Search Results (14)

A 12-membered pyridinophane scaffold containing two pyridine and two tertiary amine residues is examined as a prototype ligand (^tBuN4) for supporting nitrene transfer to olefins. The known [(^tBuN4)M^II(MeCN)₂]²⁺ (M = Mn, Fe, Co, and Ni) and [(^tBuN4)Cu^I(MeCN)]⁺ cations are synthesized with the hexafluorophosphate counteranion. The aziridination of para-substituted styrenes with PhI=NTs (Ts = tosyl) in various solvents proved to be high yielding for the Cu(I) and Cu(II) reagents, in contrast to the modest efficacy of all other metals. For α-substituted styrenes, aziridination is accompanied by products of aziridine ring opening, especially in chlorinated solvents. Bulkier β-substituted styrenes reduce product yields, largely for the Cu(II) reagent. Aromatic olefins are more reactive than aliphatic congeners by a significant margin. Mechanistic studies (Hammett plots, KIE, and stereochemical scrambling) suggest that both copper reagents operate via sequential formation of two N–C bonds during the aziridination of styrene, but with differential mechanistic parameters, pointing towards two distinct catalytic manifolds. Computational studies indicate that the putative copper nitrenes derived from Cu(I) and Cu(II) are each associated with closely spaced dual spin states, featuring high spin densities on the nitrene N atom. The computed electrophilicity of the Cu(I)-derived nitrene reflects the faster operation of the Cu(I) manifold. Full article

A series of modified tetraphenylporphyrins varying only in the electron-donating or electron-withdrawing character of the substituents in the para-phenyl position have been blended into the active layer of MEH-PPV:PCBM bulk heterojunction solar cells. Increasing the electron-withdrawing ability of the substituents, as quantified by the Hammett constant, systematically alters the device efficiency of ternary poly[2-methoxy-5-(2′-ethylhexyloxy)-1,4-phenylenevinylene]:porphyrin:[6,6]-phenylC61-butyric acid methyl ester (MEH-PPV:porphyrin:PCBM) bulk heterojunction organic solar cells through alteration of the HOMO/LUMO levels and, thereby, the open-circuit voltage of the cell. We show that the porphyrin concentrates at the MEH-PPV:PCBM interface in these blends and that the devices operate via a cascade mechanism when the highest occupied molecular orbital (HOMO) of the porphyrin is higher in energy that that of MEH-PPV, but via a parallel/alloy device mechanism, when the HOMO of the porphyrin is lower in energy than that of MEH-PPV. As such, this work highlights how the energetics of the ternary component can determine device performance by switching between charge generation models simply by altering the electron-withdrawing character of the porphyrin ternary additive. Full article

Iodosilarene derivatives (PhIO, PhI(OAc)₂) constitute an important class of oxygen atom transfer reagents in organic synthesis and are often used together with iron-based catalysts. Since the factors controlling the ability of iron centers to catalyze alkane hydroxylation are not yet fully understood, the aim of this report is to develop bioinspired non-heme iron catalysts in combination with PhI(OAc)₂, which are suitable for performing C-H activation. Overall, this study provides insight into the iron-based ([Fe^II(PBI)₃(CF₃SO₃)₂] (1), where PBI = 2-(2-pyridyl)benzimidazole) catalytic and stoichiometric hydroxylation of triphenylmethane using PhI(OAc)₂, highlighting the importance of reaction conditions including the effect of the co-ligands (para-substituted pyridines) and oxidants (para-substituted iodosylbenzene diacetates) on product yields and reaction kinetics. A number of mechanistic studies have been carried out on the mechanism of triphenylmethane hydroxylation, including C-H activation, supporting the reactive intermediate, and investigating the effects of equatorial co-ligands and coordinated oxidants. Strong evidence for the electrophilic nature of the reaction was observed based on competitive experiments, which included a Hammett correlation between the relative reaction rate (logk_rel) and the σ_p (4R-Py and 4R’-PhI(OAc)₂) parameters in both stoichiometric (ρ = +0.87 and +0.92) and catalytic (ρ = +0.97 and +0.77) reactions. The presence of [(PBI)₂(4R-Py)Fe^IIIOIPh-4R’]³⁺ intermediates, as well as the effect of co-ligands and coordinated oxidants, was supported by their spectral (UV–visible) and redox properties. It has been proven that the electrophilic nature of iron(III)-iodozilarene complexes is crucial in the oxidation reaction of triphenylmethane. The hydroxylation rates showed a linear correlation with the Fe^III/Fe^II redox potentials (in the range of −350 mV and −524 mV), which suggests that the Lewis acidity and redox properties of the metal centers greatly influence the reactivity of the reactive intermediates. Full article

