Search Results (322)

The global transition towards sustainable energy has accelerated the development and deployment of offshore wind turbines. Jacket foundations, commonly installed in intermediate to deep water depths to access available space and higher load capacities, are built to withstand intensified hydrodynamic loads. Due to their structural complexity near the seabed, however, they are prone to local and global scour, which can compromise stability and increase maintenance costs. While extensive research has addressed scour protections around monopiles, limited attention has been given to complex foundation geometries or even hybrid configurations that combine energy-harvesting devices with structural support. These hybrid systems introduce highly unsteady flow fields and amplified turbulence effects that current design frameworks appear to be unable to capture. This study provides an experimental characterisation of scour damage in riprap-protected jackets as well as additional tests for a hybrid jacket foundation. A novel adaptation of a high-resolution overlapping sub-area methodology was employed. For the first time, it was successfully applied to quantify the damage to riprap protections for a complex offshore foundation. Results revealed that, although hybrid jackets showed the capacity to attenuate incident waves, the scour protection experienced damage numbers (S_3D) two to six times higher than conventional jackets due to flow amplifications. The findings highlight the need for revised design guidelines that can account for the complex hydrodynamic-structural interactions of next-generation marine harvesting technologies integrated into complex foundations. Full article

Battery-Free Sensor Nodes (BFSNs) used in Simultaneous Wireless Information and Power Transfer (SWIPT) systems often rely on lightweight communication protocols with minimal security overhead due to strict energy constraints. As a result, conventional protocol-dependent security mechanisms cannot be employed, leaving BFSNs vulnerable to replay, spoofing, and other security threats. This paper explores a protocol-independent security mechanism that enhances BFSN security by exploiting the power wave for controlled backscattering. The method introduces a Manchester-encoded digital private key generated by the BFSN’s low-power microcontroller and backscattered through a polarization-shifting module enabled by a fail-safe RF switch, thereby avoiding the need for a dedicated backscattering rectifier. A LoRaWAN-based BFSN integrating this add-on module was implemented to experimentally validate the approach. Results show successful extraction of the backscattered key with minimal energy overhead (approximately 95 µJ for a 3 ms identification sequence), while the original high-efficiency RF rectifier used for harvesting remains unmodified. The orthogonal polarization between the incoming and backscattered waves additionally reduces clutter and cross-jamming effects. These findings demonstrate that secure identification can be seamlessly incorporated into existing BFSNs without altering their core architecture, offering an easy-to-integrate and energy-efficient solution for improving security in SWIPT-based sensing systems. Full article

Seismic metamaterial-inspired periodic foundations have emerged as promising vibration-mitigation concepts capable of attenuating seismic wave propagation within specific frequency bands. This study presents an experimental investigation on the dynamic response of periodic foundation configurations, with and without embedded piezoelectric layers, to evaluate their vibration-attenuation characteristics. The experimental program employed a shake table driven by a 0.75 kW servo motor and included excitation step counts of 3000, 4000, and 5000. Accelerometers mounted on the specimen surfaces recorded vibration data at 80 ms intervals. Three foundation configurations were tested: (i) a conventional reinforced concrete block, (ii) a one-dimensional periodic foundation composed of alternating concrete and rubber layers, and (iii) a periodic foundation incorporating piezoelectric modules. Time-domain and frequency-domain analyses showed that the periodic foundations achieved notable reductions in both peak and RMS accelerations, especially near resonance frequencies. The configuration, including piezoelectric layers, exhibited similar attenuation performance while also generating measurable instantaneous voltage outputs under vibration. However, these voltage peaks—reaching a maximum of 1.64 V—represent only a laboratory-scale, proof-of-concept demonstration of electromechanical coupling rather than a practical or continuous form of energy harvesting, given the inherently sporadic nature of seismic excitation. Overall, the results confirm that the tested system is not a full metamaterial in the classical sense but rather a metamaterial-inspired periodic arrangement capable of inducing band-gap-based vibration attenuation. The inclusion of piezoelectric elements provides auxiliary sensing and micro-energy-generation capabilities, offering a preliminary foundation for future multifunctional seismic-protection concepts. Full article

