Search Results (31)

Vital pulp therapy (VPT) is increasingly recognised as a biologically driven alternative to root canal treatment in teeth with deep caries and a vital pulp diagnosis. Resin-modified calcium silicate-based materials (RM-CSMs) were introduced to combine the bioactivity of traditional cements with improved handling and immediate light-curing, but their biological performance remains debated. Objectives: This systematic review and meta-analysis aimed to evaluate the clinical and radiographic outcomes of VPT performed with RM-CSMs compared with conventional non-resin-modified calcium silicate-based materials (NRM-CSMs) Methods: PRISMA Guidelines were followed to carry out this systematic review. Electronic databases (Medline, Embase, Scopus, and Web of Science) were searched up to October 2025 for randomised clinical trials evaluating indirect pulp capping, direct pulp capping, or pulpotomy. Nine trials met the inclusion criteria. Meta-analyses were performed for TheraCal LC, the only RM-CSM with sufficient clinical evidence. The risk of bias was assessed using the RoB 2 Tool. The certainty of evidence was assessed using GRADE. Results: Pooled results showed no significant differences in overall clinical–radiographic success between RM-CSMs and NRM-CSMs at 90 or 180 days. At 360 days, a trend favouring NRM-CSMs emerged, though not statistically significant. Dentine bridge formation at 360 days was significantly lower with TheraCal LC. Conclusions: Current RM-CSMs demonstrate comparable short-term success to conventional materials but still present biological limitations, particularly regarding long-term reparative outcomes. NRM-CSMs remain the preferred option when maximal bioactivity and predictable dentinogenesis are required Full article

Introduction: Direct pulp capping (DPC) aims to preserve the vitality of the dental pulp by placing a protective biocompatible material over the exposed pulp tissue to facilitate healing. There are several calcium-silicate materials that have been designed to promote mineralization and the regulation of inflammation. These have strong potential for the repair and regeneration of dental pulp. Among them, Biodentine (BD) and EndoSequence RRM Putty (ES) have been found to promote in vitro and in vivo mineralization while minimizing some of the limitations of the first-generation calcium-silicate-based materials. Theracal-LC (TLC), a light-cured, resin-modified calcium-silicate material, is a newer product with potential to improve the clinical outcomes of DPC, but existing studies have reported conflicting findings regarding its biocompatibility and ability to support pulpal healing in direct contact with the pulp. A comprehensive assessment of the biocompatibility and pulpal protection provided by these three capping materials has not yet been performed. Aim: We aimed to quantify the inflammatory response, dentin bridge formation, and material adaptation following DPC using three calcium-silicate materials: ES, BD, and TLC. Materials and Methods: DPC was performed on the maxillary first molar of C57BL/6 female mice. Maxilla were collected and processed at 1 and 21 days post-DPC. The early inflammatory response was measured 24 h post-procedure using confocal imaging of anti-Lys6G6C, which indicates the extent of neutrophil and monocyte infiltration. Reparative mineralized bridge formation was assessed at 21 days post-procedure using high-resolution micro-computed tomography (micro-CT) and histology. Lastly, the homogeneity of the capping materials was evaluated by quantifying voids in calcium-silicate restorations using micro-CT. Results: DPC using TLC induced less infiltration of Lys6G6C⁺ cells at 24 h than BD or ES. BD promoted higher volumes of tertiary dentin than TLC, but TLC and ES showed no significant differences in volume. No differences were observed in material adaptation and void spaces among the three capping materials. Conclusions: All three materials under investigation supported pulp healing and maintained marginal integrity. However, TLC induced a lower inflammatory response on day 1 and induced similar levels of tertiary dentin to ES. These observations challenge the common perception that resin-based capping materials are not suitable for direct pulp capping. Our findings underscore the need to balance biological responses with physical properties when selecting pulp capping materials to improve long-term clinical success. Full article

