Search Results (300)

Chile is among the leading global exporters of pulp and paper, supported by extensive plantations of Pinus radiata and Eucalyptus spp. This review synthesizes recent progress in the valorization of forestry biomass in Chile, including both established practices and emerging bio-based applications. It highlights advances in lignin utilization, nanocellulose production, hemicellulose processing, and tannin extraction, as well as developments in thermochemical conversion technologies, including torrefaction, pyrolysis, and gasification. Special attention is given to non-timber forest products and essential oils due to their potential bioactivity. Sustainability perspectives, including Life Cycle Assessments, national policy instruments such as the Circular Economy Roadmap and Extended Producer Responsibility (REP) Law, are integrated to provide context. Barriers to technology transfer and industrial implementation are also discussed. This work contributes to understanding how forestry biomass can support Chile’s transition toward a circular bioeconomy. Full article

Hydrothermal liquefaction (HTL) is a thermochemical conversion process that converts wet biomass into biocrude oil, a gas phase, a solid phase, and an aqueous phase (HTL-AP). An obstacle to the development and scaling of HTL is the volume of HTL-AP produced during the process, which has high concentrations of nitrogen and carbon and cannot be disposed of in the environment without treatment. The HTL-AP is enriched with organic compounds, particularly light polar organics and nitrogenous compounds, which are inhibitory to microbial treatment in wastewater treatment plants. For this reason, the valorization of the HTL-AP is significant for the circular economy of HTL. This review synthesizes published findings on different types of treatment of the HTL-AP for the recovery of valuable nutrients and the removal of toxic compounds. This work outlines the trade-offs of the treatments to serve as a guide for future research to address these weaknesses and improve the valorization of the HTL-AP. Furthermore, this work uniquely focuses on HTL-AP treatment for recovering plant-available nitrogen, targeting its potential use as a fertilizer. The literature highlights the importance of increasing nitrogen bioavailability in HTL-AP through two-step treatments and by selecting HTL-AP derived from protein-rich feedstocks, which offer higher initial nitrogen content. According to the current state of research, further work is needed to optimize chemical and biological treatments for nutrient recovery from HTL-AP, particularly regarding treatment scale and duration. Additionally, economic analyses across different treatment types are currently lacking, but are essential to evaluate their feasibility and practicality. Full article

A thorough understanding of fuel behaviour is essential for designing and operating thermochemical systems. Thermogravimetric analysis (TGA) is among the most widely used fuel characterization methods, offering parameters like reactivity and ignition temperature, and enabling comprehensive fuel behaviour assessment through combined indices. This study critically examines the applicability of TGA-based indices for predicting coal performance in industrial processes such as gasification and combustion, where devolatilization, ignition, and burnout stages are key. TGA-derived data are compared with results from established methods, including drop tube furnace (DTF), pulse ignition (PI), and entrained flow reactor (EFR) tests. Findings indicate that the Volatile Matter Release Index (D₂) effectively predicts DTF behaviour (R² = 0.938, max residuals: 4.1 pp), proving useful for fast devolatilization analysis. The Flammability Index (C₁) and Ignition Index (C₃) correlate well with PI results (R² = 0.927 and 0.931, max residuals: 53.3a °C), making them reliable ignition indicators. While TGA tools showed limited accuracy in burnout prediction, the proposed Modified Burnout Characteristic Index (B_1′) achieved reasonable performance (R² = 0.734, max residuals: 0.062%∙°C⁻¹). Overall, selected TGA-based indices offer strong predictive potential for key thermochemical conversion stages. Full article

After a brief characterisation of lignocellulosic biomass (LCB) in terms of its biochemical structure and the pretreatment techniques used to disrupt lignin structure and decrystallise and depolymerise cellulose, this review considers five main pathways for biochemical biomass conversion: starting with anaerobic digestion to convert various LCB feedstocks into bioproducts; considering the integration of biochemical and thermochemical processes, syngas fermentation, which has been recently developed for biofuel and chemical production, is reviewed; the production of 2G bioethanol and biobutanol from LCB waste is discussed; the literature on biohydrogen production by dark fermentation, photofermentation, and bioelectrochemical processes using microbial electrolysis cells as well as hybrid biological processes is reviewed. The conclusions and future prospects of integrating biochemical and thermochemical conversion processes of biomass are discussed and emphasised. Full article

Coastal regions of Ecuador, particularly Esmeraldas and Manabí, face significant challenges related to energy access, waste management, and sustainable agricultural development. This study evaluates the renewable energy potential of cocoa waste biomass generated by smallholder farms in these provinces. A total of 20 cocoa farms, either certified or in the process of certification under the Rainforest Alliance standard, were surveyed to quantify the volume of agricultural and agro-industrial residues. Residual biomass generation ranged from 50 to 6500 tons per year, depending on farm size, planting density, and management practices. Spatial analysis revealed that Esmeraldas holds the highest concentration of cocoa waste biomass, with some farms reaching a gross energy potential of up to 89.07 TJ/year. Using thermochemical conversion scenarios, effective energy potential was estimated, and 75% of the farms exceeded the viability threshold of 100 MWh/year. The results confirm the feasibility of cocoa biomass as a renewable energy source, mainly when managed collectively at the community level. Incorporating this waste into decentralized energy systems supports circular economy models, enhances energy self-sufficiency, and aligns with sustainable supply chain goals promoted by certification schemes. This study contributes to national efforts in energy diversification and provides a replicable model for integrating renewable energy into rural agricultural systems. Full article