In this study, a library of 3,7-di(hetero)aryl-substituted 10-(3-trimethylammoniumpropyl)10H-phenothiazine salts is prepared. These title compounds and their precursors are reversible redox systems with tunable potentials. The Hammett correlation gives a very good correlation of the first oxidation potentials with σ_p parameters. Furthermore, the title compounds and their precursors are blue to green-blue emissive. Screening of the salts reveals for some derivatives a distinct inhibition of several pathogenic bacterial strains (Mycobacterium tuberculosis, Staphylococcus aureus, Escherichia coli, Aconetobacter baumannii, and Klebsiella pneumoniae) in the lower micromolar range. Full article

The racemization of biomolecules in the active site can reduce the biological activity of drugs, and the mechanism involved in this process is still not fully comprehended. The present study investigates the impact of aromaticity on racemization using advanced theoretical techniques based on density functional theory. Calculations were performed at the ωb97xd/6-311++g(d,p) level of theory. A compelling explanation for the observed aromatic stabilization via resonance is put forward, involving a carbanion intermediate. The analysis, employing Hammett’s parameters, convincingly supports the presence of a negative charge within the transition state of aromatic compounds. Moreover, the combined utilization of natural bond orbital (NBO) analysis and intrinsic reaction coordinate (IRC) calculations confirms the pronounced stabilization of electron distribution within the carbanion intermediate. To enhance our understanding of the racemization process, a thorough examination of the evolution of NBO charges and Wiberg bond indices (WBIs) at all points along the IRC profile is performed. This approach offers valuable insights into the synchronicity parameters governing the racemization reactions. Full article

In this manuscript substituent effects in several silicon tetrel bonding (TtB) complexes were investigated at the RI-MP2/def2-TZVP level of theory. Particularly, we have analysed how the interaction energy is influenced by the electronic nature of the substituent in both donor and acceptor moieties. To achieve that, several tetrafluorophenyl silane derivatives have been substituted at the meta and para positions by several electron donating and electron withdrawing groups (EDG and EWG, respectively), such as –NH₂, –OCH₃, –CH₃, –H, –CF₃ and –CN substituents. As electron donor molecules, we have used a series of hydrogen cyanide derivatives using the same EDGs and EWGs. We have obtained the Hammett’s plots for different combinations of donors and acceptors and in all cases we have obtained good regression plots (interaction energies vs. Hammet’s σ parameter). In addition, we have used the electrostatic potential (ESP) surface analysis as well as the Bader’s theory of atoms in molecules (AIM) and noncovalent interaction plot (NCI plot) techniques to further characterize the TtBs studied herein. Finally, a Cambridge Structural Database (CSD) inspection was carried out, retrieving several structures where halogenated aromatic silanes participate in tetrel bonding interactions, being an additional stabilization force of their supramolecular architectures. Full article

Azobenzene/tetraethyl ammonium photochromic ligands (ATPLs) are photoactive compounds with a large variety of photopharmacological applications such as nociception control or vision restoration. Absorption band maximum and lifetime of the less stable isomer are important characteristics that determine the applicability of ATPLs. Substituents allow to adjust these characteristics in a range limited by the azobenzene/tetraethyl ammonium scaffold. The aim of the current study is to find the scope and limitations for the design of ATPLs with specific spectral and kinetic properties by introducing para substituents with different electronic effects. To perform this task we synthesized ATPLs with various electron acceptor and electron donor functional groups and studied their spectral and kinetic properties using flash photolysis and conventional spectroscopy techniques as well as quantum chemical modeling. As a result, we obtained diagrams that describe correlations between spectral and kinetic properties of ATPLs (absorption maxima of E and Z isomers of ATPLs, the thermal lifetime of their Z form) and both the electronic effect of substituents described by Hammett constants and structural parameters obtained from quantum chemical calculations. The provided results can be used for the design of ATPLs with properties that are optimal for photopharmacological applications. Full article

