Search Results (51)

The use of biomass feedstocks for producing high-value-added chemicals is gaining significant attention in the academic community. In this study, near-infrared carbon dots (NIR-CDs) with antimicrobial and bioimaging functions were prepared from Epigynum auritum branches and leaves using a novel green synthesis approach. The spectral properties of the synthesized NIR-CDs were characterized by ultraviolet–visible (UV-Vis) absorption and fluorescence spectroscopy. The crystal structures of the NIR-CDs were further characterized by high-resolution transmission electron microscopy (HR-TEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance (NMR), and X-ray diffraction (XRD). The NIR-CDs exhibited minimal toxicity, excellent biocompatibility, and high penetrability in both in vivo and in vitro environments, making them ideal luminescent probes for bioimaging applications. Moreover, the antimicrobial activity of NIR-CDs was tested against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli), showing significant bacterial growth inhibition. The antimicrobial effect is likely attributed to the NIR-CDs disrupting the cell membrane integrity, leading to the leakage of the intracellular contents. Therefore, NIR-CDs hold promise as fluorescent bioimaging probes and antimicrobial agents. Full article

The problem of antibiotic abuse and drug resistance is becoming increasingly serious. In recent years, polydopamine (PDA) nanoparticles have been recognized as a potential antimicrobial material for photothermal therapy (PTT) due to their excellent photothermal conversion efficiency and unique antimicrobial ability. PDA is capable of rapidly converting light energy into heat energy under near-infrared (NIR) light irradiation to kill bacteria efficiently. In order to solve the problem of PDA’s tendency to aggregate and precipitate, this study improved its stability by grafting hyaluronic acid (HA) onto the surface of PDA. Using dopamine and hyaluronic acid as raw materials, hyaluronic acid (HA) was grafted onto polydopamine (PDA) nanoparticles via self-polymerization and Michael addition reactions under alkaline conditions to obtain PDA-HA-modified nanoparticles. We confirmed the successful grafting of hyaluronic acid via scanning electron microscopy (SEM), Fourier infrared spectroscopy (FTIR), nuclear magnetic hydrogen spectroscopy (¹H NMR), ultraviolet–visible spectroscopy (UV–vis), Raman spectroscopy (Raman), and dynamic light scattering (DLS) methods. Scanning electron microscopy (SEM) was used to observe the surface morphology and nanostructure of the grafted materials, providing information on the morphology and size distribution of the materials. Near-infrared performance experiments showed that the temperature of the PDA-HA solution increased rapidly under near-infrared light irradiation, demonstrating an excellent photothermal conversion performance. Antimicrobial properties were assessed via the colony counting method, and typical Gram-positive bacteria S. aureus and Gram-negative bacteria E. coli were selected as model strains. The experimental groups were tested under dark conditions and near-infrared (NIR) light irradiation. PDA/HA showed significant photothermal properties under NIR light irradiation, resulting in a rapid increase in the surrounding temperature to a level sufficient to kill bacteria. Under NIR light irradiation, PDA/HA exhibited 100% antimicrobial efficacy against both S. aureus and E. coli, while antimicrobial efficacy was limited under dark conditions. This indicates that the antibacterial activity of PDA/HA is highly dependent on NIR light activation. Full article

To characterize the trace-element characteristics of chrysoberyl, we studied twenty-six chrysoberyl samples from various localities by using laser ablation inductively coupled plasma mass spectrometry (LA–ICP–MS), photoluminescence (PL), and ultraviolet–visible–near-infrared (UV–Vis–NIR) spectroscopy. Chemical analysis has confirmed the existence of trace elements, including Fe, Ti, Ga, Sn, B, Cr, and V. The phenomenon of ionic isomorphic substitution frequently occurs at lattice sites within chrysoberyl. Notably, the isomorphic substitution of Al³⁺ in octahedral sites is significant, with the primary substituting elements being Fe, Ti, Cr, V, Ga, and Sn. The PL spectra of chrysoberyl samples exhibit sharp peaks at 678 and 680 nm, which are attributed to Cr³⁺, even in samples in which the Cr concentration is below the detection limit of LA-ICP-MS. This demonstrates the high-sensitivity feature of PL spectroscopy. The UV–Vis–NIR spectra of chrysoberyl samples consistently exhibit a band at 440 nm, and strong double narrow bands near 367 nm and 375 nm are observed. These spectral features are associated with Fe³⁺ chromophores—specifically, Fe³⁺-Fe³⁺ pairs or clusters and Fe³⁺ ions, respectively. By combining LA–ICP–MS analysis and PL mapping on a sample exhibiting color zoning, it has been found that the darker sections contain a higher concentration of Cr compared to the lighter sections, while the concentrations of other elements remain largely consistent. In other words, subtle variations in Cr concentration may be the underlying cause of color zoning in chrysoberyl. Full article

