Search Results (187)

This article investigates how to exploit the high-frequency mmWave for 5G-advanced and beyond, which requires new filters for the wide bandpass and its multi-sub-band. Based on the substrate-integrated waveguide (SIW), spoof surface plasmon polariton (SSPP), and metastructures, like complementary split-ring resonators (CSRRs), the development of a wide bandpass filter and a multi-sub-band filter is proposed, along with an experimental realization to verify the model. The upper and lower cutoff frequencies of the wide bandpass are controlled through an SIW-SSPP structure, whereas the corresponding wide bandpass and its multi-sub-band filters are designed through incorporating new metastructures. The frequency range of 24.25–29.5 GHz, which covers the n257, n258, and n261 bands for 5G applications, was selected for verification. The basic SIW-SSPP wide bandpass structure of 24.25–29.5 GHz was designed first. Then, by incorporating an Archimedean spiral configuration, the insertion loss within the passband was reduced from 1 dB to 0.5 dB, while the insertion loss in the high-frequency stopband was enhanced from 40 dB to 70 dB. Finally, CSRRs were integrated to effectively suppress undesired frequency components within the bandpass, thereby achieving multi-sub-band filters with low insertion losses with a triple-sub-band filter of 0.5 dB, 0.7 dB, and 0.8 dB in turn. The experimental results showed strong agreement with the design scheme, thereby confirming the rationality of the design. Full article

Background/Objectives: Romania remains a tuberculosis (TB) hotspot in the European Union, yet host-derived factors of poor outcomes are poorly characterised. We quantified circulating pro-inflammatory cytokines and examined their interplay with behavioural risk factors, the nutritional status, and the clinical course in adults hospitalised with pulmonary TB. We analysed 80 adults with microbiologically confirmed pulmonary TB and 40 respiratory symptom controls; four TB patients (5%) died during hospitalisation, all within 10 days of admission. Methods: A retrospective analytical case–control study was conducted at the Constanța regional TB referral centre (October 2020—October 2023). Patients with smear- or culture-confirmed TB were frequency-matched by sex, 10-year age band, and BMI class to culture-negative respiratory controls at a 2:1 ratio. The patients’ serum interferon-γ (IFN-γ), interleukin-1α (IL-1α), interleukin-1β (IL-1β), and tumour-necrosis-factor-α (TNF-α) were quantified within 24 h of admission; the neutrophil/lymphocyte ratio (NLR) was extracted from full blood counts. Independent predictors of in-hospital mortality were identified by multivariable logistic regression; factors associated with the length of stay (LOS) were modelled with quasi-Poisson regression. Results: The median TNF-α (24.1 pg mL⁻¹ vs. 16.2 pg mL⁻¹; p = 0.009) and IL-1β (5.34 pg mL⁻¹ vs. 3.67 pg mL⁻¹; p = 0.008) were significantly higher in the TB cases than in controls. TNF-α was strongly correlated with IL-1β (ρ = 0.80; p < 0.001), while NLR showed weak concordance with multiplex cytokine patterns. Among the patients with TB, four early deaths (5%) exhibited a tripling of TNF-α (71.4 pg mL⁻¹) and a doubling of NLR (7.8) compared with the survivors. Each 10 pg mL⁻¹ rise in TNF-α independently increased the odds of in-hospital death by 1.8-fold (95% CI 1.1–3.0; p = 0.02). The LOS (median 29 days) was unrelated to the smoking, alcohol, or comorbidity load, but varied across BMI strata: underweight, 27 days; normal weight, 30 days; overweight, 23 days (Kruskal–Wallis p = 0.03). In a multivariable analysis, under-nutrition (BMI < 18.5 kg m⁻²) prolonged the LOS by 19% (IRR 1.19; 95% CI 1.05–1.34; p = 0.004) independently of the disease severity. Conclusions: A hyper-TNF-α/IL-1β systemic signature correlates with early mortality in Romanian pulmonary TB, while under-nutrition is the dominant modifiable determinant of prolonged hospitalisation. Admission algorithms that pair rapid TNF-α testing with systematic nutritional assessment could enable targeted host-directed therapy trials and optimise bed utilisation in high-burden settings. Full article

