Search Results (51)

This study used Jilin-1 satellite data and unmanned aerial vehicle (UAV)-collected visible-thermal infrared imagery to calculate twelve spectral indices and evaluate their effectiveness in distinguishing post-fire forest areas and identifying human-altered land-cover changes in Jinyun Mountain, Chongqing. The research goals included mapping wildfire impacts with M-statistic separability, measuring land-cover distinguishability through Jeffries–Matusita (JM) distance analysis, classifying land-cover types using the random forest (RF) algorithm, and verifying classification accuracy. Cumulative human disturbances—such as land clearing, replanting, and road construction—significantly blocked the natural recovery of burn scars, and during long-term human-assisted recovery periods over one year, the Red Green Blue Index (RGBI), Green Leaf Index (GLI), and Excess Green Index (EXG) showed high classification accuracy for six land-cover types: road, bare soil, deadwood, bamboo, broadleaf, and grass. Key accuracy measures showed producer accuracy (PA) > 0.8, user accuracy (UA) > 0.8, overall accuracy (OA) > 90%, and a kappa coefficient > 0.85. Validation results confirmed that visible-spectrum indices are good at distinguishing photosynthetic vegetation, thermal bands help identify artificial surfaces, and combined thermal-visible indices solve spectral confusion in deadwood recognition. Spectral indices provide high-precision quantitative evidence for monitoring post-fire land-cover changes, especially under human intervention, thus offering important data support for time-based modeling of post-fire forest recovery and improvement of ecological restoration plans. Full article

The stray light suppression design aims to reduce the impact of stray light on optical systems. For high-resolution optical remote sensing systems, practical tests of stray light suppression performance are essential to ensure optimal functionality. However, due to system complexity and spatial constraints, physical test methods for evaluating the stray light suppression performance of large-aperture, long-focal-length remote sensing cameras remain scarce. To address this issue, a comprehensive test is conducted on the stray light suppression performance of the Jilin-1 GF04A satellite remote sensing camera by integrating multiple test methods, including the environmental light effect test, neighborhood point source response test, key surface response test, and sneak path of stray light test. The experimental results indicate that the stray light response ratios obtained from different test methods are all below 1%. The on-orbit performance of GF04A further validates the effectiveness of its stray light suppression design. Full article

We incorporated a comprehensive dataset encompassing recent measurements from satellites such as the Macau Science Satgellite-1 (MSS-1), Swarm, and CHAMP, as well as aero and ocean magnetic measurements, alongside ground-based data from 1936 to 2000. This amalgamation is the basis for constructing a lithospheric magnetic field model of the Chinese mainland, employing the three-dimensional Surface Spline (3DSS) model. Additionally, we used the World Digital Magnetic Anomaly Map (WDMAM)-2.1 and CHAOS-7.13 models to address data gaps horizontally and vertically. To evaluate the efficacy of the new model, we compared it not only with established models such as SHA1050, NGDC720, and LCS-1 but also with the new model excluding the MSS-1 data. The results show a high agreement between the 3DSS model and other global models at a spatial resolution of 0.05°. Furthermore, we inspected the rapid variations in the magnetic field with increasing altitude, demonstrating a smooth transition across the altitudes covered by the three satellites. Error analyses reflected the importance of MSS-1 data, which contributed notably to modelling by capturing finer-scale magnetic structures. The increased data availability correlated positively with the model’s accuracy, as evidenced by the Root Mean Square Error (RMSE), registering an optimal value of 0.02 nT. The new model reveals additional geological details in southern Tibet, northeastern Inner Mongolia, and the adjacent areas of Liaoning and Jilin provinces, which are not discernible in other global models. The relationship between these anomalies and heat flow in northeastern China appears less evident, suggesting a complex interplay of orogenic processes and surface mineralogy in shaping these magnetic signatures. Full article

