Search Results (560)

Heating, Ventilation, and Air Conditioning (HVAC) systems represent a significant portion of global energy use, yet they are often operated without optimized control strategies. This study explores the application of deep learning to accurately model heating system behavior as a foundation for predictive control and energy-efficient HVAC operation. Experimental data were collected under controlled laboratory conditions, and 288 unique hyperparameter configurations were developed. Each configuration was tested three times, resulting in a total of 864 artificial neural network models. Five key hyperparameters were varied systematically: number of epochs, network size, network shape, learning rate, and optimizer. The best-performing model achieved a mean squared error of 0.469 and featured 17 hidden layers, a left-triangle architecture trained for 500 epochs with a learning rate of 5 × 10⁻⁵, and Adam as the optimizer. The results highlighted the importance of hyperparameter tuning in improving model accuracy. Future research should extend the analysis to incorporate cooling operation and real-world building operation data for broader applicability. Full article

Heating, ventilation, and air-conditioning (HVAC) systems account for the largest share of energy consumption in European Union (EU) buildings, representing approximately 40% of the final energy use and contributing significantly to carbon emissions. Latent thermal energy storage (LTES) using phase change materials (PCMs) has emerged as a promising strategy to enhance HVAC efficiency. This review systematically examines the role of latent thermal energy storage using phase change materials (PCMs) in optimizing HVAC performance to align with EU climate targets, including the Energy Performance of Buildings Directive (EPBD) and the Energy Efficiency Directive (EED). By analyzing advancements in PCM-enhanced HVAC systems across residential and commercial sectors, this study identifies critical pathways for reducing energy demand, enhancing grid flexibility, and accelerating the transition to nearly zero-energy buildings (NZEBs). The review categorizes PCM technologies into organic, inorganic, and eutectic systems, evaluating their integration into thermal storage tanks, airside free cooling units, heat pumps, and building envelopes. Empirical data from case studies demonstrate consistent energy savings of 10–30% and peak load reductions of 20–50%, with Mediterranean climates achieving superior cooling load management through paraffin-based PCMs (melting range: 18–28 °C) compared to continental regions. Policy-driven initiatives, such as Germany’s renewable integration mandates for public buildings, are shown to amplify PCM adoption rates by 40% compared to regions lacking regulatory incentives. Despite these benefits, barriers persist, including fragmented EU standards, life cycle cost uncertainties, and insufficient training. This work bridges critical gaps between PCM research and EU policy implementation, offering a roadmap for scalable deployment. By contextualizing technical improvement within regulatory and economic landscapes, the review provides strategic recommendations to achieve the EU’s 2030 emissions reduction targets and 2050 climate neutrality goals. Full article

The growing demand for energy-efficient heating, ventilation, and air conditioning (HVAC) systems has increased interest in multi-source heat pumps as a sustainable solution. While extensive research has been conducted on heat pump performance prediction, there is still a lack of practical tools for early-stage system evaluation. This study addresses that gap by developing regression-based models to estimate the performance of various heat pump configurations, including air-source, ground-source, and dual-source systems. A simplified performance estimation model was created, capable of delivering results with accuracy levels comparable to TRNSYS simulation outputs, making it a valuable and accessible tool for system evaluation. The analysis was conducted across nine climatic zones in Italy, considering key environmental factors such as air temperature, ground temperature, and solar irradiance. Among the tested configurations, hybrid systems like Solar-Assisted Ground-Source Heat Pumps (SAGSHP) achieved the highest performance, with SCOP values up to 4.68 in Palermo and SEER values up to 5.33 in Milan. Regression analysis confirmed strong predictive accuracy (R² = 0.80–0.95) and statistical significance (p < 0.05), emphasizing the models’ reliability across different configurations and climatic conditions. By offering easy-to-use regression formulas, this study enables engineers and policymakers to estimate heat pump performance without relying on complex simulations. Full article

