Search Results (1,777)

Lake Chinchaycocha, Peru’s second-largest high-altitude lake and a Ramsar-designated wetland of international importance, is increasingly threatened by anthropogenic pollution and hydroclimatic shifts. This study integrates Sentinel-2 multispectral imagery with in situ water quality data from Peru’s National Water Observatory to assess spatiotemporal dynamics in 31 physicochemical parameters between 2018 and 2024. We evaluated 40 empirical algorithms developed globally for Sentinel-2 and tested their transferability to this ultraoligotrophic Andean system. The results revealed limited predictive accuracy, underscoring the need for localized calibration. Subsequently, we developed and validated site-specific models for ammoniacal nitrogen, electrical conductivity, major ions, and trace metals, achieving high predictive performance during the rainy season (R² up to 0.95). Notably, the study identifies consistent seasonal correlations—such as between total copper and ammoniacal nitrogen—and strong spectral responses in Band 1, linked to runoff dynamics. These findings highlight the potential of combining public monitoring data with remote sensing to enable scalable, cost-effective assessment of water quality in optically complex, high-Andean lakes. The study provides a replicable framework for integrating national datasets into operational monitoring and environmental policy. Full article

The increasing presence of ECs in aquatic environments has drawn significant attention to the need for innovative, accessible, and sustainable solutions in wastewater treatment. This review provides a comprehensive overview of the use of agricultural residues—often discarded and undervalued—as raw materials for the development of efficient bioadsorbents. Based on a wide range of recent studies, this work presents various types of materials, such as rice husks, sugarcane bagasse, and açaí seeds, that can be transformed through thermal and chemical treatments into advanced bioadsorbents capable of removing pharmaceuticals, pesticides, dyes, and in some cases, even addressing highly persistent pollutants such as PFASs. The main objectives of this review are to (1) assess agricultural-residue-derived bioadsorbents for the removal of ECs; (2) examine physical and chemical modification techniques that enhance adsorption performance; (3) evaluate their scalability and applicability in real-world treatment systems. The review also highlights key adsorption mechanisms—such as π–π interactions, hydrogen bonding, and ion exchange—alongside the influence of parameters like pH and ionic strength. The review also explores the kinetic, isothermal, and thermodynamic aspects of the adsorption processes, highlighting both the efficiency and reusability potential of these materials. This work uniquely integrates microwave-assisted pyrolysis, magnetic functionalization, and hybrid systems, offering a roadmap for sustainable water remediation. Finally, comparative performance analyses, applications using real wastewater, regeneration strategies, and the integration of these bioadsorbents into continuous treatment systems are presented, reinforcing their promising role in advancing sustainable water remediation technologies. Full article

Groundwater contamination by nitrates (NO₃⁻) and nitrites (NO₂⁻) is an urgent problem in rural areas of Eastern Europe, with profound public health and sustainability implications. This paper presents an integrated assessment of groundwater vulnerability and water quality in rural wells in the Ceanu Mare commune, Cluj County, Romania—a representative area of the Northern Transylvania Basin, characterized by diverse geological structures, intensive agricultural activities, and incomplete public water infrastructure. This study combines detailed hydrochemical analyses, household-level studies, and geological context to identify and quantify key factors influencing nitrate and microbial contamination in rural wells, providing a comprehensive perspective on water quality challenges in the central part of Romania. This study adopts a multidisciplinary approach, integrating detailed geotechnical investigations conducted through four strategically located boreholes. These are complemented by extensive hydrogeological and lithological characterization, as well as rigorous chemical and microbiological analyses of nearby wells. The results reveal persistently elevated concentrations of NO₃⁻ and NO₂⁻, commonly associated with inadequate livestock waste management and the proximity of manure storage areas. Microbiological contamination was also frequent. In this study, the NO₃⁻ levels in well water ranged from 39.7 to 48 mg/L, reaching up to 96% of the EU/WHO threshold (50 mg/L), while the NO₂⁻ concentrations varied from 0.50 to 0.69 mg/L, exceeding the legal limit (0.5 mg/L) in 87% of the sampled wells. Ammonium (NH₄⁺) was detected (0.25–0.34 mg/L) in all the wells, below the maximum allowed limit (0.5 mg/L) but indicative of ongoing organic pollution. All the well water samples were non-compliant for microbiological parameters, with E. coli detected in 100% of cases (5–13 CFU/100 mL). The regional clay–marl substrate offers only limited natural protection against pollutant infiltration, primarily due to lithological heterogeneity and discontinuities observed within the clay–marl layers in the study area. This research delivers a replicable model for rural groundwater assessment and addresses a critical gap in regional and European water safety studies. It also provides actionable recommendations for sustainable groundwater management, infrastructure development, and community risk reduction in line with EU water directives. Full article

