Search Results (16)

High demand for energy consumption forced the exploration of renewable energy resources, and in this context, biodiesel has received intensive attention. The process of biodiesel production itself needs to be optimized in order to make it an eco-friendly and high-performance energy resource. Within this scheme, development of low-cost and reusable heterogeneous catalysts has received much attention. Mesoporous silica materials with the characteristics of having a high surface area and being modifiable, tunable, and chemical/thermally stable have emerged as potential solid support of powerful catalysts in biodiesel production. This review highlights the latest updates on mesoporous silica modifications including acidic, basic, enzyme, and bifunctional catalysts derived from varied functionalization. In addition, the future outlook for progression is also discussed in detail. Full article

The symmetric nano morphologies, asymmetric electronic structures, and as well as the heterojunctions of the developed photocatalytic systems perform a vital role in promoting light absorption, separation of electron and hole pairs and charge carrier transport to the surface when exposed to near-infrared (NIR) light. In this present work, we synthesized hematite (α-Fe₂O₃) nanoparticles (NPs) by a facile hydrothermal method and studied their structural, optical, and photocatalytic properties. Powder X-ray diffraction (XRD) confirmed the rhombohedral phase of the α-Fe₂O₃ NPs, and Fourier transform infrared spectroscopy (FT-IR) was used to investigate symmetric and asymmetric stretching vibrations of the functional groups on the surface of the catalysts. The optical bandgap energy was estimated to be 2.25 eV using UV-Vis diffuse reflectance spectroscopy (UV-Vis DRS) and scanning electron microscopy (SEM) images indicated sphere like morphology. The oxidation and reduction properties of α-Fe₂O₃ NPs were analyzed by cyclic voltammetry (CV). The α-Fe₂O₃ NPs were utilized for the degradation of methylene blue (MB) dye under natural sunlight. The experimental results demonstrate that the degradation efficiency was achieved at 33% in 2 h, and the pseudo-first-order rate constant was calculated to be 0.0033 min⁻¹. Full article

Currently, there is growing concern about minimizing the environmental impacts caused by the generation of waste on water, soil, air pollution, and contamination of the environment in general. Magnesium oxide (MgO) nanoballs (NBs) were synthesized by the hydrothermal method followed by a calcination process. The average size of particles dispersed in deionized water was 159.2 ± 70 nm. The energy band gap was calculated to be 5.14 eV. The magnetic behavior, cyclic voltammetry, and electrochemical impedance of MgO NBs were studied. Under visible-light irradiation, the photocatalytic activity of MgO nanoballs was investigated by methylene blue (MB) dye. Results showed that photodegradation for MB under visible light irradiation for 120 min and degradation results are fitted well with pseudo-first-order reaction kinetics with a rate constant of 0.00252 min⁻¹ and a correlation coefficient of 0.96. Full article

Photocatalysis has been recognized as a feasible method in water and wastewater treatment. Compared to other methods such as adsorption and chemical oxidation, the use of photocatalyst in the advanced oxidation processes gives benefits such as a longer lifetime of the catalyst and less consumable chemicals. Currently, explorations into low-cost, effective photocatalysts for organic contaminated water are being developed. Within this scheme, an easily separated photocatalyst with other functionality, such as high adsorption, is important. In this research, preparation of a magnetic nanocomposite photocatalyst based on agricultural waste, palm leaves biochar impregnated nickel nanoparticles (Ni/BC), was investigated. The nanocomposite was prepared by direct pyrolysis of palm leaves impregnated with nickel (II) chloride precursor. Furthermore, the physicochemical characterization of the material was performed by using an X-ray diffractometer (XRD), scanning electron microscopy-energy dispersive X-ray fluorescence (SEM-EDX), transmission electron microscopy (TEM), gas sorption analysis, X-ray photoelectron spectroscopy (XPS) and vibrating sample magnetometer (VSM). The photocatalytic activity of Ni/BC was evaluated for methyl violet (MV) photocatalytic oxidation. The results from XRD, XPS and TEM analyses identified single nickel nanoparticles dispersed on the biochar structure ranging from 30–50 nm in size. The dispersed nickel nanoparticles increased the BET specific surface area of biochar from 3.92 m²/g to 74.12 m²/g oxidation. High photocatalytic activity of the Ni/BC was exhibited by complete MV removal in 30 min for the concentration ranging from 10–80 mg/L. In addition, the Ni/BC showed stability in the pH range of 4–10 and reusability without any activity change until fifth usage. The separable photocatalyst is related to magnetism of about 13.7 emu/g. The results highlighted the role of biochar as effective support for Ni as photoactive material. Full article