Ocean waves constitute a vast renewable resource, yet most linear generator-based wave energy converters (WECs) rely on single-degree-of-freedom (SDOF) linear oscillators that exhibit narrow resonance bandwidths and utilise sliding components prone to wear. To address these limitations, this paper presents a nonlinear three-degree-of-freedom (3DOF) magnetic spring power-take-off (PTO) system for broadband wave energy harvesting. The device comprises three axially levitated NdFeB permanent magnets, each coupled to an independent copper coil, forming a compact, friction-free generator column. A coupled electromechanical state-space model was developed and experimentally validated on a laboratory-scale test rig. The 3DOF PTO exhibited three distinct resonance modes at approximately 35, 48, and 69 rad s⁻¹, enabling multi-mode energy capture across a broad frequency range. Under identical excitation (6.5 N amplitude and 3.13 Hz excitation force), the 3DOF configuration achieved a 114.5% increase in RMS voltage compared with the SDOF design and a 44.10% improvement over the 2DOF benchmark, confirming the effectiveness of the coupled resonance mechanism. The levitated magnetic architecture eliminates mechanical contact and lubrication, reducing wear and maintenance while improving long-term reliability in marine environments. A preliminary life-cycle assessment estimated a cradle-to-gate carbon intensity of 40–80 g CO₂-eq kWh⁻¹, significantly lower than that of conventional hydraulic PTOs, owing to reduced steel use and recyclable magnet assemblies. The proposed 3DOF magnetic spring PTO thus offers a sustainable, low-maintenance, and high-efficiency solution for next-generation ocean-energy converters. Full article

BU–MIT whistler wave injection experiments, which were conducted at Arecibo Observatory, started with the joint US–USSR Active Space Plasma Program Experiment on 24 December 1989. In this experiment, a satellite-borne VLF transmitter injected radio waves at the frequency and power of 10 kHz and 10 kW. A series of controlled whistler wave experiments with the Arecibo HF heater were subsequently carried out during 1990–1998 until the HF heater was damaged by Hurricane Georges in 1998. In these ionospheric HF heating experiments, 28.5 kHz whistler waves were launched from the nearby naval transmitter (code-named NAU) located at Aguadilla, Puerto Rico. HF heater waves were used to create ionospheric ducts (in the form of parallel-plate waveguides) to facilitate the entry of NAU whistler waves from the neutral atmosphere into the ionosphere. Conjugate whistler wave propagation experiments were conducted between Arecibo, Puerto Rico and Trelew, Argentina in 1997. After 1999, whistler wave experiments in the absence of an HF heater had been conducted. Naturally-occurring large-scale ionospheric irregularities due to spread F or Traveling Ionospheric Disturbances (TIDs) were relied on to guide NAU launched 40.75 kHz whistler waves to propagate from the ionosphere further into the radiation belts, to cause 390 keV charged-particle precipitation. A train of TIDs, resulting from the 9.2 Mw earthquake off the west coast of Sumatra, Indonesia, was observed in our 26 December 2004 Arecibo experiments, about a day after the earthquake-launched tsunami waves traveled across the Indian Ocean, then into remote parts of the Atlantic Ocean. The author’s recent research efforts, motivated by Arecibo experiments, focus on Solar Powered Microwave Transmitting Systems, to simulate Solar Energy Harvesting via Solar Power Satellite (SPS) (also known as Space Based Solar Power (SBSP)) These experiments involved a large number of the author’s BU and MIT students working on theses and participating in the Undergraduate Research Opportunities Program (UROP), in collaboration with other colleagues at several universities and national laboratories. Full article