Wind power plays a pivotal role in the achievement of carbon peaking and carbon neutrality. Extensive evidence has demonstrated that there are adverse impacts of wind power expansion on natural ecosystems, particularly on forests, such as forest degradation and habitat loss. However, incomplete and outdated information regarding onshore wind turbines in China hinders further systematic and in-depth studies. To address this challenge, we compiled a geospatial dataset of wind turbines located in forest areas of China as of 2022 to enhance data coverage from publicly available sources. Utilizing the YOLOv10 framework and high-resolution Jilin-1 optical satellite images, we identified the coordinates of 63,055 wind turbines, with an F1 score of 97.64%. Our analysis indicated that a total of 16,173 wind turbines were situated in forests, primarily within deciduous broadleaved forests (44.17%) and evergreen broadleaved forests (31.82%). Furthermore, our results revealed significant gaps in data completeness and balance in publicly available datasets, with 48.21% of the data missing and coverage varying spatially from 28.96% to 74.36%. The geospatial dataset offers valuable insights into the distribution characteristics of wind turbines in China and could serve as a foundation for future studies. Full article

The accurate perception and prediction of traffic parameters like vehicles is essential to transportation land planning and management. Video satellites launched in recent years have brought promising opportunities into this field, providing a wide perspective and high frame frequency for extracting moving vehicles. However, detecting moving vehicles remains a challenge due to their small size, which diminishes shape and texture details, often causing them to blend with noise or other objects. To address this issue, we propose an effective method for moving vehicle detection in video satellites by integrating road maps. Experiments conducted on videos sampled from Jilin-1 and Skysat satellites show that our approach achieves F-scores of 0.98 and 0.87, respectively, which are superior to the three traditional methods, Gaussian mixture model (GMM), improved frame difference (IFD), and visual background extractor (ViBe). Our method can be used for accurate parameter estimation in real traffic, which paves the way for the application of video satellites in transportation land planning and management. Full article

To address the challenges of missed detections caused by insufficient shape and texture features and blurred boundaries in existing detection methods, this paper introduces a novel moving vehicle detection approach for satellite videos. The proposed method leverages frame difference and convolution to effectively integrate spatiotemporal information. First, a frame difference module (FDM) is designed, combining frame difference and convolution. This module extracts motion features between adjacent frames using frame difference, refines them through backpropagation in the neural network, and integrates them with the current frame to compensate for the missing motion features in single-frame images. Next, the initial features are processed by a backbone network to further extract spatiotemporal feature information. The neck incorporates deformable convolution, which adaptively adjusts convolution kernel sampling positions, optimizing feature representation and enabling effective multiscale information integration. Additionally, shallow large-scale feature maps, which use smaller receptive fields to focus on small targets and reduce background interference, are fed into the detection head. To enhance small-target feature representation, a small-target self-reconstruction module (SR-TOD) is introduced between the neck and the detection head. Experiments using the Jilin-1 satellite video dataset demonstrate that the proposed method outperforms comparison models, significantly reducing missed detections caused by weak color and texture features and blurred boundaries. For the satellite-video moving vehicle detection task, this method achieves notable improvements, with an average F1-score increase of 3.9% and a per-frame processing speed enhancement of 7 s compared to the next best model, DSFNet. Full article