Preserving dental pulp vitality is crucial in pediatric and adolescent dentistry to promote long-term oral health and reduce the need for invasive procedures. Vital pulp therapy (VPT) enhances pulp healing and dentin formation through advanced pulp capping materials. While calcium hydroxide-based materials laid the foundation for VPT, calcium silicate-based materials like mineral trioxide aggregate, Biodentine, and TheraCal offer superior biocompatibility and sealing properties. Recent advancements focus on regenerative strategies that enhance biocompatibility, antibacterial efficacy, and anti-inflammatory effects. Tissue engineering approaches, including stem cells, growth factors, and peptide-based scaffolds, are being explored to improve pulp regeneration and long-term treatment success. This review highlights recent developments in VPT for pediatric and adolescent patients, emphasizing minimally invasive techniques, clinical challenges, and the potential of emerging biomaterials. Continued research into biomaterial efficacy and regenerative capabilities holds promise for advancing VPT, ensuring more effective and biologically driven treatment strategies for young patients. Full article

The ability of the cement to release calcium ions, which participate in the remineralization of dentin by forming apatite which improves root canal sealing with time, is of particular importance. Five recently introduced calcium-silicate commercial dental cements were investigated with a view to the influence of the physicochemical characteristics on the possibility of releasing calcium ions in an aqueous medium. Two hybrid calcium-silicate cements in the form of a paste-like ready mix (BioCal^® Cap and TheraCal LC) and three calcium-silicate cements consisting of two components—powder and liquid (Harvard MTA Universal, Rootdent, and BioFactor) were subjected to powder XRD, SEM, and EDS for detailed examination. The cements were immersed in water for 28 days and the phase composition and morphology of the cements before and after soaking were studied. The total calcium release for each cement was determined by ICP-OES. BioFactor and BioCal^® Cap release the highest amount of calcium ions, while the lowest release is registered with Rootdent and TheraCal LC. The PDT treatment of BioFactor does not influence substantially the calcium release. The impact of the elemental and phase composition on the calcium release and calcium carbonate formation was discussed. A reciprocal relation between the aluminum content and the quantity of the released calcium has been found. Full article

(1) Background: The aim of this study was to compare the cytotoxicity of selected resin-modified materials used in direct contact with the dental pulp (TheraCal LC, TheraCal PT, and ApaCal ART) with calcium silicate cement (Biodentine). (2) Methods: The mouse fibroblast Balb/3T3 cell line and the extracts of tested materials in four concentrations were used for the testing. An MTT assay was performed in three independent experiments with six replicates for each concentration of tested material. The cell viability (%) and cytotoxicity were expressed (cytotoxic effect is considered in cases where the cell viability is lower than 70%). The mean of the cell viability and the standard deviation were expressed for each material at all concentrations. ANOVA and Dunnet’s post hoc tests were used for the statistical analysis. All of these tests were performed at the 0.05 significance level. (3) Results: At all concentrations, the cell viability was statistically significantly lower (p ≤ 0.002) for all tested materials compared to Biodentine. ApaCal ART showed a high level of cytotoxicity at all concentrations (cell viability lower than 47.71%, p < 0.0001). The same result was found for TheraCal LC at concentrations of 100%, 50% and 25% and TheraCal PT at concentrations of 100% and 50%. TheraCal LC at a 10% concentration (cell viability 68.18%) and TheraCal PT at a 25% concentration (cell viability 60.63%) indicated potential cytotoxicity. TheraCal PT at a 10% concentration was not found to be cytotoxic (cell viability 79.18%, p = 0.095). (4) Conclusion: The resin-modified calcium silicate and calcium phosphate materials showed higher cytotoxic potential, so they should be used with caution when in direct contact with the dental pulp. Full article

Background: This retrospective clinical study aimed to assess dental pulp tissue reactions to direct and indirect pulp capping after 10 years of follow-up. Methods: A total of 276 permanent teeth with deep carious lesions were evaluated and divided into five groups: Group (1), direct pulp capping with Mineral Trioxide Aggregate cement; Group (2), direct pulp capping with a resin-based glass ionomer; Group (3), direct pulp capping with TheraCal; Group (4), indirect pulp capping with a three-step total-etch adhesive system; and Group (5), indirect pulp capping with a two-step self-etch adhesive system. Results: A 72.5% success rate was achieved overall. A statistically significant difference was found when comparing direct and indirect pulp capping with a success rate of 23.8% and 93.8%, respectively. For direct pulp-capping procedures, the area of pulp exposure was correlated with pulp necrosis (p = 0.035), while bleeding after exposure appeared independent (p = 0.053). Patient age was significantly related to the maintenance of pulp vitality (p = 0.013). A statistically significant correlation between the pulp-capping material and the occurrence of pulp necrosis was discovered (p = 0.017). For the indirect pulp-capping treatments, a significant correlation between patient age (p = 0.021) and the adhesive system (p = 0.019) with pulp necrosis was described. Conclusions: The pulp-capping material, patient age, and the width of the pulp exposure before the procedure should be carefully considered when performing direct pulp-capping treatments. The performance of the etch-and-rinse adhesive systems was superior to the self-etch system during the indirect pulp-capping procedures. Full article