The hydrosystem composed of Lake Togo, Lagoon of Togoville, and Lagoon of Aného is located in the coastal zone of Togo and receives important and different kinds of mining waste that cause its degradation. This study aims to evaluate the physicochemical and metallic quality of these waters and determine the possible sources of these contaminants using geostatistical, multivariate, and special analysis methods. These waters were very mineralized according to the average conductivity (15.51 mS/cm). Average contents (μg/L) in trace elements varied from 2.46 μg/L for As to 141.63 μg/L for Pb. Average levels of Cd, Pb, Cr, and Ni were significantly higher than the WHO standards. Trace elements and physicochemical parameters showed strong spatial variations with the highest values recorded downstream of the hydrosystem. The main possible source of trace element pollution was the intrusion of seawater loaded with phosphate effluent, followed by atmospheric deposition and soil leaching. This hydrosystem, therefore, deserves special attention for better planning its management. Full article

The effective assessment and improvement of water quality require analysis not only of the main river flowing into the sea but also of its tributaries, which may contribute to significant pollution. This study aimed to evaluate the physicochemical conditions of water in nine streams flowing into the Rega River between 2018 and 2022. It also sought to determine whether the water quality in these tributaries meets the standards defined by EU regulations for inland waters that serve as habitats for fish. The parameters analyzed included water temperature, dissolved oxygen (DO), pH, total suspended solids (TSSs), electrical conductivity (EC), alkalinity, total hardness (TH), biochemical oxygen demand (BOD₅), nitrite nitrogen (NO₂⁻-N), ammonium nitrogen (NH₄⁺-N), and total phosphorus (TP). The results indicated that most indicators met the requirements for waters suitable for salmonid species. Elevated concentrations of NO₂⁻-N observed across all sites were still within acceptable limits for cyprinid species. Among the parameters studied, TSSs was identified as the main factor that downgraded water quality over the study period. Principal component analysis (PCA) showed that the dominant variables influencing water chemistry were NH₄⁺-N, NO₂⁻-N, TP, EC, and chloride (Cl⁻), all of which are associated with anthropogenic sources. Full article

Deaths occur during the culture of sea bass, and if timely harvesting is not carried out, it will lead to water pollution and the continued spread of sea bass deaths. Therefore, it is necessary to promptly detect dead fish and take countermeasures. Existing object detection algorithms, when applied to the task of detecting dead sea bass, often suffer from excessive model complexity, high computational cost, and reduced accuracy in the presence of occlusion. To overcome these limitations, this study introduces YOLOv8n-Deadfish, a lightweight and high-precision detection model. First, the homemade sea bass death recognition dataset was expanded to enhance the generalization ability of the neural network. Second, the C2f-faster–EMA (efficient multi-scale attention) convolutional module was designed to replace the C2f module in the backbone network of YOLOv8n, reducing redundant calculations and memory access, thereby more effectively extracting spatial features. Then, a weighted bidirectional feature pyramid network (BiFPN) was introduced to achieve a more thorough integration of deep and shallow features. Finally, in order to compensate for the weak generalization and slow convergence of the CIoU loss function in detection tasks, the Inner-CIoU loss function was used to accelerate bounding box regression and further improve the detection performance of the model. The experimental results show that the YOLOv8n-Deadfish model has an accuracy, recall, and mean precision of 90.0%, 90.4%, and 93.6%, respectively, which is an improvement of 2.0, 1.4, and 1.3 percentage points, respectively, over the original base network YOLOv8n. The number of model parameters and GFLOPs were reduced by 23.3% and 18.5%, respectively, and the detection speed was improved from the original 304.5 FPS to 424.6 FPS. This method can provide a technical basis for the identification of dead sea bass in the process of intelligent aquaculture. Full article

