Next Article in Journal
Dynamic Analysis of a High-Contact-Ratio Spur Gear System with Localized Spalling and Experimental Validation
Next Article in Special Issue
Surface Roughness Improvement by Sliding Friction Burnishing of Parts Produced by Selective Laser Melting of Ti6Al4V Titanium Alloy
Previous Article in Journal
Numerical Investigation of Influence of Fluid Rate, Fluid Viscosity, Perforation Angle and NF on HF Re-Orientation in Heterogeneous Rocks Using UDEC T-W Method
 
 
Article

Article Versions Notes

Machines 2022, 10(2), 153; https://doi.org/10.3390/machines10020153
Action Date Notes Link
article xml file uploaded 18 February 2022 10:54 CET Original file -
article xml uploaded. 18 February 2022 10:54 CET Update https://www.mdpi.com/2075-1702/10/2/153/xml
article pdf uploaded. 18 February 2022 10:54 CET Version of Record https://www.mdpi.com/2075-1702/10/2/153/pdf
article html file updated 18 February 2022 10:56 CET Original file -
article html file updated 31 July 2022 22:22 CEST Update https://www.mdpi.com/2075-1702/10/2/153/html
Back to TopTop