This study aimed to evaluate the antimicrobial properties, cell viability, and matrix metalloproteinase (MMP) inhibition capacity of several endodontic materials aimed at vital pulp therapy: Pro Root MTA^®, EndoSequence^®, Biodentine^®, MTA Angelus^®, TheraCal LC^®, and BioC Repair^®. The materials were prepared according to the manufacturer’s instructions. Antimicrobial tests were conducted using a microcosm biofilm model, cell viability was assessed using murine fibroblasts (L929), and MMP activity was analyzed through electrophoresis. The results showed that BioC Repair^®, Biodentine^®, and EndoSequence^® exhibited similar antimicrobial properties, while MTA Angelus^® and ProRoot MTA^® had inferior results but were comparable to each other. In terms of cell viability, no significant differences were observed among the materials. EndoSequence^® demonstrated the highest MMP inhibition capacity. In conclusion, BioC Repair^®, Biodentine^®, EndoSequence^®, and TheraCal^® showed better antimicrobial properties among the tested materials. The materials did not exhibit significant differences in terms of cytotoxicity. However, EndoSequence^® displayed superior MMP inhibition capacity. Full article

This study aimed to assess the ability of modern resin-based “bioactive” materials (RBMs) to induce dentine remineralisation via mineral deposition and compare the results to those obtained with calcium silicate cements (CSMs). The following materials were employed for restoration of dentine cavities: CSMs: ProRoot MTA (Dentsply Sirona), MTA Angelus (Angelus), Biodentine (Septodont), and TheraCal LC (Bisco); RBMs: ACTIVA BioACTIVE Base/Liner (Pulpdent), ACTIVA Presto (Pulpdent), and Predicta Bioactive Bulk (Parkell). The evaluation of the mineral deposition was performed through scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) on the material and dentine surfaces, as well as at the dentine–material interface after immersion in simulated body fluid. Additionally, the Ca/P ratios were also calculated in all the tested groups. The specimens were analysed after setting (baseline) and at 24 h, 7, 14, and 28 days. ProRoot MTA, MTA Angelus, Biodentine, and TheraCal LC showed significant surface precipitation, which filled the gap between the material and the dentine. Conversely, the three RBMs showed only a slight ability to induce mineral precipitation, although none of them was able to remineralise the dentine–material interface. In conclusion, in terms of mineral precipitation, modern “bioactive” RBMs are not as effective as CSMs in inducing dentine remineralisation; these latter represent the only option to induce a possible reparative process at the dentin–material interface. Full article

Due to significant tissue loss in teeth requiring pulp treatments, hermetic restoration of the remaining dental tissues is one of the most crucial factors in determining the treatment’s success. The adhesion of composite resins to calcium silicate cements (CSCs) is considered challenging. Consequently, it is crucial to identify the optimal method for obtaining optimal adhesion. The aim of the present study is to evaluate the shear bond strength (SBS) values of immediate and delayed restorations with fiber-reinforced composites on powder–liquid, premixed, and resin-containing flowable CSCs. In the present study, the SBS values obtained after immediate (14 min) and delayed (7 days) restorations of three different CSCs (NeoMTA2, NeoPutty, and TheraCal PT) with three different resin composite materials (EverX Flow^TM, EverX Posterior^TM, and Filtek Z550) were compared. The fracture types were evaluated using a stereomicroscope and SEM. TheraCal PT had the highest SBS values for both immediate and delayed restorations, and the comparison with other materials showed a statistically significant difference (p = 0.001). In contrast, there was no statistically significant difference between the SBS values of NeoMTA and NeoPutty (p > 0.05). In both immediate and delayed restorations, there was no statistically significant difference between nanohybrid and fiber-reinforced composites (p > 0.05). The simple use and strong bonding ability of TheraCal PT with composite resins may provide support for the idea that it is suitable for pulpal interventions. Nevertheless, due to the in vitro nature of this study, additional in vitro and clinical studies are required to investigate the material’s physical, mechanical, and biological properties for use in clinical applications. Full article

