Search Results (1,186)

With the advancement of precision agriculture, Unmanned Aerial Vehicle (UAV)-based remote sensing has been increasingly employed for monitoring crop water and nutrient status due to its high flexibility, fine spatial resolution, and rapid data acquisition capabilities. This review systematically examines recent research progress and key technological pathways in UAV-based remote sensing for crop water and nutrient monitoring. It provides an in-depth analysis of UAV platforms, sensor configurations, and their suitability across diverse agricultural applications. The review also highlights critical data processing steps—including radiometric correction, image stitching, segmentation, and data fusion—and compares three major modeling approaches for parameter inversion: vegetation index-based, data-driven, and physically based methods. Representative application cases across various crops and spatiotemporal scales are summarized. Furthermore, the review explores factors affecting monitoring performance, such as crop growth stages, spatial resolution, illumination and meteorological conditions, and model generalization. Despite significant advancements, current limitations include insufficient sensor versatility, labor-intensive data processing chains, and limited model scalability. Finally, the review outlines future directions, including the integration of edge intelligence, hybrid physical–data modeling, and multi-source, three-dimensional collaborative sensing. This work aims to provide theoretical insights and technical support for advancing UAV-based remote sensing in precision agriculture. Full article

Urban and peri-urban lakes are increasingly threatened by water quality degradation due to rising anthropogenic pressures and environmental variability. This study proposes an integrated framework that combines multi-source data and machine learning to estimate and monitor three key water quality parameters: turbidity, total dissolved solids (TDS), and biological oxygen demand (BOD). Field measurements from three lakes in West Bengal, India, Rabindra Sarovar, Mirikh Lake, and Hanuman Ghat Lake, were combined with Landsat-8 satellite imagery, meteorological data, and land use information. Three modeling scenarios were developed: (i) using only remote sensing indices, (ii) combining remote sensing indices with meteorological variables, and (iii) integrating remote sensing indices, meteorological data, and land use features. Principal component analysis (PCA) was used to reduce dimensionality and redundancy. Machine learning models, namely, XGBoost, Decision Tree, and Ridge Regression, were trained and evaluated using R² and RMSE (Root Mean Square Error) metrics. The third scenario outperformed the others, with Ridge Regression achieving the highest accuracy for BOD prediction (R² = 0.99). Spatiotemporal patterns revealed persistently high BOD levels along urban lake fringes and post-monsoon spikes in turbidity and TDS, especially in agriculturally influenced zones. These patterns were closely linked to land use practices, rainfall-driven runoff, and point-source pollution. This study underscores the effectiveness of remote sensing and machine learning as scalable tools for real-time water quality monitoring, promoting sustainability through informed lake management strategies in India. Full article

The spatiotemporal heterogeneity of hydrothermal conditions during the spring sowing period profoundly shapes cropping layouts and sowing strategies. Using NASA’s GLDAS remote sensing reanalysis, we developed a continuous agricultural climate risk index that integrates three remotely driven indicators—spring sowing window days (SWDs) derived from a “continuous suitable-day” logic, the hydrothermal coordination degree (D value), and a comprehensive suitability index (SSH_SI)—thus advancing risk assessment from single metrics to a multidimensional framework. Methodologically, dominant periodic structures of spring sowing hydrothermal risk were extracted via a combination of wavelet power spectra and the global wavelet spectrum (GWS), while spatial trend-surface fitting and three-dimensional directional analysis captured spatial non-stationarity. The index’s spatial migration trajectories and centroid-evolution paths were then quantified. Results reveal pronounced gradients along the Great Wall Belt: SWD displays a “central-high, terminal-low” pattern, with sowing windows restricted to only 3–6 days in northeastern Inner Mongolia and western Liaoning but extending to 11–13 days in the central plains of Inner Mongolia and Shanxi; SSH_SI and D values form an overall “south-west high, north-east low” pattern, indicating more favorable hydrothermal coordination in southwestern areas. Temporally, although SWD and SSH_SI show no significant downward trend, their interannual variability has increased, signaling rising instability, whereas the D value declines markedly in most regions, reflecting intensified hydrothermal imbalance. The integrated risk index identifies high-risk hotspots in eastern Inner Mongolia and northern North China, and low-risk zones in western provinces such as Gansu and Ningxia. Centroid-shift analysis further uncovers a dynamic regional adjustment in optimal sowing patterns, offering scientific evidence for addressing spring sowing climate risks. These findings provide a theoretical foundation and decision support for optimizing regional cropping structures, issuing climate risk warnings, and precisely regulating spring sowing schedules. Full article

