In the original publication [1], there were two mistakes:
(1) The original Table 1 misses a row concerning the title of variables. The corrected Table 1. Classification result of boreholes by seepage severity appears below.
Table 1.
Classification result of boreholes by seepage severity.
(2) There was a citation format error. A correction has been made to the 2nd paragraph of the Conclusion section:
Using well-logging of natural tracers, boreholes are categorized into four classes based on hydraulic behavior. Classes 1 and 2 had strong connectivity and a severe leakage problem compared to Classes 3 and 4, which had limited to negligible seepage. The application of the SBDT to five boreholes revealed the following: (1) P3-5 is confirmed to have weak evidence of leakage; (2) The vertical velocity of P3-8 and P9-7 is more than 1.66 cm/s and 0.95 cm/s, respectively; (3) In boreholes P9-9 and P9-12, the mean velocities of the tests are 0.26 and 0.51 cm/s, respectively; and (4) For P9-12, an extra leakage path is located at a depth of 450 cm, which is easy to miss in the curves of the natural tracers. Taken together, these findings provide further insights into the seepage problem, which are not evident when using the conventional tracer method, as described in Huang et al. [21].
The authors apologize for any inconvenience caused, and state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.
Reference
- Qiu, H.; Hu, R.; Huang, Y.; Gwenzi, W. Detection and Quantification of Dam Leakages Based on Tracer Tests: A Field Case Study. Water 2022, 14, 1448. [Google Scholar] [CrossRef]
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations. |
© 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).