellurium nanostructured (TeNS) at the zinc (Zn) anode to avoid the aforementioned issues with the B-Zn anode. Three different deposition times (5, 10, and 30 min) were used to prepare TeNS at the Zn anode. The morphology, crystallinity, composition, and wettability of the TeNSs were analyzed. The TeNSs served as hydrophilic sites and a protective layer, facilitating uniform Zn nucleation and plating while inhibiting dendrite formation and side reactions. Consequently, the symmetric cell with TeNS deposited on the Zn anode for 10 min (Te@Zn_10 min) demonstrated an enhanced cycling stability of 350 h, the lowest nucleation overpotential of 10.65 mV at a current density of 1 mA/cm², and an areal capacity of 0.5 mAh/cm². The observed enhancement in the cycling stability and reduction in the nucleation overpotential can be attributed to the optimal open area fraction of the TeNSs on the Zn surface, which promotes uniform Zn deposition while effectively suppressing side reactions. Full article

Next-generation recycling technologies must be urgently innovated to tackle huge volumes of spent batteries, photovoltaic panels or printed circuit boards (WPCBs). Current e-waste recycling industrial technology is dominated by traditional recycling technologies. Herein, ionic liquids (ILs), deep eutectic solvents (DESs) and promising oxidizing additives that can overcome some traditional recycling methods of metal ions from e-waste, used in our works from last year, are presented. The unique chemical environments of ILs and DESs, with the application of low-temperature extraction procedures, are important environmental aspects known as “Green Methods”. A closed-loop system for recycling zinc and manganese from the “black mass” (BM) of waste, Zn-MnO₂ batteries, is presented. The leaching process achieves a high efficiency and distribution ratio using the composition of two solvents (Cyanex 272 + diethyl phosphite (DPh)) for Zn(II) extraction. High extraction efficiency with 100% zinc and manganese recovery is also achieved using DESs (cholinum chloride/lactic acid, 1:2, DES 1, and cholinum chloride/malonic acid, 1:1, DES 2). New, greener recycling approaches to metal extraction from the BM of spent Li-ion batteries are presented with ILs ([N_8,8,8,1][Cl], (Aliquat 336), [P_6,6,6,14][Cl], [P_6,6,6,14][SCN] and [Benzet][TCM]) eight DESs, Cyanex 272 and D2EHPA. A high extraction efficiency of Li(I) (41–92 wt%) and Ni(II) (37–52 wt%) using (Cyanex 272 + DPh) is obtained. The recovery of Ni(II) and Cd(II) from the BM of spent Ni-Cd batteries is also demonstrated. The extraction efficiency of DES 1 and DES 2, contrary to ILs ([P_6,6,6,14][Cl] and [P_6,6,6,14][SCN]), is at the level of 30 wt% for Ni(II) and 100 wt% for Cd(II). In this mini-review, the option to use ILs, DESs and Cyanex 272 for the recovery of valuable metals from end-of-life WPCBs is presented. Next-generation recycling technologies, in contrast to the extraction of metals from acidic leachate preceded by thermal pre-treatment or from solid material only after thermal pre-treatment, have been developed with ILs and DESs using the ABS method, as well as Cyanex 272 (only after the thermal pre-treatment of WPCBs), with a process efficiency of 60–100 wt%. In this process, four new ILs are used: didecyldimethylammonium propionate, [N_10,10,1,1][C₂H₅COO], didecylmethylammonium hydrogen sulphate, [N_10,10,1,H][HSO₄], didecyldimethylammonium dihydrogen phosphate, [N_10,10,1,1][H₂PO₄], and tetrabutylphosphonium dihydrogen phosphate, [P_4,4,4,4][H₂PO₄]. The extraction of Cu(II), Ag(I) and other metals such as Al(III), Fe(II) and Zn(II) from solid WPCBs is demonstrated. Various additives are used during the extraction processes. The Analyst 800 atomic absorption spectrometer (FAAS) is used for the determination of metal content in the solid BM. The ICP-OES method is used for metal analysis. The obtained results describe the possible application of ILs and DESs as environmental media for upcycling spent electronic wastes. Full article