Sewage sludge, as a by-product of wastewater treatment, poses severe environmental challenges due to its high moisture, ash, and heavy metal content. Thermochemical conversion technologies, including pyrolysis and gasification, offer promising pathways for transforming sludge into valuable products such as bio-oil, biochar, and syngas. This paper systematically reviews recent advancements in pyrolysis and gasification, focusing on process optimization and catalyst development to enhance product quality and energy recovery. In pyrolysis, factors such as temperature, residence time, and heating rate significantly influence product yields and properties, while catalytic and co-pyrolysis approaches further improve product structure and reduce environmental risks. In gasification, parameters like the equivalence ratio, steam-to-sludge ratio, and catalyst application are key to enhancing syngas yield and quality, with biomass co-gasification offering additional benefits. Despite substantial progress, commercialization remains challenged by high operational costs, catalyst durability, and environmental impacts. Future research should emphasize improving sludge pretreatment, optimizing thermochemical processes, developing efficient and cost-effective catalysts, and addressing critical issues such as bio-oil quality, tar management, and syngas purification to promote the industrial application of these technologies. Full article

Biomass liquefaction is a promising thermochemical route to convert lignocellulosic residues into bio-oil. This study evaluates the liquefaction behavior of 13 biomasses with varying particle sizes (0.3–2.0 mm) and moisture contents (5–11%) under mild solvolysis conditions. High-performance liquid chromatography (HPLC-RID) and thermogravimetric analysis (TGA) were used to characterize bio-oil composition and biomass properties, respectively. Maximum conversion (72%) was achieved for Miscanthus, while Ulva lactuca reached only 23% due to its low carbohydrate content. Hemicellulose-rich feedstocks showed higher yields, whereas high lignin content generally reduced conversion. Furfural was the main compound identified in the aqueous phase (up to 51 g/L), reflecting extensive pentose degradation. Laboratory and industrial-scale liquefaction of cork and eucalyptus revealed scale-dependent differences. Industrial cork bio-oil showed increased xylose (0.70 g/L) and furfural (0.40 g/L), while industrial eucalyptus exhibited elevated levels of acetic (0.46 g/L) and formic acids (0.71 g/L), indicating enhanced deacetylation and demethoxylation reactions. These findings offer valuable insights for optimizing feedstock selection and process conditions in biomass liquefaction. The valorization of lignocellulosic residues into bio-oil contributes to the development of scalable, low-carbon technologies aligned with circular economy principles and bio-based industrial strategies. Full article

With the rapid growth of the global population, increasing per capita energy demands, and waste generation, the need for innovative strategies to mitigate greenhouse gas emissions and effective waste management has become paramount. Pyrolysis, a thermochemical conversion process, facilitates the transformation of diverse biomass feedstocks, including agricultural biomass, forestry waste, and other carbonaceous wastes, into valuable biofuels such as bio-oil, biochar, and producer gas. The article reviews the benefits of pyrolysis as an effective and scalable technique for biofuel production from waste biomass. The review describes the different types of pyrolysis processes, such as slow, intermediate, fast, and catalytic, focusing on the effects of process parameters like temperature, heating rate, and residence time on biofuel yields and properties. The review also highlights the configurations and operating principles of different reactors used for pyrolysis, such as fixed bed, fluidized bed, entrained flow, plasma system, and microwaves. The review examines the factors affecting reactor performance, including energy consumption and feedstock attributes while highlighting the necessity of optimizing these systems to improve sustainability and economic feasibility in pyrolysis processes. The diverse value-added applications of biochar, bio-oil, and producer gas obtained from biomass pyrolysis are also discussed. Full article

The carbonization of chitin and chitosan presents a sustainable approach to producing nitrogen-doped carbon materials for various applications, making kinetic and thermodynamic analyses crucial for assessing their viability. Meanwhile, artificial neural network (ANN)-driven modeling not only enhances the precision of thermo-kinetic and thermodynamic estimations but also facilitates the optimization of carbonization conditions, thereby advancing the development of high-performance carbon materials. In this work, we aim to develop an ANN model to estimate weight loss as a function of temperature and heating rate during the carbonization of chitin and chitosan. The experimental average activation energies of chitosan and chitin, determined by various iso-conversional methods, were found to be 128.1–152.2 kJ/mol and 157.2–160.0 kJ/mol, respectively. The best-performing ANN architectures—NN4 for chitin (R² = 0.9995) and NN1 for chitosan (R² = 0.9997)—swiftly predicted activation energy values with commendable accuracy (R² > 0.92) without necessitating repetitive experiments. Furthermore, the estimation of thermodynamic parameters provided both a theoretical foundation and practical insights into the carbonization process of these biological macromolecules, while morpho-structural changes in the resulting chars were systematically examined across different carbonization temperatures. The results underscore the adaptability and effectiveness of ANN in analyzing the carbonization of biological macromolecules, establishing it as a reliable tool for thermochemical conversion studies. Full article

