Search Results (44)

Over 292 million tons of municipal solid waste (MSW) are generated annually in the United States, with more than half disposed of in landfills. Municipal solid waste landfills (MSWLFs) are stationary sources of air pollution and potential health risks for nearby communities. The Agency for Toxic Substances and Disease Registry (ATSDR) has completed over 300 public health assessments (PHAs) and related investigations at MSWLFs and open dumps since the 1980s. This paper reviews the ATSDR’s evaluations of air pathway concerns at 125 MSWLF sites assessed between 1988 and early 2025, with many being evaluated during the 1990s. Most sites were located in the Midwest and Northeast, and only 25% remained active. The ATSDR found no air-related public health hazard at 86% of sites. At sites where hazards were identified, common issues included elevated outdoor or indoor toxicants (e.g., hydrogen sulfide, benzene, trichloroethylene, and mercury) and unsafe methane accumulations. Contributing factors included older site designs, inadequate gas-collection, subsurface fires, and distance from nearby residences. Corrective actions effectively reduced exposures at the affected sites. Results suggest that well-located and maintained landfills minimize public health hazards, while aging or poorly managed sites pose risks. Continued monitoring and research are warranted as waste management shifts toward reducing, reusing, recycling, composting, and energy-recovery technologies to improve efficiency, advance technologies, and address systemic public health challenges. Full article

The outlook for biobased plastics in packaging applications is increasingly promising, driven by a combination of environmental advantages, technological innovation, and shifting market dynamics. Derived from renewable biological resources, these materials offer compelling benefits over conventional fossil-based plastics. They can substantially reduce greenhouse gas emissions, are often recyclable or biodegradable, and, in some cases, require less energy to produce. These characteristics position biobased plastics as a key solution to urgent environmental challenges, particularly those related to climate change and resource scarcity. Biobased plastics also demonstrate remarkable versatility. Their applications range from high-performance barrier layers in multilayer packaging to thermoformed containers, textile fibers, and lightweight plastic bags. Notably, all major fossil-based packaging applications can be substituted with biobased alternatives. This adaptability enhances their commercial viability across diverse sectors, including food and beverage, pharmaceutical, cosmetics, agriculture, textiles, and consumer goods. Several factors are accelerating growth in this sector. These include the increasing urgency of climate action, the innovation potential of biobased materials, and expanding government support through funding and regulatory initiatives. At the same time, consumer demand is shifting toward sustainable products, and companies are aligning their strategies with environmental, social, and governance (ESG) goals—further boosting market momentum. However, significant challenges remain. High production costs, limited economies of scale, and the capital-intensive nature of scaling biobased processes present economic hurdles. The absence of harmonized policies and standards across regions, along with underdeveloped end-of-life infrastructure, impedes effective waste management and recycling. Additionally, consumer confusion around the disposal of biobased plastics—particularly those labeled as biodegradable or compostable—can lead to contamination in recycling streams. Overcoming these barriers will require a coordinated, multifaceted approach. Key actions include investing in infrastructure, advancing technological innovation, supporting research and development, and establishing clear, consistent regulatory frameworks. Public procurement policies, eco-labeling schemes, and incentives for low-carbon products can also play a pivotal role in accelerating adoption. With the right support mechanisms in place, biobased plastics have the potential to become a cornerstone of a sustainable, circular economy. Full article

Additive manufacturing (AM) techniques, especially fused deposition modeling (FDM), offer significant advantages in terms of cost, material efficiency, and design flexibility. In this study, the mechanical performance of biodegradable PLA/PHA composite samples produced via FDM was optimized by evaluating the influence of key printing parameters—layer height, printing orientation, and printing speed—on both the tensile and compressive strength. A full factorial design (3 × 3 × 3) was employed, and all of the samples were triplicated to ensure the consistency of the results. Grey relational analysis (GRA) was used as a multi-objective optimization method to determine the optimal parameter combinations. An analysis of variance (ANOVA) was also conducted to assess the statistical significance of each parameter. The ANOVA results revealed that printing orientation is the most significant parameter for both tensile and compression strength. The optimal parameter combination for maximizing mechanical properties was a layer height of 0.1 mm, an X printing orientation, and a printing speed of 50 mm/s. This study demonstrates the effectiveness of GRA in optimizing the mechanical properties of biodegradable composites and provides practical guidelines to produce environmentally sustainable polymer parts. Full article

