Search Results (794)

In this research project a large linear electromagnetic actuator (LLEA) was designed and manufactured. The electromagnetic performance was published in previous works, but in this paper we focus on the technological challenges related to the manufacturing in particular. This LLEA was based on the magnet-free switched-reluctance principle, having six effective energised stator “teeth” and four passive mover parts (4:6 ratio). Various aspects and challenges encountered during the manufacturing, transport, and assembly are discussed. Thermal expansion of steel contributed to the decision of the modular design, with each module having 1.3 m in length, with a 2 mm longitudinal dilatation gap. The initial prototype was tested with a 10.6 m length, with plans to extend the test track to 60 m, which was fully achievable due to the modular design and required 29 tons of electrical steel to be built. The stator laminations were cut by a bespoke progressive tool with stamping, and other parts by a CO₂ laser. Mounting was based on welding (back of the stator) and clamping plates (through insulated bolts). The linear longitudinal force was on the order of 8 kN, with the main air gap of 7.5–10 mm on either side of the mover. The lateral forces could exceed 40 kN and were supported by appropriate construction steel members bolted to the concrete floor. The overall mechanical tolerances after installation remained below 0.5 mm. The technology used for constructing this prototype demonstrated the cost-effective way for a semi-industrial manufacturing scale. Full article

The focal “hot spot” neuropathologies in COVID-19 infection are revealing footprints of a hidden underlying collapse of a novel ultrafast ultradian Piezo2 signaling system within the nervous system. Paradoxically, the same initiating pathophysiology may underpin the systemic findings in COVID-19 infection, namely the multiorgan SARS-CoV-2 infection-induced vascular pathologies and brain–body-wide systemic pro-inflammatory signaling, depending on the concentration and exposure to infecting SARS-CoV-2 viruses. This common initiating microdamage is suggested to be the primary damage or the acquired channelopathy of the Piezo2 ion channel, leading to a principal gateway to pathophysiology. This Piezo2 channelopathy-induced neural switch could not only explain the initiation of disrupted cell–cell interactions, metabolic failure, microglial dysfunction, mitochondrial injury, glutamatergic synapse loss, inflammation and neurological states with the central involvement of the hippocampus and the medulla, but also the initiating pathophysiology without SARS-CoV-2 viral intracellular entry into neurons as well. Therefore, the impairment of the proposed Piezo2-induced quantum mechanical free-energy-stimulated ultrafast proton-coupled tunneling seems to be the principal and critical underlying COVID-19 infection-induced primary damage along the brain axes, depending on the loci of SARS-CoV-2 viral infection and intracellular entry. Moreover, this initiating Piezo2 channelopathy may also explain resultant autonomic dysregulation involving the medulla, hippocampus and heart rate regulation, not to mention sleep disturbance with altered rapid eye movement sleep and cognitive deficit in the short term, and even as a consequence of long COVID. The current opinion piece aims to promote future angles of science and research in order to further elucidate the not entirely known initiating pathophysiology of SARS-CoV-2 infection. Full article

The maritime sector is undergoing rapid transformation, driven by increasingly stringent international regulations targeting air pollution. While newly built vessels integrate advanced technologies for compliance, the global fleet averages 21.8 years of age and must meet emission requirements through retrofitting or operational changes. This study evaluates, at environmental and economic levels, two key sulphur abatement strategies for a 1998-built cruise vessel nearing the end of its service life: (i) the installation of open-loop scrubbers with fuel enhancement devices, and (ii) a switch to marine diesel oil as main fuel. The analysis was based on real operational data from a cruise vessel. For the environmental assessment, a Tier III hybrid emissions model was used. The results show that scrubbers reduce SO_x emissions by approximately 97% but increase fuel consumption by 3.6%, raising both CO₂ and NO_x emissions, while particulate matter decreases by only 6.7%. In contrast, switching to MDO achieves over 99% SO_x reduction, an 89% drop in particulate matter, and a nearly 5% reduction in CO₂ emissions. At an economic level, it was found that, despite a CAPEX of nearly USD 1.9 million, scrubber installation provides an average annual net saving exceeding USD 8.2 million. From the deterministic and probabilistic analyses performed, including Monte Carlo simulations under various fuel price correlation scenarios, scrubber installation consistently shows high profitability, with NPVs surpassing USD 70 million and payback periods under four months. Full article

