Search Results (16)

The formation of unstable solid electrolyte interphases (SEIs) on the surface of lithium metal anodes poses a significant barrier to the commercialization of lithium metal batteries (LMBs). Rational modulation of solvation structures within the electrolytes emerged as one of the most effective strategies to enhance interfacial stability in LMBs; however, this approach often compromises the structural stability of the bulk electrolyte. Herein, we present an innovative method that improves interface stability without adversely affecting the bulk electrolyte’s structural stability. By employing ZSM molecular sieves as efficient ion channels on the lithium metal anode surface—termed ZSM electrolytes—a more aggregated solvation structure is induced at the lithium metal interface, resulting in an anion-rich interphase. This anion-enriched environment promotes the formation of an SEI derived from anions, thereby enhancing the stability of the lithium metal interface. Consequently, Li||Cu cells utilizing the ZSM electrolyte achieve an average coulombic efficiency (CE) of 98.76% over 700 h. Moreover, LiFePO₄||Li batteries exhibit stable cycling performance exceeding 900 cycles at a current density of 1 C. This design strategy offers robust support for effective interfacial regulation in lithium metal batteries. Full article

This study investigates the impact of low-intensity continuous ultrasound (LICU) on pancreatic adenocarcinoma (PANC-1) spheroids, emphasizing morphological and volumetric transformations. PANC-1 spheroids were cultured and treated with LICU across frequencies from 1 to 5 MHz. Cell viability and mortality were analyzed through Calcein AM/PI staining, while volumetric and morphological changes were quantified across frequencies from 2 to 4 MHz using advanced imaging techniques and computational tools, including a custom Python OpenCv Library, AnaSP 3.0, a MATLAB based open source tool. Notably, a frequency of 3.5 MHz yielded optimal outcomes, also achieving a reduction in spheroid volume and mortality while minimizing disgregation, a factor linked to metastasis risk. These findings underscore LICU’s potential as an effective therapeutic strategy, balancing tumor reduction with the preservation of structural cohesion. The study establishes a methodological framework for optimizing LICU parameters, presenting a less invasive avenue for improving therapeutic outcomes in pancreatic cancer treatment. Full article

This research examined the biochemical and microbiological characteristics of linen–copper (LI-Cu) composite materials, which were synthesized using magnetronsputtering techniques. The LI-Cu composites underwent comprehensive physicochemical and biological analyses. Physicochemical evaluations included elemental analysis (C, O, Cu), microscopic examination, and assessments of surface properties such as specific surface area and total pore volume. Biological evaluations encompassed microbiological tests and biochemical–hematological assessments, including the activated partial thromboplastin time (aPTT) and prothrombin time (PT). We determined the effect of LI-Cu materials on the viability and DNA damage in peripheral blood mononuclear (PBM) cells. Moreover, we studied the interactions of LI-Cu materials with plasmid DNA using a plasmid relaxation assay. The antimicrobial activity of LI-Cu composites was assessed using methodologies consistent with the EN ISO 20645:2006 and EN 14119:2005 standards. Specimens of the tested material were placed on inoculated agar plates containing representative microorganisms, and the extent of growth inhibition zones was measured. The results demonstrated that the modified materials exhibited antimicrobial activity against representative strains of Gram-positive and Gram-negative bacteria, as well as fungi. The results showed the cyto- and genotoxic properties of LI-Cu against PBM cells in a time- and power-dependent manner. Furthermore, the LI-Cu composite exhibited the potential for direct interaction with plasmid DNA. Full article

Exosomes are extracellular nanovesicles secreted by cells that efficiently deliver therapeutic cargo for cancer treatment. However, because exosomes are present in low quantities and have limited target specificity, internal and external stress stimulation has been studied to increase exosome efficiency. Inspired by these studies, the uptake efficiency of cobalt chloride-induced hypoxic cancer cell-secreted exosomes was evaluated. Western blotting and RT-PCR data revealed increased exosome secretion and different protein compositions exhibited by hypoxic exosomes (H-Exos) compared to natural normoxic exosomes (N-Exos). Furthermore, these H-Exos were continuously stimulated using low-intensity ultrasound (LICUS) at an intensity of 360 mW/cm² and a frequency of 3 MHz in vitro and 1 MHz in vivo. Hyperthermic and mechanical stress caused by ultrasound successfully improved exosome uptake via clathrin-mediated pathways, and confocal laser microscopy showed strong internal localization near the target cell nuclei. Finally, LICUS-equipped H-Exos were loaded with hydrophobic curcumin (H-Exo-Cur) and used to treat parent HepG2 liver cancer cells. The UV–Vis spectrophotometer displayed enhanced stability, solubility, and concentration of the encapsulated drug molecules. In MTT and FACS studies, approximately 40 times higher cell death was induced, and in animal studies, approximately 10 times higher tumor sizes were suppressed by LICUS-assisted H-Exo-Cur compared to the control. In this study, the delivery platform constructed demonstrated enormous potential for liver cancer therapy. Full article