This study proposes an innovative method that integrates multi-source remote sensing technologies and artificial intelligence to meet the urgent needs of deformation monitoring and ecohydrological environment analysis in Great Wall heritage protection. By integrating synthetic aperture radar (InSAR) technology, low-altitude oblique photogrammetry models, and the three-dimensional Gaussian splatting model, an integrated air–space–ground system for monitoring and understanding the Great Wall is constructed. Low-altitude tilt photogrammetry combined with the Gaussian splatting model, through drone images and intelligent generation algorithms (e.g., generative adversarial networks), quickly constructs high-precision 3D models, significantly improving texture details and reconstruction efficiency. Based on the 3D Gaussian splatting model of the AHLLM-3D network, the integration of point cloud data and the large language model achieves multimodal semantic understanding and spatial analysis of the Great Wall’s architectural structure. The results show that the multi-source data fusion method can effectively identify high-risk deformation zones (with annual subsidence reaching −25 mm) and optimize modeling accuracy through intelligent algorithms (reducing detail error by 30%), providing accurate deformation warnings and repair bases for Great Wall protection. Future studies will further combine the concept of ecological water wisdom to explore heritage protection strategies under multi-hazard coupling, promoting the digital transformation of cultural heritage preservation. Full article

Accurate characterization of surface solar irradiance at fine spatial, temporal, and spectral resolution is central to applications such as solar energy and environmental monitoring. On the one hand, modeling radiative transfer to achieve such accuracy requires detailed characterization of a wide range of factors, including the vertical profiles of gaseous and particulate absorbers and scatterers, wavelength-resolved surface reflectivity, and the three-dimensional morphology of clouds. On the other hand, satellite-based remote sensing products typically provide top-of-the-atmosphere irradiance at coarse spatial resolutions, where individual pixels can span several kilometers, failing to capture fine-scale intra-pixel variability. In this study, we introduce a machine learning framework that integrates large-scale remote sensing satellite data with hyperlocal, second-by-second ground-based measurements from an ensemble of low-cost spectral sensors to estimate the wavelength-resolved surface solar irradiance spectra at the hyperlocal level. The satellite data are obtained from the Harmonized Sentinel-2 MSI (MultiSpectral Instrument), Level-2A Surface Reflectance (SR) product, which offers high-resolution surface reflectance data. By leveraging machine learning, we model the relationship between satellite-derived surface reflectance and ground-based spectral measurements to predict high-resolution, wavelength-resolved irradiance, using target data obtained from an NIST-calibrated reference instrument. By utilizing a low-cost sensor ensemble that is easily deployable at scale, combined with downscaled satellite data, this approach enables accurate modeling of intra-pixel variability in surface-level solar irradiance with high temporal resolution. It also enhances the utility of the Harmonized Sentinel-2 MSI data for operational remote sensing. Our results demonstrate that the model is able to estimate surface solar irradiance with an R² ≈ 0.99 across all 421 spectral bins from 360 nm to 780 nm at 1 nm resolution, offering strong potential for applications in solar energy forecasting, urban climate research, and environmental monitoring. Full article

Unmanned aerial vehicle (UAV) remote sensing has become an important tool for high-resolution tree species identification in orchards and forests. However, irregular spatial distribution, overlapping canopies, and small crown sizes still limit detection accuracy. To overcome these challenges, we propose YOLOv11-OAM, an enhanced one-stage object detection model based on YOLOv11. The model incorporates three key modules: omni-dimensional dynamic convolution (ODConv), adaptive spatial feature fusion (ASFF), and a multi-point distance IoU (MPDIoU) loss. A class-balanced augmentation strategy is also applied to mitigate category imbalance. We evaluated YOLOv11-OAM on UAV imagery of six fruit tree species—walnut, prune, apricot, pomegranate, saxaul, and cherry. The model achieved a mean Average Precision (mAP@0.5) of 93.1%, an 11.4% improvement over the YOLOv11 baseline. These results demonstrate that YOLOv11-OAM can accurately detect small and overlapping tree crowns in complex orchard environments, offering a reliable solution for precision agriculture and smart forestry applications. Full article