This review addresses the growing demand for sustainable alternatives to conventional synthetic nets used in marine and agricultural applications, which are often persistent, poorly degradable, and difficult to manage at end of life. It examines recent developments in biodegradable polymers—particularly polylactic acid (PLA), polyhydroxyalkanoates (PHAs), and poly(butylene adipate-co-terephthalate) (PBAT)—alongside reinforced blends and nanocomposites designed to improve mechanical performance and degradation behavior under real-world conditions. Strategies based on the regeneration of discarded nets, especially those made from polyamide 6 (PA6), are also considered for their potential to close material loops and reduce environmental leakage. A critical analysis of current testing protocols and regulatory frameworks is provided to assess their suitability for novel materials. In addition, this study highlights the emergence of multifunctional nets capable of providing environmental sensing or biological support, marking a transition toward adaptive and ecosystem-responsive designs. Finally, a survey of ongoing European and international projects illustrates scalable pathways for implementing biodegradable and recyclable netting systems, integrating material innovation with circular economy strategies. These findings emphasize the need for harmonized standards, targeted environmental testing, and cross-sectoral collaboration to enable the large-scale adoption of sustainable net technologies. Full article

The depletion of fossil fuels and environmental concerns have driven the development of sustainable materials, including bio-based and biodegradable plastics, as alternatives to conventional plastics. Although these plastics aid in waste management and climate change mitigation, their vulnerability to oxidative degradation impacts their longevity, durability, and performance. Natural antioxidants such as tocopherols, flavonoids, and tannins, extracted from plants or agri-food waste, present a sustainable alternative to synthetic stabilizers by enhancing the oxidative thermal stability of polymers like poly(lactic acid) (PLA), poly(butylene succinate) (PBS), poly(butylene succinate-adipate) (PBSA), poly(butylene adipate-co-terephthalate) (PBAT), poly(hydroxyalkanoate) (PHA), and starch-based materials. This review highlights recent advances in bio-based plastics stabilized with natural antioxidants, their mechanisms of action, and their role in improving material properties for applications like packaging. Additionally, it explores their impact on recycling processes, advancements in composite production techniques, and future research directions. Bioplastics can achieve enhanced performance, reduce waste, and support a circular economy by incorporating natural antioxidants. Full article

Oyster farming plays a crucial role in sustainable food production due to its high nutritional value and relatively low environmental impact. However, in a scenario of increasing production, it is necessary to consider the issue of plastic use as a limitation to be addressed. A life cycle assessment (LCA) was conducted on oyster farming in La Spezia (Italy) as a case study, utilizing 1 kg of packaged oysters as the functional unit. Fossil-based plastics and wooden packaging were identified as the primary environmental concerns. To analyze potential strategies for reducing the environmental impact of oyster farming, alternative scenarios were considered wherein fossil-based materials were replaced with bio-based materials. Specifically, this study examined the substitution of the current packaging, consisting of a wooden box and a polypropylene (PP) film, with a fully recyclable PP net. Additionally, polylactic acid (PLA), polyhydroxyalkanoates (PHAs), and bio-based polyethylene terephthalate (Bio-PET) were proposed as alternatives to virgin high-density polyethylene (HDPE) and PP for buoys, oyster bags, and boxes. Among the scenarios analyzed, the sole effective strategy to reduce the impact of plastics on the process is to replace them with PHA. In the other cases, the high energy consumption of their non-optimized production renders them disadvantageous options. However, the assessment must include the effects of degradation that traditional plastics can have in the marine environment, an aspect that potentially renders natural fibers more advantageous. The use of PP net packaging has demonstrated high efficacy in reducing impacts and provides a foundation for considering the need to combine sustainability and marketing with current legislation regarding food packaging. Full article

A polymer is a long-chain molecule formed by linking numerous simpler repeating chemical units, known as monomers, with identical structures. Over the past two centuries, there has been a significant increase in the global production and use of petrochemical-based plastics. This surge has led to widespread ecological imbalances, affecting air quality, terrestrial and marine ecosystems, food chains, and plant life. Consequently, the excessive use of such polymers has created challenges in solid waste management, with methods like bio- or photo-degradation, incineration, landfilling, and recycling proving to be time-consuming and laborious. Therefore, there is a growing urgency for biodegradable polymers due to increasing demand. Biodegradable polymers consist of interconnected monomers with unstable links in the backbone, facilitated by various functional groups. Throughout the degradation process of these polymers, numerous biologically acceptable molecules are produced. This study examines the significance of biopolymers over petroleum-based counterparts, offering a detailed analysis. It is noteworthy that within the spectrum of biodegradable polymers, polyhydroxyalkanoates (PHAs) emerge as exceptionally promising candidates for substituting petroleum-derived polymers, owing to their remarkable physical attributes. Therefore, this study provides a systematic overview of PHAs, including their classification, historical background, methods of production, potential challenges to commercialization, and diverse applications. Full article