Developing a reasonable design of a lithiophilic artificial solid electrolyte interphase (SEI) to induce the uniform deposition of Li⁺ ions and improve the Coulombic efficiency and energy density of batteries is a key task for the development of high-performance lithium metal anodes. Herein, a high-performance separator for lithium metal anodes was designed by the in situ growth of a metal–organic framework (MOF)-derived transition metal sulfide array as an artificial SEI on polypropylene separators (denoted as Co₉S₈-PP). The high ionic conductivity and excellent morphology provided a convenient transport path and fast charge transfer kinetics for lithium ions. The experimental data illustrate that, compared with commercial polypropylene separators, the Li//Cu half-cell with a Co₉S₈-PP separator can be cycled stably for 2000 h at 1 mA cm⁻² and 1 mAh cm⁻². Meanwhile, a Li//LiFePO₄ full cell with a Co₉S₈-PP separator exhibits ultra-long cycle stability at 0.2 C with an initial capacity of 148 mAh g⁻¹ and maintains 74% capacity after 1000 cycles. This work provides some new strategies for using transition metal sulfides to induce the uniform deposition of lithium ions to create high-performance lithium metal batteries. Full article

Dendrite growth and parasitic reactions with liquid electrolyte are the two key factors that restrict the practical application of the lithium metal anode. Herein, a bis(benzene sulfonyl)imide based single-ion polymer artificial layer for a lithium metal anode is successfully constructed, which is prepared via blending the as-prepared copolymer of lithiated 4, 4′-dicarboxyl bis(benzene sulfonyl)imide and 4,4′-diaminodiphenyl ether on the surface of lithium foil. This single-ion polymer artificial layer enables compact structure with unique continuous aggregated Li⁺ clusters, thus reducing the direct contact between lithium metal and electrolyte simultaneously, ensuring Li⁺ transport is fast and homogeneous. Based on which, the coulombic efficiency of the Li|Cu half-cell is effectively improved, and the cycle stability of the Li|Li symmetric cell can be prolonged from 160 h to 240 h. Surficial morphology and elemental valence analysis confirm that the bis(benzene sulfonyl)imide based single-ion polymer artificial layer effectively facilitates the Li⁺ uniform deposition and suppresses parasitic reactions between lithium metal anode and liquid electrolyte in the LFP|Li full-cell. This strategy provides a new perspective to achieve a steady lithium metal anode, which can be a promising candidate in practical applications. Full article

A novel anode consisting of a mixture of Cu powder and LiCl/Li₁₃In₃-coated Li powder was developed and tested for use in Li metal secondary batteries (LMSBs). The aim was to improve the electrochemical performance as suppress dendrite formation and volume change on the Li metal electrode. A LiCl/Li₁₃In₃ composite film was deposited on the surface of Li powder particles using a facile liquid treatment method. The coated Li powder was mixed with Cu powder to produce a Li–Cu composite electrode (LCE) for LMSBs. It has been proven through scanning electron microscopy (SEM) and analysis of the coating layer using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and depth profile analysis that LiCl/Li₁₃In₃ has formed well on the surface of the Li powder. The coated LCE exhibited improved electrochemical properties in both the symmetric cell and full cell tests. Through electrochemical impedance spectroscopy (EIS) measurement, it has been determined that after 50 cycles, the impedance of the coated LCE is 98 Ω. In particular, even when a large amount of Li was used (40%, 1544 mAh g⁻¹), it exhibited improved electrochemical behavior over 50 cycles in a symmetric cell test. In addition, in a full cell test with LiV₃O₈ as a cathode at a 2 C rate, the capacity retention was 96% after 50 cycles. SEM images showed that dendrite growth and volume change were suppressed by the novel electrode architecture. Full article