Vegetation indices, especially the normalized difference vegetation index (NDVI), are widely used in urban vegetation assessments. However, estimating the vegetation abundance in urban scenes using the NDVI has constraints due to the complex spectral signature related to the urban structure, materials and other factors compared to natural ground surfaces. This paper employs the 3D discrete anisotropic radiative transfer (DART) model to simulate the spectro-directional reflectance of synthetic urban scenes with various urban geometries and building materials using a flux-tracking method under shaded and sunlit conditions. The NDVI is calculated using the spectral radiance in the red (0.6545 μm) and near-infrared bands (0.865 μm). The effects of the urban material heterogeneity and 3D structure on the NDVI, and the performance of three NDVI-based fractional vegetation cover (FVC) inversion algorithms, are evaluated. The results show that the effects of the building material heterogeneity on the NDVI are negligible under sunlit conditions but not negligible under shaded conditions. The NDVI value of building components within synthetic scenes is approximately zero. The shaded road exhibits a higher NDVI value in comparison to the illuminated road because of scattering from adjacent pixels. In order to correct the effects of scattering caused by building geometry, the reflectance of the Landsat 8/OLI image is corrected using the sky view factor (SVF) and then used to calculate the FVC. Jilin-1 satellite images with high spatial resolution (0.5 m) are used to extract the vegetation cover and then aggregated to 30 m spatial resolution to calculate the FVC for validation. The results show that the RMSE is up to 0.050 after correction, while the RMSE is 0.169 before correction. This study makes a contribution to the understanding of the effects of the urban 3D structure and material reflectance on the NDVI and provides insights into the retrieval of the FVC in different urban scenes. Full article

Body-mounted solar panels are extensively utilized in satellite construction due to their simple structure and robust vibration resistance. The quantity and arrangement of support points on the body-mounted solar panel significantly affect its natural frequency. Thus, the design of these support points is a crucial aspect of the design process for body-mounted solar panels. This study presents a method for determining the support points of body-mounted solar panels, enabling rapid and precise identification of the quantity and positioning of these points based on the stated natural frequency in the design. First, a new algorithm is proposed, based on the finite element method, to optimize the positioning of support points on the body-mounted solar panel without the need for remeshing. Utilizing this algorithm, the distinct impacts of support point positioning and stiffness on the natural frequency of the solar panel are investigated, and the practical principles are proposed for quickly and accurately identifying the optimal locations of support points to maximize the natural frequency of the solar panel, given a predetermined number of support points. Subsequently, based on Courant–Fischer’s theorem, a method to ascertain the least quantity of support points through two modal analyses is presented. By integrating the aforementioned principles and method, a two-step procedure for identifying the quantity and positioning of support points is developed. Ultimately, the proposed two-step procedure is implemented in the design of the solar panel of the Jilin-1XXX satellite. The modal test reveals that the natural frequency of the solar panel surpasses the design index criteria, hence validating the efficacy and feasibility of the optimal design technique for the support points of the body-mounted solar panel presented in this study. Full article

Color distortion is a common issue in Jilin-1 KF01 series satellite imagery, a phenomenon caused by the instability of the sensor during the imaging process. In this paper, we propose a data-driven method to correct color distortion in Jilin-1 KF01 imagery. Our method involves three key aspects: color-distortion simulation, model design, and post-processing refinement. First, we investigate the causes of color distortion and propose algorithms to simulate this phenomenon. By superimposing simulated color-distortion patterns onto clean images, we construct color-distortion datasets comprising a large number of paired images (distorted–clean) for model training. Next, we analyze the principles behind a denoising model and explore its feasibility for color-distortion correction. Based on this analysis, we train the denoising model from scratch using the color-distortion datasets and successfully adapt it to the task of color-distortion correction in Jilin-1 KF01 imagery. Finally, we propose a novel post-processing algorithm to remove boundary artifacts caused by block-wise image processing, ensuring consistency and quality across the entire image. Experimental results show that the proposed method significantly eliminates color distortion and enhances the radiometric quality of Jilin-1 KF01 series satellite imagery, offering a solution for improving its usability in remote sensing applications. Full article