Biodegradable biobased polymers derived from biomass (such as plant, animal, marine, or forestry material) show promise in replacing conventional petrochemical polymers. Research and development have been conducted for decades on potential biodegradable biobased polymers such as polylactic acid (PLA), polyhydroxyalkanoates (PHAs), and succinate polymers. These materials have been evaluated for practicality, cost, and production capabilities as limiting factors in commercialization; however, challenges, such as the environmental limitations on the biodegradation rates for biodegradable biobased polymer, need to be addressed. This review provides a history and overview of the current development in the synthesis process and properties of biodegradable biobased polymers, along with a techno-commercial analysis and discussion on the environmental impacts of biodegradable biobased polymers. Specifically, the techno-commercial analysis focuses on the commercial potential, financial assessment, and life-cycle assessment of these materials, as well as government initiatives to facilitate the transition towards biodegradable biobased polymers. Lastly, the environmental assessment focuses on the current challenges with biodegradation and methods of improving the recycling process and reusability of biodegradable biobased polymers. Full article

Today, 98% of all plastics are fossil-based and non-biodegradable, and globally, only 9% are recycled. Microplastic and nanoplastic pollution is just beginning to be understood. As the global demand for sustainable alternatives to conventional plastics continues to rise, biobased and biodegradable plastics have emerged as a promising solution. This review article delves into the pivotal concept of carbon recycling as a pathway towards achieving a zero-waste future through the production and utilization of high-value bioplastics. The review comprehensively explores the current state of bioplastics (biobased and/or biodegradable materials), emphasizing the importance of carbon-neutral and circular approaches in their lifecycle. Today, bioplastics are chiefly used in low-value applications, such as packaging and single-use items. This article sheds light on value-added applications, like longer-lasting components and products, and demanding properties, for which bioplastics are increasingly being deployed. Based on the waste hierarchy paradigm—reduce, reuse, recycle—different use cases and end-of-life scenarios for materials will be described, including technological options for recycling, from mechanical to chemical methods. A special emphasis on common bioplastics—TPS, PLA, PHAs—as well as a discussion of composites, is provided. While it is acknowledged that the current plastics (waste) crisis stems largely from mismanagement, it needs to be stated that a radical solution must come from the core material side, including the intrinsic properties of the polymers and their formulations. The manner in which the cascaded use of bioplastics, labeling, legislation, recycling technologies, and consumer awareness can contribute to a zero-waste future for plastics is the core topics of this article. Full article

Blends of polylactic acid (PLA) with amorphous polyhydroxyalkanoate (aPHA) are less brittle than neat PLA, thus enabling their use as biodegradable packaging. This work investigated the impact of recycling on the properties of neat PLA and PLA/aPHA blends with 90 and 75 wt. % PLA. After the materials were subjected to five heat histories in a single-screw extruder, the mechanical, rheological, and thermal properties were measured. All recycled compounds with 100% PLA and 75% PLA had similar decomposition behavior, whereas the decomposition temperatures for the blends with 90% PLA decreased with each additional heat cycle. The glass transition and melting temperatures were not impacted by reprocessing, but the crystallinity increased with more heat cycles. The complex viscosity of the reprocessed PLA and PLA/aPHA blends was much lower than for the neat PLA and increasing the number of heat cycles produced smaller reductions in the complex viscosity of 100% PLA and the blend with 90% PLA; no change in complex viscosity was observed for blends with 75% PLA exposed to 2 to 5 heat cycles. The tensile properties were not affected by reprocessing, whereas the impact strength for the 75% PLA blend decreased with reprocessing. These properties suggest that users will be able to incorporate scrap into the neat resin for thermoformed packaging. Full article

Polyhydroxyalkanoates (PHAs) are high-value biodegradable polyesters with thermoplastic properties used in the manufacturing of different products such as packaging films. PHAs have gained much attention from researchers and industry because of their biobased nature and appropriate features, similar to conventional synthetic plastics. This review aims to discuss some of the recent solutions to challenges associated with PHA production. The implementation of a cost-effective process is presented by following different strategies, such as the use of inexpensive carbon sources, the selection of high-producing microorganisms, and the functionalization of the final materials to make them suitable for food packaging applications, among others. Research efforts are needed to improve the economic viability of PHA production at a large scale. Haloferax mediterranei is a promising producer of PHAs due to its ability to grow in non-sterile conditions and the possibility of using seawater to prepare the growth medium. Additionally, downstream processing for PHA extraction can be simplified by treating the H. mediterranei cells with pure water. Further research should focus on the optimization of the recycling conditions for the effluents and on the economic viability of the side streams reutilization and desalinization as an integrated part of PHA biotechnological production. Full article