Radiative cooling, an emerging technology that reflects sunlight and emits radiation into outer space, has gained much attention due to its energy-efficient nature and broad applicability in buildings, photovoltaic cells, and vehicles. This study focused on fabricating SiO₂-polymethyl methacrylate (PMMA) and TiO₂-SiO₂-PMMA thick films via the blade-coating method. The investigation aimed to improve cooling performance by adding TiO₂ particles to increase the coverage area and utilize the TiO₂ reflectance ability. The characterizations of the emissivity/absorptivity, solar reflectance, and microstructure of the thick films were conducted by using ultraviolet–visible/near-infrared (UV-Vis/NIR) diffuse reflection spectroscopy and scanning electron microscopy, respectively. Experimental results revealed that the maximum temperature drops of approximately 9.4 and 9.8 °C were achieved during the daytime period for SiO₂-PMMA and TiO₂-SiO₂-PMMA thick films. The total solar radiation reflectivity increased from 71.7 to 75.6% for SiO₂-PMMA radiative cooling thick films after adding TiO₂. These findings underscored the potential of TiO₂-SiO₂-PMMA thick films in advancing radiative cooling technology and cooling capabilities across various applications. Full article

A series of Sr_1−xDy_xTi_1−yNb_yO_3−δ (0.05 ≤ x, y ≤ 0.10) samples were fabricated using cold compaction, followed by sintering in a (95% N₂ + 5% H₂) reducing atmosphere. We studied the crystal structure and optical properties of Sr_1−xDy_xTi_1−yNb_yO_3−δ using X-ray diffraction (XRD) with Rietveld refinement, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and ultraviolet−visible−near-infrared (UV−VIS−NIR) spectroscopy. The sintered Sr_1−xDy_xTi_1−yNb_yO_3−δ had a tetragonal structure (I4/mcm space group). In the sintered samples, Ti ions existed as a mixture of Ti³⁺ and Ti⁴⁺, and Nb ions existed as a mixture of Nb⁴⁺ and Nb⁵⁺. The band-gap energies decreased with increasing Dy/Nb concentrations. The incorporation of Ti and Nb ions, the formation of both Ti³⁺ and Nb⁴⁺ ions, and the reduction in band-gap energies are likely highly effective for increasing the electron concentration and the corresponding electrical conductivity. Sr_1−xDy_xTi_1−yNb_yO_3−δ with high electrical conductivity is suitable for energy and electronics applications. Full article

The application of non-imaging hyperspectral sensors has significantly enhanced the study of leaf optical properties across different plant species. In this study, chlorophyll fluorescence (ChlF) and hyperspectral non-imaging sensors using ultraviolet-visible-near-infrared shortwave infrared (UV-VIS-NIR-SWIR) bands were used to evaluate leaf biophysical parameters. For analyses, principal component analysis (PCA) and partial least squares regression (PLSR) were used to predict eight structural and ultrastructural (biophysical) traits in green and purple Tradescantia leaves. The main results demonstrate that specific hyperspectral vegetation indices (HVIs) markedly improve the precision of partial least squares regression (PLSR) models, enabling reliable and nondestructive evaluations of plant biophysical attributes. PCA revealed unique spectral signatures, with the first principal component accounting for more than 90% of the variation in sensor data. High predictive accuracy was achieved for variables such as the thickness of the adaxial and abaxial hypodermis layers (R² = 0.94) and total leaf thickness, although challenges remain in predicting parameters such as the thickness of the parenchyma and granum layers within the thylakoid membrane. The effectiveness of integrating ChlF and hyperspectral technologies, along with spectroradiometers and fluorescence sensors, in advancing plant physiological research and improving optical spectroscopy for environmental monitoring and assessment. These methods offer a good strategy for promoting sustainability in future agricultural practices across a broad range of plant species, supporting cell biology and material analyses. Full article

