Search Results (21)

Yangcheng Lake, the third largest freshwater lake in the Taihu Plain (118.68 km²), serves critical functions in drinking water supply, aquaculture, and ecological regulation. This study aims to address the challenge of optimizing total phosphorus load allocation and engineering project configuration in the Yangcheng Lake basin by developing a multi-objective optimization model that integrates environmental, social, and economic dimensions with the goal of achieving three specific objectives: (1) maximizing ecological benefits, (2) minimizing life-cycle costs, and (3) minimizing the environmental Gini coefficient. The NSGA-II algorithm was used, with hyperparameters calibrated via orthogonal experiments and HV-GD evaluation. Under a normal flow year scenario, total phosphorus (TP) load allocation was optimized for an agricultural watershed where livestock manure contributes 86.5% of TP pollution. Five selection strategies (Economic Priority, Ecological Priority, Equity Priority, Ideal Point Method, Game Theory) were applied to the Pareto front. Results show synergy between ecological and equity objectives, both competing with economic cost. Optimal hyperparameters were a population size of 1000 and 1000 iterations. Among strategies, the Ideal Point Method achieved the best compromise (economic cost: 5772.7; Gini coefficient < 0.30). The proposed framework provides scientific support for pollution load allocation in plain river network regions, helping decision-makers balance economic development, ecological protection, and social equity. Full article

Excessive bait wastage is a major issue in aquaculture, leading to higher farming costs, economic losses, and water pollution caused by bacterial growth from unremoved residual bait. To address this problem, we propose a bait residue detection and counting model named YOLOv8-BaitScan, based on an improved YOLO architecture. The key innovations are as follows: (1) By incorporating the channel prior convolutional attention (CPCA) into the final layer of the backbone, the model efficiently extracts spatial relationships and dynamically allocates weights across the channel and spatial dimensions. (2) The minimum points distance intersection over union (MPDIoU) loss function improves the model’s localization accuracy for bait bounding boxes. (3) The structure of the Neck network is optimized by adding a tiny-target detection layer, which improves the recall rate for small, distant bait targets and significantly reduces the miss rate. (4) We design the lightweight detection head named Detect-Efficient, incorporating the GhostConv and C2f-GDC module into the network to effectively reduce the overall number of parameters and computational cost of the model. The experimental results show that YOLOv8-BaitScan achieves strong performance across key metrics: The recall rate increased from 60.8% to 94.4%, mAP@50 rose from 80.1% to 97.1%, and the model’s number of parameters and computational load were reduced by 55.7% and 54.3%, respectively. The model significantly improves the accuracy and real-time detection capabilities for underwater bait and is more suitable for real-world aquaculture applications, providing technical support to achieve both economic and ecological benefits. Full article

This study was conducted to evaluate the impact of riparian buffer zones on water quality in the Jinghe watershed, China. To evaluate the effectiveness of riparian buffers in reducing sediments and nutrients in surface runoff, we employed two validated models: the agricultural non-point source pollution model (AnnAGNPS) and the riparian ecosystem management model (REMM). The AnnAGNPS was used to divide the catchment into homogeneous drainage areas and generate upland loadings for the REMM. The REMM model was then utilized to assess the impact of different riparian buffer designs on sediments and nutrient reduction in surface runoff. We tested five designs, including the recommended standard design by the United States Department of Agriculture (USDA). This design with 20 m herbaceous perennials next to the field (Zone 3), followed by a 20 m wide harvestable deciduous forest in the middle (Zone 2), and a 10 m wide non-harvestable deciduous forest adjacent to the river (Zone 1). We also evaluated alternative designs, such as removing Zone 3, removing Zone 2, and reducing the widths of the buffer zones further. For the entire Jinghe watershed, we calculated, compared, and analyzed the annual totals of water inflow, sediment yields, and dissolved nitrogen in surface runoff into and out of Zone 1, 2, and 3 for all the designs. The analysis indicated that the removal efficiency of sediments ranged from 85.7% to 90.8%, and the removal efficiency of dissolved nitrogen in surface runoff ranged from 85.4% to 91.9% for all the designs. It is also indicated that riparian buffer zones are highly effective in reducing sediments and nutrients in agricultural runoff, even with reduced buffer widths. This finding underscores the importance of implementing riparian buffer zones as a valuable approach in the agricultural intensive watershed with constraints for allocating for the creation of standard riparian buffers. Full article