Wireless sensors are vital for real-time condition monitoring of rotating machinery. Traditionally, these sensors depend on batteries, a solution that is neither eco-friendly nor cost-effective due to high maintenance. Vibration energy harvesting has emerged as a promising alternative for powering these sensors. Nevertheless, current energy harvesters commonly disregard high-frequency energy, which is weak but contains abundant condition-monitoring information. Moreover, the destructive interference between multiple vibration sources further attenuates the high-frequency energy. To address these limitations, this paper proposed a novel energy harvesting method based on a symmetrical gradient metamaterial beam (SGMB). The SGMB structure is designed to have multiple bands to enhance the high-frequency energy and diminish the destructive interference of flexural waves from two vibration sources. Multiple piezoelectric patches are integrated into SGMB to convert the dynamic stress into harvestable electrical power, enabling multi-band dual-source energy harvesting. Based on the rainbow trapping mechanism, the SGMB was first designed and optimized for desired frequency bands. Subsequently, the band characteristics and piezoelectric output performance were adjusted and validated through finite element simulation. Finally, experimental evaluations were conducted to validate the performance of the designed metamaterial. The results demonstrate that the SGMB provides multiple enhanced bands within the range from 1000 Hz to 3500 Hz and improves the energy harvesting efficiency by a factor over 100, which represents a breakthrough in developing self-powered and self-sensing wireless sensors. Full article

This paper examines the nonlinear behavior of the generalized stochastic intermediate dispersive velocity (SIdV) equation, which has been widely analyzed in a non-noise deterministic framework but has yet to be studied in any depth in the presence of varying forcing strength and noise types, in particular how it switches between periodic, quasi-periodic, and chaotic regimes. A stochastic wave transformation reduces the equation to simpler ordinary differential equations to make soliton overlap analysis feasible to analyze soliton robustness under deterministic and stochastic conditions. Lyapunov exponents, power spectra, recurrence quantification, correlation dimension, entropy measures, return maps, and basin stability are then used to measure the effect of white, Brownian, and colored noise on attractor formation, system stability, and spectral correlations. Order–chaos transitions as well as noise-induced complexity are more effectively described by bifurcation diagrams and by Lyapunov spectra. The results of this experiment improve the theoretical knowledge of stochastic nonlinear waves and offer information that will be useful in the fields of control engineering, energy harvesting, optical communications, and signal processing applications. Full article

This paper investigates the dual-functional broadband properties of an asymmetric piezoelectric metamaterial beam for simultaneous vibration reduction and energy harvesting. Firstly, a grading method is proposed, and an asymmetric piezoelectric metamaterial beam structure model with the gradient mode is established. The effects of various gradient modes on the grading parameters of each segment are examined. Subsequently, the band structure and group velocity of each segment are examined to elucidate the propagation and energy harvesting mechanisms for the bending-dominated wave. Furthermore, the evaluation criteria for dual-functional properties in the gradient mode are introduced, revealing the broadening law of the dual-functional band under various gradient modes. Finally, the theoretical results are analyzed and compared with the finite element method (FEM). The results show that in gradient mode, the bending-dominated wave in the asymmetric piezoelectric metamaterial beam generates the spatial frequency division and enhances wave field energy. Compared with the uniform mode, the gradient modes can simultaneously achieve dual-functional effects in both the low-frequency and broadband ranges, significantly improving performance. Parameters such as gradient modes and grading variation ranges significantly impact the dual-functional performance. By reasonably selecting the grading parameters, enhanced dual-functional performance can be achieved. Full article