New Nd³⁺-doped cadmium molybdato-tungstates with the chemical formula of Cd_1−3x▯_xNd_2x(MoO₄)_1−3x(WO₄)_3x (where x = 0.0283, 0.0455, 0.0839, 0.1430, 0.1875, 0.2000, 0.2500, and ▯ denotes a vacant site in the crystal lattice) were successfully synthesized by the high-temperature solid state reaction method, using CdMoO₄ and Nd₂(WO₄)₃ as the initial reactants. The structure and change in their lattice parameters as a function of Nd³⁺ ion concentration were investigated by the XRD (X-ray diffraction) method. The surface morphology and grain size of the doped materials were characterized by SEM (scanning electron microscopy). Their thermal properties and initial reactants were analyzed by DTA-TG (differential thermal analysis coupled with thermogravimetry) techniques. The optical properties of the Nd³⁺-doped cadmium molybdato-tungstates, such as optical band gap, were determined by UV–vis–NIR (ultraviolet–visible–near infrared) spectroscopy. The EPR (electron paramagnetic resonance) technique provided information on the type of magnetic interactions between Nd³⁺ ions. Full article

Optical instruments require extremely high precision, and even minor surface contamination can severely impact their performance. Peelable coatings offer an effective and non-damaging method for removing contaminants from optical surfaces. In this study, an amphiphilic polyacrylate copolymer (PMLEA) was synthesized via solution radical copolymerization using the lipophilic monomer lauryl acrylate (LA) and hydrophilic monomers ER-10, methyl methacrylate (MMA), and butyl acrylate (BA). The structure and molecular weight of the copolymer were characterized using Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), and gel permeation chromatography (GPC). The hydrophilic–lipophilic balance, surface tension, and wettability of the copolymer were analyzed through water titration, the platinum plate method, and liquid contact angle tests. The cleaning performance of the copolymer coating on quartz glass surface contaminants was evaluated using optical microscopy and Ultraviolet-Visible Near-Infrared (UV-Vis-NIR) spectroscopy. The study examined the effect of varying the ratio of LA to ER-10 on the hydrophilicity, lipophilicity, cleaning efficiency, and mechanical properties of the copolymer coating. The results showed that when the mass ratio of LA to ER-10 was 1:2, the synthesized copolymer exhibited optimal performance in removing dust, grease, and fingerprints from quartz glass surfaces. The coating had a tensile strength of 2.57 MPa, an elongation at break of 183%, and a peeling force of 2.07 N m⁻¹. Full article

The main conservation problem of p-PVC artworks is phthalate-based plasticizer migration. Phthalate migration from the bulk to the surface of the materials leads to the formation of a glossy and oily film on the outer layers, ultimately reducing the flexibility of the material. This study aimed to develop a removable coating for the preservation of contemporary artworks and design objects made of plasticized polyvinyl chloride (p-PVC). Several coatings incorporating chitosan, collagen, and cellulose ethers were assessed as potential barriers to inhibiting plasticizer migration. Analytical techniques including optical microscopy (OM), ultraviolet/visible/near-infrared spectroscopy (UV/Vis/NIR), Fourier transform infrared spectroscopy with attenuated total reflection (FTIR-ATR), and scanning electron microscopy (SEM) were utilized to evaluate the optical and chemical stability of selected coating formulations applied to laboratory p-PVC sheet specimens. Subsequently, formulations were tested on a real tangible example of a design object, ©Barbie doll, characterized by the prevalent issue of plasticizer migration. Furthermore, the results obtained with the tested formulations were evaluated by a group of conservators using a tailored survey. Finally, a suitable coating formulation capable of safeguarding plastic substrates was suggested. Full article