In order to control the discharge of regional total pollutants in the region and improve the ability of water environment management and decision making, a multi-objective decision-making optimization model of water pollution load allocation was constructed, which took into account economy and fairness. The model takes the maximum environmental benefit and the minimum weighted comprehensive Gini coefficient as the objective function and takes into account the uncertainty and multi-objectives of the model, which is conducive to promoting economic development and ensuring the fairness of regional water pollutant discharge. A method based on Monte Carlo simulation coupled with a genetic algorithm was designed to obtain the optimal solution set through multiple simulation optimization. This model is applied to Anhui Province to solve the allocation optimization problem of total pollutant reduction in the 13th Five-Year Energy Conservation and Emission Reduction Plan. After the optimization of water pollution load distribution, the comprehensive Gini coefficients of COD and NH₃-N are reduced by different ranges. The comprehensive Gini coefficient after COD optimization decreased by 2.4–4.6%, and the comprehensive Gini coefficient after NH₃-N optimization decreased by 25.1–32.5%, which verified the feasibility and rationality of the model in the optimal allocation of the total discharge of regional water pollutants. The model takes into account uncertain subjective and objective factors that have an important impact on water pollutant discharge targets and decision variables, thus optimizing the total emissions of the entire regional control unit in both space and time. Full article

Urbanization and climate change have deteriorated the runoff water circulation and quality in urban areas worldwide. Consequently, low-impact development (LID) and green infrastructure (GI) techniques have been applied to manage impermeable land and non-point source pollutants. Herein, the impacts of urban characteristics, sewer system type, and precipitation intensity on surface runoff were analyzed using the Storm Water Management Model (SWMM) to derive an effective water circulation strategy for urban and complex areas through the optimal allocation of LID/GI strategies. The runoff rates were estimated to be 77.9%, 37.8%, and 61.7% for urban areas with separated and combined sewer systems and complex areas with combined sewer systems, respectively. During low rainfall, runoff was intercepted in areas with combined sewer systems, and runoff and pollutant load were lower than that in areas with separated sewer system. In contrast, wastewater was diluted during heavy rainfall; however, the total pollutant load was higher than in separated areas. The analysis of scenarios according to the regional distribution of each LID type resulted in high efficiency when combined sewers were applied during the distributed placement of catchment areas. Additionally, LID infrastructure was applied in areas with separated sewers when the placement was concentrated at the end of the basin. Full article

A better understanding of river capacity for contaminants (i.e., water environmental capacity, WEC) is essential for the reasonable utilization of water resources, providing government’s with guidance about sewage discharge management, and allocating investments for pollutant reduction. This paper applied a new framework integrating a modified hydro-environmental model, Soil and Water Assessment Tool (SWAT) model, and load–duration curve (LDC) method for the dynamic estimation of the NH₃-N WEC of the data-scarce Luanhe River basin in China. The impact mechanisms of hydrological and temperature conditions on WEC are discussed. We found that 77% of the WEC was concentrated in 40% hydrological guarantee flow rates. While the increasing flow velocity promoted the pollutant decay rate, it shortened its traveling time in streams, eventually reducing the river WEC. The results suggest that the integrated framework combined the merits of the traditional LDC method and the mechanism model. Thus, the integrated framework dynamically presents the WEC’s spatiotemporal distribution under different hydrological regimes with fewer data. It can also be applied in multi-segment rivers to help managers identify hot spots for fragile water environmental regions and periods at the basin scale. Full article

