Search Results (713)

In boron neutron capture therapy (BNCT), the intracellular localization and concentration of boron-10 atoms significantly influence therapeutic efficacy. Although various boronic-acid-targeted fluorescent probes have been developed to evaluate BNCT agents, most of these probes emit at short wavelengths and are, therefore, incompatible with common nuclear-staining reagents such as Hoechst 33342 and 4′,6-diamidino-2-phenylindole (DAPI). While our previously reported probe, BS-631, emitted fluorescence above 500 nm, it exhibited limitations in terms of reaction rate and fluorescence intensity. To address these issues, we developed a boronic-acid-targeted fluorescent probe with a longer emission wavelength, rapid reactivity, and strong fluorescence intensity. Herein, we designed and synthesized BTTQ, a probe based on a 2-(2-hydroxyphenyl)benzothiazole core structure. BTTQ exhibited immediate fluorescence upon reaction with 4-borono-L-phenylalanine (BPA), with an emission wavelength of 567 nm and a sufficiently high fluorescence quantum yield for detection. BTTQ quantitatively detected BPA with high sensitivity (quantification limit of 10.27 µM), suitable for evaluating BNCT agents. In addition, BTTQ exhibited selective fluorescence for BPA over metal cations. Importantly, BTTQ enabled fluorescence microscopic imaging of intracellular BPA distribution in living cells co-stained with Hoechst 33342. These results suggest that BTTQ is a promising fluorescent probe for the evaluation of future BNCT agents. Full article

One of the promising research areas involving carborane derivatives is boron neutron capture therapy (BNCT). Due to the high boron atom content in carborane molecules, these compounds are considered potential candidates for BNCT-based cancer treatment. Despite ongoing studies on various biologically active carboranyl-containing compounds, the search continues for substances that meet the stringent requirements of effective BNCT agents. In this study, the synthesis of carboranyl-containing derivatives of β-arylaliphatic acids is described, along with the investigation of their reactivity with primary and secondary amines, as well as with metals and their hydroxides. The molecular structures of the synthesized compounds were confirmed using Fourier-transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, elemental analysis, and mass spectrometry (LC-MS). Cytotoxicity of the water-soluble compound potassium 3-(2-isopropyl-1,2-dicarba-closo-dodecaboran-1-yl)-3-phenylpropanoate was evaluated using several cell lines, including HdFn and MCF-7. Full article

Histamine sensing that uses enzymatic reactions is the most common form of testing due to its selectivity for histamine. However, enzymes are difficult to store for long periods of time, and the inactivation of enzymes decreases the reliability of the results. In this study, we developed a novel, quick, and easily operated histamine sensing technique that takes advantage of the histamine redox reaction and does not require enzyme-based processes. Because the redox potential of histamine is relatively high, we used a boron-doped diamond (BDD) electrode that has a wide potential window. At pH 8.4, which is between the acidity constant of histamine and the isoelectric point of histidine, it was found that an oxygen-terminated BDD surface successfully detected histamine, both selectively and exclusively. Measurements of the sensor’s responses to extracts from fish meat samples that contained histamine at various concentrations revealed that the sensor responds linearly to the histamine concentration, thus allowing it to be used as a calibration curve. The sensor was used to measure histamine in another fish meat sample treated as an unknown sample, and the response was fitted to the calibration curve to perform an inverse estimation. When estimated in this way, the histamine concentration matched the certified value within the range of error. A more detailed examination showed that the sensor response was little affected by the histidine concentration in the sample. The detection limit was 20.9 ppm, and the linear response range was 0–150 ppm. This confirms that this sensing method can be used to measure standard histamine concentrations. Full article

In this work, we described the synthesis of 4-(methoxycarbonyl)phenyl 5-bromofuran-2-carboxylate by reacting 5-bromofuroic acid with methylparaben in the incorporation of DCC/DMAP (Steglich esterification) as coupling agents. Later on, we subsequently synthesized a series of 4-(methoxycarbonyl)phenyl 5-aryl furan-2-carboxylates (5a–5e) through Suzuki coupling catalyzed by palladium (0) between 4-(methoxycarbonyl)phenyl 5-bromofuran-2-carboxylate (3) with several substituted arylated and heteroaryl boronic acids (4). DFT calculations were computed to elucidate electronic structural features of synthesized molecules (5a–5e) and to validate these findings by correlating with theoretical and experimental spectroscopic analysis. Furthermore, geometrical optimization, thermodynamic features, as FMO orbitals, MESP maps, NLO behavior and reactivity descriptors, were also determined from the PBE0 D3BJ/def2-TZVP/SMD_1,4-dioxane theory level to confirm the structural features of synthesized molecules. Full article

