1. “Additive Manufacturing: An Opportunity for the Fabrication of Near-Net-Shape NiTi Implants”
by Mir Saman Safavi, Aydin Bordbar-Khiabani, Jafar Khalil-Allafi, Masoud Mozafari and Livia Visai
J. Manuf. Mater. Process. 2022, 6(3), 65; https://doi.org/10.3390/jmmp6030065
Available online: https://www.mdpi.com/2504-4494/6/3/65
2. “Causal Discovery in Manufacturing: A Structured Literature Review”
by Matej Vuković and Stefan Thalmann
J. Manuf. Mater. Process. 2022, 6(1), 10; https://doi.org/10.3390/jmmp6010010
Available online: https://www.mdpi.com/2504-4494/6/1/10
3. “Vat Photopolymerization Additive Manufacturing of Functionally Graded Materials: A Review”
by Serkan Nohut and Martin Schwentenwein
J. Manuf. Mater. Process. 2022, 6(1), 17; https://doi.org/10.3390/jmmp6010017
Available online: https://www.mdpi.com/2504-4494/6/1/17
4. “Microstructure and Mechanical Properties of Ti-6Al-4V Additively Manufactured by Electron Beam Melting with 3D Part Nesting and Powder Reuse Influences”
by Priti Wanjara, David Backman, Fatih Sikan, Javad Gholipour, Robert Amos, Prakash Patnaik and Mathieu Brochu
J. Manuf. Mater. Process. 2022, 6(1), 21; https://doi.org/10.3390/jmmp6010021
Available online: https://www.mdpi.com/2504-4494/6/1/21
5. “A Review on the Processing of Aero-Turbine Blade Using 3D Print Techniques”
by Ayush Sinha, Biswajit Swain, Asit Behera, Priyabrata Mallick, Saswat Kumar Samal, H. M. Vishwanatha and Ajit Behera
J. Manuf. Mater. Process. 2022, 6(1), 16; https://doi.org/10.3390/jmmp6010016
Available online: https://www.mdpi.com/2504-4494/6/1/16
6. “Tribological Behavior of Additively Manufactured Metal Components”
by Raj Shah, Nikhil Pai, Andreas Rosenkranz, Khosro Shirvani and Max Marian
J. Manuf. Mater. Process. 2022, 6(6), 138; https://doi.org/10.3390/jmmp6060138
Available online: https://www.mdpi.com/2504-4494/6/6/138
7. “Boronizing of CoCrFeMnNi High-Entropy Alloys Using Spark Plasma Sintering”
by Hiroaki Nakajo and Akio Nishimoto
J. Manuf. Mater. Process. 2022, 6(2), 29; https://doi.org/10.3390/jmmp6020029
Available online: https://www.mdpi.com/2504-4494/6/2/29
8. “Study of Tailored Hot Stamping Process on Advanced High-Strength Steels”
by Maria Emanuela Palmieri, Francesco Rocco Galetta and Luigi Tricarico
J. Manuf. Mater. Process. 2022, 6(1), 11; https://doi.org/10.3390/jmmp6010011
Available online: https://www.mdpi.com/2504-4494/6/1/11
9. “Moving toward Smart Manufacturing with an Autonomous Pallet Racking Inspection System Based on MobileNetV2”
by Muhammad Hussain, Tianhua Chen and Richard Hill
J. Manuf. Mater. Process. 2022, 6(4), 75; https://doi.org/10.3390/jmmp6040075
Available online: https://www.mdpi.com/2504-4494/6/4/75
10. “Effect of the Laser Processing Parameters on the Selective Laser Melting of TiC–Fe-Based Cermets”
by Himanshu S. Maurya, Lauri Kollo, Marek Tarraste, Kristjan Juhani, Fjodor Sergejev and Konda Gokuldoss Prashanth
J. Manuf. Mater. Process. 2022, 6(2), 35; https://doi.org/10.3390/jmmp6020035
Available online: https://www.mdpi.com/2504-4494/6/2/35
