Correction: Chen et al. The Effect of High-Quality RDX on the Safety and Mechanical Properties of Pressed PBX. Materials 2022, 15, 1185

Shixiong Chen; Hua Qian; Bingxin Liu; Feiyang Xu; Jiuhou Rui; Dabin Liu

doi:10.3390/ma15062315

,

and

¹

School of Chemical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China

²

State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing 100081, China

^*

Authors to whom correspondence should be addressed.

Materials2022, 15(6), 2315;https://doi.org/10.3390/ma15062315

Version Notes

Order Reprints

Error in Figure

In the original publication [1], there was a mistake in **Figure 1** as published. **The number 10 in Figure 1a needs to be replaced with 100**. The corrected **Figure 1** appears below.

Figure 1. Apparent morphology images of different RDX crystals: (a) raw RDX (400×), (b) H-RDX (200×), (c) raw RDX (1500×), and (d) H-RDX (2000×).

The authors apologize for any inconvenience caused and state that the scientific conclusions are unaffected. The original publication has also been updated.

Reference

Chen, S.; Qian, H.; Liu, B.; Xu, F.; Rui, J.; Liu, D. The Effect of High-Quality RDX on the Safety and Mechanical Properties of Pressed PBX. Materials 2022, 15, 1185. [Google Scholar] [CrossRef]

Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

© 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).

Correction: Chen et al. The Effect of High-Quality RDX on the Safety and Mechanical Properties of Pressed PBX. Materials 2022, 15, 1185

Reference

Article Metrics

Citations

Article Access Statistics