In the original article [1], there was a mistake in the legend for Figure 8. The primary y-axis label was incorrect. It should read “Brine Br (ppm)”. The species Li and I are represented on the secondary y-axis to the right and should not have been included on the primary y-axis to the left of the figure. The correct legend/figure appears below. The authors apologize for any inconvenience caused and state that the scientific conclusions are unaffected. The original article has been updated.
Figure 8.
Concentration of bromide, iodide and lithium in brine as a function of PW evaporation.
Reference
- Ghurye, G.L.; Mishra, D.; Lucas, L. Thermal Desalination of Produced Water—An Analysis of the Partitioning of Constituents into Product Streams and Its Implications for Beneficial Use Outside the O&G Industry. Water 2021, 13, 1068. [Google Scholar] [CrossRef]
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations. |
© 2021 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).