Background: Understanding the duration and quality of immune memory following SARS-CoV-2 infection and vaccination is critical for informing public health strategies and vaccine development. While waning antibody levels have raised concerns about long-term protection, the persistence of memory B cells (MBCs) and T cells plays a vital role in sustaining immunity. Materials and Methods: We conducted a longitudinal prospective study over 12 months, enrolling 285 participants in total, either after natural infection or vaccination with BNT162b2 or mRNA-1273. Peripheral blood samples were collected at four defined time points (baseline, 1–2 months, 6–7 months, and 12–13 months after vaccination or disease onset). Immune responses were assessed through serological assays quantifying anti-RBD IgG and neutralizing antibodies, B-ELISPOT, and multiparameter flow cytometry for S1-specific memory B cells. Results: Both mRNA vaccines induced robust B cell and antibody responses, exceeding those observed after natural infection. Memory B cell frequencies peaked at 6 months and declined by 12 months, but remained above the baseline. The mRNA-1273 vaccine elicited stronger and more durable humoral and memory B-cell-mediated immunity compared to BNT162b2, likely influenced by its higher mRNA dose and longer prime-boost interval. Class-switched memory B cells and S1-specific B cells were significantly expanded in vaccine recipients. Natural infection induced more heterogeneous immune memory. Conclusions: Both mRNA vaccination and natural SARS-CoV-2 infection induce a comparable expansion of memory B cell subsets, reflecting a consistent pattern of humoral immune responses across all studied groups. These findings highlight the importance of vaccination in generating sustained immunological memory and suggest that the vaccine platform and dosage influence the magnitude and durability of immune responses against SARS-CoV-2. Full article

We describe the output characteristics of a compact, passively Q-switched, diode-end-pumped (Er/Yb):Glass laser operating in a multi-pulse burst mode. Such operation enables much higher optical efficiency and larger output of total energy than possible with conventional solitary pulse emissions. The laser generated a 15-pulse burst of pulses at 1.5 μm with a combined energy of 5.8 mJ. Measurements of pulse energies, spatial mode characteristics, output beam divergence, and impact of thermal effects in the (Er/Yb):Glass are described. These results are compared to predictions of a numerical simulation using a finite-difference beam propagation method (FD-BPM) that incorporates thermal effects caused by distributed local heating in the glass. We show good agreement between the measured and simulated laser output characteristics. Full article

Addressing the imperative for energy transition amid depleting fossil fuels, distributed generation (DG) is increasingly integrated into distribution networks (DNs). This integration necessitates low-carbon dispatching solutions that reconcile economic and environmental objectives. To bridge the gap between conventional “electricity perspective” optimization and emerging “carbon perspective” requirements, this research integrated Carbon Emission Flow (CEF) theory to analyze spatiotemporal carbon flow characteristics within DN. Recognizing the limitations of the single-objective approach in balancing multifaceted demands, a multi-objective optimization model was formulated. This model could capture the spatiotemporal dynamics of nodal carbon intensity for low-carbon dispatching while comprehensively incorporating diverse operational economic costs to achieve collaborative low-carbon and economic dispatch in DG-embedded DN. To efficiently solve this complex constrained model, a novel Q-learning enhanced Moth Flame Optimization (QMFO) algorithm was proposed. QMFO synergized the global search capability of the Moth Flame Optimization (MFO) algorithm with the adaptive decision-making of Q-learning, embedding an adaptive exploration strategy to significantly enhance solution efficiency and accuracy for multi-objective problems. Validated on a 16-node three-feeder system, the method co-optimizes switch configurations and DG outputs, achieving dual objectives of loss reduction and carbon emission mitigation while preserving radial topology feasibility. Full article