The objective of this study was to assess and compare the internal adaptation of various pulp-capping materials, namely TheraCal, Biodentine, and mineral trioxide aggregate (MTA), on the dentin of permanent teeth through the utilization of micro-computed tomography (MCT) and optical coherence tomography (OCT). Thirty permanent molars were divided into three groups using a random process: group A (TheraCal), group B (Biodentine), and group C (MTA, which served as the control group). On the buccal surface of each tooth, a class V cavity of a standardized cylindrical shape was prepared. Subsequently, the respective pulp-capping material was applied to the cavity based on the assigned group, followed by restoration with composite resin. Based on the MCT results, it was observed that group A had a considerably larger gap volume in comparison to groups B and C (p < 0.001). There was no significant difference in gap volume between groups B and C. Regarding the OCT findings, group A displayed a substantially higher level of light reflection than groups B and C (p < 0.001). Group C exhibited a significantly lower level of light reflection in comparison to group B (p < 0.001). Biodentine and MTA revealed similar outcomes in terms of how well they adhered to the dentinal surface in permanent teeth. Both materials exhibited superior performance in comparison to TheraCal. The utilization of OCT in clinical practice could be advantageous as it enables dentists to monitor and evaluate restorations during post-treatment follow-up. It is imperative to intensify efforts aimed at making OCT equipment more accessible and applicable, overcoming its current limitations, and allowing for its widespread utilization in clinical practice. Full article

This study prepared low-toxicity, elemental-releasing resin-modified glass ionomer cements (RMGICs). The effect of 2-hydroxyethyl methacrylate (HEMA, 0 or 5 wt%) and Sr/F-bioactive glass nanoparticles (Sr/F-BGNPs, 5 or 10 wt%) on chemical/mechanical properties and cytotoxicity were examined. Commercial RMGIC (Vitrebond, VB) and calcium silicate cement (Theracal LC, TC) were used as comparisons. Adding HEMA and increasing Sr/F-BGNPs concentration decreased monomer conversion and enhanced elemental release but without significant effect on cytotoxicity. Rising Sr/F-BGNPs reduced the strength of the materials. The degree of monomer conversion of VB (96%) was much higher than that of the experimental RMGICs (21–51%) and TC (28%). The highest biaxial flexural strength of experimental materials (31 MPa) was significantly lower than VB (46 MPa) (p < 0.01) but higher than TC (24 MPa). The RMGICs with 5 wt% HEMA showed higher cumulative fluoride release (137 ppm) than VB (88 ppm) (p < 0.01). Unlike VB, all experimental RMGICs showed Ca, P, and Sr release. Cell viability in the presence of extracts from experimental RMGICs (89–98%) and TC (93%) was significantly higher than for VB (4%). Experimental RMGICs showed desirable physical/mechanical properties with lower toxicity than the commercial material. Full article

Background: The aim of the present study was to compare the biological and mechanical properties of a novel dual-cure, resin-modified calcium silicate material, Theracal PT^® (TP), with those of Theracal LC^® (TL) and Biodentine^TM (BD). Methods: The cell counting kit-8 was used on human dental pulp cells to test cell the viability of the three materials. Antibacterial activity of TP, TL, and BD against Enterococcus faecalis was investigated under anaerobic conditions. The ability of the materials to support odontogenic differentiation was studied by examining the relative gene expression of osteocalcin (OCN), osteopontin (OPN), and Collagen I (ColI) using real-time polymerase chain reaction. For mechanical property tests, microhardness was evaluated using the Vickers microhardness (VHN) test, and the bond strength to the resin was evaluated using a shear bond test machine. Results: There was no significant difference in cell viability between TL and TP after 48 h, and BD showed the highest cell viability, while TP showed the highest antibacterial effect. At the 12-h time point, there was no significant difference in ColI and OCN expression between BD and TP, but TP showed a higher expression of OPN than BD. However, at the 48-h time point, ColI and OCN showed higher levels of expression for BD than for TP and TL. At the same time point, only OPN had a higher diffusion for TP than for BD. TP demonstrated a VHN of approximately 30–35. This value was higher than that of TL and lower than that of BD. In contrast to VHN, the shear bond strength to resin was significantly higher for TL and TP than for BD. Conclusion: TP showed lower biocompatibility than BD but higher OPN expression and antibacterial effects than BD and TL. TP showed higher shear bond strength than BD and higher VHN than TL and BD at the 24-h time point. Full article