Molds readily grow on wet books, documents, and other library materials where they ruin them chemically, mechanically, and aesthetically. Poor maintenance of libraries, failures of Heating, Ventilation, and Air Conditioning (HVAC) systems, roof leaks, and storm damage leading to flooding can all result in accelerated fungal growth. Moreover, when fungal spores are present at high concentrations in the air, they can be linked to severe respiratory conditions and possibly to other adverse health effects in humans. Climate change and the accompanying storms and floods are making the dual potential of fungi to biodegrade library holdings and harm human health more common. This essay is intended for microbiologists without much background in mycology who are called in to help librarians who are dealing with mold outbreaks in libraries. Our goal is to demystify aspects of fungal taxonomy, morphology, and nomenclature while also recommending guidelines for minimizing mold contamination in library collections. Full article

Thermal simulations of buildings play a critical role in optimizing energy efficiency, thermal comfort, and heating, ventilation and air conditioning (HVAC) systems design. Accurate weather data is essential for reliable simulations, as local weather and climate have a significant impact on energy requirements for space heating and cooling and thermal comfort. This study conducted a literature review regarding the sources, types, and uncertainties of weather data used for thermal simulations of buildings, including typical meteorological years (TMYs) and extreme weather files under current and future climates. Additionally, this paper evaluates methods for weather data processing, including interpolation, downscaling, and synthetic generation, to improve simulation accuracy. Finally, approaches are proposed for constructing weather files for the future and extreme conditions under a changing climate. This review aims to provide a guide for researchers and practitioners to enhance the reliability of thermal modeling through informed construction, selection, and application of weather data. Full article

The advancement of high-tech industries, notably in semiconductor manufacturing, pharmaceuticals, and precision instrumentation, has imposed stringent requirements on cleanroom environments, where strict control of airborne particulates, microbial presence, temperature, and humidity is essential. However, these controlled environments incur significant energy consumption, with air conditioning systems accounting for 40–60% of total usage due to high air circulation rates, intensive treatment demands, and system resistance. In light of global carbon reduction goals and escalating energy costs, improving the energy efficiency of cleanroom heating, ventilation, and air conditioning (HVAC) systems has become a critical research priority. Recent efforts have focused on optimizing airflow distribution, integrating heat recovery technologies, and adopting low-resistance filtration to reduce energy demand while maintaining stringent environmental standards. Concurrently, artificial intelligence (AI) methods, such as machine learning, deep learning, and adaptive control, are being employed to enable intelligent, energy-efficient system operations. This review systematically examines current energy-saving technologies and strategies in cleanroom HVAC systems, assesses their real-world performance, and highlights emerging trends. The objective is to provide a scientific basis for the green design, operation, and retrofit of cleanrooms, thereby supporting the industry’s transition toward low-carbon, sustainable development. Full article

Smart buildings require an energy management system that can meet inhabitants’ demands with a reduced amount of energy consumed by the heating ventilation and air-conditioning system (HVAC), as well as the lighting and shading systems. This work provides a detailed review of available methods proposed in the literature for effective control of automated systems such as HVAC, lighting, shading, etc. Moreover, effective forecasting of renewable energy generations and loads, scheduling of loads, and efficient operations of thermal and electric energy storage are crucial elements for energy management systems for ensuring reliability and stability. In this work, these aspects of energy management systems, that have been popular over the last ten years, are analyzed. In addition, the development of internet-of-things (IoT)-based sensors widens the artificial intelligence (AI) and machine learning applications in smart buildings. However, this system can be vulnerable against cyber-attacks. The state of the art of AI and machine learning applications along with cyber security issues and solutions for smart building systems are discussed. Finally, some recommendations for future research trends and directions on smart building systems are provided. This work will provide a basic guideline and will also be very useful to researchers in the area of smart building systems in the future. Full article