Background/Objective: This study aimed to evaluate the effectiveness of very early oral transition in Enterobacterales bloodstream infections (E-BSIs), identify factors associated with it, compare the effectiveness of different oral options, and assess its economic and ecological benefits. Methods: Retrospective, observational cohort study including monomicrobial E-BSI in clinically stable adult patients by day 3 of bacteremia with oral antibiotic options. Transition to oral antibiotics by day 3 or earlier (early oral (EO) group) was compared to later transition or remaining on intravenous therapy (nEO group). Early oral transition-associated factors were analyzed. Oral high-dose beta-lactams (BLs) were compared to quinolones (QLs) or trimethoprim/sulfamethoxazole (TS). Economic and ecological costs were assessed. Results: Of 345 E-BSI, 163 (47.2%) were in the EO group, characterized by more urinary tract infections (UTIs) and shorter hospital stays. The nEO group had higher Charlson Comorbidity Index (CCI), extended-spectrum beta-lactamase (ESBL) production, greater source control need, and longer time to clinical stability. There were no significant differences in mortality and relapse. UTIs were associated with early oral transition (OR 2.02, IC 95% 1.18–3.48), while higher CCI (0.85, 0.77–0.95), source control need (0.39, 0.19–0.85), longer time to clinical stability (0.51, 0.39–0.66), and ESBL isolates (0.39, 0.19–0.80) hindered this practice. High-dose BLs and QL/TS were equally effective. Early oral transition resulted in 38.794 KgCO₂eq reduction and EUR 269,557.99 savings. Conclusions: Very early oral transition at day 3 or before in stable E-BSI patients is effective, eco-sustainable, and cost-effective; UTI is related with the early oral switch, while comorbidities, ESBL production, source control need, or longer time to clinical stability hinder this practice. Full article

Green hydrogen will play a crucial role in the future of emission reduction in air traffic in the long-term, as it will completely eliminate CO₂ emissions and significantly reduce other pollutants such as contrails and nitrogen oxides. Hydrogen offers a promising alternative to kerosene for short- and medium-haul flights, particularly through direct combustion and hydrogen fuel cell technology in new aircraft concepts. Against the background of the immense capital-intensive infrastructure adjustments that are required at airports for this purpose and the simultaneously high future hydrogen demand for the shipping industry, this paper analyses the emission savings potential in Europe if airports near seaports would switch to hydrogen-powered flight connections. Full article

Relaxation behavior of water confined in reverse micelles under temperature-induced micelle clustering is undertaken using broadband dielectric spectroscopy in frequency range 1 Hz–20 GHz. All microemulsion systems with sufficiently noticeable micelle water pool (water/surfactant molar ratio W > 10) depict three relaxation processes, in low, high and microwave frequencies, anchoring with relaxation of shell (bound) water, orientation of surfactant anions at water-surfactant interface and relaxation of bulk water confined in reverse micelles. The analysis of dielectric relaxation processes in AOT-based w/o microemulsions under temperature induced clustering of reverse micelles were made according to structural information obtained in NMR and conductometry experiments. The “wait and switch” relaxation mechanism was applied for the explanation of results for water in the bound and bulk states under spatial limitation in reverse micelles. It was shown that surfactant layer predominantly influences the bound water. The properties of water close to AOT interface are determined by strong interactions between water and ionic AOT molecules, which perturb water H-bonding network. The decrease in micelle size causes a weakening of hydrogen bonds, deformation of its steric network and reduction in co-operative relaxation effects. Full article

