Next Issue
Volume 2, December
Previous Issue
Volume 2, June
 
 

Processes, Volume 2, Issue 3 (September 2014) – 8 articles , Pages 526-693

  • Issues are regarded as officially published after their release is announced to the table of contents alert mailing list.
  • You may sign up for e-mail alerts to receive table of contents of newly released issues.
  • PDF is the official format for papers published in both, html and pdf forms. To view the papers in pdf format, click on the "PDF Full-text" link, and use the free Adobe Reader to open them.
Order results
Result details
Section
Select all
Export citation of selected articles as:
15006 KiB  
Article
An MINLP Model that Includes the Effect of Temperature and Composition on Property Balances for Mass Integration Networks
by Arturo Jiménez-Gutiérrez, María Del Carmen Sandate-Trejo and Mahmoud M. El-Halwagi
Processes 2014, 2(3), 675-693; https://doi.org/10.3390/pr2030675 - 18 Aug 2014
Cited by 3 | Viewed by 4424
Abstract
The synthesis of water networks based on properties has commonly ignored the effect of temperature on the property balances that are part of the formulation. When wide differences of temperatures are observed within the process, such an effect might yield significant errors in [...] Read more.
The synthesis of water networks based on properties has commonly ignored the effect of temperature on the property balances that are part of the formulation. When wide differences of temperatures are observed within the process, such an effect might yield significant errors in the application of conventional property balances. In this work, a framework for the development of water networks that include temperature effects on property balances is presented. The approach is based on the inclusion of constants in the property operators that are commonly used to carry out the property balances. An additional term to take care of composition effects is also included. The resulting approach is embedded into a formulation based on a mixed-integer nonlinear programming model for the design of water networks. A case study is presented that shows that the proposed approach yields an improvement in the prediction of the resulting properties for the integrated network, thus affecting the optimal solution. Full article
Show Figures

Figure 1

2598 KiB  
Article
A Novel Through-Thickness Perfusion Bioreactor for the Generation of Scaffold-Free Tissue Engineered Cartilage
by Eric Gilbert, Mark Mosher, Anuhya Gottipati and Steven Elder
Processes 2014, 2(3), 658-674; https://doi.org/10.3390/pr2030658 - 13 Aug 2014
Cited by 9 | Viewed by 8393
Abstract
The objective of this study was to characterize our designed through-thickness perfusion bioreactor which could generate large scaffold-free tissue engineered cartilage constructs. The hypothesis being that through-thickness perfusion could accelerate maturation of scaffold-free tissue engineered cartilage, grown in transwell culture inserts large enough [...] Read more.
The objective of this study was to characterize our designed through-thickness perfusion bioreactor which could generate large scaffold-free tissue engineered cartilage constructs. The hypothesis being that through-thickness perfusion could accelerate maturation of scaffold-free tissue engineered cartilage, grown in transwell culture inserts large enough to repair typical size chondral lesions in the human knee. Internal cell culture media temperature and pH were examined over time, upon implementation of the bioreactor perfusion system inside a CO2 incubator, to ensure adequate regulation conducive to cell viability. Results indicate that temperature and pH both equilibrate within approximately 3 h. The bioreactor was tested for its efficacy to support formation of 4.5 cm2 constructs by porcine neonatal chondrocytes. Tests were conducted under three conditions: immediate perfusion with flow from bottom to top, immediate perfusion with media flow from top to bottom, and bottom to top perfusion after four weeks of static culture, giving the cells time to self-aggregate into a consolidated construct prior to perfusion. The best cell culture results were obtained when perfusion was delayed for four weeks relative to the immediate perfusion of the other methods, and this should be further investigated. Full article
(This article belongs to the Special Issue Design of Bioreactor Systems for Tissue Engineering)
Show Figures

Graphical abstract

1240 KiB  
Article
Analysis of Gene Expression Signatures for Osteogenic 3D Perfusion-Bioreactor Cell Cultures Based on a Multifactorial DoE Approach
by Ioannis Papantoniou, Maarten Sonnaert, Toon Lambrechts, Jean-Marie Aerts, Lies Geris, Frank P. Luyten and Jan Schrooten
Processes 2014, 2(3), 639-657; https://doi.org/10.3390/pr2030639 - 8 Aug 2014
Cited by 8 | Viewed by 8278
Abstract
The use of multifactorial design of experiments (DoE) in tissue engineering bioprocess development will contribute to the robust manufacturing of tissue engineered constructs by linking their quality characteristics to bioprocess operating parameters. In this work, perfusion bioreactors were used for the in vitro [...] Read more.
The use of multifactorial design of experiments (DoE) in tissue engineering bioprocess development will contribute to the robust manufacturing of tissue engineered constructs by linking their quality characteristics to bioprocess operating parameters. In this work, perfusion bioreactors were used for the in vitro culture and osteogenic differentiation of human periosteum-derived cells (hPDCs) seeded on three-dimensional titanium (Ti) alloy scaffolds. A CaP-supplemented medium was used to induce differentiation of the cultured hPDCs. A two-level, three-factor fractional factorial design was employed to evaluate a range of bioreactor operating conditions by changing the levels of the following parameters: flow rate (0.5–2 mL/min), cell culture duration (7–21 days) and cell seeding density (1.5 × 103–3 × 103 cells/cm2). This approach allowed for evaluating the individual impact of the aforementioned process parameters upon a range of genes that are related to the osteogenic lineage, such as collagen type I, alkaline phosphatase, osterix, osteopontin and osteocalcin. Furthermore, by overlaying gene-specific response surfaces, an integrated operating process space was highlighted within which predetermined values of the six genes of interest (i.e., gene signature) could be minimally met over the course of the bioreactor culture time. Full article
(This article belongs to the Special Issue Design of Bioreactor Systems for Tissue Engineering)
Show Figures