The Ghris watershed in southern Morocco is a significant ecological and agricultural area. However, due to the current impacts of climate change, farming activities, and pollution, data on its quality and biological importance need to be updated. Therefore, this study aimed to evaluate the physico-chemical and biological quality of surface water in the Ghris River. The Water Quality Index (WQI) and the Iberian Biological Monitoring Working Group (IBMWP) index were used to assess water quality along four sampling sites in 2024. The collected data were analyzed with descriptive and multivariate statistics. In total, 424 benthic macroinvertebrates belonging to seven orders were identified in the surface waters of the Ghris basin. These microfauna were significantly variable among the studied sites (p < 0.05). Station S4 is significantly rich in species, including seven orders and nine families of macroinvertebrates, followed by Station S2, with seven orders and eight families. Stations S3 and S1 showed less species diversity, with three orders and one family, respectively. The Insecta comprised 95.9% of the abundance, while the Crustacea constituted just 4.1%. The physico-chemical parameters significantly surpassed (p < 0.05) the specified norms of surface water in Morocco. This indicates a decline in the water quality of the studied sites. The findings of the principal component analysis (PCA) demonstrate that the top two axes explain 87% of the cumulative variation in the data. Stations 2 and 3 are closely associated with high concentrations of pollutants, notably Cl⁻, SO₄²⁻, NO₃⁻, and K⁺ ions. Dissolved oxygen (DO) showed a slight correlation with S2 and S3, while S4 was characterized by high COD and PO₄ concentrations, low levels of mineral components (except Cl⁻), and average temperature conditions. Bioindication scores for macroinvertebrate groups ranging from 1 to 10 enabled the assessment of pollution’s influence on aquatic biodiversity. The IBMWP biotic index indicated discrepancies in water quality across the sites. This study gives the first insight and updated data on the biological and chemical quality of surface water in the Ghris River and the entire aquatic ecosystem in southeast Morocco. These data are proposed as a reference for North African and Southern European rivers. However, more investigations are needed to evaluate the impacts of farming, mining, and urbanization on the surface and ground waters in the study zone. Similarly, it is vital to carry out additional research in arid and semi-arid zones since there is a paucity of understanding regarding taxonomic and functional diversity, as well as the physico-chemical factors impacting water quality. Full article

Cresols are aromatic organic compounds widely used in industrial and agricultural production. They have been detected in large quantities in aquatic environments, posing health risks such as skin irritation, gastrointestinal stimulation, and chronic neurological effects. In this study, we investigated the exposure concentration of cresols in the water bodies of Lake Xingkai (i.e., Daxingkai and Xiaoxingkai Lakes) during four typical hydrological periods (30 April, 22 June, 5 September, and 1 November 2021), assessed the human health risk from phenolic contaminants using the mean value method, and determined the health risk of adult cresol exposure in the Lake Xingkai watershed based on local population exposure parameters. This study developed a water environmental pollution health risk assessment model based on the methodology proposed by the United States Environmental Protection Agency (US EPA). It further evaluated the health risks to humans posed by phenolic pollutants via the drinking water pathway. The results revealed that the concentration range of cresols in water bodies was between 5.91 × 10⁻¹ ng·mL⁻¹ and 6.68 ng·mL⁻¹. The adult drinking water health risk values of cresols in the Lake Xingkai watershed were between 3.15 × 10⁻⁴ and 3.57 × 10⁻³, and all water samples from the 10 sites had hazard quotient (HQ) values less than 1, indicating that the non-carcinogen risk was small or negligible. The cresol HQ value in the water of Xiaoxingkai Lake was 4.6 times that found in Daxingkai Lake. Full article

Numerous studies have been conducted employing various techniques to remove pollutants from water bodies. Among these techniques, adsorption a surface phenomenon that utilises adsorbents derived from agricultural residues has shown considerable potential for the removal of contaminants such as heavy metals. However, most of these investigations have been carried out at the laboratory scale, with limited efforts directed towards predicting the performance of these systems at an industrial level. Accordingly, the present study aims to model a packed bed column at industrial scale for the removal of Pb(II) and Ni(II) ions from aqueous solutions, employing biomass derived from oil palm residues as the adsorbent material. To achieve this, Aspen Adsorption was used as a modelling and simulation tool to evaluate the impact of bed height, inlet flow rate, and initial concentration through a parametric assessment. This evaluation incorporated the Freundlich, Langmuir, and Langmuir–Freundlich isotherm models in conjunction with the Linear Driving Force (LDF) kinetic model. The results indicated that the optimal operating parameters included a column height of 5 m, a flow rate of 250 m³/day, and an initial metal concentration of 5000 mg/L. Moreover, all models demonstrated removal efficiencies of up to 94.6% for both Pb(II) and Ni(II). An increase in bed height resulted in longer breakthrough and saturation times but led to a reduction in adsorption efficiency. Conversely, higher flow rates shortened these times yet enhanced efficiency. These findings underscore the potential of computational modelling tools as predictive instruments for evaluating the performance of adsorption systems at an industrial scale. Full article

