Crystals | Top 10 Cited Papers in 2023 in the Section “Crystalline Metals and Alloys”
We would like to invite you to read the 2023 top 10 cited papers in the Section “Crystalline Metals and Alloys ” of Crystals (ISSN: 2073-4352). The papers are listed as follows:
1. “Grain Boundary Wetting Transition in the Mg-Based ZEK 100 Alloy”
by Boris Straumal, Natalya Khrapova, Aleksandr Druzhinin, Kristina Tsoy, Gregory Davdian, Valery Orlov, Gregory Gerstein and Alexander Straumal
Crystals 2023, 13(11), 1538; https://doi.org/10.3390/cryst13111538
Available online: https://www.mdpi.com/2073-4352/13/11/1538
2. “Friction Stir Welding of Non-Heat Treatable Al Alloys: Challenges and Improvements Opportunities”
by Behrouz Abnar, Samaneh Gashtiazar and Mousa Javidani
Crystals 2023, 13(4), 576; https://doi.org/10.3390/cryst13040576
Available online: https://www.mdpi.com/2073-4352/13/4/576
3. “Advancing PLA 3D Printing with Laser Polishing: Improving Mechanical Strength, Sustainability, and Surface Quality”
by Ray Tahir Mushtaq, Asif Iqbal, Yanen Wang, Aqib Mashood Khan and Mohammad Iskandar Petra
Crystals 2023, 13(4), 626; https://doi.org/10.3390/cryst13040626
Available online: https://www.mdpi.com/2073-4352/13/4/626
4. “Platinum Group Metals: Green Recovery from Spent Auto-Catalysts and Reuse in New Catalysts—A Review”
by Maria Luisa Grilli, Anca Elena Slobozeanu, Claudio Larosa, Daniela Paneva, Iakovos Yakoumis and Zara Cherkezova-Zheleva
Crystals 2023, 13(4), 550; https://doi.org/10.3390/cryst13040550
Available online: https://www.mdpi.com/2073-4352/13/4/550
5. “Computing the Durability of WAAM 18Ni-250 Maraging Steel Specimens with Surface Breaking Porosity”
by Daren Peng, Victor K. Champagne, Andrew S. M. Ang, Aaron Birt, Alex Michelson, Sam Pinches and Rhys Jones
Crystals 2023, 13(3), 443; https://doi.org/10.3390/cryst13030443
Available online: https://www.mdpi.com/2073-4352/13/3/443
6. “Microstructure, Shape Memory Effect, Chemical Composition and Corrosion Resistance Performance of Biodegradable FeMnSi-Al Alloy”
by Ana-Maria Roman, Ionelia Voiculescu, Ramona Cimpoeșu, Bogdan Istrate, Romeu Chelariu, Nicanor Cimpoeșu, Georgeta Zegan, Cătălin Panaghie, Nicoleta Monica Lohan, Mihai Axinte et al.
Crystals 2023, 13(1), 109; https://doi.org/10.3390/cryst13010109
Available online: https://www.mdpi.com/2073-4352/13/1/109
7. “Corrosion of Eutectic High-Entropy Alloys: A Review”
by Kaiyang Li, Yunlong Zhai, Minjie Lai, Min Song, Shanfang Zou, Guojie Huang, Khurram Yaqoob, Zhangwei Wang and Naiqiang Zhang
Crystals 2023, 13(8), 1231; https://doi.org/10.3390/cryst13081231
Available online: https://www.mdpi.com/2073-4352/13/8/1231
8. “A Critical Review of von Mises Criterion for Compatible Deformation of Polycrystalline Materials”
by Yan Huang and Jun Jiang
Crystals 2023, 13(2), 244; https://doi.org/10.3390/cryst13020244
Available online: https://www.mdpi.com/2073-4352/13/2/244
9. “Review on the Corrosion Behaviour of Nickel-Based Alloys in Supercritical Carbon Dioxide under High Temperature and Pressure”
by Yiyao Kang, Xuesong Leng, Lin Zhao, Bowen Bai, Xiaoya Wang and Hongsheng Chen
Crystals 2023, 13(5), 725; https://doi.org/10.3390/cryst13050725
Available online: https://www.mdpi.com/2073-4352/13/5/725
by Guobo Wang, Hao Zhao, Yu Zhang, Jie Wang, Guanghui Zhao and Lifeng Ma
Crystals 2023, 13(5), 770; https://doi.org/10.3390/cryst13050770
Available online: https://www.mdpi.com/2073-4352/13/5/770