Calculation of Temperature Distribution on a Crown Tooth by Using Three-Dimensional Finite Element Method

H. Aykul; M. Toparlı; N. S. Köksal

doi:10.3390/mca4010031

You are currently viewing a new version of our website. To view the old version click .

Mathematical and Computational Applications is published by MDPI from Volume 21 Issue 1 (2016). Previous articles were published by another publisher in Open Access under a CC-BY (or CC-BY-NC-ND) licence, and they are hosted by MDPI on mdpi.com as a courtesy and upon agreement with Association for Scientific Research (ASR).

Article

1 April 1999

Calculation of Temperature Distribution on a Crown Tooth by Using Three-Dimensional Finite Element Method

and

Department of Mechanical Engineering, Faculty of Engineering, Celal Bayar University, Muradiye, Manisa, Türkiye

Department of Metallurgical and Materials Engineering, Faculty of Engineering, Dokuz Eylül University, Bornova- İzmir, Türkiye

Authors to whom correspondence should be addressed.

Math. Comput. Appl.1999, 4(1), 31-37;https://doi.org/10.3390/mca4010031

Version Notes

Order Reprints

Abstract

The finite element was used to temperature changes with time to Au-AgPd alloy and porcelain crowns in three dimensional models of average maxillary second premolar. Temperature changes some critical nodes were calculated as a result of hot/cold liquid. Calculation programs were prepared by authors using FORTRAN 77. The tooth was assumed isotropic, homogenous, elastic and unsymmetric.

Article Metrics

Citations

Article Access Statistics

Journal Statistics

Multiple requests from the same IP address are counted as one view.

E2/M1 Multipole Mixing Ratios of 162Dy Nucleus in Rotation Vibration Model

Elastic-Plastic and Residual Stresses in Clamped Thermoplastic Composite Laminates Loaded Transversely