This review explores the biofilm architecture and drug resistance of Enterococcus faecalis in clinical and environmental settings. The biofilm in E. faecalis is a heterogeneous, three-dimensional, mushroom-like or multilayered structure, characteristically forming diplococci or short chains interspersed with water channels for nutrient exchange and waste removal. Exopolysaccharides, proteins, lipids, and extracellular DNA create a protective matrix. Persister cells within the biofilm contribute to antibiotic resistance and survival. The heterogeneous architecture of the E. faecalis biofilm contains both dense clusters and loosely packed regions that vary in thickness, ranging from 10 to 100 µm, depending on the environmental conditions. The pathogenicity of the E. faecalis biofilm is mediated through complex interactions between genes and virulence factors such as DNA release, cytolysin, pili, secreted antigen A, and microbial surface components that recognize adhesive matrix molecules, often involving a key protein called enterococcal surface protein (Esp). Clinically, it is implicated in a range of nosocomial infections, including urinary tract infections, endocarditis, and surgical wound infections. The biofilm serves as a nidus for bacterial dissemination and as a reservoir for antimicrobial resistance. The effectiveness of first-line antibiotics (ampicillin, vancomycin, and aminoglycosides) is diminished due to reduced penetration, altered metabolism, increased tolerance, and intrinsic and acquired resistance. Alternative strategies for biofilm disruption, such as combination therapy (ampicillin with aminoglycosides), as well as newer approaches, including antimicrobial peptides, quorum-sensing inhibitors, and biofilm-disrupting agents (DNase or dispersin B), are also being explored to improve treatment outcomes. Environmentally, E. faecalis biofilms contribute to contamination in water systems, food production facilities, and healthcare environments. They persist in harsh conditions, facilitating the spread of multidrug-resistant strains and increasing the risk of transmission to humans and animals. Therefore, understanding the biofilm architecture and drug resistance is essential for developing effective strategies to mitigate their clinical and environmental impact. Full article

Deep space Color Remote Sensing Images (DCRSIs) are of great significance in reconstructing the three-dimensional appearance of celestial bodies. Among them, deep space color restoration, as a means to ensure the authenticity of deep space image colors, has significant research value. The existing deep space color restoration methods have gradually evolved into a joint restoration mode that integrates color images and spectrometers to overcome the limitations of on-orbit calibration plates; however, there is limited research on theoretical models for this type of method. Therefore, this article begins with the physical process of deep space color imaging, gradually establishes a color imaging spectral model, and proposes a new color restoration method for the color restoration of Mars remote sensing images. The experiment verifies that our proposed method can significantly reduce color deviation, achieving an average of 8.43 CIE DE 2000 color deviation units, a decrease of 2.63 (23.78%) compared to the least squares method. The color deviation decreased by 21.47 (71.81%) compared to before restoration. Hence, our method can improve the accuracy of color restoration of DCRSIs in space orbit. Full article

With the growing demand for ecological monitoring and geological exploration, high-quality satellite remote-sensing imagery has become indispensable for accurate information extraction and automated analysis. However, haze reduces image contrast and sharpness, significantly impairing quality. Existing dehazing methods, primarily designed for natural images, struggle with remote-sensing images due to their complex imaging conditions and scale diversity. Given this, we propose a novel Multi-Scale Contextual Attention Generative Adversarial Network (MCA-GAN), specifically designed for satellite image dehazing. Our method integrates multi-scale feature extraction with global contextual guidance to enhance the network’s comprehension of complex remote-sensing scenes and its sensitivity to fine details. MCA-GAN incorporates two self-designed key modules: (1) a Multi-Scale Feature Aggregation Block, which employs multi-directional global pooling and multi-scale convolutional branches to bolster the model’s ability to capture land-cover details across varying spatial scales; (2) a Dynamic Contextual Attention Block, which uses a gated mechanism to fuse three-dimensional attention weights with contextual cues, thereby preserving global structural and chromatic consistency while retaining intricate local textures. Extensive qualitative and quantitative experiments on public benchmarks demonstrate that MCA-GAN outperforms other existing methods in both visual fidelity and objective metrics, offering a robust and practical solution for remote-sensing image dehazing. Full article