Zirconium porous clay heterostructures (Zr-PCH) were synthesized using intercalated clay minerals by zirconium species with different contents of zirconium. The presence of zirconium and silica species was confirmed by X-ray diffraction, X-ray fluorescence, and magic-angle spinning nuclear magnetic resonance. The insertion of zirconium improved the thermal stability, the specific surface area with a maximum of 950 m²/g, and the acidity concentration of 0.993 mol of protons per g of solid. These materials were used to adsorb the basic blue-41 from aqueous solution. The adsorption efficiency was examined at different conditions, with a maximum adsorbed amount of 346 mg/g as estimated from Langmuir model. This value was dependent on zirconium content in the PCHs. The adsorption process was found to be favorable and spontaneous. The efficiency of the spent materials was maintained after five reuse cycles with a decrease by 15% of the original value for a particular Zr-PCH material with a Zr content of 6.82%. Single stage batch adsorber was suggested using the mass balance equation and Langmuir isotherm model. The amount of PCH materials required depended on the target percentage of adsorption at specific volume and initial concentration of the basic-blue-41 dye solution. Full article

Preparation of green synthesized silver nanoparticle (AgNPs)-doped hydroxyapatite (Ag/HA) utilizing Curcuma longa leaf extract and land snail (Achatina fulica) shell waste was performed. Physicochemical characteristics and antibacterial activity of Ag/HA composite as a function of Ag content was studied. Instrumental analysis such as XRD, SEM-EDX, TEM, and XPS were employed to characterize the nanocomposites. The physicochemical study revealed the maintained porous structure of HA after Ag immobilization, and from TEM analyses, it was found that the distributed spherical particles are associated with the dispersed Ag and have a particle diameter of around 5–25 nm. Antibacterial activity of the nanocomposite was evaluated against Escherichia coli, Staphylococcus aureus, Kliebsiella pneumonia, and Streptococcus pyogenes. The results showed that the varied Ag content (1.0; 1.6; and 2.4% wt) influenced the nanoparticle distribution in the nanocomposite and enhanced the antibacterial feature. Full article

Zn-Al Layered Double Hydroxides (Zn-Al LDHs) and its calcined form were successfully prepared and utilized for the removal of methyl violet (MV) and treatment of peat water by photocatalytic oxidation. The research was aimed to evaluate the effect of calcination to Zn-Al LDHs for the effect on the physicochemical character and the capability as a photocatalyst. The characterization of the samples was investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer–Emmet–Teller specific surface area (BET), and X-ray photoelectron spectroscopy (XPS). The results showed that the increased BET specific surface area along with the enhanced porous structure was achieved by the calcination procedure, which is associated with the enhanced interlayer space of d₀₀₃ identified by XRD analysis. Thermal conversion showed an influence to the increased band gap energy from 3.10 eV in the uncalcined Zn-Al LDHs into 3.16 eV for the calcined material. These character changes contributed to the enhanced photocatalytic activity of the Zn-AL LDHs by calcination, which was proposed and verified by experiments. It was observed that photocatalytic activity of the material for MV gave about a 45.57% removal of MV and a 68% removal for the natural organic material of the peat water. Full article

Advanced oxidation processes (AOPs) utilizing heterogeneous catalysts have attracted great attention in the last decade. The use of solid catalysts, including metal and metal oxide nanoparticle support materials, exhibited better performance compared with the use of homogeneous catalysts, which is mainly related to their stability in hostile environments and recyclability and reusability. Various solid supports have been reported to enhance the performance of metal and metal oxide catalysts for AOPs; undoubtedly, the utilization of clay as a support is the priority under consideration and has received intensive interest. This review provides up-to-date progress on the synthesis, features, and future perspectives of clay-supported metal and metal oxide for AOPs. The methods and characteristics of metal and metal oxide incorporated into the clay structure are strongly influenced by various factors in the synthesis, including the kind of clay mineral. In addition, the benefits of nanomaterials from a green chemistry perspective are key aspects for their further considerations in various applications. Special emphasis is given to the basic schemes for clay modifications and role of clay supports for the enhanced mechanism of AOPs. The scaling-up issue is suggested for being studied to further applications at industrial scale. Full article

Escalation fuel consumption occurs in various regions of the world. However, world oil reserves decline from year to year so that it becomes scarce and causes oil prices to surge up. This problem can be solved by saving fuel consumption. One method of saving fuel is adding bio-additives from citronella oil as a sustainable resource to diesel fuels. Citronellal, citronellol and geraniol are the main components of citronella oil which can be used as fuel additives. This study aimed to evaluate the effect of citronella oil fractions as bio-additives to the performance of diesel engine. The research stages include: extraction of citronella oil, vacuum fractionation of citronella oil, physical chemical characterization of citronella oil and its fractions, formulation of bio-additive -fuel blending, characterization of blending, and evaluation of fuel efficiency. The effect of concentration of the bio-additives was examined towards three diesel fuels; dexlite, pertamina-dex, and biosolar. The results showed two main fractions of citronella oil; citronellal dominant component (FA) and citronellol-geraniol dominant components (FB). The concentration variation of bio-additives was 0.1–0.5%. Fuel consumption efficiency was tested using diesel engine at an engine speed of 2000 rpm and a load increment of 1000, 2000 and 3000 psi with 7 min running time. The fractions represented the different tendencies to enhance the fuel efficiency up to 46%, influenced by the mixture’s concentration. Generally, citronella oil and the fractions showed the potency as bio-additive to diesel fuels. Full article