Effluents from wastewater treatment plants (WWTPs) represent a potential pollution risk to surface waters. Moreover, the growing practice of using treated wastewater for irrigation has recently received increased attention in terms of its suitability, raising concerns about its impact on soil health, agricultural productivity, and human well-being. The aim of this study is to apply a comprehensive approach to assess the impact of wastewater from a Romanian WWTP on surface water quality and its suitability for irrigation practices. For this purpose, a set of physico-chemical parameters were analyzed, and a Water Quality Index (WQI) was developed based on Principal Component Analysis (PCA). The irrigation suitability of the effluent was further assessed using key parameters (electrical conductivity—EC; total dissolved solids—TDSs; turbidity; Biochemical Oxygen Demand—BOD₅) and specific irrigation indices (Sodium Adsorption Ratio—SAR; Permeability Index—PI; Residual Sodium Carbonate—RSC; Sodium percentage—%Na; Kelly’s ratio—KR). The results for the surface water quality indicated high contents of Na⁺ (10.2–42.5 mg/L), Cl⁻ (11.9–48.4 mg/L), and SO₄²⁻ (10.7–68.5 mg/L) downstream of the wastewater discharge point. The WQI, which reflects overall water quality for environmental health, showed excellent water quality, with a mean of 34 upstream and 47 downstream, suggesting the potential impact of treated wastewater discharge downstream. However, the irrigation indices revealed elevated sodium levels in the effluent, with %Na (up to 86%) categorizing 70% of the samples as unsuitable, while KR (up to 6.2) classified all samples as unsuitable. These findings suggest that despite a low impact on the river water, elevated sodium levels in effluent may limit suitability for irrigation, highlighting the importance of monitoring effluent water reuse. Full article

High water quality in reservoirs used for drinking water supply and located within protected areas is of crucial importance for sustainable water-resource management. This study aims to evaluate the multi-depth water quality dynamics of the Ribnica Reservoir in western Serbia, combining two standardized assessment tools: the Serbian Water Quality Index (SWQI) and the Canadian Water Quality Index (CWQI). Data collected at various depths during 2021 and 2022 were analyzed to assess physico-chemical parameters and their impact on water quality, while the absence of microbiological data was noted as a limitation affecting the comprehensiveness of the assessment. The SWQI results indicated a general improvement in water quality over time, with values ranging from medium (82) to excellent (95) in 2021 and increasing from good (89) to excellent (98) in 2022. In contrast, the CWQI revealed specific risks, notably elevated concentrations of aluminum, mercury, and chromium, and reduced dissolved oxygen levels, with overall CWQI values ranging from poor (40) to good (88) depending on depth and parameter variability. The study highlights the necessity for continuous, comprehensive monitoring, including microbiological analyses and seasonal assessments, both within the reservoir and in the Crni Rzav River and its tributaries, to better understand pollutant sources and catchment influences. Strengthening microbiological and heavy metal monitoring, along with implementing proactive management strategies, is essential for preserving the Ribnica Reservoir’s ecological integrity and securing its long-term role in drinking water provision. Full article

Co-axial electrospinning is one of the facile methods for the fabrication of core–shell metal oxides for environmental applications. Indeed, core–shell architectures featuring a magnetic core and a photocatalytic shell represent a novel approach to catalytic nanostructures in applications such as water treatment and pollutant removal via magnetic separation. This study focuses on the fabrication of novel Fe₃O₄-Fe₂NiO₄/NiO core–shell nanofibers with enhanced optical and magnetic properties using co-axial electrospinning. The aim is to optimize the fabrication parameters, particularly the amount of metal precursor in the starting solutions, to achieve well-defined core and shell structures (rather than single-phase spinels), and to investigate phase transitions, structural characteristics, as well as the optical and magnetic properties of the resulting nanofibers. Raman, XRD, and XPS results show several phases and high defect concentration in the NiO shell. The Fe₃O₄-Fe₂NiO₄/NiO core–shell nanofibers exhibit strong visible-light absorption and significant magnetization. These advanced properties highlight their potential in photocatalytic applications. Full article

