The authors wish to make the following corrections to this paper [1]:
Figure 8 in Section 4 (Discussion) incorrectly cited data taken from the literature. The reference to the literature results should have been [13], as amended below in Figure 8:
Figure 8.
Adhesion strength in terms of % of mill annealed Ti6Al4V’s ultimate tensile strength (UTS), before and after thermal treatments, and comparison with the literature. (Note: IF-Interface Failure, and CF-Cohesion Failure).
We will update the article and the original version will remain available on the article webpage.
Reference
- Dibakor, B.; Zhang, X. Effect of Post-Deposition Solution Treatment and Ageing on Improving Interfacial Adhesion Strength of Cold Sprayed Ti6Al4V Coatings. Metals 2021, 11, 2038. [Google Scholar] [CrossRef]
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations. |
© 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).