Search Results (24)

This paper presents a novel four-dimensional (4D) chaotic system exhibiting parametric symmetry breaking and multistability. Through equilibrium stability analysis, attractor reconstruction, Lyapunov Exponent spectra (LEs), and bifurcation diagrams, we reveal a continuous transition from symmetric period attractors to asymmetric chaotic states and rich dynamical behaviors. Additionally, considering the potential of this system in practical applications, a feedback control simulation circuit is designed and implemented to ensure its stability and effectiveness under real-world conditions. Finally, among various control strategies, this paper proposes an innovative Fixed-Time Sliding Mode Synchronization (FTSMS) strategy, determines its synchronization convergence time, and provides an important theoretical foundation for the practical application of the system. Full article

Lithium-ion batteries (LIBs) are widely used in electric vehicles and energy storage systems, making accurate state transition monitoring a key research topic. This paper presents a characterization method for large-format LIBs based on phased-array ultrasonic technology (PAUT). A finite element model of a large-format aluminum shell lithium-ion battery is developed on the basis of ultrasonic wave propagation in multilayer porous media. Simulations and comparative analyses of phased array ultrasonic imaging are conducted for various operating conditions and abnormal gas generation. A 40 Ah ternary lithium battery (NCMB) is tested at a 0.5C charge-discharge rate, with the state of charge (SOC) and ultrasonic data extracted. The relationship between ultrasonic signals and phased array images is established through simulation and experimental comparisons. To estimate the SOC, a fully connected neural network (FCNN) model is designed and trained, achieving an error of less than 4%. Additionally, phased array imaging, which is conducted every 5 s during overcharging and overdischarging, reveals that gas bubbles form at 0.9 V and increase significantly at 0.2 V. This research provides a new method for battery state characterization. Full article

As the low-carbon economy continues to advance, New Energy Vehicles (NEVs) have risen to prominence in the automotive industry. The design and utilization of lithium-ion batteries (LIBs), which are core component of NEVs, are directly related to the safety and range performance of electric vehicles. The requirements for a refined design of lithium-ion battery electrode structures and the intelligent adjustment of charging modes have attracted extensive research from both academia and industry. LIB models can be divided into mechanism-based models and data-driven models; however, the distinctions and connections between these two kinds of models have not been systematically reviewed as yet. Therefore, this work provides an overview and perspectives on LIB modeling from both mechanism-based and data-driven perspectives. Meanwhile, the potential fusion modeling frameworks including mechanism information and a data-driven method are also summarized. An introduction to LIB modeling technologies is presented, along with the current challenges and opportunities. From the mechanism-based perspective of LIB structure design, we further explore how electrode morphology and aging-related side reactions impact battery performance. Furthermore, within the realm of battery operation, the utilization of data-driven models that leverage machine learning techniques to estimate battery health status is investigated. The bottlenecks for the design, state estimation, and operational optimization of LIBs and potential prospects for mechanism-data hybrid modeling are highlighted at the end. This work is expected to assist researchers and engineers in uncovering the potential value of mechanism information and operation data, thereby facilitating the intelligent transformation of the lithium-ion battery industry towards energy conservation and efficiency enhancement. Full article

In this paper, the characteristics of absolute value memristors are verified through the circuit implementation and construction of a chaotic system with a conditional symmetric fractional-order memristor. The dynamic behavior of fractional-order memristor systems is explored using fractional-order calculus theory and the Adomian Decomposition Method (ADM). Concurrently, the investigation probes into the existence of coexisting symmetric attractors, multiple coexisting bifurcation diagrams, and Lyapunov exponent spectra (LEs) utilizing system parameters as variables. Additionally, the system demonstrates an intriguing phenomenon known as offset boosting, where the embedding of an offset can adjust the position and size of the system’s attractors. To ensure the practical applicability of these findings, a fractional-order sliding mode synchronization control scheme, inspired by integer-order sliding mode theory, is designed. The rationality and feasibility of this scheme are validated through a theoretical analysis and numerical simulation. Full article

