Search Results (13)

The papermaking and recycling industries face increasing demands to improve efficiency, product quality, and environmental performance under conditions of water closure and high furnish variability. This study presents a comprehensive assessment of process control and management strategies for optimizing fines behavior, retention and fixation efficiency, de-inking performance, and ash balance in modern papermaking systems. The surface chemistry of fines was found to play a pivotal role in regulating charge distribution, additive demand, and drainage behavior, acting both as carriers and sinks for dissolved and colloidal substances. Results show that light, targeted refining enhances external fibrillation and produces beneficial fines that strengthen fiber bonding, while excessive refining generates detrimental fines and impairs drainage. Sequential retention programs involving polyamines, polyaluminum compounds, and microparticle systems significantly improve fines capture and drainage stability when operated under controlled pH and ionic strength. In recycling operations, optimized flotation conditions coupled with detackifiers and mineral additives such as talc effectively reduce micro-stickies formation and deposition risks. Ash management strategies based on partial purge and coordinated filler make-up maintain bonding, optical properties, and energy efficiency. Overall, the findings emphasize the need for an integrated wet-end management framework combining chemical, mechanical, and operational controls. Perspectives for future development include the application of biodegradable additives, nanocellulose-based reinforcements, and data-driven optimization tools to achieve sustainable, high-performance paper manufacturing. Full article

This work is devoted to the changes in polysaccharides in thermally treated wood after its accelerated aging with the aim of its optimal utilization after its original use has ended. Spruce wood samples were treated by the Thermowood process at temperatures of 160 °C, 180 °C, and 210 °C and subjected to accelerated aging in wet mode. The influence of treatment temperature and accelerated aging was monitored by wet chemistry, high-performance liquid chromatography (HPLC), X-ray diffraction (XRD), size exclusion chromatography (SEC), and Fourier-transform infrared spectroscopy (FTIR). During thermal treatment, hemicelluloses are mainly degraded. At the temperature of 210 °C, aromatic compounds formed as degradation products of lignin and hemicelluloses bind to cellulose fibers and increase cellulose yield. Preferential decomposition of the amorphous portion of cellulose leads to an increase in its crystallinity, while higher temperatures cause degradation of the crystal lattice. The degree of polymerization in both cellulose and hemicelluloses decreases due to the cleavage of glycosidic bonds. Accelerated aging does not significantly affect the changes in polysaccharides. The results obtained can be used in the processing of cellulose and hemicelluloses from thermally modified wood at the end of its life cycle in various industrial fields. Full article

The marketability of fresh granadilla (Passiflora edulis) fruit is significantly reduced by oxidation reactions occurring in its exocarp, which is not directly linked to the organoleptic quality of its arils. However, organic means of mitigating this are not topical in research. This study investigated the potency of moringa (Moringa oleifera)-based coating to preserve antioxidant compounds in granadilla. Physiologically mature fruit of equal size were assigned to a completely randomized design experiment at the North-West University Farm Laboratory. The fruit samples were coated with 2% xanthan gum (commercial coating), 2% moringa, or 2% rosemary coating and kept at shelf-life conditions (25 ± 2 °C; 40 ± 5%RH) for 5 weeks while sampling at weekly intervals. Correlations between the measured parameters were confirmed prior to regression analysis. Significant (p < 0.05) differences were observed in weekly changes in the exocarp pH, total antioxidant compounds (TAO), tartaric acid (TA), malic acid (MA), and citric acid (CA). At the end of storage, the moringa- and xanthan-coated fruit had the highest exocarp pH (7.8) and TAO (0.87 mg/g). Moringa-coated fruit had higher TA and MA (6.0 and 5.36 µg/g, respectively) as well as a significantly higher CA (0.51 µg/g) preserved than the other coatings. Strong correlations between MA and TAO (r > 0.82), as well as TA and TAO (r > 0.86), indicated the potency of developing TAO estimation models using multivariate data from the organic acids. Pre-processed data regression models were developed but were limited by the amount of data collected. Models developed similarly can be used for sustainable TAO assessment as a latent variable to minimize toxic waste that results from wet chemistry analyses. Full article