An important property of arylboronic acids, particularly when considering their use in medicinal chemistry, is their pK_a in aqueous solution. The results of computational determination of absolute pK_as of arylboronic acids can be very disappointing in comparison to available experimental results, particularly in the case of large substituents. In this paper, the main origin of this problem is identified. It is shown that in order to obtain accurate pK_a values for arylboronic acids from computational quantum chemistry, it is necessary to consider the effect of different possible conformations of the hydroxyl groups in the acid and its conjugate base together with the low-energy conformations of their substituents. An improved practical procedure for the computational determination of the pK_as of arylboronic acids is proposed and applied to a set of recently synthesized arylboronic acids, yielding consistent results. Full article

Glucose-responsive insulin delivery systems that effectively regulate insulin retention and release in response to real-time fluctuation of glucose levels are highly desirable for diabetes care with minimized risk of hypoglycemia. Herein, we report a class of glucose-sensitive copolymer microgels, prepared from a simple one-pot precipitation copolymerization of 4-vinylphenylboronic acid (VPBA), 2-(dimethylamino) ethyl acrylate (DMAEA), and oligo(ethylene glycol) methyl ether methacrylate (M_w = 300, MEO₅MA), for gated glucose-responsive insulin release within the physiologically desirable glucose level range. The composition of the p(VPBA-DMAEA-MEO₅MA) copolymer microgels were analyzed using NMR and FTIR spectra. The cis-diols of glucose can reversibly bind with the −B(OH)₂ groups of the VPBA component in the microgels, resulting in the formation of negatively charged boronate esters that induce the volume phase transition of the microgels. The DMAEA component is incorporated to reduce the pK_a of VPBA, thus improving the glucose sensitivity of the microgels at physiological pH. The neutral hydrophilic MEO₅MA component is used to tune the onset of the glucose responsiveness of the microgels to the physiologically desirable levels. The more the MEO₅MA component copolymerized in the microgels, the greater the glucose concentration required to initiate the swelling of the microgels to trigger the release of insulin. When the onset of the glucose response was tuned to 4−5 mM, the copolymer microgels retained insulin effectively in the hypo-/normo-glycemic range but also released insulin efficiently in response to the elevation of glucose levels in the hyperglycemic range, which is essential for diabetes management. The copolymer microgels display no cytotoxicity in vitro. Full article

Saccharides play important roles in human health and life. However, detecting and differentiating the saccharide types using one probe is difficult even under optimized conditions due to the similar structures of different saccharides. In this study, only one sensor was used to construct the array for the discrimination of different types of saccharides on the basis of a dialdehyde-diboronic acid-functionalized tetraphenylethene (TPE-DABA) under different pH conditions. By integrating the fluorescence responses of the probe with linear discriminant analysis (LDA), 12 kinds of saccharides and the polyhydroxy compound sorbitol could be distinguished and identified by as few as one sensor probe. This study provides a reference for developing more simple and effective sensor arrays for saccharides. Full article

1,3,4-Oxadiazoles containing boronic acid moieties are promising as a highly versatile class of compounds with significant utility across various scientific domains. The diverse synthetic methodologies for their preparation make these compounds valuable precursors for developing novel entities with tailored properties in medicinal chemistry, agrochemistry, and materials science. This review systematically compiles and discusses synthetic methods for the direct and indirect incorporation of boronic acid derivatives into 1,3,4-oxadiazole scaffolds. Understanding these strategies is particularly important because of their key role in modern synthetic transformations, especially Suzuki–Miyaura cross-coupling reactions, which enable easy access to a new generation of structurally diverse 1,3,4-oxadiazole-based compounds. The synthetic procedures and reactions discussed are based on the currently available literature, offering a comprehensive overview of this rapidly evolving field. Full article