The problem is that existing aircraft detection datasets rarely simultaneously consider the diversity of target features and the complexity of environmental factors, which has become an important factor restricting the effectiveness and reliability of aircraft detection algorithms. Although a large amount of research has been devoted to breaking through few-sample-driven aircraft detection technology, most algorithms still struggle to effectively solve the problems of missed target detection and false alarms caused by numerous environmental interferences in bird-eye optical remote sensing scenes. To further aircraft detection research, we have established a new dataset, Aircraft Detection in Complex Optical Scene (ADCOS), sourced from various platforms including Google Earth, Microsoft Map, Worldview-3, Pleiades, Ikonos, Orbview-3, and Jilin-1 satellites. It integrates 3903 meticulously chosen images of over 400 famous airports worldwide, containing 33,831 annotated instances employing the oriented bounding box (OBB) format. Notably, this dataset encompasses a wide range of various targets characteristics including multi-scale, multi-direction, multi-type, multi-state, and dense arrangement, along with complex relationships between targets and backgrounds like cluttered backgrounds, low contrast, shadows, and occlusion interference conditions. Furthermore, we evaluated nine representative detection algorithms on the ADCOS dataset, establishing a performance benchmark for subsequent algorithm optimization. The latest dataset will soon be available on the Github website. Full article

The optical remote sensors carried by the Jilin-1 KF02 series satellites have an imaging resolution better than 0.5 m and a width of 150 km. There are radiometric problems, such as stripe noise, vignetting, and inter-slice chromatic aberration, in their raw images. In this paper, a relative radiometric correction method based on temperature normalization is proposed for the response characteristics of sensors and the structural characteristics of optical splicing of Jilin-1 KF02 series satellites cameras. Firstly, a model of temperature effect on sensor output is established to correct the variation of sensor response output digital number (DN) caused by temperature variation during imaging process, and the image is normalized to a uniform temperature reference. Then, the horizontal stripe noise of the image is eliminated by using the sensor scan line and dark pixel information, and the vertical stripe noise of the image is eliminated by using the method of on-orbit histogram statistics. Finally, the method of superposition compensation is used to correct the vignetting area at the edge of the image due to the lack of energy information received by the sensor so as to ensure the consistency of the image in color and image quality. The proposed method is verified by Jilin-1 KF02A on-orbit images. Experimental results show that the image response is uniform, the color is consistent, the average Streak Metrics (SM) is better than 0.1%, Root-Mean-Square Deviation of the Mean Line (RA) and Generalized Noise (GN) are better than 2%, Relative Average Spectral Error (RASE) and Relative Average Spectral Error (ERGAS) are greatly improved, which are better than 5% and 13, respectively, and the relative radiation quality is obviously improved after relative radiation correction. Full article

On-orbit geometric calibration is key to improving the geometric positioning accuracy of high-resolution optical remote sensing satellite data. Grouped calibration with geometric consistency (GCGC) is proposed in this paper for the Jilin1-KF01B satellite, which is the world’s first satellite capable of providing 150-km swath width and 0.5-m resolution data. To ensure the geometric accuracy of high-resolution image data, the GCGC method conducts grouped calibration of the time delay integration charge-coupled device (TDI CCD). Each group independently calibrates the exterior orientation elements to address the multi-time synchronization issues between imaging processing system (IPS). An additional inter-chip geometric positioning consistency constraint is used to enhance geometric positioning consistency in the overlapping areas between adjacent CCDs. By combining image simulation techniques associated with spectral bands, the calibrated panchromatic data are used to generate simulated multispectral reference band image as control data, thereby enhancing the geometric alignment consistency between panchromatic and multispectral data. Experimental results show that the average seamless stitching accuracy of the basic products after calibration is better than 0.6 pixels, the positioning accuracy without ground control points(GCPs) is better than 20 m, the band-to-band registration accuracy is better than 0.3 pixels, the average geometric alignment consistency between panchromatic and multispectral data are better than 0.25 multispectral pixels, the geometric accuracy with GCPs is better than 2.1 m, and the geometric alignment consistency accuracy of multi-temporal data are better than 2 m. The GCGC method significantly improves the quality of image data from the Jilin1-KF01B satellite and provide important references and practical experience for the geometric calibration of other large-swath high-resolution remote sensing satellites. Full article