Chitin is an effective sorbent which can be used in environmental monitoring, beyond obvious applications in withholding metal-containing pollutants from wastewater- or nuclear fuel reprocessing flows, since background levels in (purified) chitin are very low except for a few metals (Fe, Cu, Al, Ti, and Zn). Since retention of M^x+ and their complexes on chitin depend on an oxidation state, and to a lesser extent the presence of possible ligands or co-ligands, partition between chitin samples exposed to sediment and those exposed to water can be changed by environmental factors such as local biota producing or absorbing/metabolizing effective ligands such as citrate or oxalate and by changes of redox potential. Thermodynamics are studied via log P, using calibration functions log P vs. 1/r or log P vs. Σσ (sum of Hammett parameters of ligand donor groups) for di- and trivalent elements not involved in biochemical activity (not even indirectly) and thus measuring “deviations” from expected values. These “deviations” can be due to input as a pollutant, biochemical use of certain elements, precipitation or (bio-induced reduction of SO₄²⁻ or CO₂) dissolution of solids in sediment. Biochemical processes which occur deep in sediment can be detected due to this effect. Data from grafted chitin (saturation within ≤ 10 min) and from outer surfaces of arthropods caught at the same site do agree well. Log P is more telling than total amounts retrieved. Future applications of these features of chitin are outlined. Full article

The chloride-chloride exchange reaction in arenesulfonyl chlorides was investigated experimentally and theoretically by density functional theory (DFT) calculations. The second order rate constants and activation parameters of this identity reaction were determined for 22 variously substituted arenesulfonyl chlorides using radio-labeled Et₄N³⁶Cl. The chloride exchange rates of 11 sulfonyl chlorides bearing para-and meta-substituents (σ constants from −0.66 to +0.43) in the aromatic ring followed the Hammett equation with a ρ-value of +2.02. The mono- and di-ortho-alkyl substituted sulfonyl chlorides exhibit an enhanced reactivity although both inductive and steric effects lower the reaction rate. The DFT calculations of their structures together with X-ray data showed that an increased reactivity is mainly due to a peculiar, rigid, strongly compressed and sterically congested structure. The DFT studies of the title reaction revealed that it proceeds via a single transition state according to the S_N2 mechanism. The analogous fluoride exchange reaction occurs according to the addition–elimination mechanism (A–E) and formation of a difluorosulfurandioxide intermediate. The reliability of the calculations performed was supported by the fact that the calculated relative rate constants and activation parameters correlate well with the experimental kinetic data. Full article

Experimental data on the affinity of various substances to albumin are essential for the development of empirical models to predict plasma binding of drug candidates. Binding of 24 substituted benzoic acid anions to bovine serum albumin was studied using spectrofluorimetric titration. The equilibrium constants of binding at 298 K were determined according to 1:1 complex formation model. The relationships between the ligand structure and albumin affinity are analyzed. The binding constant values for m- and p-monosubstituted acids show a good correlation with the Hammett constants of substituents. Two- and three-parameter quantitative structure–activity relationship (QSAR) models with theoretical molecular descriptors are able to satisfactorily describe the obtained values for the whole set of acids. It is shown that the electron-density distribution in the aromatic ring exerts crucial influence on the albumin affinity. Full article

The present work incorporates the synthesis of a multifunctional catalyst for the transesterification of waste cooking oil (WCO) to biodiesel and recovery of rare earth elements (REEs). For this purpose, TiO₂ nanoparticles and TiO₂ doped with lithium ions were prepared. The influence of lithium ions on the catalytic performance of TiO₂ was attained by impregnation of the different molar ratios of lithium hydroxide to bare TiO₂. Then each catalyst was screened for catalytic conversion of WCO to fatty acid methyl ester (FAME) and also for REEs recovery. All synthesized materials were characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD), Transmission electron microscopy (TEM), Brunauer–Emmett–Teller (BET) analysis, and Hammett indicator for the basicity test. The obtained biodiesel was characterized by gas chromatography with mass spectrometry (GC-MS), ¹H, and ¹³C nuclear magnetic resonance (NMR). Moreover, the physical parameters of the synthesized biodiesel were also determined. The REEs recovery efficiency of synthesized nanomaterials was investigated, and the percentage of REEs removal was determined by inductively-coupled plasma optical emission spectroscopy (ICP-OES). Full article