Head and neck cancer (HNC) is a highly aggressive malignancy with limited treatment options and poor prognosis. Inflammation plays a critical role in HNC progression, with elevated levels of pro-inflammatory cytokines such as TNF, IL-6, IL-8, and IL-1β contributing to tumor development. In this study, a novel series of boronic chalcones was designed and synthesized as potential dual-action anticancer and anti-inflammatory agents. The most potent compounds were evaluated for their cytotoxicity against Squamous Cell Carcinoma (SCC-25), and their selectivity index (SI) was determined. Compound 5 emerged as the most promising, displaying cytotoxicity against cancer cells, with IC₅₀ values of 17.9 µM and a favorable SI (>3). Mechanistic studies revealed that its anticancer activity was independent of p53 status, and annexin V/PI staining indicated cell death via necrosis. Interestingly, compound 5 also significantly reduced pro-inflammatory cytokine levels, as TNF and IL-6. Furthermore, drug metabolism and pharmacokinetics (DMPK) studies demonstrated that compound 5 exhibited moderate solubility and high permeability. These findings underscore the crucial role of the boronic acid moiety in enhancing both anticancer and anti-inflammatory properties. Full article

Since the approval of Bortezomib (Velcade^®) by the U.S. Food and Drug Administration (FDA) in 2003, boron-containing drugs have successfully entered the global market, spanning therapeutic areas such as anticancer, antibacterial, and antifungal agents. Meanwhile, boron is an essential trace element for plant growth, and boronic acid has been widely used as plant resistance inducers and growth promoters. In 2024, the Fungicide Resistance Action Committee (FRAC) introduced benzoxaboroles as a new category of fungicides, which fully demonstrates the significant application potential of boron-containing compounds (BCCs) in the field of agricultural fungicides. Recently, studies on BCCs in agriculture have emerged continuously. Compared with the systematic reviews in the pharmaceutical field, those focusing on BCCs in agriculture remain absent. This review systematically collates BCCs with reported biological activities from the literature over the past 20 years, from the perspective of boron-containing building blocks. It mainly focuses on the potential of boronic acid derivatization and its activities in agrochemicals. Additionally, it covers the applications of boron-containing building blocks in pharmaceuticals, including their action mechanisms. Full article

Silica fume-based geopolymer composite coatings, an approach to using metallurgical solid waste, exert flame retardancy with ecological, halogen-free, and environmentally friendly advantages, but their fire resistance needs to be improved further. Herein, a silica fume-based geopolymer composite flame-retardant coating was designed by doping boric acid (BA), zinc phytate (ZnPA), and melamine (MEL). The results of a cone calorimeter demonstrated that appropriate ZnPA and BA significantly enhanced its flame retardancy, evidenced by the peak heat release rate (p-HRR) decreasing from 268.78 to 118.72 kW·m⁻², the fire performance index (FPI) increasing from 0.59 to 2.83 s·m²·kW⁻¹, and the flame retardancy index increasing from 1.00 to 8.48, respectively. Meanwhile, the in situ-formed boron phosphate (BPO₄) facilitated the residual resilience of the fire-barrier layer. Furthermore, the pyrolysis kinetics indicated that the three-level chemical reactions governed the pyrolysis of the coatings. BPO₄ made the pyrolysis E_α climb from 94.28 (P5) to 127.08 (B3) kJ·mol⁻¹ with temperatures of 731–940 °C, corresponding to improved thermal stability. Consequently, this study explored the synergistic flame-retardant mechanism of silica fume-based geopolymer coatings doped with ZnPA, BA, and MEL, providing an efficient strategy for the high-value-added recycling utilization of silica fume. Full article

Boronic acids are an important class of molecules diversely used in organic synthesis, catalysis, medicinal chemistry, and for the design of functional materials. Particularly, aryl boronic acids in the solid state are known to exhibit pharmaceutical and photoluminescent properties for antimicrobial, sensing, and drug delivery applications. Furthermore, the phenazine molecule is known for its diverse pharmacological properties, including antibiotic activity. In the case of molecular crystalline solids, it is well established that understanding noncovalent interactions remains key to designing or engineering their functional properties. While both aryl boronic acids and phenazine molecules individually represent an important class of compounds, their co-assembly in the crystalline state is of interest within the context of supramolecular chemistry and crystal engineering. Herein, we report the supramolecular features of two newly synthesized cocrystals, which are composed of para-F/CF₃-substituted phenylboronic acids, respectively, and phenazine, as demonstrated by structure analysis by single-crystal X-ray diffraction. Full article