Large-scale heating, ventilation, and air conditioning (HVAC) control systems in pharmaceutical manufacturing are characterized by complex operational parameters, delayed and often challenging fault detection, and stringent regulatory compliance requirements. To address these issues, this study presents an innovative data-driven fault detection framework that integrates Principal Component Analysis (PCA) with Nonlinear State Estimation Technology (NSET), specifically tailored for highly regulated pharmaceutical production environments. A dataset comprising 13,198 operational records was collected from the SCADA system of a pharmaceutical facility in Zhejiang, China. The data underwent preprocessing and key parameter extraction, after which a nonlinear state estimation predictive model was constructed, with PCA applied for dimensionality reduction and sensitivity enhancement. Fault detection was performed by monitoring deviations in the mixing room temperature, identifying faults when the residuals between observed and predicted values exceeded a statistically determined threshold (mean ± three standard deviations), in accordance with the Laida criterion. The framework’s effectiveness was validated through comparative analysis before and after documented fault events, including temperature sensor drift and abnormal equipment operation. Experimental results demonstrate that the proposed PCA-NSET model enables timely and accurate detection of both gradual and abrupt faults, facilitating early intervention and reducing potential production downtime. Notably, this framework outperforms traditional fault detection methods by providing higher sensitivity and specificity, while also supporting continuous quality assurance and regulatory compliance in pharmaceutical HVAC applications. The findings underscore the practical value and novelty of the integrated PCA-NSET approach for robust, real-time fault detection in mission-critical industrial environments. Full article

Enhancing the energy management capabilities of modern smart buildings is essential for energy conservation, which is valuable for modern power networks maintaining a tight power balance under high renewable penetration. This study introduces a data-driven control strategy based on the model predictive control (MPC) for HVAC (heating, ventilation, and air conditioning) systems considering the time-of-use (ToU) electricity rates in Iraq. A multi-layer neural network is first constructed using time-delayed embedding for the modeling of building thermal dynamics, where the rectified linear unit (ReLU) is used as the activation function for the hidden layers. Based on such piecewise affine approximation, an optimization model is developed within the receding horizon control framework, which incorporates the data-driven model and is transformed into a mixed-integer linear programming facilitating efficient problem solving. To validate the efficiency of the proposed approach, a simulation model of the building’s thermal network is constructed using Simscape considering several thermal effects among the building components. Simulation results demonstrate that the proposed approach improves the economic performance of the building while maintaining thermal comfort levels within acceptable range. Full article

Heating, Ventilation and Air Conditioning (HVAC) systems are significant carbon emitters in buildings, and precise regulation is crucial for achieving carbon neutrality. Computer vision-based occupant behavior prediction provides vital data for demand-driven control strategies. Real-time multi-person pose estimation faces challenges in balancing speed and accuracy, especially in complex environments. Traditional top-down methods become computationally expensive as the number of people increases, while bottom-up methods struggle with key point mismatches in dense crowds. This paper introduces the Efficient-RTMO model, which leverages the Parameter Inverted Image Pyramid (PIIP) with hierarchical multi-scale symmetry for lightweight processing of high-resolution images and a deeper network for low-resolution images. This approach reduces computational complexity, particularly in dense crowd scenarios, and incorporates a dynamic sparse connectivity mechanism via the star-shaped dynamic feed-forward network (StarFFN). By optimizing the symmetry structure, it improves inference efficiency and ensures effective feature fusion. Experimental results on the COCO dataset show that Efficient-RTMO outperforms the baseline RTMO model, achieving more than 2× speed improvement and a 0.3 AP increase. Ablation studies confirm that PIIP and StarFFN enhance robustness against occlusions and scale variations, demonstrating their synergistic effectiveness. Full article

As the demand for sustainable heating, ventilation, and air conditioning (HVAC) solutions rises, ground source heat pumps (GSHPs) offer high efficiency but are sensitive to subsurface thermal dynamics. The overall objective of this study is to evaluate the impact of ground temperature variations on GSHP performance by proposing a semi-analytical dynamic model capable of simulating medium- to long-term heat pump operations. The proposed model accounts for the interactions between the ground heat exchanger (GHE) and the heat pump. A case study using the proposed model demonstrates how ground temperature variations from external factors affect the coefficient of performance (COP) and the heating and cooling capacity of GSHP systems. For ±5 °C ground shifts, the heating capacity falls below peak demand if the subsurface temperature drops by more than 2 °C, requiring supplemental heating. Peak cooling and capacity vary by less than 1% and 3% for every unit of ground temperature change (°C), respectively. These results quantify both the resilience and limits of GSHP sustainability under realistic thermal disturbances. Full article