The aim of this study was to evaluate the biocompatibility of the regeneration of the dentin–pulp complex in a murine model with different treatments with MTA Angelus, NeoMTA, and TheraCal PT. An in vivo controlled experimental study of 15 male Wistar rats forming three study groups, the upper and lower central incisors were selected where pulpotomies were conducted, leaving a central incisor as control at 15, 30, and 45 days. For data analysis, these were expressed as mean ± standard deviation and were examined by Kruskal–Wallis test. Three factors were analyzed as follows: “inflammatory infiltrate; disorganization of pulp tissue, and the formation of reparative dentin”. No statistical significance was found between the different groups (p > 0.05). Treatment with these three biomaterials (MTA, TheraCal PT, and Neo MTA) presented an inflammatory infiltrate and slight disorganization of the odontoblast layer in the pulp tissue of a murine model, with normal coronary pulp tissue and the formation of reparative dentin in the three experimental groups. Thus, we are able to conclude that all three are biocompatible materials. Full article

The present research study assessed the cell viability and cytotoxic effect of mineral tri-oxide aggregate (MTA), Tetric N-Bond Universal bonding agent, Theracal PT (pulpotomy treatment), and platelet-rich fibrin (PRF) as pulp capping agents on human dental pulp stem cells (hDPSCs). The cells were isolated from the pulp tissue of an extracted healthy permanent third molar. After four passages in Dulbecco’s Modified Eagle’s Medium, the primary cells were employed for the investigation. The test materials and untreated cells (negative control) were subjected to an Methylthiazol-diphenyl-tetrazolium (MTT) cytotoxicity assay and assessed at 24-, 48-, and 72-h intervals. The Wilcoxon matched-paired t-test and Kruskal–Wallis analysis of variance (ANOVA) test were applied (p < 0.05). PRF imparted the highest cell viability at 48 h (p < 0.001), followed by MTA, Theracal PT, and Tetric N-Bond. Similarly, PRF had the highest potential to enhance cell proliferation and differentiation (p < 0.001), followed by Theracal PT, MTA, and the bonding agent at the end of 24 h and 72 h, respectively. Finally, PRF sustained the viability of human primary dental pulp stem cells more effectively than Theracal PT and MTA; however, the application of a Tetric N-Bond as a pulp capping agent was ineffective. Full article

Calcium silicate-based cements (CSCs) are endodontic materials widely used in vital pulp-capping approaches. Concerning the clinical application, the reduced set time and pre-mixed formulations are relevant characteristics during the operative management of pulpal exposure, aiming to optimise the work time and improve cross-infection/asepsis control. Additionally, clinical success seems to be greatly dependent on the biological performance of the materials that directly contact the living pulp. As such, this work approaches an integrative biological characterisation (i.e., antibacterial, irritation, and cytocompatibility assays) of three fast-setting CSCs—Biodentine^TM, TotalFill^® BC RRM™ Fast Putty, and Theracal LC^®. These cements, after setting for 24 h, presented the expected topography and elemental composition (assessed by scanning electron microscopy, coupled with EDS analysis), in accordance with the information of the manufacturer. The set cements displayed a significant and similar antibiofilm activity against S. mutans, in a direct contact assay. Twenty-four-hour eluates were not irritant in the standardised CAM assay, but elicited distinct dose- and time-dependent cytotoxicity profiles on fibroblastic cells—i.e., Biodentine was devoid of toxicity, TotalFill presented a slight dose-dependent initial toxicity that was easily overcome, and Theracal LC was deleterious at high concentrations. When compared to long-setting ProRoot MTA cement, which highlighted the pursued integrative approach, Biodentine presented a similar profile, but TotalFill and Theracal LC displayed a poorer performance regarding antibiofilm activity/cytocompatibility features, and Theracal LC suggested eventual safety concerns. Full article