Search Results (197)

Background: Biomedical device-associated infections pose major challenges in surgical care, particularly in hernia repair where polypropylene (PP) meshes and sutures are prone to bacterial colonization and biofilm formation. The limitations of antibiotic resistance and toxicity warrants the need of developing innovative antibacterial strategies. Methods: We developed a composite coating of hydroxypropyl methylcellulose (HPMC) and zinc oxide nanorods (ZnO NP) synthesized via thermal decomposition. This coating was applied to PP meshes and sutures to enhance anti-adhesive properties. The study evaluated surface hydrophilicity through water contact angles, estimation of Zn²⁺ ions using inductively coupled plasma–mass spectrometry (ICP-MS), and long-term efficacy over six months. Safety was assessed via systemic toxicity studies in murine models. Results: The ZnO NPs exhibited potent antibacterial efficacy, achieving up to 99.999% killing against Klebsiella pneumoniae. When applied as an HPMC-ZnO coating, PP meshes and sutures demonstrated enhanced hydrophilicity, reducing water contact angles by ~41° and facilitating prevention of bacterial adhesion. The coated meshes inhibited bacterial attachment by 83% (Escherichia coli), 60% (Pseudomonas aeruginosa), 99.6% (K. pneumoniae), and 99% (Staphylococcus aureus). Similarly, coated sutures reduced adhesion by 67–96% across these strains. Long-term storage studies showed retained antibiofilm efficacy for up to six months. In vivo assessments indicated negligible systemic toxicity of ZnO NPs in murine models. Conclusions: Collectively, these findings highlight HPMC-ZnO NPs coatings as a safe, durable, and effective strategy to functionalize PP-based meshes and sutures, reducing the risk of surgical site infections and demonstrating the potential for broader biomedical applications. Full article

Room-temperature (RT) gas sensors for nitrogen dioxide (NO₂) detection face persistent challenges, including reliance on high operating temperatures and inefficient charge carrier utilization under UV activation. To address these limitations, we engineered a p-n nano-heterojunction (NHJ) gas sensor by integrating p-type nickel oxide (NiO) nanoparticles onto n-type zinc oxide (ZnO) nanorods. This architecture leverages UV-driven carrier generation and interfacial electric fields at the NHJ to suppress recombination, enabling unprecedented RT performance. By optimizing thermal annealing conditions, we achieved a well-defined heterojunction with uniform NiO distribution on the top of the ZnO nanorods, validated through electron microscopy and X-ray photoelectron spectroscopy. The resulting sensor exhibits a 5.4-fold higher normalized response to 50 ppm NO₂ under 365 nm UV illumination compared to pristine ZnO, alongside rapid recovery and stable cyclability. The synergistic combination of UV-assisted carrier generation and heterojunction-driven interfacial modulation offers a promising direction for next-generation RT gas sensors aimed at environmental monitoring. Full article

We present a novel approach for the synthesis of crystalline zinc oxide (ZnO) nanopowders based on the direct interaction of high-power microwave radiation with a zinc wire in atmospheric air. The process utilizes a localized microwave-induced plasma to rapidly vaporize the metal, followed by oxidation and condensation, resulting in the deposition of ZnO nanostructures on glass substrates. Plasma diagnostics confirmed the generation of a plasma in local thermodynamic equilibrium (LTE), characterized by high electron temperatures. Optical emission spectroscopy highlighted atomic species such as ZnI, ZnII, OI, OII, and NI, as well as molecular species including OH, N₂ and O₂. The spectral fingerprint of N₂ molecules reveals the presence of high energy electrons, while the persistent occurrence of OI and OII emission lines throughout the plasma spectrum reveals that ZnO formation is mainly driven by the continuous dissociation of molecular oxygen. High crystallinity and chemical purity of the synthesized ZnO nanoparticles were confirmed through SEM, TEM, XRD, FTIR, and EDX characterization. The resulting nanorods exhibit a rod-like morphology, with diameters ranging from 12 nm to 63 nm and lengths between 58 nm and 354 nm. This low-cost, high-yield method offers a scalable and efficient route for metal oxide nanomaterial fabrication via direct metal–microwave coupling, providing a promising alternative to conventional physical and chemical synthesis techniques. Full article

This investigation aims to evaluate the biocompatibility and assess the cytotoxicity of synthesized ZnO/Ag heterojunction nanorods with commercially available root canal sealers in India. Among the commercially available root canal sealers, zinc oxide (ZnO) eugenol-based sealers are widely utilized as per Grossmann’s requirements. However, these ZnO eugenol-based sealers often experience solubility issues and tissue reactions in contact with periapical tissues. To overcome the inexplicable reactivity of ZnO eugenol-based sealers, nano ZnO and nano ZnO/Ag heterojunction materials have been developed via a wet-chemical approach and studied to assess their biocompatibility and cytotoxicity. The findings of our study revealed that nano ZnO/Ag heterojunction material possesses a higher degree of biocompatibility and low cytotoxicity as compared to conventional ZnO eugenol-based sealers, attributed to its high surface-to-volume ratio, the enhanced penetration of nanosized sealers into dentinal tubules, and the synergistic spillover sensitization effect of nano ZnO combined with Ag nanoclusters. From this comparative evaluation of root canal sealers, the usage of nano ZnO/Ag heterojunction materials was found to be significantly advantageous over commercial zinc oxide eugenol-based sealers and may find profound usage with a long shelf-life. Full article