Figure 1

683 KiB  
Article
Light-Induced Production of An Antibody Fragment and Malaria Vaccine Antigen from Chlamydomonas reinhardtii
by Neera Munjal, Andrea Juliana Garzon-Sanabria, Katelyn Wilson Quinones, James Gregory and Zivko L. Nikolov
Processes 2014, 2(3), 625-638; https://doi.org/10.3390/pr2030625 - 7 Aug 2014
Cited by 10 | Viewed by 8801
Abstract
The eukaryotic green alga, Chlamydomonas reinhardtii, is a unique expression platform that can efficiently express complex therapeutic proteins. However, demonstrating that therapeutic molecules can be produced in quantifiable levels is essential to establish the potential of the C. reinhardtii expression system. Thus, [...] Read more.
The eukaryotic green alga, Chlamydomonas reinhardtii, is a unique expression platform that can efficiently express complex therapeutic proteins. However, demonstrating that therapeutic molecules can be produced in quantifiable levels is essential to establish the potential of the C. reinhardtii expression system. Thus, the objective of this investigation was to determine the process conditions that could maximize C. reinhardtii biomass accumulation and induced-production of the two recombinant proteins, a single chain fragment antibody molecule (αCD22 scFv) and malaria vaccine antigen (Pfs25), produced in the chloroplast of C. reinhardtii. To achieve a higher production of recombinant proteins, cultivation variables of C. reinhardtii, such as mixing, light-induction time and intensity, nutrient depletion and culture age, were investigated and optimized. The optimal light-induction time was 24 h at a light intensity of 300 μmol m−2 s−1. Replacement of the culture media in the late exponential growth with fresh media was beneficial to the accumulation of recombinant proteins. Optimization led to increases in the accumulation of recombinant proteins by six-fold and the recombinant protein fraction in the extracted soluble protein by two-fold. Full article
(This article belongs to the Special Issue Advances in Bioseparation Engineering)
Show Figures

Figure 1

630 KiB  
Review
The Impact of Harvesting, Storage and Processing Factors on Health-Promoting Phytochemicals in Berries and Fruits
by Anna Kårlund, Ulvi Moor, Mari Sandell and Reijo O Karjalainen
Processes 2014, 2(3), 596-624; https://doi.org/10.3390/pr2030596 - 5 Aug 2014
Cited by 56 | Viewed by 8010
Abstract
Increasing epidemiological and experimental data now emphasize that a diet rich in vegetables and fruits confers many health benefits. Functional products containing elevated levels of bioactive compounds are attracting considerable attention due to their potential to lower the risk of chronic diseases and [...] Read more.
Increasing epidemiological and experimental data now emphasize that a diet rich in vegetables and fruits confers many health benefits. Functional products containing elevated levels of bioactive compounds are attracting considerable attention due to their potential to lower the risk of chronic diseases and their associated huge healthcare costs. On a global scale, there is an increasing demand for berries and fruits, since they are natural polyphenol-rich raw material to be incorporated into functional foods, nutraceuticals and pharmaceuticals. This is a major challenge for both industry and horticultural experts, because the content of health-promoting compounds in plants varies widely not only in different plant species, but also between cultivars. The content is also significantly affected by harvesting, storage and processing factors. This review summarizes the recent data and clarifies the main contributors of harvesting time, various storage conditions and post-harvest procedures, such as temperature management, controlled atmosphere, 1-MCP, calcium and plant activators, as ways to influence health-promoting compounds in fruits. Furthermore, the ways processing factors, e.g., enzymatic treatment, pressing, clarification, temperature, pressure and fermentation, can influence the levels of polyphenols and vitamins in berries and soft fruits will be discussed. Finally, strategies for preventing the decline of health-promoting compounds in fruits during long-term storage will be assessed in light of recent scientific progress and modern methods, which preserve the levels of polyphenols, will be highlighted. Full article
1251 KiB  
Article
Mathematical Modeling and Analysis of Crosstalk between MAPK Pathway and Smad-Dependent TGF-β Signal Transduction
by Ji Liu, Wei Dai and Juergen Hahn
Processes 2014, 2(3), 570-595; https://doi.org/10.3390/pr2030570 - 4 Aug 2014
Cited by 3 | Viewed by 10678
Abstract
Broad evidence exists for cross talk between the Mitogen-activated protein kinases (MAPK) pathway and Smad-dependent TGF-β signal transduction. A variety of studies, oftentimes involving different cell types, have identified several potential mechanisms for the crosstalk. However, there is no clear consensus on the [...] Read more.
Broad evidence exists for cross talk between the Mitogen-activated protein kinases (MAPK) pathway and Smad-dependent TGF-β signal transduction. A variety of studies, oftentimes involving different cell types, have identified several potential mechanisms for the crosstalk. However, there is no clear consensus on the actual mechanism(s) responsible for the crosstalk. This work develops a model of the pathway, including several hypothesized crosstalk mechanisms, and discusses which of the potential mechanisms can appropriately describe observed behaviors. Simulation results show a good agreement of the findings with results reported in the literature. Full article
(This article belongs to the Special Issue Modeling and Analysis of Signal Transduction Networks)
Show Figures