This study concerns papain enzyme assisted synthesis of virgin coconut oil (VCO) as a candidate in-house reference material. The study was conducted to obtain optimization of the VCO preparation with green processes as the standardized product which high stability and homogeneity. The method is expected to produce the candidate of in-house reference material to ensure the standards and quality of the VCO product. Based on the results of this study, the preparation of VCO was carried out using the papain. An optimum yield of 24.30%. was achieved under the following conditions: enzyme to coconut milk with a mass ratio of 0.6 g/L, under 500 mL water/g of coconut powder, at the temperature of 70 °C by five stages of extraction. The physicochemical properties as well as organoleptic feature of VCO which consist water content, peroxide number, free fatty acids, and iodine numbers are fit with the standard. The parameters exhibited the homogeneity and stability which be able recommended as candidate in-house reference material and have potentially as antibacterial agent. Antibacterial activity test showed that VCO has potential against Escherichia coli, Staphylococcus aureus, Propionibacterium acnes and Pseudomonas aeruginosa as shown by the inhibition zone in the testing. Full article

In this work, photoactive nanocomposites of ZnO/SiO₂ porous heterostructures (PCHs) were prepared from montmorillonite clay. The effects of preparation methods and Zn content on the physicochemical features and photocatalytic properties were investigated. Briefly, a comparison of the use of hydrothermal and microwave-assisted methods was done. The Zn content was varied between 5 and 15 wt% and the characteristics of the nanomaterials were also examined. The physical and chemical properties of the materials were characterized using X-ray diffraction, diffuse-reflectance UV-Vis, X-ray photoelectron spectroscopy, and gas sorption analyses. The morphology of the synthesized materials was characterized through scanning electron microscopy and transmission electron microscopy. The photocatalytic performance of the prepared materials was quantified through the photocatalytic degradation of methyl violet (MV) under irradiation with UV and visible light. It was found that PCHs exhibit greatly improved physicochemical characteristics as photocatalysts, resulting in boosting photocatalytic activity for the degradation of MV. It was found that varied synthesis methods and Zn content strongly affected the specific surface area, pore distribution, and band gap energy of PCHs. In addition, the band gap energy was found to govern the photoactivity. Additionally, the surface parameters of the PCHs were found to contribute to the degradation mechanism. It was found that the prepared PCHs demonstrated excellent photocatalytic activity and reusability, as seen in the high degradation efficiency attained at high concentrations. No significant changes in activity were seen until five cycles of photodegradation were done. Full article

The present study reported biofabrication of flower-like SnO₂ nanoparticles using Pometia pinnata leaf extract. The study focused on the physicochemical characteristics of the prepared SnO₂ nanoparticles and its activity as photocatalyst and antibacterial agent. The characterization was performed by XRD, SEM, TEM, UV-DRS and XPS analyses. Photocatalytic activity of the nanoparticles was examined on bromophenol blue photooxidation; meanwhile, the antibacterial activity was evaluated against Klebsiella pneumoniae, Escherichia coli Staphylococcus aureus and Streptococcus pyogenes. XRD and XPS analyses confirmed the single tetragonal SnO₂ phase. The result from SEM analysis indicates the flower like morphology of SnO₂ nanoparticles, and by TEM analysis, the nanoparticles were seen to be in uniform spherical shapes with a diameter ranging from 8 to 20 nm. SnO₂ nanoparticles showed significant photocatalytic activity in photooxidation of bromophenol blue as the degradation efficiency reached 99.93%, and the photocatalyst exhibited the reusability as the degradation efficiency values were insignificantly changed until the fifth cycle. Antibacterial assay indicated that the synthesized SnO₂ nanoparticles exhibit an inhibition of tested bacteria and showed a potential to be applied for further environmental and medical applications. Full article

In this study, a controlled-release formulation of duplex herbicides, namely, 2,4,5-trichlorophenoxybutyric acid (TBA) and 3,4-dichlorophenoxy-acetic acid (3,4D), was simultaneously embedded into Zn-Al-layered double hydroxides (LDHs). The resulting nanohybrid Zinc-Aluminium-3,4D-TBA (ZADTX) was composed of a well-ordered crystalline layered structure with increasing basal spacing from 8.9 Å to 20.0 Å in the Powder X-ray Diffraction (PXRD) with 3,4D and TBA anions located in the gallery of LDHs with bilayer arrangement. The release of 3,4D and TBA fit the pseudo-second-order model. This duplex nanohybrid possessed a well-controlled release property (53.4% release from TBA and 27.8% release from 3,4D), which was highly effective, requiring the use of a small quantity and, hence, environmentally safer. Full article

The catalytic and thermal decomposition of plastic waste to fuels over low-cost catalysts like zeolite, clay, and bimetallic material is highlighted. In this paper, several relevant studies are examined, specifically the effects of each type of catalyst used on the characteristics and product distribution of the produced products. The type of catalyst plays an important role in the decomposition of plastic waste and the characteristics of the oil yields and quality. In addition, the quality and yield of the oil products depend on several factors such as (i) the operating temperature, (ii) the ratio of plastic waste and catalyst, and (iii) the type of reactor. The development of low-cost catalysts is revisited for designing better and effective materials for plastic solid waste (PSW) conversion to oil/bio-oil products. Full article