The development of gas sensors with high sensitivity and low operating temperatures is essential for practical applications in environmental monitoring and industrial safety. SnO₂-based gas sensors, despite their widespread use, often suffer from high working temperatures and limited sensitivity to H₂ gas, which presents significant challenges for their performance and application. This study addresses these issues by introducing a novel SnO₂-based sensor featuring a three-dimensional (3D) nanostructure, designed to enhance sensitivity and allow for room-temperature operation. This work lies in the use of a 3D anodic aluminum oxide (AAO) template to deposit SnO₂ nanoparticles through ultrasonic spray pyrolysis, followed by modification with platinum (Pt) nanoparticles to further enhance the sensor’s response. The as-prepared sensors were extensively characterized, and their H₂ sensing performance was evaluated. The results show that the 3D nanostructure provides a uniform and dense distribution of SnO₂ nanoparticles, which significantly improves the sensor’s sensitivity and repeatability, especially in H₂ detection at room temperature. This work demonstrates the potential of utilizing 3D nanostructures to overcome the traditional limitations of SnO₂-based sensors. Full article

Timely and accurate monitoring of crop nitrogen (N) status is essential for precision agriculture. UAV-based hyperspectral remote sensing offers high-resolution data for estimating plant nitrogen concentration (PNC), but its cost and complexity limit large-scale application. This study compares the performance of UAV hyperspectral data (S185 sensor) with simulated multispectral data from DJI Phantom 4 Multispectral (P4M), PlanetScope (PS), and Sentinel-2A (S2) in estimating winter wheat PNC. Spectral data were collected across six growth stages over two seasons and resampled to match the spectral characteristics of the three multispectral sensors. Three variable selection strategies (one-dimensional (1D) spectral reflectance, optimized two-dimensional (2D), and three-dimensional (3D) spectral indices) were combined with Random Forest Regression (RFR), Support Vector Machine Regression (SVMR), and Partial Least Squares Regression (PLSR) to build PNC prediction models. Results showed that, while hyperspectral data yielded slightly higher accuracy, optimized multispectral indices, particularly from PS and S2, achieved comparable performance. Among models, SVM and RFR showed consistent effectiveness across strategies. These findings highlight the potential of low-cost multispectral platforms for practical crop N monitoring. Future work should validate these models using real satellite imagery and explore multi-source data fusion with advanced learning algorithms. Full article

MXenes, a class of two-dimensional transition metal carbides and nitrides, emerged as a promising material for next-generation energy storage and corresponding applications due to their unique combination of high electrical conductivity, tunable surface chemistry, and lamellar structure. This review highlights recent advances in MXene-based composites, focusing on their integration into electrode architectures for the development of supercapacitors, batteries, and multifunctional devices, including triboelectric nanogenerators. It serves as a comprehensive overview of the multifunctional capabilities of MXene-based composites and their role in advancing efficient, flexible, and sustainable energy and sensing technologies, outlining how MXene-based systems are poised to redefine multifunctional energy platforms. Electrochemical performance optimization strategies are discussed by considering surface functionalization, interlayer engineering, scalable synthesis techniques, and integration with advanced electrolytes, with particular attention paid to the development of hybrid supercapacitors, triboelectric nanogenerators (TENGs), and wearable sensors. These applications are favored due to improved charge storage capability, mechanical properties, and the multifunctionality of MXenes. Despite these aspects, challenges related to long-term stability, sustainable large-scale production, and environmental degradation must still be addressed. Emerging approaches such as three-dimensional self-assembly and artificial intelligence-assisted design are identified as key challenges for overcoming these issues. Full article