The immobilization of gold nanoparticle (AuNP) linear surface assemblies on polycarbonate (PC) melt surface via molding is investigated. The order of the particle assemblies is preserved during the molding process. The assemblies on PC exhibit plasmonic coupling features and dichroic properties. The structure of the assemblies is quantified based on Scanning Electron Microscopy (SEM) and image analysis data using an orientational order parameter. The transfer process from mold to melt shows high structural fidelity. The order parameter of around 0.98 reflects the orientation of the lines and remains unaffected, independent of the injection direction of the melt relative to the particle lines. This is discussed in the frame of fountain flow during injection molding. The particles were permanently fixed and withstood the injection molding process, detachment of the substrate, and extraction in boiling ethanol. The plasmonic particles coupled strongly within the dense nanoparticle lines to produce anisotropic optical properties, as quantified by dichroic ratios of 0.28 and 0.52 using ultraviolet–visible–near-infrared (UV–Vis–NIR) spectroscopy. AuNP line assemblies on a polymer surface may be a basis for plasmonic devices like surface-enhanced Raman scattering (SERS) sensors or a precursor for nanowires. Their embedding via injection molding constitutes an important link between particle-self-assembly approaches for optically functional surfaces and polymer processing techniques. Full article

The homomorphic substitution of the garnet group is common in nature. Two rare color-changing andradite garnets are studied in this paper. One color changes from yellowish-green in the presence of daylight to maroon under incandescent light; the other color changes from brownish yellow to brownish red. In this study, conventional gemological instruments, infrared (IR) spectroscopy, ultraviolet–visible–near infrared (UV–Vis–NIR) spectroscopy, Raman spectroscopy, and electron probe microanalysis (EPMA) were used to explore the gemology and coloration mechanisms of color-changing garnets. Experiments revealed that the color-changing gemstones in the study are andradite garnets. There are two transmission windows in the UV–Vis spectrum: the red region (above 650 nm) and the green region (centered at 525 nm). The chemical compositional analysis indicates that the samples are very low in Cr (<1 ppm) and high in Fe²⁺ (from 2.31 wt.% to 4.66 wt.%). The combined spectra and chemical compositional analysis show that Fe²⁺ is the main cause of the color change. Based on the IR spectrum (complex water peaks), UV–Vis–NIR spectrum (similar to that of Namibian andradite garnet), and chemical compositional analysis (low Cr content), it is concluded that color-changing andradite may be related to skarn rock genesis. Full article

The Hebrew Scroll, catalogued as Magliabekian Manuscript III 43 and belonging to the National Central Library of Florence (BNCF), is a membranous richly decorated scroll, with colorful depictions of sacred sites through the Holy Land to Lebanon along with handwritten texts in Hebrew and notes in Italian. Despite the fact that the manuscript was originally catalogued as an “object of no artistic or scientific value”, recent paleographic studies dated it to the XIV century and highlighted it as the oldest scroll still available, depicting holy places from Egypt to Lebanon. Nevertheless, precise dating, authorship, and the interpretation of its original function are still uncertain. A suite of complementary techniques was used, including photographic documentation in visible (VIS) light in diffuse light, grazing light, and transillumination, luminescence induced by ultraviolet (UV) radiation, imaging spectroscopy (IS), Macro Area X-ray Fluorescence (MA-XRF), and spot analyses such as fiber-optic reflectance spectroscopy (FORS) in the UV, VIS, and near-infrared (NIR) regions, Fourier transform infrared spectroscopy (FT-IR) in external reflectance mode (ER), and micro-Raman spectroscopy. The results of the non-invasive diagnostic campaign enabled the identification of several constituting materials (parchment, pigments, binder, and inks). The identified materials were consistent with the proposed dating and geographical manufacturing area of the artefact. Full article

