Next Article in Journal
Continuous Pelletization – Effect of Process Parameters
Previous Article in Journal
Role of the Surface Free Energy in the Preparation of Granules and in the Selection of a Suitable Device
Article Menu

Article Versions

Export Article

Scientia Pharmaceutica is published by MDPI from Volume 84 Issue 3 (2016). Articles in this Issue were published by another publisher in Open Access under a CC-BY (or CC-BY-NC-ND) licence. Articles are hosted by MDPI on as a courtesy and upon agreement with Austrian Pharmaceutical Society (Österreichische Pharmazeutische Gesellschaft, ÖPhG).
Open AccessConference Report
Sci. Pharm. 2010, 78(3), 638;

Fluidized Hot Melt Granulation: Influence of Process and Formulation Parameters

Department of Pharmaceutical Technology, Faculty of Pharmacy, University of Belgrade, Serbia
Author to whom correspondence should be addressed.
Received: 12 July 2010 / Accepted: 12 July 2010 / Published: 12 July 2010
PDF [164 KB, uploaded 10 October 2016]


Introduction: Hot-melt granulation techniques have received increasing attention due to the significant advantages compared to the conventional granulation methods. [...]
This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0).

Share & Cite This Article

MDPI and ACS Style

MAŠIĆ, I.; STOJKOVIĆ, A.; PAROJČIĆ, J.; ĐURIĆ, Z. Fluidized Hot Melt Granulation: Influence of Process and Formulation Parameters. Sci. Pharm. 2010, 78, 638.

Show more citation formats Show less citations formats

Article Metrics

Article Access Statistics



[Return to top]
Sci. Pharm. EISSN 2218-0532 Published by MDPI AG, Basel, Switzerland RSS E-Mail Table of Contents Alert
Back to Top