In this paper, a simple and novel fractional-order memristor circuit is established, which contains only resistance, inductance, capacitance and memristor. By using fractional calculus theory and the Adomian numerical algorithm, special bifurcations, chaotic degradation, ${\mathrm{C}}_0$ and Spectral Entropy (SE) complexity under one-dimensional and two-dimensional parameter variations with different orders, parameters and initial memristor values of the system were studied. Meanwhile, in order to better utilize the applications of fractional-order memristor systems in communication and security, a misalignment projection synchronization scheme for fractional-order systems is proposed, which overcomes the shortcomings of constructing Lyapunov functions for fractional-order systems to prove stability and designing controllers for the Laplace transform matrix. Full article

Accurate online parameter identification and state of charge (SOC) estimation are both very crucial for ensuring the operating safety of lithium-ion batteries and usually the former is a base of the latter. To achieve accurate and stable SOC estimation results, this paper proposes a model-based method, which incorporates a vector forgetting factor least square (VFFLS) algorithm and an improved adaptive cubature Kalman filter (IACKF). Firstly, considering it is difficult for the traditional forgetting factor recursive least square (FFRLS) algorithm to balance the accuracy, convergence, and stability for multiple parameters with different time-varying periods, an improved VFFLS method is employed to determine the multiple parameters of the first-order RC battery model online. It supersedes the single forgetting factor in the FFRLS with multiple forgetting factors in a vector form for improving adaptive capability to multiple time-varying parameters. Secondly, aiming at the fact that the standard cubature Kalman filter (CKF) cannot operate properly when the error covariance matrix is non-positive definite, which is caused by disturbance, initial error, and the limit of the computer word length, the UR decomposition rather than the Cholesky decomposition is applied, thus improving the algorithm stability. In addition, an adaptive update strategy is added to the CKF to enhance accuracy and convergence speed. Finally, comparative experiments with different operating patterns, positive and non-positive definite error covariance matrices, and temperatures are carried out. Experimental results showed that the proposed method can estimate the SOC accurately and stably. Full article

Processing quality is an important economic wheat trait. The marker-assisted selection (MAS) method plays a vital role in accelerating genetic improvement of processing quality. In the present study, processing quality in a panel of 165 cultivars grown in four environments was evaluated by mixograph. An association mapping analysis using 90 K and 660 K single nucleotide polymorphism (SNP) arrays identified 24 loci in chromosomes 1A, 1B (4), 1D, 2A, 2B (2), 3A, 3B, 3D (2), 4A (3), 4B, 5D (2), 6A, 7B (2) and 7D (2), explaining 10.2–42.5% of the phenotypic variances. Totally, 15 loci were stably detected in two or more environments. Nine loci coincided with known genes or QTL, whereas the other fifteen were novel loci. Seven candidate genes encoded 3-ketoacyl-CoA synthase, lipoxygenase, pyridoxal phosphate-dependent decarboxylase, sucrose synthase 3 and a plant lipid transfer protein/Par allergen. SNPs significantly associated with processing quality and accessions with more favorable alleles can be used for marker-assisted selection. Full article

Previous studies indicated long non-coding RNAs (lncRNAs) participated in the pathogenesis of atrial fibrillation (AF). However, little is known about the role of lncRNAs in AF-induced electrical remodeling. This study aimed to investigate the regulatory effect of lncRNA GAS5 (GAS5) on the electrical remodeling of neonatal rat cardiomyocytes (NRCMs) induced by rapid pacing (RP). RNA microarray analysis yielded reduced GAS5 level in NRCMs after RP. RT-qPCR, western blot, and immunofluorescence yielded downregulated levels of Nav1.5, Kv4.2, and Cav1.2 after RP, and whole-cell patch-clamp yielded decreased sodium, potassium, and calcium current. Overexpression of GAS5 attenuated electrical remodeling. Bioinformatics tool prediction analysis and dual luciferase reporter assay confirmed a direct negative regulatory effect for miR-27a-3p on lncRNA-GAS5 and HOXa10. Further analysis demonstrated that either miR-27a-3p overexpression or the knockdown of HOXa10 further downregulated Nav1.5, Kv4.2, and Cav1.2 expression. GAS5 overexpression antagonized such effects in Nav1.5 and Kv4.2 but not in Cav1.2. These results indicate that, in RP-treated NRCMs, GAS5 could restore Nav1.5 and Kv4.2 expression via the miR-27a-3p/HOXa10 pathway. However, the mechanism of GAS5 restoring Cav1.2 level remains unclear. Our study suggested that GAS5 regulated cardiac ion channels via the GAS5/miR-27a-3p/HOXa10 pathway and might be a potential therapeutic target for AF. Full article