Ceria is an important redox catalyst due to the facile Ce³⁺/Ce⁴⁺ switching at its surface. Therefore, in situ determination of the oxidation state of surface cerium cations is of significant interest. Infrared spectroscopy of probe molecules such as CO holds great potential for this purpose. However, the ability of CO to reduce Ce⁴⁺ cations is an important drawback as it alters the initial cerium speciation. Dinitrogen (N₂), due to its chemical inertness, presents an attractive alternative. We recently demonstrated that low-temperature ¹⁵N₂ adsorption on stoichiometric ceria leads to the formation of complexes with Ce⁴⁺ cations on the (110) and (100) planes (bands at 2257 and 2252 cm⁻¹, respectively), while the (111) plane is inert. Here, we report results on the low-temperature ¹⁵N₂ adsorption on reduced ceria nanoshapes (cubes, polyhedra, and rods). A main band at 2255 cm⁻¹, with a weak shoulder at 2254 cm⁻¹, was observed. We attributed these bands to ¹⁵N₂ adsorbed on Ce³⁺ sites located on edges and corners as well as on {100} facets. In conclusion, ¹⁵N₂ adsorbs on the most acidic surface Ce³⁺ sites and enables their distinction from Ce⁴⁺ cations. Full article

This study examines how Chinese EFL learners behave in peer interactions by negotiating meaning through communication strategies. This is a small-scale study with both quantitative and qualitative analysis. Sixteen Chinese EFL students and one native English teacher were observed in an intensive English program. The students were asked to interact with their peers in a decision-making task and an information-gap task. Video-recorded data were collected, transcribed and analyzed. The results showed that negotiation occur more frequently in information-gap tasks than decision-making tasks and students primarily employed confirmation checks. For communication strategies used to negotiate, direct strategies were employed most frequently, in which students mainly used code-switch and mime. Indirect strategies followed, with repetition occurring as the most frequently employed strategy. Interactional strategies, including co-construction and appeal for help, were less frequently used. The findings highlight the influence of cultural factors and students’ motivation on their behaviors. Full article

In respiratory patients, limited adherence to and misuse of devices hinder the effectiveness of inhalation therapy. Switching inhalers for non-clinical reasons poses a risk of deterioration of respiratory disease and/or promotes poor adherence to therapy. The objective of this work was to explore the impact of device changes for non-clinical reasons on clinical outcomes (primary) and costs (secondary), including carbon emissions in Spain. After a comprehensive literature search, the increased use of resources following worsening outcomes was apportioned using Spanish cost data and following the recommended pathways for care. We calculated the cost of re-training these patients and attributed carbon emissions in metric tons of CO₂ equivalent (tCO₂eq) to the excess resource use. In Spain, the impact of uncontrolled switching for non-clinical reasons in COPD has an annual estimated cost of EUR 923/patient, leading to an excess annual expenditure of more than EUR 216 million. For asthma patients, the annual impact is almost EUR 263/patient, representing an additional EUR 118 million excess annual expenditure. The environmental consequence of both conditions can be equated to almost 45 thousand tCO₂eq. Training all these patients on the new device would cost around EUR 35 million and would generate an extra impact reduction of about 2.6 thousand tCO₂eq in carbon emissions levy. Full article

Background: Tumor-associated macrophages (TAMs) play a crucial role in the tumor microenvironment (TME), and the metabolic activities of both tumor cells and TAMs have an impact on the TME. Moreover, the expression of MICA in tumor cells is closely associated with immune cells in hepatocellular carcinoma (HCC). However, it remains unclear whether MICA expression correlates with TAMs and influences the switch in macrophage phenotype by mediating metabolic alterations. Methods: Various biostatistical tools, qPCR, and IHC staining experiments were utilized to analyze data from The Cancer Genome Atlas (TCGA) and collected HCC tumor tissues. Single-cell RNA sequencing (scRNA-seq) analyses and a co-culture model of HCC cells with macrophages were performed to validate the findings from the biostatistical analyses. Results: Through the intersection of differentially expressed genes (DEGs), metabolism-related genes (MRGs), and co-expression genes (CEGs) with MICA in HCC, the EHHADH gene was identified. Gene set enrichment analyses were conducted to further confirm the role of EHHADH. EHHADH expression is decreased in HCC tumors and can serve as a prognostic biomarker for HCC. Expressions of MICA and EHHADH exhibited significant correlations with various phenotypic macrophages and exerted opposing effects on M1-like and M2-like macrophages infiltrating HCC. The underlying metabolic and molecular mechanisms revealed that MICA in tumor cells induced M2-like polarization through the PPAR/EHHADH pathway, which regulates the fatty acid oxidation (FAO) in macrophages. Conclusions: The metabolic gene EHHADH, which is associated with MICA, led to alterations in M2-like macrophages by promoting heightened fatty acid uptake and augmenting levels of FAO within macrophages. Full article