Lithium metal is one of the most attractive anode materials for rechargeable batteries. However, its high reactivity with electrolytes, huge volume change, and dendrite growth upon charge or discharge lead to a low CE and the cycle instability of batteries. Due to the low surface diffusion resistance, LiF is conducive to guiding Li⁺ deposition rapidly and is an ideal component for the surface coating of lithium metal. In the current study, a fluorinated layer was prepared on a lithium metal anode surface by means of chemical vapor deposition (CVD). In the carbonate-based electrolyte, smooth Li deposits were observed for these LiF-coated lithium anodes after cycling, providing excellent electrochemical stability for the lithium metal anode in the liquid organic electrolyte. The CE of Li|Cu batteries increases from 83% for pristine Li to 92% for LiF-coated ones. Moreover, LiF-Li|LFP exhibits a decent rate and cycling performance. After 120 cycles, the capacity retention of 99% at 1C is obtained, and the specific capacity is maintained above 149 mAh/g. Our investigation provides a simple and low-cost method to improve the performance of rechargeable Li-metal batteries. Full article

The anode-free lithium metal battery (AFLMB) is attractive for its ultimate high energy density. However, the poor cycling lifespan caused by the unstable anode interphase and the continuous Li consumption severely limits its practical application. Here, facile one-step heat treatment of the Cu foil current collectors before the cell assembly is proposed to improve the anode interphase during the cycling. After heat treatment of the Cu foil, homogeneous Li deposition is achieved during cycling because of the smoother surface morphology and enhanced lithiophilicity of the heat-treated Cu foil. In addition, Li₂O-riched SEI is obtained after the Li deposition due to the generated Cu₂O on the heat-treated Cu foil. The stable anode SEI can be successfully established and the Li consumption can be slowed down. Therefore, the cycling stability of the heat-treated Cu foil electrode is greatly improved in the Li|Cu half-cell and the symmetric cell. Moreover, the corresponding LFP|Cu anode-free full cell shows a much-improved capacity retention of 62% after 100 cycles, compared to that of 43% in the cell with the commercial Cu foil. This kind of facile but effective modification of current collectors can be directly applied in the anode-free batteries, which are assembled without Li pre-deposition on the anode. Full article

Current developments in medical technology have focused on therapeutic treatments that selectively and effectively address specific pathological areas, minimizing side effects on healthy tissues. In this regard, many procedures have been developed to provide non-invasive therapy, for example therapeutic ultrasound (US). In the medical field, in particular in cancer research, it has been observed how ultrasounds can cause cell death and inhibit cell proliferation of cancer cells, while preserving healthy ones with almost negligible side effects. Various studies have shown that low intensity pulse ultrasound (LIPUS) and low intensity continuous ultrasound (LICUS) regulate the proliferation, cell differentiation and cavitation phenomena. Nowadays, there are poorly known aspects of low intensity US treatment, in terms of biophysical and biomechanical effects on target cells. The aim of this study is to set up an innovative apparatus for US treatment of pancreatic ductal adenocarcinoma (PDAC) cells, monitoring parameters such as acoustic intensity, acoustic pressure, stimulation frequency and treatment protocol. To this purpose, we have developed a custom-made set up for the US stimulation at 1.2 and 3 MHz of tridimensional (3D) cultures of PDAC cells (PANC-1, Mia Paca-2 and BxPc3 cells). Images of the 3D cultures were acquired, and the Calcein/PI assay was applied to detect US-induced cell death. Overall, the setup we have presented paves the way to an innovative protocol for tumor treatment. The system can be used either alone or in combination with small molecules or recombinant antibodies in order to propose a novel combined therapeutic approach. Full article

This review presents thermoelectric phenomena in copper chalcogenides substituted with sodium and lithium alkali metals. The results for other modern thermoelectric materials are presented for comparison. The results of the study of the crystal structure and phase transitions in the ternary systems Na-Cu-S and Li-Cu-S are presented. The main synthesis methods of nanocrystalline copper chalcogenides and its alloys are presented, as well as electrical, thermodynamic, thermal, and thermoelectric properties and practical application. The features of mixed electron–ionic conductors are discussed. In particular, in semiconductor superionic copper chalcogenides, the presence of a “liquid-like phase” inside a “solid” lattice interferes with the normal propagation of phonons; therefore, superionic copper chalcogenides have low lattice thermal conductivity, and this is a favorable factor for the formation of high thermoelectric efficiency in them. Full article