In this work, ZnO nanorods were grown on vertically aligned and randomly aligned silica nanosprings using the hydrothermal method. The initial step was the deposition of a ZnO seed layer by atomic layer deposition to promote nucleation. For hydrothermal growth, equimolar (0.2 M) solutions of Zinc nitrate hexahydrate and hexamethylene tetraamine prepared in DI water were used. The ZnO NR grown on the VANS were flower-like clusters, while for the RANS, the ZnO NR grew radially outward from the individual nanosprings. The lengths and diameters of ZnO NR grown on VANS and RANS were 175 and 650 nm, and 35 and 250 nm, respectively. Scanning electron microscopy confirmed the formation of ZnO nanorods, while X-ray diffraction and Raman spectroscopy verified that they have a hexagonal wurtzite crystal structure with preferential growth along the c-axis. X-ray photoelectron spectroscopy, in conjunction with in vacuo annealing, was used to examine the surface electronic structure of ZnO nanorods and defect healing. Photoluminescence of the ZnO nanorods indicates high crystal quality, as inferred from the weak defect band relative to strong excitonic band edge emission. Full article

Brain ischemia is a severe condition caused by reduced cerebral blood flow, leading to the disruption of ion gradients in brain tissue. This imbalance triggers spreading depolarizations, which are waves of neuronal and glial depolarization propagating through the gray matter. Microelectrode arrays (MEAs) are essential for real-time monitoring of these electrophysiological processes both in vivo and in vitro, but their sensitivity and signal quality are critical for accurate detection of extracellular brain activity. In this study, we evaluate the performance of a flexible microelectrode array based on gold-coated zinc oxide nanorods (ZnO NRs), referred to as nano-fMEA, specifically for high-fidelity electrophysiological recording under pathological conditions. Acute mouse brain slices were tested under two ischemic models: oxygen–glucose deprivation (OGD) and hyperkalemia. The nano-fMEA demonstrated significant improvements in event detection rates and in capturing subtle fluctuations in neural signals compared to flat fMEAs. This enhanced performance is primarily attributed to an optimized electrode–tissue interface that reduces impedance and improves charge transfer. These features enabled the nano-fMEA to detect weak or transient electrophysiological events more effectively, making it a valuable platform for investigating neural dynamics during metabolic stress. Overall, the results underscore the promise of ZnO NRs in advancing electrophysiological tools for neuroscience research. Full article

This research examines the effect of annealing temperature on the growth orientation of zinc oxide (ZnO) nanorods and its subsequent influence on NO₂ gas sensing efficiency. Zinc oxide (ZnO) nanorods were synthesized using the chemical bath deposition method, followed by annealing at 300, 400, and 500 °C. Diffraction analysis confirmed that both non-annealed and annealed ZnO nanorods crystallize in a hexagonal wurtzite structure. However, increasing the annealing temperature shifts the growth orientation from the c-axis (002) toward the (100) and (101) directions. Microscopy images (FE-SEM) revealed a reduction in nanorod diameter as the annealing temperature increases. Optical characterization using UV–visible and photoluminescence spectroscopy indicated shifts in the band gap energy and emission properties. Contact angle measurements demonstrated the hydrophobic nature of the films. Gas sensing tests at 200 °C revealed that the ZnO thin film annealed at 400 °C achieved the highest NO₂ response of 5.88%. The study highlights the critical role of annealing in modifying the crystallinity, growth orientation, and defect states of ZnO thin films, ultimately enhancing their NO₂ detection capability. Full article