Manganese oxides (MnO_x) have been confirmed as the most promising candidates for aqueous zinc-ion batteries (AZIBs) due to their cost-effectiveness, high theoretical capacity, high voltage platforms, and environmental friendliness. However, in practical applications, AZIBs are hindered by the Jahn–Teller distortion (JTD) effect, primarily induced by Mn³⁺ (t_2g³e_g¹) in octahedral coordination, which leads to severe structural deformation, rapid capacity fading, and poor cycling stability. This review systematically outlines the fundamental mechanisms of JTD in MnO_x cathodes, including electronic structure changes, lattice distortions, and their side effects on Zn²⁺ storage performance. Furthermore, we critically discuss advanced strategies to suppress JTD, such as cation/anion doping, interlayer engineering, surface/interface modification, and electrolyte optimization, aimed at enhancing both structural stability and electrochemical performance. Finally, we propose future research directions, such as in situ characterization, machine learning-guided material design, and multifunctional interfacial engineering, to guide the design of high-performance MnO_x hosts for next-generation AZIBs. This review may provide a promising guideline for overcoming JTD challenges and advancing MnO_x-based energy storage systems. Full article

The widespread, worldwide utilisation of alkaline batteries requires development of proper recycling methods for used batteries, which are considered both as a secondary source of valuable metals and as a threat to the environment (may contain toxic substances). As many separation methods of metal ions from battery leachates are based on the use of substances that require complex synthesis or are not eco-safe, new materials suitable for this purpose are systematically sought. Therefore, in this study, the results of the separation of Ni(II), Zn(II) and Mn(II) ions from alkaline battery leachates using polymer materials (PMs) impregnated with easily synthesised, “green” deep eutectic solvents (DESs) or with ionic liquids (ILs) were presented. Additionally, PMs surface wettability were determined and their chemical compositions were analysed using the Fourier transform infrared spectroscopy–attenuated total reflectance (FTIR–ATR) method. Among all PMs synthesised, materials containing DESs (composed of Aliquat 336 or Cyphos IL 101 and diacetamide) performed best in the separation of Ni(II) ions (removal of 93.42% and 80.86%). The application of DES-based PMs for the separation of metal ions from battery leachates is in line with green chemistry principles, and such materials can potentially be used in the processing of e-waste. Full article

The increasing demand for safe, cost-effective, and sustainable energy storage solutions has spotlighted aqueous zinc-ion batteries (AZIBs) as promising alternatives to lithium-ion systems. However, the practical deployment of AZIBs remains hindered by dendritic growth, hydrogen evolution, and surface corrosion at the zinc metal anode, which severely compromise electrochemical stability. In this study, we propose an interfacial engineering strategy involving ultrathin diamond-like carbon (DLC) coatings applied to Zn anodes. The DLC films serve as conformal, ion-permeable barriers that mitigate parasitic side reactions and facilitate uniform Zn plating/stripping behavior. Materials characterizations of the DLC layer on the Zn anodes revealed the tunability of sp²/sp³ hybridization and surface morphology depending on DLC thickness. Electrochemical impedance spectroscopy demonstrated a significant reduction in interfacial resistance, particularly in the optimally coated sample (DLC2, ~20 nm), which achieved a favorable balance between mechanical integrity and ionic transport. Symmetric-cell tests confirmed enhanced cycling stability over 160 h, while full-cell configurations with an ammonium vanadate nanofiber-based cathode exhibited superior capacity retention over 900 cycles at 2 A g⁻¹. The DLC2-coated Zn anodes demonstrated the most effective performance, attributable to its moderate surface roughness, reduced disorder, and minimized charge-transfer resistance. These results provide insight into the importance of fine-tuning the DLC thickness and carbon bonding structure for suppressing dendrite formation and enhancing electrochemical stability. Full article

In this study, we couple precise interface engineering via alternating current electrophoretic deposition (AC–EPD) with performance-enhancing structural transformation via annealing, enabling the development of high-performance, stable, and tunable Mn-based cathodes for aqueous zinc-ion batteries (ZIBs). Using AC–EPD to fabricate Mn(BTC) (BTC = 1,3,5-benzenetricarboxylic acid) cathodes followed by thermal annealing to synthesize MOF-derived Mn₃O₄ offers a synergistic approach that addresses several key challenges in aqueous ZIB systems. The Mn₃O₄ cathode prepared via AC–EPD from Mn(BTC) exhibited a remarkable specific capacity of up to 430 mAh/g at a current density of 200 mA/g. Interestingly, the capacity continued to increase progressively with cycling, suggesting dynamic structural or interfacial changes that improved Zn²⁺ transport and utilization over time. Such capacity enhancement behavior during prolonged cycling at elevated rates has not been observed in previously reported Mn₃O₄-based ZIB systems. Kinetic analysis further revealed that the charge storage process is predominantly governed by diffusion-controlled mechanisms. This behavior can be attributed to the intrinsic characteristics of the Mn₃O₄ phase formed from the MOF precursor, where the bulk redox reactions involving Zn²⁺ insertion require ion migration into the electrode interior. Even though the electrode was processed as an ultrathin film with enhanced electrolyte contact, the charge storage remains limited by solid-state ion diffusion rather than fast surface-driven reactions, reinforcing the diffusion-dominant nature of the system. Full article