A Schiff base supramolecular 4-[(4-(hexyloxy)phenylimino)methyl]benzoic acid and a new series of Schiff base/ester linkages named 4-substitutedphenyl 4-[(4-(hexyloxy)phenylimino)methyl]benzoate liquid crystals were synthesized. The thermal stability, mesomorphic, and optical behavior of the prepared compounds were characterized by differential scanning calorimetry (DSC), Thermogravemetric analysis (TGA), polarized optical microscopy (POM), and UV spectroscopy. FT-IR, ¹H-NMR, ¹³C-NMR, and elemental analyses were carried out to elucidate and confirm the molecular structures of the synthesized compounds. The investigated series comprising different sized terminal polar groups changed between CH(CH₃)₂, H, I, and F. It was found that the supramolecular imino acid dimer is enantiotropic dimorphic, with a wide SmA phase and a good N phase range. The other series of terminally substituted Schiff base/esters are mesomorphic with a high thermal stable SmA phase, except the iodo derivative, which showed dimorphic SmA and N phases. The effect of the position and the orientation of the cores, as well as the terminal substituent of the type and the stability of the mesophase, were studied. A computational theoretical study of the effects of the van der Waal’s volume, the Hammett substituent coefficient, the inductive sigma constant, and other geometrical parameters were discussed. The study revealed that the planarity of the two phenyl rings attached with an imino linking group impacted the resonance effect of the terminal substituents rather than their inductive effect. A detailed study on the effect of the estimated thermal parameters, as well as their geometrical planarity with the type and stability of the formed mesophase, was discussed. Full article

Quantum chemical descriptors and empirical parameters are two different types of chemical parameters that play the fundamental roles in chemical reactivity and model development. However, previous studies have lacked detail regarding the relationship between quantum chemical descriptors and empirical constants. We selected polychlorinated biphenyls (PCBs) as an object to investigate the intrinsic correlation between 16 quantum chemical descriptors and Hammett constants. The results exhibited extremely high linearity for $\sum {\sigma }_{\mathrm{o},\mathrm{m},\mathrm{p}}^{+}$ with Q_xx/yy/zz, α and E_HOMO based on the meta-position grouping. Polychlorinated dibenzodioxins (PCDDs) and polychlorinated naphthalenes (PCNs) congeners, as two independent compounds, validated the reliability of the relationship. The meta-substituent grouping method between $\sum {\sigma }_{\mathrm{o},\mathrm{m},\mathrm{p}}^{+}$ and α was successfully used to predict the rate constant (k) for ^•OH oxidation of PCBs, as well as the octanol/water partition coefficient (logK_OW) and aqueous solubility (−logS_W) of PCDDs, and exhibited excellent agreement with experimental measurements. Revealing the intrinsic correlation underlying the empirical constant and quantum chemical descriptors can develop simpler and higher efficient model application in predicting the environmental behavior and chemical properties of compounds. Full article

In this manuscript, we combined ab initio calculations (RI-MP2/def2-TZVPD level of theory) and a search in the CSD (Cambridge Structural Database) to analyze the influence of aromatic substitution in charge-assisted multivalent halogen bonding complexes. We used a series of benzene substituted iodine derivatives C₆H₄(IF₄)Y (Y = H, NH₂, OCH₃, F, CN, and CF₃) as Lewis acids and used Cl⁻ as electron rich interacting atoms. We have represented the Hammett’s plot and observed a good regression coefficient (interaction energies vs. Hammett’s σ parameter). Additionally, we demonstrated the direct correlation between the Hammett’s σ parameter and the value of molecular electrostatic potential measured at the I atom on the extension of the C–I bond. Furthermore, we have carried out AIM (atoms in molecules) and NBO (natural bonding orbital) analyses to further describe and characterize the interactions described herein. Finally, we have carried out a search in the CSD (Cambridge Structural Database) and found several X-ray structures where these interactions are present, thus giving reliability to the results derived from the calculations. Full article