Announcements

The purpose of our Best Paper Awards is to promote and recognize the most impactful contributions published within MDPI journals.

The academic editors of each journal carefully selected reviews and research papers through a rigorous judging process based on criteria such as the scientific merit, overall impact, and the quality of presentation of the papers published in the journal.

We are honored to present the winners in the “Engineering” category, who were selected amongst extensive competition, and congratulate the authors for their outstanding scientific publications.

Actuators:

• “Position Control of Pneumatic Actuators Using Three-Mode Discrete-Valued Model Predictive Control”
  by Haitao Qi, Gary M. Bone and Yile Zhang
  Actuators 2019, 8(3), 56; doi: 10.3390/act8030056
• “Review of Electrothermal Actuators and Applications”
  by Alissa Potekhina and Changhai Wang
  Actuators 2019, 8(4), 69; doi: 10.3390/act8040069

Batteries:

• “Pre-Lithiation Strategies for Rechargeable Energy Storage Technologies: Concepts, Promises and Challenges”
  by Florian Holtstiege, Peer Bärmann, Roman Nölle, Martin Winter and Tobias Placke
  Batteries 2018, 4(1), 4; doi: 10.3390/batteries4010004
• “A Critical Review of Lithium-Ion Battery Recycling Processes from a Circular Economy Perspective”
  by Omar Velázquez-Martínez, Johanna Valio, Annukka Santasalo-Aarnio, Markus Reuter and Rodrigo Serna-Guerrero
  Batteries 2019, 5(4), 68; doi: 10.3390/batteries5040068
• “Critical Review of the Use of Reference Electrodes in Li-Ion Batteries: A Diagnostic Perspective”
  by Rinaldo Raccichini, Marco Amores and Gareth Hinds
  Batteries 2019, 5(1), 12; doi: 10.3390/batteries5010012
• “Life Cycle Analysis of Lithium-Ion Batteries for Automotive Applications”
  by Qiang Dai, Jarod C. Kelly, Linda Gaines and Michael Wang
  Batteries 2019, 5(2), 48; doi 10.3390/batteries5020048
• “Design Strategies for High Power vs. High Energy Lithium Ion Cells”
  by Michael J. Lain, James Brandon and Emma Kendrick
  Batteries 2019, 5(4), 64; doi: 10.3390/batteries5040064

Chemosensors:

• “Influence of Humidity on NO₂-Sensing and Selectivity of Spray-CVD Grown ZnO Thin Film above 400 °C”
  by Roussin Lontio Fomekong and Bilge Saruhan
  Chemosensors 2019, 7(3), 42; doi: 10.3390/chemosensors7030042
• “Low Molecular Weight Fluorescent Probes (LMFPs) to Detect the Group 12 Metal Triad”
  by Ashley D. Johnson, Rose M. Curtis and Karl J. Wallace
  Chemosensors 2019, 7(2), 22; doi: 10.3390/chemosensors7020022

Journal of Marine Science and Engineering:

• “Marine Application of Fiber Reinforced Composites: A Review”
  by Felice Rubino, Antonio Nisticò, Fausto Tucci and Pierpaolo Carlone
  Mar. Sci. Eng. 2020, 8(1), 26; doi: 10.3390/jmse8010026
• “Numerical Simulation of Large Wave Heights from Super Typhoon Nepartak (2016) in the Eastern Waters of Taiwan”
  by Shih-Chun Hsiao, Hongey Chen, Han-Lun Wu, Wei-Bo Chen, Chih-Hsin Chang, Wen-Dar Guo, Yung-Ming Chen and Lee-Yaw Lin
  Mar. Sci. Eng. 2020, 8(3), 217; doi: 10.3390/jmse8030217
• “Development of Deterministic Artificial Intelligence for Unmanned Underwater Vehicles (UUV)”
  by Timothy Sands
  Mar. Sci. Eng. 2020, 8(8), 578; doi: 10.3390/jmse8080578

Lubricants:

• “Solid Lubrication with MoS₂: A Review”
  by Mohammad R. Vazirisereshk, Ashlie Martini, David A. Strubbe and Mehmet Z. Baykara
  Lubricants 2019, 7(7), 57; doi:10.3390/lubricants7070057
• “Investigations of the Friction Losses of Different Engine Concepts. Part 1: A Combined Approach for Applying Subassembly-Resolved Friction Loss Analysis on a Modern Passenger-Car Diesel Engine”
  by Christoph Knauder, Hannes Allmaier, David E. Sander and Theodor Sams
  Lubricants 2019, 7(5), 39; doi: 10.3390/lubricants7050039
• “A Discussion on Present Theories of Rubber Friction, with Particular Reference to Different Possible Choices of Arbitrary Roughness Cutoff Parameters”
  by Andrea Genovese, Flavio Farroni, Antonio Papangelo and Michele Ciavarella
  Lubricants 2019, 7(10), 85; doi: 10.3390/lubricants7100085

Micromachines:

• “4D Printing of Multi-Hydrogels Using Direct Ink Writing in a Supporting Viscous Liquid”
  by Takuya Uchida and Hiroaki Onoe
  Micromachines 2019, 10(7), 433; doi: 10.3390/mi10070433
• “Enhanced Photocatalytic Performance and Mechanism of Au@CaTiO₃ Composites with Au Nanoparticles Assembled on CaTiO₃ Nanocuboids”
  by Yuxiang Yan, Hua Yang, Zao Yi, Ruishan Li and Xiangxian Wang
  Micromachines 2019, 10(4), 254; doi: 10.3390/mi10040254
• “Three-Dimensionally Structured Flexible Fog Harvesting Surfaces Inspired by Namib Desert Beetles”
  by Jun Kyu Park and Seok Kim
  Micromachines 2019, 10(3), 201; doi: 10.3390/mi10030201

Processes:

• “Accelerating Biologics Manufacturing by Modeling or: Is Approval under the QbD and PAT Approaches Demanded by Authorities Acceptable without a Digital-Twin?”
  by Steffen Zobel-Roos, Axel Schmidt, Fabian Mestmäcker, Mourad Mouellef, Maximilian Huter, Lukas Uhlenbrock, Martin Kornecki, Lara Lohmann, Reinhard Ditz and Jochen Strube
  Processes 2019, 7(2), 94; doi: 10.3390/pr7020094
• “Multiscale Agent-Based and Hybrid Modeling of the Tumor Immune Microenvironment”
  by Kerri-Ann Norton, Chang Gong, Samira Jamalian and Aleksander S. Popel
  Processes 2019, 7(1), 37; doi: 10.3390/pr7010037
• “Dynamic Flowsheet Model Development and Sensitivity Analysis of a Continuous Pharmaceutical Tablet Manufacturing Process Using the Wet Granulation Route”
  by Nirupaplava Metta, Michael Ghijs, Elisabeth Schäfer, Ashish Kumar, Philippe Cappuyns, Ivo Van Assche, Ravendra Singh, Rohit Ramachandran, Thomas De Beer, Marianthi Ierapetritou and Ingmar Nopens
  Processes 2019, 7(4), 234; doi: 10.3390/pr7040234

Sensors:

• “A Decentralized Privacy-Preserving Healthcare Blockchain for IoT”
  by Ashutosh Dhar Dwivedi, Gautam Srivastava, Shalini Dhar and Rajani Singh
  Sensors 2019, 19(2), 326; doi: 10.3390/s19020326
• “The Progress of Glucose Monitoring—A Review of Invasive to Minimally and Non-Invasive Techniques, Devices and Sensors”
  by Wilbert Villena Gonzales, Ahmed Toaha Mobashsher and Amin Abbosh
  Sensors 2019, 19(4), 800; doi: 10.3390/s19040800
• “Contact-Based Methods for Measuring Respiratory Rate”
  by Carlo Massaroni, Andrea Nicolò, Daniela Lo Presti, Massimo Sacchetti, Sergio Silvestri and Emiliano Schena
  Sensors 2019, 19(4), 908; doi: 10.3390/s19040908

World Electric Vehicle Journal:

• “Dynamic Wireless Power Transfer Charging Infrastructure for Future EVs: From Experimental Track to Real Circulated Roads Demonstrations”
  by Stéphane Laporte, Gérard Coquery, Virginie Deniau, Alexandre De Bernardinis and Nicolas Hautière
  World Electr. Veh. J. 2019, 10(4), 84; doi: 10.3390/wevj10040084