Thermal modification improves the properties of wood, especially its stability and durability. We thermally treated spruce wood with the Thermowood process at three temperatures (160 °C, 180 °C, and 210 °C) and subjected it to accelerated aging in wet mode. We evaluated the chemical composition (wet chemistry, infrared spectroscopy), color, surface morphology, and wetting of the wood surface with water. Thermal treatment caused a significant decrease in hemicelluloses (up to 72.39% at a temperature of 210 °C), which initiated an increase in the content of more resistant wood components—cellulose and lignin. With accelerated aging, the hemicellulose content decreased by another 5%. The most significant differences between the infrared spectra of thermally modified wood before and after exposure to accelerated aging were in the absorption bands of lignin (1509 and 1596 cm⁻¹) and in the region of carbonyl groups between 1800 and 1630 cm⁻¹. Thermal treatment also caused a change in the color of the wood to dark brown; the overall color difference ΔE increased several times. The thermal-induced shortening of polysaccharide fibers and reduction in their width were even more manifested during accelerated aging. This work contains new knowledge about the properties critical for the reuse of thermally modified wood after accelerated aging, simulating the end of its life cycle. Full article

Thermal modification is an environmentally friendly process that does not utilize chemical agents to enhance the stability and durability of wood. The use of thermally modified wood results in a significantly extended lifespan compared with untreated wood, with minimal maintenance requirements, thereby reducing the carbon footprint. This study examines the impact of varying modification temperatures (160, 180, and 210 °C) on the lignin of spruce wood using the ThermoWood process and following the accelerated aging of thermally modified wood. Wet chemistry methods, including nitrobenzene oxidation (NBO), size exclusion chromatography (SEC), thermogravimetry (TG), differential thermogravimetry (DTG), and Fourier transform infrared spectroscopy (FTIR), were employed to investigate the alterations in lignin. At lower modification temperatures, the predominant reaction is the degradation of lignin, which results in a reduction in the molecular weight and an enhanced yield of NBO (vanillin and vanillic acid) products. At elevated temperatures, condensation and repolymerization reactions become the dominant processes, increasing these traits. The lignin content of aged wood is higher than that of thermally modified wood, which has a lower molecular weight and a lower decomposition temperature. The results demonstrate that lignin isolated from thermally modified wood at the end of its life cycle is a promising feedstock for carbon-based materials and the production of a variety of aromatic monomers, including phenols, aromatic aldehydes and acids, and benzene derivatives. Full article

Nanopatterning methods utilizing block copolymer (BCP) self-assembly are attractive for semiconductor fabrication due to their molecular precision and high resolution. Grafted polymer brushes play a crucial role in providing a neutral surface conducive for the orientational control of BCPs. These brushes create a non-preferential substrate, allowing wetting of the distinct chemistries from each block of the BCP. This vertically aligns the BCP self-assembled lattice to create patterns that are useful for semiconductor nanofabrication. In this review, we aim to explore various methods used to tune the substrate and BCP interface toward a neutral template. This review takes a historical perspective on the polymer brush methods developed to achieve substrate neutrality. We divide the approaches into copolymer and blended homopolymer methods. Early attempts to obtain neutral substrates utilized end-grafted random copolymers that consisted of monomers from each block. This evolved into side-group-grafted chains, cross-linked mats, and block cooligomer brushes. Amidst the augmentation of the chain architecture, homopolymer blends were developed as a facile method where polymer chains with each chemistry were mixed and grafted onto the substrate. This was largely believed to be challenging due to the macrophase separation of the chemically incompatible chains. However, innovative methods such as sequential grafting and BCP compatibilizers were utilized to circumvent this problem. The advantages and challenges of each method are discussed in the context of neutrality and feasibility. Full article

Forests are critical water supply regions that are increasingly threatened by natural and anthropogenic disturbance. Evaluation of runoff-generating processes within harvested and undisturbed headwater catchments provides insight into disturbance impacts on water quality and drinking water treatability. In this study, an extensive hydrologic dataset collected at the experimental Turkey Lakes Watershed (TLW) located on the Canadian Shield was used to quantify sources of stormflow in legacy clear-cut (24-years post harvesting) and forested (control) headwater catchments using an end member mixing analysis (EMMA) model. Stream water, groundwater, soil water, and throughfall water quality were evaluated during spring snowmelt, stormflow, and fall wet-up. Groundwater chemistry was similar to stream water chemistry in both catchments, suggesting that groundwater is a major contributor to stream flow. The water chemistry in small wetlands within the study catchments was comparable to stream water chemistry, suggesting that wetlands are also important contributors to stream flow. Differences in wetland position between the legacy clear-cut and control catchments appeared to have a greater influence on source contributions than legacy harvesting. Results from this study provide insight into runoff-generation processes that reflect event/seasonal flow dynamics and the impacts on water quality. Full article