One-dimensional (1D) nanowires represent a critical class of nanomaterials with extensive applications in biosensing, biomedicine, bioelectronics, and energy harvesting. In materials science, accurately extracting their morphological and structural features is essential for effective image segmentation. However, 1D nanowires frequently appear in dispersed or entangled configurations, often with blurred backgrounds and indistinct boundaries, which significantly complicates the segmentation process. Traditional threshold-based methods struggle to segment these structurally complex nanowires with high precision. To address this challenge, we propose a wavelet-based Bilateral Segmentation Network named WaveBiSeNet, to which a Dual Wavelet Convolution Module (DWCM) and a Flexible Upsampling Module (FUM) are introduced to enhance feature representation and improve segmentation accuracy. In this study, we benchmarked WaveBiSeNet against ten segmentation models on a peptide nanowire image dataset. Experimental results demonstrate that WaveBiSeNet achieves, mIoU of 77.59%, an accuracy of 89.95%, an F1 score of 87.22%, and a Kappa coefficient of 74.13%, respectively. Compared to other advanced models, our proposed model achieves better segmentation performance. These findings demonstrate that WaveBiSeNet is an end-to-end deep segmentation network capable of accurately analyzing complex 1D nanowire structures. Full article

This paper presents an innovative approach to efficiently harvesting energy from ocean waves through a buoy-type Wave Energy Converter (WEC). The proposed methodology integrates a buoy, a Mechanical Motion Rectifier (MMR), a Motion Rectifier (MR), an Energy Storage Element (ESE), and an electric generator. A MATLAB-2023 model has been employed to assess the electrical power generated under varying wave heights and frequencies. Experimental data and numerical simulations reveal that the prototype Wave Energy Harvester (WEH) achieved a peak voltage of 6.7 V, peak power of 3.6 W, and an average power output of 8.5 mW, with an overall efficiency of 47.2% for the device’s actual size. Additionally, a theoretical analysis has been conducted to investigate the impact of incorporating additional buoys on the electrical power output. Full article

Practical applications of piezoelectric vibration energy harvesting systems are required to produce a stable DC output through the nonlinear process of AC-DC rectification. In most simulation studies of such systems, the diodes have been idealised as switches, an assumption that is valid only if the vibration-induced voltage is high enough, which is frequently not the case in practice. This paper presents an experimentally validated simulation of a base excited vibration energy harvester connected to a full wave rectified load, combining the analytical modal transformation of the Euler–Bernoulli model of a piezoelectric beam with the nonlinear current-voltage characteristic of a real (non-ideal) diode. Three types of diodes with significantly different model parameters sourced from industry-standard datasets are considered. Discrepancies between simulated and measured resonant voltage levels are found to be less than 10% on average, and the discrepancy in resonant frequency is less than 1%, demonstrating the reliability of the Shockley diode model despite its omission of the dynamic behaviour of the diode. Full article

This study introduces a novel adaptive Mechanical Wave Energy Converter (MWEC) designed to efficiently capture nearshore wave energy for sustainable electricity generation along the southeast surf coast of NEOM (135° longitude). The MWEC system features a polyvinyl chloride (PVC) cubic buoy integrated with a mechanical power take-off (PTO) mechanism, optimized for deployment in shallow waters for a depth of around 1 m. Three buoy volumes, V1: 6000 cm³, V2: 30,000 cm³, and V3: 72,000 cm³, were experimentally evaluated under consistent PTO and spring tension configurations. The findings reveal a direct relationship between buoy volume and force output, with larger buoys exhibiting greater energy capture potential, while smaller buoys provided faster and more stable response dynamics. The energy retention efficiency of the buoy–PTO system was measured at 20% for V1, 14% for V2, and 10% for V3, indicating a trade-off between responsiveness and total energy capture. Notably, the largest buoy (V3) generated a peak power output of 213 W at an average wave amplitude of 65 cm, confirming its suitability for high-energy conditions along NEOM’s surf coast. In contrast, the smaller buoy (V1) performed more effectively during periods of reduced wave activity. Wave climate data collected during November and December 2024 support a hybrid deployment strategy, utilizing different buoy sizes to adapt to seasonal wave variability. These results highlight the potential of modular, wave-adaptive mechanical systems for scalable, site-specific renewable energy solutions in coastal environments like NEOM. The proposed MWEC offers a promising path toward low-cost, low-maintenance wave energy harvesting in shallow waters, contributing to Saudi Arabia’s sustainable energy goals. Full article