Due to their appealing colors, gem quality tourmalines, particularly the blue to green Cu- and Mn-bearing Li-tourmalines known as the Paraíba type, have been of significant interest since their discovery at the end of 1980s. At the same time, the demand of other similar colored tourmalines increased. Most Paraíba-type tourmalines belong to the elbaite species; however, liddicoatite gems can also be found. Recognizing and classifying various tourmaline species, especially these valued Paraíba-type tourmalines, are important for geologists, mineralogists, mineral collectors, and gemologists. This study explores the application of Raman spectroscopy in random crystal orientations to distinguish between the elbaite and liddicoatite tourmaline species. Raman spectra were collected from faceted blue to green Li-tourmalines alongside chemical analysis using EDXRF (Energy Dispersive X-ray Fluorescence), UV-Vis-NIR (Ultraviolet-Visible-Near InfraRed Spectroscopy), and PL (Photoluminescence spectroscopy) to provide comprehensive characterization. The results show that Raman spectroscopy, particularly in the OH stretching region, is a useful tool for differentiating elbaite from liddicoatite, and this identification remains consistent regardless of crystal orientation. The fingerprint region in the Raman spectra, on the other hand, is orientation-dependent and can only differentiate the two species when detected in specific orientations. Furthermore, Paraíba-type tourmalines can be identified by visible-near infrared (Vis-NIR) spectroscopy, although not by Raman spectroscopy. Full article

Graphene oxide (GO) as a coating material for gold nanorods (AuNRs) has gained interest in reducing toxicity and improving the photothermal profiling of AuNRs. However, there is still a challenge regarding the storage of colloidal suspensions of GO-coated AuNRs (GO@AuNRs). Hence, the conjugation of GO@AuNRs to meso-tetra-(4-sulfonatophenyl)porphyrin (TPPS₄), an anionic water-soluble porphyrin, has been reported to enhance their re-dispensability and improve their phototherapeutic properties. The AuNRs and GO were synthesised using seed-mediated and Hummers’ methods, respectively. The GO@AuNRs were conjugated to TPPS₄ and characterised using ultraviolet–visible–near-infrared (UV-Vis-NIR) spectroscopy, zeta analyser, dynamic light scattering (DLS), photoluminescence spectroscopy (PL), x-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM) and Fourier-transform infrared spectroscopy (FTIR) before freeze-drying. The results showed that the AuNRs were sandwiched between GO and TPPS₄. After freeze-drying, the freeze-dried conjugate was dispensed in deionised water without adding cryoprotectants and its properties were compared to those of the unfreeze-dried conjugate. The results showed that the freeze-dried conjugate contained similar optical properties to the unfreeze-dried conjugate. However, the bare GO@AuNRs showed a change in the optical properties after freeze-drying. These results revealed that porphyrin is an excellent additive to reduce the freeze-drying stress tolerance of GO@AuNRs. The freeze-dried conjugate also showed both singlet oxygen and photothermal properties of GO@AuNRs and porphyrin. These results indicated that the freeze-dried conjugate is a promising dual photodynamic and photothermal agent, and porphyrin can act as a cryoprotectant. Full article

A series including single and mixed Ni-Co aluminates was obtained using the precursor method, with malic acid as a ligand. The malate precursors (polynuclear coordination compounds) were isolated and characterized by Fourier Transform Infrared (FTIR), Ultraviolet/Visible/Near Infrared (UV–Vis–NIR) spectroscopy, and thermal analysis. The UV–Vis–NIR spectra of the synthesized complex compounds highlighted the presence of Co²⁺ and Ni²⁺ in an octahedral environment. The thermal decomposition of these precursors led to Co_1−xNi_xAl₂O₄ (x = 0, 0.1, 0.25, 0.5, 0.75, 0.9, and 1) spinels. The effect of Ni²⁺ substitution on the structure, morphology, and optical properties of the obtained oxides was studied with the help of different characterization tools. XRD, FTIR, and Raman spectra evidenced the formation of the spinel phase. The size of the crystallites and the agglomeration degree of the particles decrease when the nickel content increases. The band gap (BG) value is not significantly influenced by the Ni substitution. The fluorescence spectra recorded for all samples show a similar pattern, but different intensities of the emission bands. Full article