Water scarcity and water pollution are essential factors limiting coordinated regional development, especially in water-deprived regions. Industrial restructuring is an effective water management solution to alleviate water scarcity and mitigate water pollution. However, due to widely existing inexact parameter information in the water resource management system, it is challenging to allocate water resources among industrial sectors. To address these problems, an export coefficient coupled with a two-stage stochastic robust programming method (EC-TSRP) was developed through integrating an export coefficient model (ECM), two-stage stochastic programming (TSP) and robust optimization. The proposed EC-TSRP model could effectively deal with the multiple uncertainties expressed as stochastic and the intervals with fluctuation ranges, and enhance the robustness of optimal plans for supporting water resource allocation among industrial sectors under complex uncertainties. It was then applied to Bayan Nur City, in arid north-west China. The optimization alternatives indicate that wheat, sheep and services would be the most sensitive sectors among all industrial sectors, when non-point source (NPS) pollution exports are restricted. In addition, comparing the EC-TSRP results with the deterministic model, the reliability of the system could be improved significantly, while the value of the objective function would be decreased slightly. The simulation results were also compared with the historical data from 2012 to 2016. Although the total revenue of Bayan Nur City would decrease by 1.52%, the pollutant loads of total nitrogen, total phosphorus and chemical oxygen demand (TN, TP and COD) would decrease by 14.5%, 7.75% and 2.07%, respectively, and total water allocation also would decrease from 4.6 billion m³ to 4.23 billion m³. Full article

Increasing pollutant emissions in the Lake Hawassa watershed (LHW) has led to a severe water quality deterioration. Allocation and quantification of responsible pollutant fluxes are suffering from scarce data. In this study, a combination of various models with monitoring data has been applied to determine the fluxes for Chemical Oxygen Demand (COD), Biochemical Oxygen Demand (BOD₅), Total Dissolved Solid (TDS), Total Nitrogen (TN), Nitrate and Nitrite-nitrogen (NOx-N), Total Phosphorous (TP) and phosphate (PO₄-P). Water, wastewater and stormwater samples were collected and analyzed at eight monitoring stations from rivers and point sources and six monitoring stations of stormwater samples. The flow simulated with soil and water assessment tool (SWAT) could be very well calibrated and validated with gauge data. This flow from SWAT model, measured flow during monitoring and pollutant concentrations were used in FLUX32 to estimate pollutant fluxes of main rivers and point sources in LHW. The formulas provided by Ethiopian Roads Authority and Gumbel’s theory of rainfall frequency analysis was employed to determine the 2-years return period rainfall depth for the City of Hawassa. The integration of HEC-GeoHMS and SCS-CN with the catchment area enabled to determine stormwater pollution load of Hawassa City. The estimated pollutant flux at each monitoring stations showed that the pollutant contribution from the point and nonpoint sources prevailing in the study area, where the maximum fluxes were observed at Tikur-Wuha sub-catchments. This station was located downstream of the two point sources and received flow from the upper streams where agricultural use is predominant. Furthermore, Hawassa city has been identified as a key pollutant load driver, owing to increased impacts from clearly identified point sources and stormwater pollutant flux from major outfalls. Agricultural activities, on the other hand, covers a large portion of the catchment and contributes significant amount to the overall load that reaches the lake. Thus, mitigation measures that are focused on pollutant flux reduction to the lake Hawassa have to target on the urban and agricultural activities. Full article

Evaluating agricultural ecology can help us to understand regional environmental status and contribute to the sustainable development of agricultural ecosystems. Furthermore, the results of eco-environmental assessment can provide data support for policy-making and agricultural production. The application of multi-source remote-sensing technology has the advantages of being fast, accurate and wide ranging. It can reveal the status of regional ecological environments, and is of great significance to monitoring their quality. In this paper, an agroecological efficiency evaluation model was constructed by combining remote sensing data and ecological index (EI). Multi-source remote-sensing data were used to obtain the evaluation index. Indicators collected from satellites, such as biological richness, vegetation cover, water network density, land stress, and pollution load, were used to quantitatively evaluate the agroecological efficiency of Rangtang County in the Tibetan Plateau. The results showed that the EI of Rangtang County increased from 61.77 to 65.10 during 2000–2020, which means that the eco-environmental quality of this area was good, and it has shown an obviously improving trend over the past 20 years. Rangtang County has converted more than 30 km²of grassland into woodland over the past 20 years. Climate change and human activities have had combined effects on the ecological environment of this area. The change in ecological environment quality is greatly affected by human disturbance. Policymakers should continue setting up nature reserves and should implement the policy of returning farmland to forests. Unreasonable grazing and rational allocation of land resources are still critical points of concern for future ecological environment construction. EI, combined with remote sensing and statistical data, is proven to be able to reasonably represent changes in ecological environment in Rangtang County, thus providing more possibilities for ecological evaluation on the Tibetan Plateau, and even the whole world. Full article