Therapeutic ultrasound has been studied for over seven decades for different medical applications. The versatility of ultrasound applications are highly dependent on the frequency, intensity, duration, duty cycle, power, wavelength, and form. In this review article, we will focus on low-intensity continuous ultrasound (LICUS). LICUS has been well-studied for numerous clinical disorders, including tissue regeneration, pain management, neuromodulation, thrombosis, and cancer treatment. PubMed and Google Scholar databases were used to conduct a comprehensive review of all research studying the application of LICUS in pre-clinical and clinical studies. The review includes articles that specify intensity and duty cycle (continuous). Any studies that did not identify these parameters or used high-intensity and pulsed ultrasound were not included in the review. The literature review shows the vast implication of LICUS in many medical fields at the pre-clinical and clinical levels. Its applications depend on variables such as frequency, intensity, duration, and type of medical disorder. Overall, these studies show that LICUS has significant promise, but conflicting data remain regarding the parameters used, and further studies are required to fully realize the potential benefits of LICUS. Full article

In this paper, we investigate the problem of selective routing attack in wireless sensor networks by considering a novel threat, named the upstream-node effect, which limits the accuracy of the monitoring functions in deciding whether a monitored node is legitimate or malicious. To address this limitation, we propose a one-dimensional one-class classifier, named relaxed flow conservation constraint, as an intrusion detection scheme to counter the upstream node attack. Each node uses four types of relaxed flow conservation constraints to monitor all of its neighbors. Three constraints are applied by using one-hop knowledge, and the fourth one is calculated by monitoring two-hop information. The latter is obtained by proposing two-hop energy-efficient and secure reporting scheme. We theoretically analyze the security and performance of the proposed intrusion detection method. We also show the superiority of relaxed flow conservation constraint in defending against upstream node attack compared to other schemes. The simulation results show that the proposed intrusion detection system achieves good results in terms of detection effectiveness. Full article

The LiCu_xMn_1.95−xSi_0.05O₄ (x = 0, 0.02, 0.05, 0.08) samples have been obtained by a simple solid-state method. XRD and SEM characterization results indicate that the Cu-Si co-doped spinels retain the inherent structure of LiMn₂O₄ and possess uniform particle size distribution. Electrochemical tests show that the optimal Cu-doping amount produces an obvious improvement effect on the cycling stability of LiMn_1.95Si_0.05O₄. When cycled at 0.5 C, the optimal LiCu_0.05Mn_1.90Si_0.05O₄ sample exhibits an initial capacity of 127.3 mAh g⁻¹ with excellent retention of 95.7% after 200 cycles. Moreover, when the cycling rate climbs to 10 C, the LiCu_0.05Mn_1.90Si_0.05O₄ sample exhibits 82.3 mAh g⁻¹ with satisfactory cycling performance. In particular, when cycled at 55 °C, this co-doped sample can show an outstanding retention of 94.0% after 100 cycles, whiles the LiMn_1.95Si_0.05O₄ only exhibits low retention of 79.1%. Such impressive performance shows that the addition of copper ions in the Si-doped spinel effectively remedy the shortcomings of the single Si-doping strategy and the Cu-Si co-doped spinel can show excellent cycling stability. Full article

Skin lesions are a severe disease globally. Early detection of melanoma in dermoscopy images significantly increases the survival rate. However, the accurate recognition of melanoma is extremely challenging due to the following reasons: low contrast between lesions and skin, visual similarity between melanoma and non-melanoma lesions, etc. Hence, reliable automatic detection of skin tumors is very useful to increase the accuracy and efficiency of pathologists. In this paper, we proposed two deep learning methods to address three main tasks emerging in the area of skin lesion image processing, i.e., lesion segmentation (task 1), lesion dermoscopic feature extraction (task 2) and lesion classification (task 3). A deep learning framework consisting of two fully convolutional residual networks (FCRN) is proposed to simultaneously produce the segmentation result and the coarse classification result. A lesion index calculation unit (LICU) is developed to refine the coarse classification results by calculating the distance heat-map. A straight-forward CNN is proposed for the dermoscopic feature extraction task. The proposed deep learning frameworks were evaluated on the ISIC 2017 dataset. Experimental results show the promising accuracies of our frameworks, i.e., 0.753 for task 1, 0.848 for task 2 and 0.912 for task 3 were achieved. Full article