A comprehensive investigation of the chemical bonding, electronic structure, and spectroscopic properties of the lanarkite-type Pb₂SO₅ (PSO) structure was conducted, for the first time, using density functional theory simulations. Thus, different functionals, PBE, PBE0, PBESOL, PBESOL0, BLYP, WC1LYP, and B3LYP, were used, and their results were compared to predict their fundamental properties accurately. All DFT calculations were performed using a triple-zeta valence plus polarization basis set. Among all the DFT functionals, PBE0 showed the best agreement with the experimental and theoretical data available in the literature. Our results also reveal that the [PbO₅] clusters were formed with five Pb–O bond lengths, with values of 2.29, 2.35, 2.57, 2.60, and 2.79 Å. Meanwhile, the [SO₄] clusters exhibited uniform S–O bond lengths of 1.54 Å. Also, a complete topological analysis based on Bader’s Quantum Theory of Atoms in Molecules (QTAIM) was applied to identify atom–atom interactions in the covalent and non-covalent interactions of the PSO structure. Additionally, PSO has an indirect band gap energy of 4.83 eV and an effective mass ratio ($m_h^{*}$/$m_e^{*}$) of about 0.192 (PBE0) which may, in principle, indicate a low degree of recombination of electron–hole pairs in the lanarkite structure. This study represents the first comprehensive DFT investigation of Pb₂SO₅ reported in the literature, providing fundamental insights into its electronic and structural properties. Full article

In this paper, a compact multi-split-ring resonator-based antenna is presented for wireless applications. The proposed antenna integrates multiple resonators to achieve multiband operation, where each resonator corresponds to a specific frequency band. A theoretical analysis is conducted to model the equivalent circuit of the proposed antenna, followed by an analytical study to calculate the resonant frequency of each resonator. By integrating these resonators, the proposed antenna achieves a compact size of 23 × 24 × 1.6 mm³ (0.19 × 0.2 × 0.01λ³), resulting in a size reduction of 81.6% compared to a conventional patch antenna, while maintaining gain, improving bandwidth, and providing excellent impedance matching. The proposed antenna covers the 2.4–2.8 GHz (14.55%), 3.25–3.75 GHz (14.28%) and 4.5–7.84 GHz (54.13%) frequency bands, providing acceptable gains of 1.5 dBi, 2 dBi and 3.2 dBi, respectively. The antenna was designed with CST, its performance was verified with HFSS simulations and it was validated with an equivalent circuit in ADS. Finally, the antenna was fabricated to confirm the accuracy and reliability of the simulation results, and it was found that the measurements agreed well with the simulations. This multiband functionality, combined with a compact form factor and simple feed line, makes the antenna cost-effective, easy to manufacture and suitable for various wireless communication applications, including 5G sub-6 GHz mid-band (2.5/3.5/5/5 GHz), RFID (2.45/5.8 GHz), WiMAX (2.4/3.5/5.8 GHz), Wi-Fi 5/6/6E (2.4/5/6 GHz) and WLAN (5.2/5.8 GHz). Full article

In this article, we present a triple-band Doherty power amplifier (DPA) with a Schiffman phase shifter, which achieved a 90-degree phase shift to facilitate broad frequency range operations. As the cornerstone of the triple-band DPA, the Schiffman phase shifter enabled simultaneous triple-band operations. Furthermore, the entire triple-band Doherty amplifier was designed and fabricated using GaN on SiC HEMT devices, confirming its practical applicability and robust performance. It achieved an output power of 34 dBm at the low-band (LB) frequency of 0.8 GHz, accompanied by a peak drain efficiency (DE) of 53%. Similarly, at the mid-band (MB) frequency of 1.6 GHz, the amplifier maintained an output power of 32 dBm with an identical peak DE of 45%. At the high-band (HB) frequency of 2.2 GHz, the DPA continued to deliver an output power of 33 dBm, again with a peak DE of 50%. Full article