Fluorescent chemosensors are increasingly becoming relevant in recognition chemistry due to their sensitivity, selectivity, fast response time, real-time detection capability, and low cost. Boronic acids have been reported for the recognition of mycolactone, the cytotoxin responsible for tissue damage in Buruli ulcer disease. A library of fluorescent arylboronic acid chemosensors with various signaling moieties with certain beneficial photophysical characteristics (i.e., aminoacridine, aminoquinoline, azo, BODIPY, coumarin, fluorescein, and rhodamine variants) and a recognition moiety (i.e., boronic acid unit) were rationally designed and synthesised using combinatorial approaches, purified, and fully characterised using a set of complementary spectrometric and spectroscopic techniques such as NMR, LC-MS, FT-IR, and X-ray crystallography. In addition, a complete set of basic photophysical quantities such as absorption maxima (λ_abs^max), emission maxima (λ_em^max), Stokes shift (∆λ), molar extinction coefficient (ε), fluorescence quantum yield (Φ_F), and brightness were determined using UV-vis absorption and fluorescence emission spectroscopy techniques. The synthesised arylboronic acid chemosensors were investigated as chemosensors for mycolactone detection using the fluorescent-thin layer chromatography (f-TLC) method. Compound 7 (with a coumarin core) emerged the best (λ_abs^max = 456 nm, λ_em^max = 590 nm, ∆λ = 134 nm, ε = 52816 M⁻¹cm⁻¹, Φ_F = 0.78, and brightness = 41,197 M⁻¹cm⁻¹). Full article

The procedure for the generation of azirinyl-substituted nitrile oxides by the reaction of 2-(diazoacetyl)-2H-azirines with tert-butyl nitrite while preserving the azirine ring has been developed. The [3+2] cycloaddition of azirinyl-substituted nitrile oxides to terminal acetylenes produced azirinyl(isoxazolyl)ketones with various substituents in position 3 of azirine and position 5 of isoxazole fragments in a 51–91% yield at room temperature in DCM. DFT calculations and experimental data are consistent with the assumption that the formation of azirinyl-substituted nitrile oxides is accelerated by the acid catalyst. Cycloadducts of nitrile oxides with aryl/hetarylacetylenes and DMAD can be obtained by catalysis with boron trifluoride etherate, which significantly expands the scope of application of the reaction. Expansion of the azirine ring of the prepared cycloadducts allows obtaining a wide range of structurally diverse functionalized isoxazole-containing heterocyclic hybrids. LED light induces isomerization of the azirinecarbonyl moiety of the azirinyl(isoxazolyl)ketones, resulting in the formation of a set of 3,5’-biisoxazoles in a 40–71% yield, while the catalytic reaction of the azirine moiety with 1,3-diketones opens the way to pyrrole- and isoxazole-containing hybrids. 2-(Isoxazole-3-ylcarbonyl)-3-arylazirines were also easily isomerized to 3-(oxazol-5-yl)isoxazoles in methanol in the presence of excess potassium carbonate at room temperature. Full article

Background/Objectives: Positron emission tomography (PET) and single-photon emission computed tomography (SPECT) are highly sensitive clinical imaging modalities, frequently employed in conjunction with magnetic resonance imaging (MRI) or computed tomography (CT) for diagnosing a wide range of disorders. Efficient and robust radiolabeling methods are needed to accommodate the increasing demand for PET and SPECT tracer development. Copper-mediated radiohalogenation (CMRH) reactions enable rapid late-stage preparation of radiolabeled arenes, yet synthetic challenges and radiolabeling precursors’ instability can limit the applications of CMRH approaches. Methods: A series of aryl-boronic acids were converted into their corresponding aryl-boronic acid 1,1,2,2-tetraethylethylene glycol esters [ArB(Epin)s] and aryl-boronic acid 1,1,2,2-tetrapropylethylene glycol esters [ArB(Ppin)s] as stable and versatile precursor building blocks for radiolabeling via CMRH. General protocols for the preparation of ¹⁸F-labeled and ¹²³I-labeled arenes utilizing CMRH of these substrates were developed and applied. The radiochemical conversions (RCC) were determined by radio-(U)HPLC. Results: Both ArB(Epin)s and ArB(Ppin)s-based radiolabeling precursors were prepared in a one-step synthesis with chemical yields of 49–99%. Radiolabeling of the aryl-boronic esters with fluorine-18 or iodine-123 via CMRH furnished the corresponding radiolabeled arenes with RCC of 7–99% and 10–99%, respectively. Notably, a radiohalogenated prosthetic group containing a vinyl sulfone motif was obtained with an activity yield (AY) of 18 ± 3%, and applied towards the preparation of two clinically relevant PET tracers. Conclusions: This approach enables the synthesis of stable radiolabeling precursors and thus provides increased versatility in the application of CMRH, thereby supporting the development of novel PET and SPECT radiotracers. Full article