Accurate estimation of the state of charge (SOC) and temperature of batteries is essential to ensure the safety of energy storage systems. However, it is very difficult to obtain multiple states of the battery with fewer sensors. In this paper, a joint estimation method for a lithium iron phosphate battery’s SOC and temperature based on ultrasonic reflection waves is proposed. A piezoelectric transducer is affixed to the surface of the battery for ultrasonic–electric transduction. Ultrasonic signals are excited at the transducer, transmitted through the battery, and transmitted back to the transducer by reaching the underside of the battery. Feature indicator extraction intervals of the battery state are determined by sliding–window matching correlation analysis. Virtual samples are used to expand the data after feature extraction. Finally, a backpropagation (BP) neural network model is applied to the multistate joint estimation of a battery in a wide temperature range. According to the experimental results, the root mean square error (RMSE) of the lithium-ion battery’s SOC and temperature estimation results is 7.42% and 0.40 °C, respectively. The method is nondestructive and easy to apply in battery management systems. Combined with the detection of gas production inside the battery, this method can improve the safety of the battery system. Full article

Accurate capacity estimation of onboard lithium-ion batteries is crucial to the performance and safety of electric vehicles. In recent years, data-driven methods based on partial charging curve have been widely studied due to their low requirement of battery knowledge and easy implementation. However, existing data-driven methods are usually based on a fixed voltage segment or state of charge, which would be failed if the charging process does not cover the predetermined segment due to the user’s free charging behavior. This paper proposes a capacity estimation method using multiple small voltage sections and back propagation neural networks. It is intended to reduce the requirement of the length of voltage segment for estimating the complete battery capacity in an incomplete charging cycle. Firstly, the voltage segment most possibly covered is selected and divided into a number of small sections. Then, sectional capacity and skewness of the voltage curve are extracted from these small voltage sections, and severed as health factors. Secondly, the Box–Cox transformation is adopted to enhance the correlation between health factors and the capacity. Thirdly, multiple back propagation neural networks are constructed to achieve capacity estimation based on each voltage section, and their weighted average is taken as the final result. Finally, two public datasets are employed to verify the accuracy and generalization of the proposed method. Results show that the root mean square error of the fusion estimation is lower than 4.5%. Full article

The ideal magnetic flux-controlled memristor was introduced into a four-dimensional chaotic system and combined with fractional calculus theory, and a novel four-dimensional commensurate fractional-order system was proposed and solved using the Adomian decomposition method. The system orders, parameters, and initial values were studied as independent variables in the bifurcation diagram and Lyapunov exponents spectrum, and it was discovered that changing these variables can cause the system to exhibit more complex and rich dynamical behaviors. The system had an offset boosting, which was discovered by adding a constant term after the decoupled linear term. Finally, the results of the numerical simulation were verified through the use of analog circuits and FPGA designs, and a control scheme for the system circuit was also suggested. Full article