Figure 1

4367 KiB  
Review
Design Criteria for Generating Physiologically Relevant In Vitro Models in Bioreactors
by Giorgio Mattei, Serena Giusti and Arti Ahluwalia
Processes 2014, 2(3), 548-569; https://doi.org/10.3390/pr2030548 - 25 Jul 2014
Cited by 71 | Viewed by 12693
Abstract
In this paper, we discuss the basic design requirements for the development of physiologically meaningful in vitro systems comprising cells, scaffolds and bioreactors, through a bottom up approach. Very simple micro- and milli-fluidic geometries are first used to illustrate the concepts, followed by [...] Read more.
In this paper, we discuss the basic design requirements for the development of physiologically meaningful in vitro systems comprising cells, scaffolds and bioreactors, through a bottom up approach. Very simple micro- and milli-fluidic geometries are first used to illustrate the concepts, followed by a real device case-study. At each step, the fluidic and mass transport parameters in biological tissue design are considered, starting from basic questions such as the minimum number of cells and cell density required to represent a physiological system and the conditions necessary to ensure an adequate nutrient supply to tissues. At the next level, we consider the use of three-dimensional scaffolds, which are employed both for regenerative medicine applications and for the study of cells in environments which better recapitulate the physiological milieu. Here, the driving need is the rate of oxygen supply which must be maintained at an appropriate level to ensure cell viability throughout the thickness of a scaffold. Scaffold and bioreactor design are both critical in defining the oxygen profile in a cell construct and are considered together. We also discuss the oxygen-shear stress trade-off by considering the levels of mechanical stress required for hepatocytes, which are the limiting cell type in a multi-organ model. Similar considerations are also made for glucose consumption in cell constructs. Finally, the allometric approach for generating multi-tissue systemic models using bioreactors is described. Full article
(This article belongs to the Special Issue Design of Bioreactor Systems for Tissue Engineering)
Show Figures

Graphical abstract

11168 KiB  
Article
A Novel Seeding and Conditioning Bioreactor for Vascular Tissue Engineering
by Julia Schulte, Anja Friedrich, Trixi Hollweck, Fabian König, Markus Eblenkamp, Andres Beiras-Fernandez, Cornelia Fano, Christian Hagl and Bassil Akra
Processes 2014, 2(3), 526-547; https://doi.org/10.3390/pr2030526 - 8 Jul 2014
Cited by 7 | Viewed by 10877
Abstract
Multiple efforts have been made to develop small-diameter tissue engineered vascular grafts using a great variety of bioreactor systems at different steps of processing. Nevertheless, there is still an extensive need for a compact all-in-one system providing multiple and simultaneous processing. The aim [...] Read more.
Multiple efforts have been made to develop small-diameter tissue engineered vascular grafts using a great variety of bioreactor systems at different steps of processing. Nevertheless, there is still an extensive need for a compact all-in-one system providing multiple and simultaneous processing. The aim of this project was to develop a new device to fulfill the major requirements of an ideal system that allows simultaneous seeding, conditioning, and perfusion. The newly developed system can be actuated in a common incubator and consists of six components: a rotating cylinder, a pump, a pulse generator, a control unit, a mixer, and a reservoir. Components that are in direct contact with cell media, cells, and/or tissue allow sterile processing. Proof-of-concept experiments were performed with polyurethane tubes and collagen tubes. The scaffolds were seeded with fibroblasts and endothelial cells that were isolated from human saphenous vein segments. Scanning electron microscopy and immunohistochemistry showed better seeding success of polyurethane scaffolds in comparison to collagen. Conditioning of polyurethane tubes with 100 dyn/cm2 resulted in cell detachments, whereas a moderate conditioning program with stepwise increase of shear stress from 10 to 40 dyn/cm2 induced a stable and confluent cell layer. The new bioreactor is a powerful tool for quick and easy testing of various scaffold materials for the development of tissue engineered vascular grafts. The combination of this bioreactor with native tissue allows testing of medical devices and medicinal substances under physiological conditions that is a good step towards reduction of animal testing. In the long run, the bioreactor could turn out to produce tissue engineered vascular grafts for human applications “at the bedside”. Full article
(This article belongs to the Special Issue Design of Bioreactor Systems for Tissue Engineering)
Show Figures

Figure 1

Previous Issue
Next Issue
Back to TopTop