Single-phase white-light-emitting materials, particularly 2D hybrid organic–inorganic halide perovskites, have garnered significant attention due to their strong electron–phonon interactions, which lead to broad luminescence and a notable Stokes shift resulting from self-trapped exciton recombination. However, 2D lead iodide perovskites typically display these characteristics poorly, restricting their efficiency as white-light emitters. This study presents a 2D lead iodide perovskite that incorporates a fluorinated π-conjugated aggregation-induced enhanced emission luminophore, FPCSA, as a bulky organic cation to create a quasi-2D perovskite. The FPCSA cation establishes a Type II energy level alignment with the lead iodide layer in the 2D perovskite, and a significant energy offset effectively suppresses charge transfer, enabling independent emission from both the organic and inorganic layers while facilitating self-trapped exciton formation. Under 315 nm UV excitation, this material demonstrates warm white-light emission with RGB triple-band photoluminescence stemming from the electronically decoupled FPCSA and perovskite layers. These findings provide a promising new method for designing efficient single-phase white-light-emitting materials for optoelectronic applications. Full article

The Kesikköprü iron deposit, located in the Central Anatolian Crystalline Complex, occurs in the triple contact of Kesikköprü granitoid, mafic–ultramafic rocks, and marble. The causative Kesikköprü granitoid, consisting of diorite, granodiorite, and granite, is classified as sub-alkaline, calc-alkaline, and shoshonitic, displaying metaluminous to partially peraluminous properties. Sr-Nd isotope data and the geochemical characteristics of the Kesikköprü granitoid indicate a metasomatized mantle origin, with its ultimate composition arising from crustal contamination and magma mixing along with fractional crystallization in a post-collisional setting. The ⁴⁰Ar/³⁹Ar geochronology reveals a total fusion age of 73.41 ± 0.32 Ma for the biotite of the Kesikköprü granitoid. The alteration pattern in the deposit is characterized by an endoskarn zone comprising garnet–pyroxene (±phlogopite ± epidote) and an exoskarn zone displaying a zoning of garnet (±pyroxene ± phlogopite), pyroxene (±garnet ± phlogopite ± epidote), epidote–garnet, and epidote-rich subzones. Magnetite is extracted from massive lenses within the exoskarn zones and shows vein, disseminated, banded, massive, and brecciated textures. The low potassium content of phlogopites which are associated with magnetite mineralization prevents the determination of a reliable alteration age. δ¹⁸O thermometry reveals a temperature range between 462 and 528 °C for the magnetite mineralization. According to geochemical (trace and rare earth elements), stable (δ¹⁸O, δ²H, δ³⁴S, and δ¹³C), and radiogenic (⁸⁷Sr/⁸⁶Sr and ¹⁴³Nd/¹⁴⁴Nd) isotope data, the hydrothermal fluid responsible for the alteration and mineralization is related to the Kesikköprü granitoid, from which a significant magmatic component originates initially, followed by meteoric fluids at lower temperatures (123 °C) during the late-stage formation of calcite–quartz veins. Full article

This study proposes an innovative design strategy for molybdenum disulfide (MoS₂) optoelectronic devices based on three-dimensional folded configurations. A “Z”-shaped folded MoS₂ device was fabricated through mechanical exfoliation combined with a pre-strain technique on elastic substrates. Experimental investigations reveal that the geometric folding deformation induces novel photocurrent response zones near folded regions beyond the Schottky junction area via band structure reconstruction, achieving triple polarity switching (negative–positive–negative–positive) of photocurrent. This breakthrough overcomes the single-polarity separation mechanism limitation in conventional planar devices. Scanning photocurrent microscopy demonstrates a 40-fold enhancement in photocurrent intensity at folded regions compared to flat areas, attributed to the optimization of carrier separation efficiency through a pn junction-like built-in electric field induced by the three-dimensional configuration. Voltage-modulation experiments show that negative bias (−150 mV) expands positive response regions, while +200 mV bias induces a global negative response, revealing a dynamic synergy between folding deformation and electric field regulation. Theoretical analysis identifies that the band bending and built-in electric field in folded regions constitutes the physical origin of multiple polarity reversals. This work establishes a design paradigm integrating “geometric deformation-band engineering” for regulating optoelectronic properties of two-dimensional materials, demonstrating significant application potential in programmable photoelectric sensing and neuromorphic devices. Full article