Wearable sensors have rapidly advanced, enabling applications such as human activity monitoring, electronic skin, and biomimetic robotics. To meet the growing demands of these applications, multifunctional sensing has become essential for wearable devices. However, most existing studies predominantly focus on enhancing single-function sensing capabilities. This study introduces a multifunctional sensor that combines high stretchability for strain and pressure detection with ultraviolet (UV) sensing capability. To achieve simultaneous detection of strain, pressure, and UV light, a multi-sensing approach was employed: a capacitive method for strain and pressure detections and a resistive method utilizing a pn-heterojunction diode for UV detection. In the capacitive method, polyaniline (PANI) served as parallel-plate electrodes, while silicon-based elastomer acted as the dielectric layer. This configuration enabled up to 100% elongation and enhanced operational stability through encapsulation. The sensor demonstrated a strong linear relationship between capacitance value changes reasonably based on the area of PANI, and showed a good linearity with an R-squared value of 0.9918. It also detected pressure across a wide range, from low (0.4 kPa) to high (9.4 kPa). Furthermore, for wearable applications, the sensor reliably captured capacitance variations during finger bending at different angles. For UV detection, a pn-heterojunction diode composed of p-type silicon and n-type zinc oxide nanorods exhibited a rapid response time of 6.1 s and an on/off ratio of 13.8 at −10 V. Durability under 100% tensile strain was confirmed through Von Mises stress calculations using finite element modeling. Overall, this multifunctional sensor offers significant potential for a variety of applications, including human motion detection, wearable technology, and robotics. Full article

The currently used electrical energy devices for portable applications are in limited life and need of frequent recharging, it is a big bottleneck for wireless and transportation systems. The scientific community is motivated to find innovative and efficient devices to convert environmental energy into useful forms. Nanogenerator can mitigate this issue by harvesting ambient energy of different forms into useful electrical energy. Particularly flexible nanogenerators can efficiently convert ambient mechanical energy into electrical energy which can be fruitfully used for self-powered sensors and electronic appliances. Zinc oxide is an interesting photosensitive and piezoelectric material that is expected to play a vital role in the synergetic harvesting of environmental thermal, sound, mechanical, and solar energies. As ZnO can be synthesized using easy methods and materials at low cost, the conversion efficiencies of solar and other energy forms can increase considerably. ZnO is a versatile material with interesting semiconducting, optical, and piezoelectric properties; it can be used advantageously to harvest more than one type of ambient energy. The coupled semiconducting and piezoelectric properties of ZnO are attractive for fabricating nanogenerators capable of harvesting both ambient optical and mechanical energies simultaneously. These nanolevel conversion devices are much required to power remote and implantable devices without the need for additional power sources. The present review briefly discusses the principles and mechanisms of different energy harvesting abilities of ZnO nanorods and their composites by consolidating available literature. In addition, the developments taking place in nanogenerators of different kinds—such as photovoltaic, piezoelectric, pyroelectric, and triboelectrics for self-powered technology—and their progress in hybrid energy harvesting application is reviewed. Full article

This study presents the development of a zinc oxide (ZnO) nanorod-based sensor for the detection and quantification of residual pesticides commonly found in tea plantations, with a focus on quinalphos and thiamethoxam. Exploiting the unique electrical characteristics of ZnO nanorods, the sensor exhibits high sensitivity and selectivity in monitoring trace levels of pesticide residues. The detection mechanism relies on measurable changes in electrical resistance when the ZnO nanorod-coated electrodes interact with varying concentrations of the target pesticides. A performance evaluation was carried out using water samples spiked with different pesticide concentrations. The sensor displayed distinct response profiles for each compound: a linear resistance–concentration relationship for quinalphos and a non-linear, saturating trend for thiamethoxam, reflecting their differential interactions with the ZnO surface. Statistical analysis confirmed the sensor’s reliability, reproducibility, and consistency across repeated measurements. The rapid response time and ease of fabrication underscore its potential for real-time, on-site pesticide monitoring. This method offers a promising alternative to traditional analytical techniques, enhancing food safety assurance and supporting sustainable agricultural practices through effective environmental surveillance. Full article

In this study, to enhance the output performance of a contact-separation mode triboelectric nanogenerator (TENG), a zinc oxide nanorod (ZnO NR) film with piezoelectric properties was integrated into a Polydimethylsiloxane (PDMS) film as the dielectric layer. The working mechanism of the PDMS-ZnO NR-based TENG was theoretically analyzed in two stages: charge transfer during contact electrification on the material surface and charge movement in the electrostatic induction process. The output characteristics of the PDMS-ZnO NR-based TENG were investigated and compared with those of a PDMS-based TENG. The experimental results demonstrate that the PDMS-ZnO NR-based TENG reached an open-circuit voltage of 39.34 V, representing an increase of 64.5% compared to the PDMS-based TENG. The maximum output power of a 4 cm × 4 cm PDMS-ZnO NR-based TENG reached 82.2 μW. Using a specially designed energy-harvesting circuit, the generated electrical energy was stored in a capacitor, which was charged to 1.47 V within 1 min and reached 3 V in just 2.78 min. This voltage was sufficient to power over 20 LEDs and small sensors. Additionally, the TENG was integrated into the sole of footwear, where the electrical signals generated by compression could be utilized for step counting and gait analysis. Full article