When implementing nonpoint source pollution control plans, the size or number of required controlling facilities is a very practical issue. However, quantifying nonpoint source pollution is difficult because it is generated by variable and random rainfall events. This study develops a two-stage optimization process to demonstrate the determination of the optimal bioretention cell size for tea farm pollution control. The optimization process was based on a verified watershed-scale model and a verified site-scale model. The verified watershed model was used to obtain total phosphorous (TP) reduction loads. Once the goal of watershed management was decided, the reduction loads were then allocated and the unit reduction loads were determined. Using the unit reduction loads, the verified tea farm model was used to assess the optimal bioretention cell size for tea farms. A case study using the Jinggualiao stream in the Feitsui Reservoir watershed, Taipei, Taiwan was presented. The results showed that the unit tea farm TP reduction loads were 270 g/ha-year and 326 g/ha-year to reach two water quality goals, and a total of 350 m² and 600 m² of bioretention cells were needed, respectively. A 1 to 1000 ratio of the standard bioretention cell area to the tea farm area is recommended as a general control rule. Full article

Conservation agencies need information to guide planning activities and allocation of limited mitigation resources at regional scales. Utilization of hydrological modeling tools at sub-watershed scales can adequately represent existing conditions, but information on a few discrete uncoordinated efforts cannot be scaled up to the entire region. Conversely, large scale modeling studies suffer from overgeneralization caused by needed lumping of information. In this study, a multiscale and standardized procedure was sought to characterize water and nonpoint source pollution spatiotemporal dynamics at basin-scale but through detailed field-scale analysis. The AnnAGNPS watershed pollution model was enhanced with new capabilities for simulation of large areas based on an Integrated Technology for Evaluation and Assessment of Multi-scale-hydrological Systems (ITEAMS) approach. Comparisons between the standard and proposed ITEAMS approach indicated no difference in streamflow and small underestimation of suspended sediments during high intensity rainfall events. The ITEAMS approach was applied to a basin with a total area of 3,268,691 ha which was discretized into 469,628 sub-catchments with an average size of 6.8 ha. The resulting 366 linked AnnAGNPS simulations were executed hierarchically generating estimates of water and suspended sediment yield and loads. This pilot study revealed the ITEAMS approach is a viable alternative for modeling and simulating large areas but at high spatiotemporal resolution. Full article

In traditional waste load allocation (WLA) decision making, water quality-related constraints must be satisfied. Fuzzy models, however, can be useful for policy makers to make the most reasonable decisions in an ambiguous environment, considering various surrounding environments. We developed a fuzzy WLA model that optimizes the satisfaction level by using fuzzy membership functions and minimizes the water quality management cost for policy decision makers considering given environmental and socioeconomic conditions. The fuzzy optimization problem was formulated using a max–min operator. The fuzzy WLA model was applied to the Yeongsan River basin, which is located in the southwestern part of the Korean Peninsula and Korean TMDLs were applied. The results of the fuzzy model show that the pollutant load reduction should be increased in the Gwangju 1 and Gwangju 2 wastewater treatment plants (WWTPs) and in subcatchments with high pollutant load. In particular, it is necessary to perform advanced wastewater treatment to decrease the load of 932 kg ultimate biochemical oxygen demand (BODu)/day in the large-capacity Gwangju 1 WWTP and reduce the BODu emission concentration from 4.3 to 2.7 mg/L during the low-flow season. The satisfaction level of the fuzzy model is a relatively high at 0.81. Full article