A new energy storage unit, which is fed by a piezoelectric wind energy harvester, is explored. The outputs of a three-phase piezoelectric wind energy device have been initially recorded from the laboratory experiments. Following the records of voltage outputs, the power ranges of the device were measured at several hundred microwatts. The main issue of piezoelectric voltage generation is that voltage waveforms of piezoelectric materials have high total harmonic distortion (THD) with incredibly high subharmonics and superharmonics. Therefore, such a material reply causes a certain power loss at the output of the wind energy generator. In order to fix this problem, we propose a combination of a rectifier and a storage system, where they can operate compatibly under high THD rates (i.e., 125%). Due to high THD values, current–voltage characteristics are not linear-dependent; indeed, because of capacitive effect of the piezoelectric (i.e., lead zirconium titanite) material, harvested power from the material is reduced by nearly a factor of 20% in the output. That also negatively affects the storage on the Li-based battery. In order to compensate, the output waveform of the device, the waveforms, which are received from the energy-harvester device, are first rectified by a full-wave rectifier that has a maximum power point tracking (MPPT) unit. The SOC values prove that almost 40% of the charge is stored in 1.2 s under moderate wind speeds, such as 6.1 m/s. To conclude, a better harvesting performance has been obtained by storing the energy into the Li-ion battery under a current–voltage-controlled boost converter technique. Full article

Non-perturbative approaches to linear and nonlinear responses (NLR) of atoms, molecules, and molecular aggregates are reviewed in relation to low and high harmonic generations (HG) by laser fields. These response properties are effective for the generation of entangled light pairs for quantum information processing by spontaneous parametric downconversion (SPDC) and stimulated four-wave mixing (SFWM). Quasi-energy derivative (QED) methods, such as QED Møller–Plesset (MP) perturbation, are reviewed as time-dependent variational methods (TDVP), providing analytical expressions of time-dependent linear and nonlinear responses of open-shell atoms, molecules, and molecular aggregates. Numerical Liouville methods for the low HG (LHG) and high HG (HHG) regimes are reviewed to elucidate the NLR of molecules in both LHG and HHG regimes. Three-step models for the generation of HHG in the latter regime are reviewed in relation to developments of attosecond science and spectroscopy. Orbital tomography is also reviewed in relation to the theoretical and experimental studies of the amplitudes and phases of wave functions of open-shell atoms and molecules, such as molecular oxygen, providing the Dyson orbital explanation. Interactions between quantum lights and molecules are theoretically examined in relation to derivations of several distribution functions for quantum information processing, quantum dynamics of molecular aggregates, and future developments of quantum molecular devices such as measurement-based quantum computation (MBQC). Quantum dynamics for energy transfer in dendrimer and related light-harvesting antenna systems are reviewed to examine the classical and quantum dynamics behaviors of photosynthesis. It is shown that quantum coherence plays an important role in the well-organized arrays of chromophores. Finally, applications of quantum optics to molecular quantum information and quantum biology are examined in relation to emerging interdisciplinary frontiers. Full article

We design a one-dimensional magnetoelastic phononic crystal slab composed of the smart magnetostrictive material Terfenol-D and pure tungsten. Band inversion and topological phase transitions are achieved by modifying the geometric parameters of the non-magnetic medium within the unit cell. The emergence of topological interface states within overlapping bandgaps, exhibiting distinct topological properties, along with their robustness against interfacial structural defects, is confirmed. The coupling effects between adjacent topological interface states in a sandwich-like supercell configuration are investigated, and their tunability under external magnetic fields is demonstrated. A Su-Schrieffer-Heeger (SSH) phononic crystal slab system under gradient magnetic fields is proposed. Critically, and in stark contrast to previous static or structurally graded designs, we achieve reconfigurable rainbow trapping of topological interface states solely by reprogramming the gradient magnetic field, leaving the physical structure entirely unchanged. This highly localized, compact, and broadband-tunable topological rainbow trapping system design holds significant promise for applications in elastic energy harvesting, wave filtering, and multi-frequency signal processing. Full article