Petrochemical complexes are spatially expansive and host diverse emission sources, making accurate monitoring of volatile organic compounds (VOCs) challenging using conventional two-dimensional methods. This study introduces Mobile-extraction Differential Optical Absorption Spectroscopy (Me-DOAS), a real-time, three-dimensional remote sensing technique for assessing benzene emissions in the Ulsan petrochemical complex, South Korea. A vehicle-mounted Me-DOAS system conducted monthly measurements throughout 2024, capturing data during four daily intervals to evaluate diurnal variation. Routes included perimeter loops and grid-based transects within core industrial zones. The highest benzene concentrations were observed in February (mean: 64.28 ± 194.69 µg/m³; geometric mean: 5.13 µg/m³), with exceedances of the national annual standard (5 µg/m³) in several months. Notably, nighttime and early morning sessions showed elevated levels, suggesting contributions from nocturnal operations and meteorological conditions such as atmospheric inversion. A total of 179 exceedances (≥30 µg/m³) were identified, predominantly in zones with benzene-handling activities. Correlation analysis revealed a significant relationship between high concentrations and specific emission sources. These results demonstrate the utility of Me-DOAS in capturing spatiotemporal emission dynamics and support its application in exposure risk assessment and industrial emission control. The findings provide a robust framework for targeted management strategies and call for integration with source apportionment and dispersion modeling tools. Full article

Cement-based batteries (CBBs) are an emerging category of multifunctional materials that combine structural load-bearing capacity with integrated electrochemical energy storage, enabling the development of self-powered infrastructure. Although previous reviews have explored selected aspects of CBB technology, a comprehensive synthesis encompassing system architectures, material strategies, and performance metrics remains insufficient. In this review, CBB systems are categorized into two representative configurations: probe-type galvanic cells and layered monolithic structures. Their structural characteristics and electrochemical behaviors are critically compared. Strategies to enhance performance include improving ionic conductivity through alkaline pore solutions, facilitating electron transport using carbon-based conductive networks, and incorporating redox-active materials such as zinc–manganese dioxide and nickel–iron couples. Early CBB prototypes demonstrated limited energy densities due to high internal resistance and inefficient utilization of active components. Recent advancements in electrode architecture, including nickel-coated carbon fiber meshes and three-dimensional nickel foam scaffolds, have achieved stable rechargeability across multiple cycles with energy densities surpassing 11 Wh/m². These findings demonstrate the practical potential of CBBs for both energy storage and additional functionalities, such as strain sensing enabled by conductive cement matrices. This review establishes a critical basis for future development of CBBs as multifunctional structural components in infrastructure applications. Full article

Leaf loss caused by pest infestations poses a serious threat to forest health. The leaf loss rate (LLR) refers to the percentage of the overall tree-crown leaf loss per unit area and is an important indicator for evaluating forest health. Therefore, rapid and accurate acquisition of the LLR via remote sensing monitoring is crucial. This study is based on drone hyperspectral and LiDAR data as well as ground survey data, calculating hyperspectral indices (HSI), multispectral indices (MSI), and LiDAR indices (LI). It employs Savitzky–Golay (S–G) smoothing with different window sizes (W) and polynomial orders (P) combined with recursive feature elimination (RFE) to select sensitive features. Using Random Forest Regression (RFR) and Convolutional Neural Network Regression (CNNR) to construct a multidimensional (horizontal and vertical) estimation model for LLR, combined with LiDAR point cloud data, achieved a three-dimensional visualization of the leaf loss rate of trees. The results of the study showed: (1) The optimal combination of HSI and MSI was determined to be W11P3, and the LI was W5P2. (2) The optimal combination of the number of sensitive features extracted by the RFE algorithm was 13 HSI, 16 MSI, and hierarchical LI (2 in layer I, 9 in layer II, and 11 in layer III). (3) In terms of the horizontal estimation of the defoliation rate, the model performance index of the CNNR_HSI model (MPI = 0.9383) was significantly better than that of RFR_MSI (MPI = 0.8817), indicating that the continuous bands of hyperspectral could better monitor the subtle changes of LLR. (4) The I-CNNR_HSI+LI, II-CNNR_HSI+LI, and III-CNNR_HSI+LI vertical estimation models were constructed by combining the CNNR_HSI model with the best accuracy and the LI sensitive to different vertical levels, respectively, and their MPIs reached more than 0.8, indicating that the LLR estimation of different vertical levels had high accuracy. According to the model, the pixel-level LLR of the sample tree was estimated, and the three-dimensional display of the LLR for forest trees under the pest stress of larch caterpillars was generated, providing a high-precision research scheme for LLR estimation under pest stress. Full article