“Applications of Porous Nanotubes” is an open Special Issue of Materials, which aims to publish original contributions and review papers on new fundamental and applied aspects of porous nanomaterials, and to investigate their properties and underlying mechanisms for development of various porous media with a desired functionality.
Nanomaterials are of great interest due to their specific and fascinating properties, which are superior to their bulk counterparts. Porous nanotubes are a promising type of nanomaterials with exceptional chemical and physical characteristics, owing to their unique quasi one-dimensional geometric features, which makes them of particular interest. Carbon-based nanotube variants were the first of this class of materials [1]. Single- or multicomponent porous nanotubes made of various materials such as metals, metal oxides, nitrides, chalcogenides, etc. have gained much attention in the past couple of decades, since they possess enhanced sensing ability, catalytic activity, and photovoltaic behavior. For instance, metal-oxide nanotubes can be used for a wide range of applications, such as selective biological and chemical sensors, solar cells and photocatalysts [2].
There are two main approaches to obtaining nanotubes: directed (soft and hard template) and non-directed (self-organization) methods. When developing a synthetic method for the fabrication and/or functionalization of porous nanotubes, the most important issue that one needs to address is the simultaneous control over dimensions, morphology, monodispersity, and chemical purity. These characteristics largely determine potential applications of nanotubes as catalysts, gas sensors, solar cells, supercapacitors, biological sensors, carriers for drug delivery, etc. In particular, different synthetic conditions of Ti-based nanotubes, which are promising as effective medical implants, may strongly affect their properties such as biocompatibility, and resistance to bio-corrosion, which makes the development of proper technological routes a complex and important issue [3].
The research interest of the section “Applications of Porous Nanotubes” includes various topics, ranging from, but not limited to, the fabrication of nanotubes of various composition using versatile synthetic approaches and their application in sensing, catalysis, energy harvesting, electronic devices, and biomedicine.
Author Contributions
Conceptualization, D.E. and D.K.; supervision, D.E.; project administration, D.E. and D.K.; funding acquisition, D.K.; writing—original draft preparation, D.E.; writing—review and editing, D.K. All authors have read and agreed to the published version of the manuscript.
Funding
The work was financed in the framework of the state budget agreement (0040-2019-0012).
Acknowledgments
We would like to thank all the authors and the reviewers. Special thanks to Editor-in-Chief and all the staff of the Materials Editorial Office for their great support during the preparation of this Special Issue.
Conflicts of Interest
The author declares no conflict of interest.
References
- Iijima, S. Helical microtubules of graphitic carbon. Nature 1991, 354, 56–58. [Google Scholar] [CrossRef]
- Lee, M.; Kim, T.W.; Bae, C.; Shin, H.; Kim, J. Fabrication and Applications of Metal-oxide Nanotubes. J. Mater. 2010, 62, 44–49. [Google Scholar] [CrossRef]
- Sarraf, M.; Nasiri-Tabrizi, B.; Yeong, C.H.; Hosseini, H.R.M.; Saber-Samandari, S.; Basirun, W.J.; Tsuzuki, T. Mixed oxide nanotubes in nanomedicine: A dead-end or a bridge to the future? Ceram. Int. 2021, 47, 2917–2948. [Google Scholar] [CrossRef] [PubMed]
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations. |
© 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).