Efficient carbon reduction pathways in the building sector are critical for urban decarbonization. This study predicts urban carbon emissions and establishes models to evaluate the carbon emission reduction potential of applying building low-carbon technologies (LCTs) at the urban scale. The models under consideration encompass a spectrum of active strategies, specifically heat pump (HP), rooftop photovoltaic (PV) systems, and smart heating, ventilation, and air conditioning (HVAC) systems, alongside passive strategies encompassing advanced building materials and building envelopes. The predictive calculations consider building typologies, technological evolution, adoption rates, and local policy constraints. Results indicate that by 2030, the building sector in Xi’an will account for over 30% of the city’s total carbon emissions. The integrated emission reduction effect of LCTs reaches 25.8%, with building materials contributing the most significantly at 9%. Notably, rooftop PV systems demonstrate the highest carbon reduction potential among active strategies, while HP exhibits the fastest annual growth rate in mitigation. Furthermore, the study evaluates the feasibility of these LCTs to accelerate progress toward carbon reduction goals in the building sector. Full article

Heating, ventilation, and air conditioning (HVAC) systems and microgrids have garnered significant attention in recent research, with temperature control and renewable energy integration emerging as key focus areas in urban distribution power systems. This paper proposes a robust predictive temperature control (RPTC) method and a microgrid control strategy incorporating asymmetrical challenges, including uneven power load distribution and uncertainties in renewable outputs. The proposed method leverages a thermodynamics-based R-C model to achieve precise indoor temperature regulation under external disturbances, while a multisource disturbance compensation mechanism enhances system robustness. Additionally, an HVAC load control model is developed to enable real-time dynamic regulation of airflow, facilitating second-level load response and improved renewable energy accommodation. A symmetrical power tracking and voltage support secondary controller is also designed to accurately capture and manage the fluctuating power demands of HVAC systems for supporting operations of distribution power systems. The effectiveness of the proposed method is validated through power electronics simulations in the Matlab/Simulink/SimPowerSystems environment, demonstrating its practical applicability and superior performance. Full article

Heating, ventilation, and air conditioning (HVAC) systems account for 60% of the energy consumption in commercial buildings. Each year, millions of dollars are spent on electricity bills by commercial building operators. To address this energy consumption challenge, a predictive model named Bayesian optimisation Convolution Neural Network Multivariate Long Short-term Memory (BO CNN-M-LSTM) is introduced in this research. The proposed model is designed to perform load forecasting, optimizing energy usage in commercial buildings. The CNN block extracts local features, whereas the M-LSTM captures temporal dependencies. The hyperparameter fine tuning framework applied Bayesian optimization to enhance output prediction by modifying model properties with data characteristics. Moreover, to improve occupant well-being in commercial buildings, the thermal comfort adaptive model developed by de Dear and Brager was applied to ambient temperature in the preprocessing stage. As a result, across all four datasets, the BO CNN-M-LSTM consistently outperformed other models, achieving an 8% improvement in mean percentage absolute error (MAPE), 2% in normalized root mean square error (NRMSE), and 2% in R² score.This indicates the consistent performance of BO CNN-M-LSTM under varying environmental factors, highlight the model robustness and adaptability. Hence, the BO CNN-M-LSTM model is a highly effective predictive load forecasting tool for commercial building HVAC systems. Full article

Integrating building information modeling (BIM) with Internet of things (IoT) technologies significantly enhances facility management (FM) by enabling advanced real-time monitoring of indoor environmental quality (IEQ). However, technical complexity, proprietary limitations, high software costs, and unclear long-term benefits hinder practical adoption. This study suggests a way to combine BIM and IoT using open standards like IFC and JSON, simple programming tools like Node-RED, and secure cloud services. A case study of a six-story office building showed that real-time IEQ sensor data can be combined with organized BIM information, helping to make better decisions about maintaining, replacing, or upgrading heating, ventilation, and air conditioning (HVAC) systems. This integration offers essential data needed for using advanced analysis techniques, specifically tackling issues with compatibility, ease of use, and organizational challenges, which is especially advantageous for small-to-medium-sized office buildings. Nevertheless, this study faced limitations due to restricted real-time data access from existing building management systems and preliminary predictive analytic capabilities, highlighting a need for improved direct data integration and robust analytical methods in future implementations. Full article