With the accelerated transition of the global energy structure towards decarbonization, the share of PV power generation in the power system continues to rise. IEA predicts PV will account for 80% of new global renewable installations during 2025–2030. However, latent faults emerging from the long-term operation of photovoltaic (PV) power plants significantly compromise their operational efficiency. The existing EL detection methods in PV plants face challenges including grain boundary interference, probe band artifacts, non-uniform luminescence, and complex backgrounds, which elevate the risk of missing small defects. In this paper, we propose a high-precision defect detection method based on BiFDRep-YOLOv8n for small target defects in photovoltaic (PV) power plants, aiming to improve the detection accuracy and real-time performance and to provide an efficient solution for the intelligent detection of PV power plants. Firstly, the visual transformer RepViT is constructed as the backbone network, based on the dual-path mechanism of Token Mixer and Channel Mixer, to achieve local feature extraction and global information modeling, and combined with the structural reparameterization technique, to enhance the sensitivity of detecting small defects. Secondly, for the multi-scale characteristics of defects, the neck network is optimized by introducing a bidirectional weighted feature pyramid network (BiFPN), which adopts an adaptive weight allocation strategy to enhance feature fusion and improve the characterization of defects at different scales. Finally, the detection head part uses DyHead-DCNv3, which combines the triple attention mechanism of scale, space, and task awareness, and introduces deformable convolution (DCNv3) to improve the modeling capability and detection accuracy of irregular defects. Full article

This paper proposes a tri-band wide-angle polarization-insensitive absorber operating in the C-band and Ku-band, based on the design concept of metal–dielectric–metal. The absorber achieves absorption efficiencies of 99.05%, 99.3%, and 97.9% at 4.23 GHz, 7.403 GHz, and 14.813 GHz, respectively. The first two absorption frequencies are in the C-band, while the third absorption frequency is in the Ku-band, both of which are commonly used in satellite communication. The designed absorber consists of three differently sized regular hexagonal rings. To analyze the interaction mechanism between the electromagnetic wave and the absorber, we applied the theory of impedance matching and equivalent media to analyze the metamaterial properties of the absorber. In addition, the equivalent circuit model of the absorber has been analyzed. We then determined the existence of coupled electromagnetic resonances between the top and bottom surfaces by analyzing the distribution of the electric field, magnetic field, and surface currents on the absorber. By varying the polarization angle and incident angle of the incoming wave, we found that the absorber exhibits polarization insensitivity and wide-angle absorption characteristics. The TE and TM waves maintain more than 90% absorption efficiency up to incident angles of 50° and 60°, respectively. The absorber’s thickness is 1.07 mm, which is 0.0154 times the wavelength corresponding to the lowest resonant frequency ${(\lambda }_0)$, and the edge length of the subunit’s regular hexagon is 7.5 mm (0.108${\lambda }_0$), making the absorber sub-wavelength in scale while maintaining its compactness. The proposed absorber operates in the C-band and Ku-band, and can be applied in the field of satellite communications, achieving functions such as electromagnetic shielding and stealth. Full article

Borophene, as a novel two-dimensional (2D) material, has garnered significant interest due to its exceptional optoelectronic properties, including anisotropic plasmonic response high carrier mobility, etc. In this work, we theoretically propose a borophene-based anisotropic metamaterial perfect absorber using the finite-difference time-domain (FDTD) method. The research results show that the proposed metamaterial exhibits triple-band perfect electromagnetic absorption characteristics when the polarization direction of electromagnetic wave is along the zigzag direction of borophene, and the resonant absorption wavelengths can be adjusted by varying the carrier mobility of borophene. Furthermore, as an application of the proposed perfect absorber, we investigate the refractive sensing properties of the borophene-based metamaterial. When the carrier density of borophene is 4.0 × 10¹⁹ m⁻², the maximum refractive index sensitivity of the designed absorber is up to 867 nm/RIU, with a figure of merit of 11.71 RIU⁻¹, which has promising applications in the field of biochemical sensing and special environmental detection. Full article