Global pollution from fossil plastics is one of the top environmental threats of our time. At their end-of-life phase, fossil plastics, through recycling, incineration, and disposal result in microplastic formation, elevated atmospheric CO₂ levels, and the pollution of terrestrial and aquatic environments. Current regional, national, and global regulations are centered around banning plastic production and use and/or increasing recycling while ignoring efforts to rapidly replace fossil plastics through the use of alternatives, including those that occur in nature. In particular, this review demonstrates how microbial polyhydroxyalkanoates (PHAs), a class of intrinsically natural polymers, can successfully remedy the fossil and persistent plastic dilemma. PHAs are bio-based, biosynthesized, biocompatible, and biodegradable, and thus, domestically and industrially compostable. Therefore, they are an ideal replacement for the fossil plastics pollution dilemma, providing us with the benefits of fossil plastics and meeting all the requirements of a truly circular economy. PHA biopolyesters are natural and green materials in all stages of their life cycle. This review elaborates how the production, consumption, and end-of-life profile of PHAs are embedded in the current and topical, 12 Principles of Green Chemistry, which constitute the basis for sustainable product manufacturing. The time is right for a paradigm shift in plastic manufacturing, use, and disposal. Humankind needs alternatives to fossil plastics, which, as recalcitrant xenobiotics, contribute to the increasing deterioration of our planet. Natural PHA biopolyesters represent that paradigm shift. Full article

Polyhydroxyalkanoates (PHA) polymers are emerging within biobased biodegradable plastic products. To build a circular economy, effective recycling routes should be established for these and other end-of-life bioplastics. This study presents the first steps of a potential PHA recycling route by fermenting hydrolyzed PHA-based bioplastics (Tianan ENMATTM Y1000P; PHBV (poly(3-hydroxybutyrate-co-3-hydroxyvalerate)) into carboxylates acetate and butyrate. First, three different hydrolysis pretreatment methods under acid, base, and neutral pH conditions were tested. The highest 10% (from 158.8 g COD/L to 16.3 g COD/L) of hydrolysate yield was obtained with the alkaline pretreatment. After filtration to remove the remaining solid materials, 4 g COD/L of the hydrolyzed PHA was used as the substrate with the addition of microbial nutrients for mixed culture fermentation. Due to microbial conversion, 1.71 g/L acetate and 1.20 g/L butyrate were produced. An apparent complete bioconversion from intermediates such as 3-hydroxybutyrate (3-HB) and/or crotonate into carboxylates was found. The overall yields of the combined processes were calculated as 0.07 g acetate/g PHA and 0.049 g butyrate/g PHA. These produced carboxylates can theoretically be used to reproduce PHA or serve many other applications as part of the so-called carboxylate platform. Full article

The existing recycling methods of PHA-based material are ineffective in terms of increasing resource efficiency and the production of high value end-of-life products. Therefore, in this study, a novel approach of acidogenic fermentation was proposed to recycle PHB-based composites reinforced with natural fibers such as cellulose, chitin, chitosan, orange waste, sawdust, soy protein, and starch. The inclusion of cellulose, chitosan, and sawdust improved the impact properties of the composites while other fillers had various effects on the mechanical properties. These three composites and neat PHB were subsequently subjected to biological degradation via acidogenic digestion to determine the possibility of converting PHB-based composites into volatile fatty acids (VFAs). Two different pH levels of 6 and 10 were applied to assess the effect of pH on the bioconversion and inhibition of the methanogenesis. The results showed promising PHB degradation, contributing to considerable VFA production of 2.5 g/L at pH 6 after 47 days. At pH 6, the presence of the natural fibers in the biocomposites promoted the degradation rate. On the contrary, pH 10 proved to be more suitable for the degradation of the fibers. The VFA which is produced can be recirculated into PHB production, fitting with the concept of a circulating bioeconomy. Full article

Biobased and biocompatible polymers, such as polyhydroxyalkanoates (PHAs), are of great interest for a large range of applications in the spirit of green chemistry and upcoming reuse and recycling strategies. Polyhydroxybutyrate (PHB), as a promising biocompatible polymer belonging to PHAs, is subject to increased research concern regarding the high degree of crystallinity and brittle behavior of the resulting materials. Therefore, the improvement of PHB’s physico-mechanical properties aims to decrease the Young’s modulus values and to increase the ductility of samples. Here, we proposed an ambitious approach to develop melt-processed materials, while combining PHB characteristics with the ductile properties of poly(ε-caprolactone) (PCL). In order to compatibilize the poorly miscible PHB/PCL blends, dicumyl peroxide (DCP) was used as a free-radical promotor of polyester interchain reactions via the reaction extrusion process. The resulting PHB/PCL-DCP materials revealed a slight increase in the elongation at break, and significant improvement in the impact resistance (7.2 kJ.m⁻²) as compared to PHB. Additional decrease in the Young’s modulus values was achieved by incorporating low molecular polyethylene glycol (PEG) as a plasticizer, leading to an important improvement in the impact resistance (15 kJ.m⁻²). Successful 3D printing using fused deposition melting (FDM) of the resulting PHB/PCL-based blends for the design of a prosthetic finger demonstrated the great potential of the proposed approach for the development of next-generation biomaterials. Full article