Total maximum allocated load (TMAL) is the maximum sum total of all the pollutant loading a water body can carry without surpassing the water quality criterion, which is dependent on hydrodynamics and water quality conditions. A coupled hydrodynamic and water quality model combined with field observation was used to study pollutant transport and TMAL for water environment management in Qinhuangdao (QHD) sea in the Bohai Sea in northeastern China for the first time. Temporal and spatial variations of the chemical oxygen demand (COD) concentration were investigated based on MIKE suite (Danish Hydraulic Institute, Hørsholm, Denmark). A systematic optimization approach of adjusting the upstream pollutant emission load was used to calculate TMAL derived from the predicted COD concentration. The pollutant emission load, TMAL, and pollutant reduction of Luanhe River were the largest due to the massive runoff, which was identified as the most influential driving factor for water environmental capacity and total carrying capacity of COD. The correlation analysis and Spearman coefficient indicate strong links between TMAL and forcing factors such as runoff, kinetic energy, and pollutant emission load. A comparison of total carrying capacity in 2011 and 2013 confirms that the upstream pollutant control scheme is an effective strategy to improve water quality along the river and coast. Although, the present model results suggest that a monitoring system could provide more efficient total capacity control. The outcome of this study establishes the theoretical foundation for coastal water environment management strategy in this region and worldwide. Full article

Forestland is a key land use/land cover (LULC) type that affects nonpoint source (NPS) pollution, and has great impacts on the spatiotemporal features of watershed NPS pollution. In this study, the forestland characteristics of the Chaohu Basin, China, were quantitatively represented using forestland types (FLTs), watershed forest coverage (WFC) and forest distance from the river (DFR). To clarify the impact of forests on NPS pollution, the relationship between forestland characteristics and watershed nutrient outputs (TN and TP) was explored on a monthly scale using SWAT (Soil and Water Assessment Tool) and the period simulation was 2008–2016. The results showed that: (1) the TN and TP showed similar output characteristics and the rainy season was the peak period of nitrogen and phosphorus output. (2) Among the forestland characteristics of forestland types, watershed forest coverage and forest distance from the river, watershed forest coverage and forest distance from the river had greater effects than forestland types on the control of watershed nutrient outputs (TN and TP). (3) In different forestland types, the watershed nutrient outputs intensity remained at the lowest level when the FLTs was mixed forest, with a TN output of 1244.73kg/km² and TP output of 341.39 kg/km². (4) The watershed nutrient outputs and watershed forest coverage were negatively correlated, with the highest watershed forest coverage (over 75%) reducing the TN outputs by 56.69% and the TP outputs by 53.46% compared to the lowest watershed forest coverage (below 25%), it showed that in areas with high forest land coverage, the non-point source pollution load in the watershed is smaller than in other areas. (5) forest distance from the river had an uncertain effect on the TN and TP output of the basin, the forestland itself is a source of pollution, but it also has the function of intercepting pollution movement; the forest distance from the river in the range of 500–1000 m had the lowest NPS pollution. Considering the different forest characteristics and topographical factors, an optimal allocation mode of differentiated forest land was proposed, these suggestions will provide a scheme for surface source pollution prevention and control in the basin. This research gap is the basis of real forestland optimization. We may optimize the forestland layout for NPS pollution prevention and control by clarifying the internal mechanism. Full article

Water shortage, water pollution, shrinking water area and water mobility are the main contents of the water resources crisis, which are widespread in the social and economic development of Jilin Province. In this paper, a three-stage hybrid model integrating evaluation, prediction and regulation is constructed by combining the load-balance method and the system dynamics method. Using this model, the current states of water resources carrying capacity (WRCC) in 2017 and the trend of water demand/available from 2018 to 2030 were obtained. Using the orthogonal test method, the optimal combination program of agricultural and industrial water efficiency regulation and water resources allocation was selected. The results show that the pressure of the human–water resources system in Changchun, Liaoyuan and Baicheng is greater than the support, and the other six cities are not overloaded. The water demand in Jilin Province and its nine cities will increase from 2018 to 2030, if the current socio-economic development pattern is maintained. Therefore, we change the water quantity carrying capacity index by controlling agriculture, industrial water efficiency and trans-regional water transfer. Compared with 2015, among the optimal program obtained, the change range of the water use per 10,000 RMB of agricultural output is (−5%, 25%), and the water use per 10,000 RMB of industrial added value is (−45%, −35%), and the maximum water transfer is 1.5 billion m³ per year in 2030. This study analyzes the development pattern of WRCC in the process of water conservancy modernization in Jilin Province and provides reference for other provinces to make the similar plan. Full article