The production of β-alanine from fatty acid feedstocks presents a promising synthetic strategy due to its high carbon yield. However, the excessive reducing power generated during fatty acid utilization disrupts cellular redox balance, adversely affecting metabolism and limiting the efficiency and final yield of β-alanine production. To address this challenge, we engineered a co-production system in which excess reducing equivalents generated during fatty acid β-oxidation and β-alanine biosynthesis were consumed by growth-coupled lycopene biosynthesis. The resulting dual-pathway strain, SA01, achieved 44.78 g/L β-alanine and 3.07 g/L lycopene in bioreactor fermentation, representing a 21.45% increase in β-alanine production compared to the β-alanine-producing strain WA01, and a 74.43% increase in lycopene production compared to the lycopene-producing strain LA01. Further optimization in strain SA06, involving cofactor engineering to shift redox flow from NADH to NADPH, enhanced the titers to 52.78 g/L β-alanine and 3.61 g/L lycopene. Metabolite analysis confirmed a decrease in intracellular NADH and FADH₂ levels in SA06, indicating restoration of redox balance during the late fermentation phase. Additional improvements in the fermentation process, including gradual carbon source switching, optimization of the induction strategy, and fine-tuning of conditions during both growth and bioconversion phases, resulted in further increases in product titers, reaching 72 g/L β-alanine and 6.15 g/L lycopene. This study offers valuable insights into the development of microbial co-production systems, highlighting the critical role of dynamic cofactor and redox balance management, as well as process optimization, in improving production efficiency. Full article

It is widely recognized that fine surface structures found in nature contribute to surface functionality, and studies on the design of functional materials based on biomimetics have been actively conducted. In this study, polymer thin films with hierarchically ordered surface structure were prepared by combining both nanoimprinting using anodically oxidized porous alumina (AAO) as a template and surface-initiated atom transfer radical polymerization (SI-ATRP). To prepare such polymer films, we designed a new copolymer (poly{[2-(4-methyl-2-oxo-2H-chromen-7-yloxy)ethyl methacrylate]-co-[2-(2-bromo-2-methylpropionyloxy)ethyl methacrylate]}; poly(MCMA-co-HEMABr)) with coumarin moieties and α-haloester moieties in the pendants. The MCMA repeating units function to fix the pillar structure by photodimerization, and the HEMABr ones act as the polymerization initiation sites for SI-ATRP on the pillar surfaces. Surface structures consisting of vertically oriented multiple pillars were fabricated on the spin-coated poly(MCMA-co-HEMABr) thin films by nanoimprinting using an AAO template. Then, the coumarin moieties inside each pillar were crosslinked by UV light irradiation to fix the pillar structure. SEM observation confirmed that the internally crosslinked pillar structures were maintained even when immersed in organic solvents such as 1,2-dichloroethane and anisole, which are employed as solvents under SI-ATRP conditions. Finally, poly(2,2,2-trifluoroethyl methacrylate) and poly(N-isopropylacrylamide) chains were grafted onto the thin film by SI-ATRP, respectively, to prepare the hierarchically ordered surface structure. Furthermore, in this study, the surface properties as well as the thermoresponsive hydrophilic/hydrophobic switching of the obtained polymer films were investigated. The surface morphology and chemistry of the films with and without pillar structures were compared, especially the interfacial properties expressed as wettability. Grafting poly(TFEMA) increased the static contact angle for both flat and pillar films, and the con-tact angle of the pillar film surface increased from 104° for the flat film sample to 112°, suggesting the contribution of the pillar structure. Meanwhile, the pillar film surface grafted with poly(NIPAM) brought about a significant change in wettability when changing the temperature between 22 °C and 38 °C. Full article