Most current hyperspectral image compression methods rely on well-designed modules to capture image structural information and long-range dependencies. However, these modules tend to increase computational complexity exponentially with the number of bands, which limits their performance under constrained resources. To address these challenges, this paper proposes a novel triple-phase hybrid framework for hyperspectral image compression. The first stage utilizes an adaptive band selection technique to sample the raw hyperspectral image, which mitigates the computational burden. The second stage concentrates on high-fidelity compression, efficiently encoding both spatial and spectral information within the sampled band clusters. In the final stage, a reconstruction network compensates for sampling-induced losses to precisely restore the original spectral details. The proposed framework, known as ARM-Net, is evaluated on seven mixed hyperspectral datasets. Compared to state-of-the-art methods, ARM-Net achieves an overall improvement of approximately 1–2 dB in both the peak signal-to-noise ratio and multiscale structural similarity index measure, as well as a reduction in the average spectral angle mapper of approximately 0.1. Full article

Since the 1960s, theorists have claimed that the electroweak force, which unifies parity-conserving electromagnetic and parity-violating weak nuclear forces, induces tiny parity-violating energy differences (10⁻¹⁰–10⁻²¹ eV) between mirror-image molecules. This study reports the dual mirror-symmetry-breaking and second-order phase transition characteristics of mirror-symmetric 7₃-helical poly(di-n-butylsilane) in n-alkanes under static (non-stirring) conditions. In particular, n-dodecane-h₂₆ significantly enhances the circular dichroism (CD) and circularly polarized luminescence (CPL) spectra. A new (−)-CD band emerges at 299 nm below T_C1 ~ 105 °C, with a helix–helix transition at T_C2 ~ 28 °C, and exhibits g_abs = +1.3 × 10⁻² at −10 °C. Synchronously, the CPL band at 340 nm exhibiting g_lum = −0.7 × 10⁻² at 60 °C inverts to g_lum = +2.0 × 10⁻² at 0 °C. Interestingly, clockwise and counterclockwise stirring of the mixture induced non-mirror-image CD spectra. n-Dodecane-d₂₆ weakens the g_abs values by an order of magnitude, and oppositely signed CD and a lower T_C1 of ~45 °C are observed. The notable H/D isotope effect suggests that the CH₃ termini of the polysilane and n-dodecane-h₂₆, which comprise a three identical nuclear spin-1/2 system in a triple-well potential, effectively work as unidirectional hindered rotors due to the handedness of nuclear-spin-dependent parity-violating universal forces. This is supported by the (−)-sign vibrational CD bands in the symmetric and asymmetric bending modes of the CH₃ group in n-dodecane-h₂₆. Full article

This paper proposes a novel method for the design of arbitrary tri-band rectifiers. This method proposes a novel multiband impedance matching network (IMN) consisting of three Transmission Lines (TLINs), which can realise the matching of source and complex impedance matching in any three bands. For the first time, a network is proposed that realises the second harmonic suppression in three bands using only three TLINs. The Harmonic Suppression Network (HSN) is independent of other parts, which reduces the interaction between TLINs and simplifies the derivation process. For demonstration, the three bands are set to 2.45, 3.5 and 5.8 GHz in the theoretical analysis of closed-form equations. The measured results show that the maximum Power Conversion Efficiencies (PCEs) are 75.4%, 71.2%, and 80.9% at a load of 200 Ω, respectively. This approach to designing compact and efficient tri-band rectifiers has great potential for wireless power transfer applications. Full article

This work presents the design of a novel fully canonical triple-mode filter with source–load coupling for 5G applications, exploiting its very compact size for the FR1 band. The design is carried out using circular waveguide technology to attain power handling and low insertion losses. The fully canonical topology allows for increasing the selectivity of the filter since the number of finite transmission zeros is equal to the order of the filter. Given that this topology needs a source–load coupling level that is not possible to achieve with the classical iris ports, coaxial probes are used as input–output ports. A systematic procedure is developed to obtain the initial geometry before the full-wave optimization. The proof of concept is verified by a manufactured prototype at 3.7 GHz with 1.1% relative bandwidth for high coverage of 5G base stations. The results show an excellent agreement between the simulation and the measurement, validating the triple-mode filter and its underlying design process. Full article