Eng, Volume 1, Issue 2

In this paper, an analysis of the geometry, numerical modeling, and experimental verification of thermofoil heaters for low-temperature applications is presented. The research suggests a calculation procedure of the thermofoil traces’ geometry,...

Construction of civil engineering structures on or next to a slope requires special attention to meet the bearing capacity requirements of soils. In this paper, to address such a challenge, we present laboratory-scale model tests to investigate the e...

The renovation or the functional transformation of existing stock to meet the new comfort standards and energy demand reduction often requires comparing alternative technological options and designing solutions especially when it involves historical...

Non-steroidal anti-inflammatory drugs (NSAIDs) are the group of drugs most commonly used in medicine. They are available over the counter to treat fevers and pains of various origins. The clinical and pharmaceutical analysis of these drugs requires e...

The joining of two chemically dissimilar metals is a challenge due to the formation of hard and brittle intermetallic compounds (IMCs) in the diffusion layer. The joining of steel/Fe with aluminum (Al) and zirconium (Zr) alloy is particularly importa...

Scour is caused by the erosive action of flowing water, which causes materials from the bed and the banks of a river to be moved or unsettled. Hydraulic structures can be drastically impacted as a result of scour, which is why it is one of the most c...

The surface roughening and martensitic phase transformation (MPT) of SUS 304 and SUS 316 were studied through two experiments: a uniaxial tensile stress test, repeated for five cycles, and an Scanning Electron Microscope–Electron Backscaterr Di...

Flooding is one of the climatic change consequences that has become a dangerous threat to many coastal cities. Pervious concrete is considered a solution to decrease rainwater runoff and mitigate flood effects, as it allows water to percolate through...

In the context of electricity production in remote areas, the use of diesel generators, either alone or in hybridization with renewable energy sources, faces many technical problems. Indeed, the electrical instability that often characterizes the iso...

The device under investigation in this paper consists of a float used to capture tidal energy, which is tethered by multiple flexible cables to a large barge-like reactor. The proposed float is made of a continuously wound glass-reinforced composite...