In this study, a Zn(CN)₂–V₂O₃–C composite cathode was synthesized via AC electrophoretic deposition (EPD) and evaluated for application in aqueous zinc-ion batteries (ZIBs). Here, we report for the first time a binder-free Zn(CN)₂–V₂O₃–C composite cathode, using AC-EPD to create an ultrathin architecture optimized for probing the electrode–electrolyte interface without interference from additives or bulk effects. The composite combines Zn(CN)₂ for structural support, V₂O₃ as the redox-active material, and carbon for improved conductivity. X-ray diffraction confirmed the presence of Zn(CN)₂ and V₂O₃ phases, while scanning electron microscopy revealed a uniform, ultrathin film morphology. Electrochemical analysis demonstrated a hybrid charge storage mechanism with a b-value of 0.64, indicating both capacitive and diffusion-controlled contributions. The electrode delivered a high specific capacity (~250 mAh/g at 500 mA/g) with stable cycling performance. These results highlight the potential of metal–organic framework-derived composites for high-performance ZIB cathodes. The composite is especially effective when prepared via AC-EPD, which yields ultrathin, uniform films with strong adhesion and low agglomeration. This enhances energy storage performance and provides a reliable platform for focusing on interfacial charge storage, excluding the effect of binders on electrochemical performance. Full article

Na-layered Li-containing Mn-based cathodes (Na_xLi_yMn_1-yO₂, NLMOs) with additional Na⁺ storage ability resulting from the anionic redox reaction (ARR) hold great promise for sodium-ion batteries (NIBs). However, practical applications of NLMOs encounter challenges, such as migration of transition metal Mn, loss of lattice oxygen, and voltage decay during cycling. Here, we show that Cu plays an important role in enhancing the ARR via the reductive coupling mechanism (RCM). Results shows that a Cu²⁺/Fe³⁺ modified NLMO sample delivers a Na⁺ storage capacity as high as 174 mA h g⁻¹ at 0.2C, higher than that of a Zn²⁺/Fe³⁺ modified NLMO sample (130 mA h g⁻¹) and NLMO (154 mA h g⁻¹). Both in situ and ex situ characterization results indicate that the obvious improvement in the electrochemical performance of the Cu²⁺/Fe³⁺ modified NLMO is due to the additional overlaps between the Cu 3d and O 2p orbitals, which is beneficial for the RCM. As a result, the ARR is enhanced so as to increase the Na⁺ storage capacity. Full article

Aqueous zinc–ion batteries (AZIBs) have garnered considerable attention owing to their inherent safety, cost-effectiveness, and promising electrochemical performance. However, challenges associated with Zn metal anodes, such as dendrite formation, corrosion, and hydrogen evolution, continue to impede their widespread adoption. To overcome these limitations, a flexible and self-standing composite film anode (denoted ZCN) is engineered from a synergistic combination of Zn powder, nanocellulose, and carbon fiber to serve as a high-performance alternative to conventional Zn foil. These three constituents play the roles of enhancing the active area, improving mechanical properties and electrolyte affinity, and establishing a conductive network, respectively. This innovative design effectively mitigates dendrite growth and suppresses parasitic side reactions, thereby significantly improving the cycling stability of ZCN. As a result, this electrode enables the Zn//Zn cell to offer an ultralong lifespan of 2000 h. And the Zn-MnO₂ battery with ZCN anode demonstrates remarkable performance, realizing over 80% capacity retention after 1000 cycles. This study presents a straightforward, scalable, and cost-effective strategy for the development of dendrite-free metal electrodes, paving the way for durable and high-performance AZIBs. Full article