In this study, we propose a practical and efficient scheme for ship detection in remote sensing imagery. Our method is developed using both ship body detection and ship wake detection and combines deep learning and feature-based image processing. A deep convolutional neural network is used to achieve ship body detection, and a feature-based processing method is proposed to detect ship wakes. For better analysis, we model the sea region and evaluate the quality of the image. Generally, the wake detection result is used to assist ship detection and obtain the sailing direction. Conventional methods cannot detect ships that are covered by clouds or outside the image boundary. The method proposed in this paper uses the wake to detect such ships, with a certain level of confidence and low false alarm probability in detection. Practical aspects such as the method’s applicability and time efficiency are considered in our method for real applications. We demonstrate the effectiveness of our method in a real remote sensing dataset. The results show that over 93.5% of ships and over 70% of targets with no visible ship body can be successfully detected. This illustrates that the proposed detection framework can fill the gap regarding the detection of sailing ships in a remote sensing image. Full article

Fugitive dust is an important source of total suspended particulate matter in urban ambient air. The existing segmentation methods for dust sources face challenges in distinguishing key and secondary features, and they exhibit poor segmentation at the image edge. To address these issues, this paper proposes the Dust Source U-Net (DSU-Net), enhancing the U-Net model by incorporating VGG16 for feature extraction, and integrating the shuffle attention module into the jump connection branch to enhance feature acquisition. Furthermore, we combine Dice Loss, Focal Loss, and Activate Boundary Loss to improve the boundary extraction accuracy and reduce the loss oscillation. To evaluate the effectiveness of our model, we selected Jingmen City, Jingzhou City, and Yichang City in Hubei Province as the experimental area and established two dust source datasets from 0.5 m high-resolution remote sensing imagery acquired by the Jilin-1 satellite. Our created datasets include dataset HDSD-A for dust source segmentation and dataset HDSD-B for distinguishing the dust control measures. Comparative analyses of our proposed model with other typical segmentation models demonstrated that our proposed DSU-Net has the best detection performance, achieving a mIoU of 93% on dataset HDSD-A and 92% on dataset HDSD-B. In addition, we verified that it can be successfully applied to detect dust sources in urban areas. Full article

On-orbit absolute radiometric calibration is not only a prerequisite for the quantitative application of optical remote sensing satellite data but also a key step in ensuring the accuracy and reliability of satellite observation data. Due to the diversity of imaging conditions for optical remote sensing satellite sensors, on-orbit absolute radiometric calibration usually requires a large number of imaging tasks and manual labor to calibrate each imaging condition. This seriously limits the timeliness of on-orbit absolute radiometric calibration and is also an urgent problem to be solved in the context of the explosive growth of satellite numbers. Based on this, we propose a general on-orbit absolute radiometric calibration method compatible with multiple imaging conditions. Firstly, we use a large amount of laboratory radiometric calibration data to explore the mathematical relationship between imaging conditions (row transfer time, integration level and gain), radiance, and DN, and successfully build an imaging condition compatibility model. Secondly, we combine the imaging condition compatibility model with cross calibration to achieve a general on-orbit absolute radiometric calibration method. We use cross calibration to obtain the reference radiance and corresponding DN of the target satellites, which calculates the general coefficient by using row transfer time, integration level, and gain, and use the general coefficient to calibrate all imaging conditions. Finally, we use multiple imaging tasks of the JL1GF03D11 satellites to verify the effectiveness of the proposed method. The experiments show that the average relative difference was reduced to 2.79% and the RMSE was reduced to 1.51, compared with the laboratory radiometric calibration method. In addition, we also verify the generality of the proposed method by using 10 satellites of the Jilin-1 GF03D series. The experiment shows that the goodness of fit of the general coefficient is all greater than 95%, and the average relative difference between the reference radiance and the calibrated radiance of the proposed method is 2.46%, with an RMSE of 1.67. To sum up, by using the proposed method, all imaging conditions of optical remote sensing satellite sensor can be calibrated in one imaging task, which greatly improves the timeliness and accuracy of on-orbit absolute radiometric calibration. Full article