Error in Figure
In the original article [1], there was a mistake in Figure 6 as published. Subfigure 6b was mistakenly replaced with subfigure 5d. The corrected Figure 6 appears below. The authors apologize for any inconvenience caused and state that the scientific conclusions are unaffected. The original article has been updated.
Figure 6.
(a) Schematic showing a magnified view of the notch in a single-edge notch specimen and the definition of the crack-tip opening displacement, . (b) Variation in the normalized critical crack-tip opening displacement, , with average prior austenite grain size, .
Reference
- Zheng, X.; Ghassemi-Armaki, H.; Hartwig, K.T.; Srivastava, A. Correlating Prior Austenite Grain Microstructure, Microscale Deformation and Fracture of Ultra-High Strength Martensitic Steels. Metals 2021, 11, 1013. [Google Scholar] [CrossRef]
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations. |
© 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).