The forkhead box O (FOXO) transcription factors (TFs) family are frequently mutated, deleted, or amplified in various human cancers, making them attractive candidates for therapy. However, their roles in pan-cancer remain unclear. Here, we evaluated the expression, prognostic value, mutation, methylation, and clinical features of four FOXO family genes (FOXO1, FOXO3, FOXO4, and FOXO6) in 33 types of cancers based on the Cancer Genome Atlas (TCGA) and Genotype Tissue Expression (GTEx) databases. We used a single sample gene set enrichment analysis (ssGSEA) algorithm to establish a novel index called “FOXOs score”. Moreover, we investigated the association between the FOXOs score and tumor microenvironment (TME), the responses to multiple treatments, along with drug resistance. We found that the FOXO family genes participated in tumor progression and were related to the prognosis in various types of cancer. We calculated the FOXOs score and found that it was significantly correlated with multiple malignant pathways in pan-cancer, including Wnt/beta-catenin signaling, TGF-beta signaling, and hedgehog signaling. In addition, the FOXOs score was also associated with multiple immune-related characteristics. Furthermore, the FOXOs score was sensitive for predicting the efficacy of diverse treatments in multiple cancers, especially immunotherapy. In conclusion, FOXO family genes were vital in pan-cancer and were strongly correlated with the TME. A high FOXOs score indicated an excellent immune-activated TME and sensitivity to multiple treatments. Hence, the FOXOs score might potentially be used as a biomarker in patients with a tumor. Full article

The health benefits of whole wheat grains are partially attributed to their phenolic acid composition, especially that of trans-ferulic acid (TFA), which is a powerful natural antioxidant. Breeders and producers are becoming interested in wheat with enhanced health-promoting effects. This study investigated the effects of different nitrogen (N) application rates (0, 42, 84, 126, and 168 N kg ha⁻¹) on the phenolic acid composition of three wheat varieties in four locations for two years. The results indicate that the different N rates did not affect the TFA concentration but that they significantly affected the concentrations of para-coumaric acid, sinapic acid, and cis-ferulic acid in the wheat grains. A statistical analysis suggested that the wheat phenolic acid composition was predominantly determined by wheat variety, though there existed some interaction effect between the wheat variety and environments. The TFA concentration of the variety Jimai 22 was generally higher (with a mean value of 726.04 µg/g) but was easily affected by the environment, while the TFA concentration of the variety Zhongmai 578 (with a mean value of 618.01 µg/g) was more stable across the different environments. The results also suggest that it is possible to develop new wheat varieties with high yield potential, good end-use properties, and enhanced nutraceutical values. Full article

The full tubular pump device is taken as the research object in this article. This research method adopts the numerical simulation technology based on the SST (Shear-Stress-Transport) k-ω turbulence model to explore the internal flow characteristics of the stator–rotor cavity of the full tubular pump and optimize the stator–rotor clearance structure. The research shows that under the design conditions, compared with the axial flow pump, the torque increases by 47.91 N·m at the stator–rotor cavity structure and the efficiency decreases by about 20%. The torque at the rotor clearance of the full tubular pump accounts for about 50% of the torque at the rotor. Since there is a large area of backflow on both sides of the cavity, and there is a vortex structure on the inlet side of the cavity, it shows that the rotor structure and its area greatly affect the operating efficiency of the pump device. With the reduction in the rotor force area, the clearance length, and the outer diameter of the disc, the operating efficiency of the pump device gradually increases. Under the design conditions, the optimized model has a maximum efficiency increase of 14.04% and the torque at the cavity rotor is reduced by 39.25 N·m. The results show that the operating efficiency of the full tubular pump is closely related to its rotor structure area, and the force area of the rotor structure needs to be controlled in the actual design process. Full article

Accurate state characterization of batteries is conducive to ensuring the safety, reliability, and efficiency of their work. In recent years, ultrasonic non-destructive testing technology has been gradually applied to battery state estimation. In this paper, research on the state characterization of lithium-ion batteries based on ultrasonic guided wave (UGW) scanning is carried out. The laser Doppler vibrometer (LDV) and the X-Y stage are used to obtain the surface scanning UGW signal and the line scanning UGW signal of lithium-ion batteries under different states of charge and different aging degrees. The propagation law of UGWs in the battery is analyzed by surface scanning signals, then the energy spectrum of the signals is calculated, showing that the aging of the battery attenuates the transmission energy of UGWs. The “point” parameters are extracted from the scanning point signals. On this basis, the “line” parameters composed of line scanning multi-point signals are extracted. By analyzing the changing law of parameters during the charge–discharge process of batteries, several characteristic parameters that can be used to characterize the battery state of charge and state of health are obtained. The method has good consistency in the state characterization of the three batteries and provides a new approach for non-destructive testing and evaluation of battery states. Full article