Here, a brief history of the development of the ballpoint/rollerball pen and the fountain pen is presented. Their principle of operation is analogous that of multipart microfluidics-type devices, where capillarity–gravity drives the ink, a complex fluid, to flow in the confinement of a micrometer-sized canal or to lubricate a ball rotating in a socket. The differences in the operational writing principles of the fountain pen versus the ballpoint/rollerball pen are discussed. The ballpoint/rollerball pen’s manner of writing was monitored using lens end fiber optics and was digitally recorded. The ball rotation rate per unit length was monitored using a piezoelectric disk oscilloscope technique. The role of ink (a complex fluid) chemistry in the wetting phenomenon is elucidated. We also discuss methods for studying and evaluating ink–film–ball–paper surface wetting. The goal of the proposed research is to optimize and improve the writing performance of the ballpoint/rollerball pen. Full article

Extruded spaghetti-type pasta systems were obtained separately either from native or oxidized starch prepared via wet chemistry with the aim of evaluating the effect of oxidation modification of starch. In addition to this, the butyrylation reaction (butyrate (Bu) esterification—short-chain fatty acid) using native or oxidized starch was analyzed under reactive extrusion (REx) conditions with and without the addition of a green food-grade organocatalyst (l(+)-tartaric acid) with the purpose of developing potentially health-promoting spaghetti-type pasta systems in terms of increasing its resistant starch (RS) values. These would be due to obtaining organocatalytic butyrylated starch or not, or the manufacture of a doubly modified starch (oxidized-butyrylated—starch oxidation followed by organocatalytic butyrylation) or not. To this end, six pasta systems were developed and characterized by solid-state ¹³C cross-polarization magic angle spinning nuclear magnetic resonance (CP MAS NMR) spectroscopy, degree of substitution (DS), attenuated total reflectance Fourier transform infrared (ATR/FTIR) spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA), pancreatic digestion, free Bu content analysis and in vitro starch digestibility. The results obtained here suggest that starch oxidation hydrolytically degrades starch chains, making them more susceptible to enzymatic degradation by α-amylase. However, the oxidized starch-based pasta systems, once esterified by Bu mainly on the amylose molecules (doubly modified pasta systems) increased their RS values, and this was more pronounced with the addition of the organocatalyst (maximum RS value = ~8%). Interestingly, despite the checked chemical changes that took place on the molecular structure of starch upon butyrylation or oxidation reactions in corn starch-based spaghetti-type pasta systems, and their incidence on starch digestibility, the orthorhombic crystalline structure (A-type starch) of starch remained unchanged. Full article

Biochar applications to soils may enhance soil quality, hydrological properties, and agronomic productivity. Modification of biochar by activation via introduction of heteroatoms at different pyrolysis conditions can alter physical and chemical characteristics, which may enhance soil properties, although the extent of this is unknown. The objective of this study was to investigate the impacts of pyrolysis temperature (400, 500, 600, and 700 °C) on activated (activated with methanesulfonic acid) and unactivated biochar produced from poultry litter to identify optimum production conditions for end use as a soil amendment. Physical, chemical, and surface properties of biochars were determined using wet chemistry and spectroscopic analyses. Results showed that activation with methanesulfonic acid increased biochars’ oxygen content, while decreasing its point of zero charge and electrical conductivity. Conversion of raw poultry litter to activated and unactivated biochar increased concentration of P (3-fold), K (1.8-fold), Ca (3-fold), Mg (2.3-fold), and S (4.8-fold), with concentrations increasing with increasing temperatures (p < 0.05) except for C and N. Activated biochar had lower recovery of C and N, but greater water-holding capacity than unactivated biochar. Concentrations of NH₄-N, NO₃-N, and water-soluble P were greater in unactivated biochar (p < 0.05). Among all biochars, activated biochar produced at 400 °C had the lowest bulk density, total P, K, Ca, and Mg, and greatest water-holding capacity, water-soluble P, Ca, and Mg concentrations, thereby suggesting improved soil amendment characteristics and subsequent soil health under poultry litter biochars produced under these conditions. Full article