This study presents a biomonitoring study of surface waters in the Krynka River basin, encompassing three major regional reservoirs: Khanzhenkovskoe, Olkhovskoe, and Zuyevskoe. These water bodies face significant anthropogenic pressure from mining effluents, industrial discharges, and domestic wastewater. Key pollutants identified are surfactants (SAAs), sulfates, phenols, chlorides, and manganese, with chemical oxygen demand (COD) exceeding regulatory limits. The research was conducted in September 2024. Based on the Specific Combinatorial Water Pollution Index, surface waters in the studied objects can be characterized as slightly polluted. To assess the negative impact of the identified pollutants on hydrobionts, the species composition of phytoplankton of the studied water bodies was analyzed. In the Olkhovskoe Reservoir and Olkhovaya River, cyanobacterial blooms (Oscillatoria agardhii G.) were observed, altering biodiversity in the Krynka River and Zuyevskoe Reservoir. Phytoplankton genera Synedra, Amphiprora, and Navicula—established bioindicators of aquatic ecosystem health—were dominant in Khanzhenkovskoe Reservoir, signaling nutrient enrichment and organic pollution. Changes in the species composition and structure of phytoplankton in the Krynka River, its tributaries and reservoirs, indicate a change in the level of saprobic water bodies from β to α-mesosaprobic, which indicates both the general level of surface water pollution and the accumulation of pollutants along the course of the river. The paper presents the results of fluorimetric analysis of photosynthetic activity of natural phytoplankton cells and demonstrates the possibility of using fluorescence induction curves for regular monitoring measurements. Fluorescence parameters indicate a general deterioration of photosynthetic activity of natural phytoplankton. The growth of Oscillatoria agardhii in the waters of the Olkhovskoe Reservoir and of green microalgae in the Zuevskoe Reservoir led to an increase in the fluorescence quantum yield (F_v/F_m) and the total photosynthetic activity index (PI), which makes it possible to use these parameters as indicator parameters reflecting the intensity of “blooming” of various phytoplankton species. Full article

Heavy metal pollution of lake sediments is one of the prominent ecological and environmental problems worldwide, and it is of great significance to conduct research on heavy metal pollution in lake sediments to protect the ecological environment, safeguard human health, and promote sustainable development. As an integral part of Dongting Lake, Datong Lake holds a crucial ecological position. More than 10 years ago, due to a series of factors, including excessive fertilizer application and fishing, the water quality of Datong Lake declined, resulting in varying degrees of contamination by Cd, Mn, and other heavy metals in the sediments. After 2017, Datong Lake began to establish a mechanism for protecting and managing the lake, and its ecological and environmental problems have been significantly improved. To clarify the current situation of heavy metal contamination in the sediments of Datong Lake, 15 sediment samples were collected from the lake, and the contents of soil heavy metals Cd, As, Pb, Cr, Cu, Mn, Ni, and Zn were determined. A Monte Carlo simulation was introduced to carry out the ecological and human health risk evaluation of the sediments in the study area to overcome the problem of low reliability of the results of ecological and human health risk evaluation due to the randomness and incompleteness of the environmental data as well as the differences in the human body parameters. The results and conclusions show that (1) the average values of Cd, Pb, Cr, Cu, Mn, Ni, and Zn contents in the sediments of Datong Lake are higher than the background values of soil elements in the sediments of Dongting Lake, and the average values of As contents of heavy metals are lower than the background values of the soil, and the heavy metal contamination in the sediments in the study area is dominated by slight contamination, and the possibility of point-source contamination is slight. (2) The results of both the Geo-accumulation index and Enrichment factor evaluation showed that the degree of heavy metal contamination of sediments was Ni > Cu > Cr > Mn > Cd > Pb > Zn > As. (3) The average value of the single ecological risk index of heavy metal elements, in descending order, was as follows: Cd > As > Pb > Cu > Ni > Cr > Zn > Mn; all the heavy metal elements were at the level of light pollution, and the average value of the comprehensive ecological risk index was 32.83, which is a slight ecological risk level. (4) Both non-carcinogenic and carcinogenic risks for all populations in the study area remain low following heavy metal exposure via ingestion and dermal pathways. Ecological and health risk assessments identified As and Cd as exhibiting significantly higher sensitivity than other heavy metals. Consequently, continuous monitoring and source-tracking of these elements are recommended to safeguard long-term ecological integrity and public health in the region. Full article

This paper presents a study on the optimization of 2,4-Dichlorophenoxyacetic (2,4-D) acid removal from synthetic wastewater by batch Fenton-Ozonation. The aim of this study is to evaluate the potential of the catalytic system Fe-L27 coupled to ozonation in the presence and absence of H₂O₂ as an effective and affordable technique for the treatment of organic pollutants in water. Fenton-like catalysts for the removal of 2,4-D in aqueous solutions were elaborated using catalysts synthesized by the wet impregnation method. The ACs and prepared catalysts were characterized by nitrogen adsorption–desorption isotherms at 77 K, TGA, XPS, SEM, and TEM. Their efficiency as Fenton-like catalysts was studied. In a first step, a response surface modeling method was employed in order to find the optimal parameters of the Fenton process, and then the optimal O₃/H₂O₂ ratio was established at laboratory scale. Finally, the investigated advanced oxidation processes were carried out at pilot scale. The results show that Fenton-like catalysts obtained by the direct impregnation method enhance the degradation rate and mineralization of 2,4-D. Full article