Flexible and wearable electronics often rely on piezoelectric materials, and Poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)) membranes are popular for this application. However, their electromechanical performance is limited due to a relatively low piezoelectric coefficient. To address this, this study investigates the incorporation of zinc oxide (ZnO) nanorods (NRs) into a P(VDF-TrFE) nanofiber membrane matrix. ZnO NRs were synthesized and doped into well-aligned P(VDF-TrFE) nanofibers using electrospinning with a high-speed rotating drum. The impact of ZnO NRs’ mass fraction on the piezoelectric properties of the membranes was evaluated. Results show that a maximum piezoelectric coefficient ($d_{33}$) of −62.4 pC/N, 9.5 times higher than neat P(VDF-TrFE), was achieved. These enhanced membranes demonstrated excellent performance in finger-tapping and bending detection, making them promising for large-scale flexible sensor applications in wearable electronics. This approach offers a simple and effective route to improve the performance of piezoelectric materials in flexible devices. Full article

The development of state-of-the-art gas sensors based on metal oxide semiconductors (MOS) to monitor hazardous and greenhouse gas (e.g., methane, CH₄, and carbon dioxide, CO₂) has been significantly advanced. Moreover, the morphological and topographical structures of MOSs have significantly influenced the gas sensors by means of surface catalytic activities. This work examines the impact of morphological and topological networked assembly of zinc oxide (ZnO) nanostructures, including microparticles and nanoparticles (0D), nanowires and nanorods (1D), nanodisks (2D), and hierarchical networks of tetrapods (3D). Gas sensors consisting of vertically aligned ZnO nanorods (ZnO–NR) and topologically interconnected tetrapods (T–ZnO) of varying diameter and arm thickness synthesized using aqueous phase deposition and flame transport method on interdigitated Pt electrodes are evaluated for methane detection. Smaller-diameter nanorods and tetrapod arms (nanowire-like), having higher surface-to-volume ratios with reasonable porosity, exhibit improved sensing behavior. Interestingly, when the nanorods’ diameter and interconnected tetrapod arm thickness were comparable to the width of the depletion layer, a significant increase in sensitivity (from 2 to 30) and reduction in response/recovery time (from 58 s to 5.9 s) resulted, ascribed to rapid desorption of analyte species. Additionally, nanoparticles surface-catalyzed with Pd (~50 nm) accelerated gas sensing and lowered operating temperature (from 200 °C to 50 °C) when combined with UV photoactivation. We modeled the experimental findings using a modified general formula for ZnO methane sensors derived from the catalytic chemical reaction between methane molecules and oxygen ions and considered the structural surface-to-volume ratios (S/V) and electronic depletion region width (L_d) applicable to other gas sensors (e.g., SnO₂, TiO₂, MoO₃, and WO₃). Finally, the effects of UV light excitation reducing detection temperature help to break through the bottleneck of ZnO-based materials as energy-saving chemiresistors and promote applications relevant to environmental and industrial harmful gas detection. Full article

The burgeoning field of biosensors has seen significant advancements with the induction of zinc oxide (ZnO) nanostructures, because of their unique structural, electrical, and optical properties. ZnO nanostructures provide numerous benefits for biosensor applications. Their superior electron mobility enables effective electron transfer between the bioreceptor and transducer, enhancing sensitivity and reducing detection limits. Furthermore, ZnO’s biocompatibility and non-toxicity make it ideal for in vivo applications, reducing the chances of adverse biological responses. This review paper explores the prospects of ZnO nanostructures in the development of biosensors, focusing on their morphological and structural characteristics. Various synthesis techniques, that include sol-gel, sputtering, and chemical vapor deposition, were successfully employed to prepare different ZnO nanostructures, like nanorods, nanotubes, and nanowires. The various findings in this field underscore the efficacy of ZnO nanostructures in enhancing the specificity and sensitivity of biosensors, presenting a promising avenue for the advancement of point-of-care diagnostic devices. Full article

Zinc oxide nanoparticles (ZnO NPs) were synthesized using a simple and eco-friendly precipitation method, employing a capping agent derived from chia seeds (Salvia hispanica). X-ray diffraction (XRD) analysis confirmed the formation of ZnO with a hexagonal crystal structure and an average crystallite size of less than 30 nm. Scanning electron microscopy (SEM) revealed distinct quasi-spherical and nanorod-like morphologies, while energy-dispersive X-ray spectroscopy (EDX) verified the presence of zinc and oxygen. Diffuse reflectance spectroscopy (DRS) indicated significant activity in the UV region, with the nanoparticles exhibiting a band gap of 3.25 eV. The photocatalytic efficiency of the synthesized ZnO NPs was evaluated through their ability to degrade diclofenac sodium (DCF) and para-nitrophenol (4-nitrophenol, PNP) under UV-LED irradiation, achieving pollutant removal rates exceeding 98%. The degradation mechanism is clarified by a detailed characterization of the reaction intermediates. These findings highlight the potential of ZnO NPs synthesized from chia seed extract for effective environmental remediation of pharmaceutical and organic pollutants. Full article