Pr³⁺-doped Y₂O₃ nanocrystals (NCs) have been obtained via five wet-chemistry synthesis methods which were optimized in order to achieve superior optical properties. To this end, a systematic study on the influence of different reaction parameters was performed for each procedure. Specifically, precursor concentration, reaction temperature, calcination temperature, and time, among others, were analyzed. The synthesized Y₂O₃: Pr³⁺ NCs were characterized by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), powder X-ray diffraction (PXRD), transmission electron microscopy (TEM), and reflectance and Raman spectroscopy. In addition, the optical properties of such NCs were investigated by excitation, emission, and luminescence decay measurements. Concretely, emission from the ¹D₂ level was detected in all samples, while emission from ³P_J was absent. Finally, the effect of the synthesis methods and the reaction conditions on the luminescence decay has been discussed, and a comparative study of the different methods using the fluorescence lifetime of so-obtained Y₂O₃: Pr³⁺ NCs as a figure of merit has been carried out. Full article

Wetting agents are the primary tool used to control soil water repellency (SWR) and localized dry spot (LDS), especially on sand-based soils. However, the effect of repeated applications of wetting agents on soil microbial populations is unknown. This two-year field experiment investigated six wetting agents representing different chemistry effects on a creeping bentgrass (Agrostis stolonifera L.) putting green with existing SWR. Four out of the six wetting agents improved soil volumetric water content in the second growing season, while others showed no effect. This result was negatively correlated to the development of LDS, and positively correlated to occurrence of an air-borne turf disease. Soil microbial populations, determined by soil phospholipid fatty acid (PLFA) analysis, found that none of the treatments applied caused a shift in microbial populations between fungi and bacteria, or gram-positive and gram-negative bacteria. The stress indicators such as saturated to mono-unsaturated fatty acids were not affected by the wetting agents applied as well. However, the wetting agent that contains alkyl block polymers (ABP; Matador) with proven capability for removal of soil organic coatings showed inhibition of microbial populations at one evaluation timing. This result suggested a temporary restriction in soil carbon availability for soil microorganisms following repeated ABP application, which likely contributed to the elevated LDS development observed. Another wetting agent, a combined product of a nonionic surfactant plus acidifiers (NIS; pHAcid), which is designed to reduce inorganic carbonates while enhancing wetting, elevated all soil microbial populations tested at the end of the experiment, indicating a desirable improvement in soil health. However, repeated application of NIS did not reduce SWR at the conclusion of this experiment, which, in combination with a previous report, suggested a minimal disturbance of soil organic coatings of the hydrophobic sand. Overall, this experiment suggested that soil microbial populations can be affected by wetting agents which may further influence SWR, yet the actual effect on soil microorganisms varies depending on the chemistry of the wetting agents. Full article

To investigate the potential for the utilization of cotton stalk, ammonia hydrothermal treatment was applied to fractionate the samples into aqueous ammonia-soluble and ammonia-insoluble portions. The ammonia-soluble portion was purified to yield lignin fractions. The lignin fractions obtained were characterized by wet chemistry (carbohydrate analysis) and spectroscopy methods (FT-IR, ¹³C and ¹H-¹³C HSQC NMR spectroscopy) as well as gel permeation chromatography (GPC). The results showed that the cotton stalk lignin fractions were almost absent of neutral sugars (0.43%–1.29%) and had relatively low average molecular weights (1255–1746 g/mol). The lignin fractions belonged to typical G-S lignin, which was composed predominately of G-type units (59%) and noticeable amounts of S-type units (40%) together with a small amount of H-type units (~1%). Furthermore, the ammonia-extractable lignin fractions were mainly composed of β-O-4' inter-unit linkages (75.6%), and small quantities of β-β' (12.2%), together with lower amounts of β-5' carbon-carbon linkages (7.4%) and p-hydroxycinnamyl alcohol end groups. Full article