This study focuses on the production of high-density solid biofuels and high-fixed-carbon biochar from two invasive acacia species harvested in a protected area in Northwestern Spain, thereby contributing to its silviculture management challenge. It is possible to transform the initial biomass into briquettes and pellets reaching high densified values above 1300 kg/m³ and 500 kg/m³, respectively. Using thermochemical conversion processes in a simple double chamber oven, a biochar was obtained with a fixed carbon of 66%. Several parameters were analyzed and compared between the original biomass and the resulting products. The results show that an added value could be achieved without applying a complex system to transform, starting from residual biomass from invasive species. Full article

The electrocatalytic hydrogenation (ECH) of biomass-derived phenolic compounds is a promising approach to the production of value-added chemicals and biofuels in a sustainable way under moderate reaction conditions. This study provides a comprehensive comparison of electrochemical and thermochemical hydrogenation processes, highlighting their relative advantages in terms of energy efficiency, product selectivity, and environmental impact. Several electrocatalysts (Pt, Pd, Rh, Ru), membranes (Nafion, Fumasep, GO-based PEMs), and reactor configurations are tested for the selective conversion of model compounds such as phenol, guaiacol, furfural, and levulinic acid. The contributions made by the electrode material, electrolyte composition, membrane nature, and reaction conditions are critically evaluated in relation to Faradaic efficiency, conversion rates, and product selectivity. The enhancement in the performance achieved by a new catalyst architecture is emphasized, such as MOF-based systems and bimetallic/trimetallic catalysts. In addition, a demonstration of graphite-based membranes and membrane-separated slurry reactors (SSERs) is provided, for enhanced ion transport and reaction control. The results illustrate the potential of using ECH as a low-carbon, scalable, and tunable method for the upgrading of biomass. This study offers valuable insights and guidelines for the rational design of next-generation electrocatalytic systems toward green chemical synthesis and emphasizes promising perspectives for the strategic development of electrochemical technologies in the pathway of a sustainable energy economy. Full article

Sustainably produced hydrogen has the potential to substitute fossil fuels and significantly reduce CO₂ emissions. Fraunhofer UMSICHT develops a new thermochemical conversion technology to gasify ash-rich biogenic residues and waste materials that are difficult to treat with conventional gasifiers, enabling their conversion into higher-quality energy carriers such as hydrogen and syngas. Ash-rich feedstocks are difficult to convert in conventional gasification methods, as they tend to agglomerate and form slag, leading to blockages in the reactor and process disturbances. In this experimental study, hydrogen-rich syngas is produced from biogenic residual and waste materials (sewage sludge) using the Enhanced Carbon-To-X-Output (EXO) process. The EXO process is a three-stage thermochemical conversion process that consists of a combination of multi-stage gasification and a subsequent reforming step. The influence of temperature in the reforming step on the gas composition and hydrogen yield is systematically investigated. The reformer temperature of the process is gradually increased from 500 °C to 900 °C. The feedstock throughput of the pilot plant is approximately 10 kg/h. The results demonstrate that the temperature of the reforming step has a significant impact on the composition and yield of syngas as well as the hydrogen yield. By increasing the reformer temperature, the syngas yield could be enhanced. The hydrogen yield increased from 15.7 g_H2/kg_Feed to 35.7 g_H2/kg_Feed. The hydrogen content in the syngas significantly increased from 23.6 vol.% to 39 vol.%. The produced syngas can be effectively utilized for sustainable hydrogen production, as a feedstock for subsequent syntheses, or for power and heat generation. Full article

The pyrolysis of non-recyclable construction, renovation, and demolition (CRD) wood waste is a complex thermochemical process involving devolatilization, diffusion, phase transitions, and char formation. CRD wood, a low-ash biomass containing 24–32% lignin, includes both hardwood and softwood components, making it a viable heterogeneous feedstock for bioenergy production. Thermogravimetric analysis (TGA) of CRD wood residues was conducted at heating rates of 10, 20, 30, and 40 °C/min up to 900 °C, employing model-fitting (Coats–Redfern (CR)) and model-free (Ozawa–Flynn–Wall (OFW), Kissinger–Akahira–Sunose (KAS), and Friedman (FM)) approaches to determine kinetic and thermodynamic parameters. The degradation process exhibited three stages, with peak weight loss occurring at 350–400 °C. The Coats–Redfern method identified diffusion and phase interfacial models as highly correlated (R² > 0.99), with peak activation energy (E_a) at 30 °C/min reaching 114.96 kJ/mol. Model-free methods yielded E_a values between 172 and 196 kJ/mol across conversion rates (α) of 0.2–0.8. Thermodynamic parameters showed enthalpy (ΔH) of 179–192 kJ/mol, Gibbs free energy (ΔG) of 215–275 kJ/mol, and entropy (ΔS) between −60 and −130 J/mol·K, indicating an endothermic, non-spontaneous process. These results support CRD wood’s potential for biochar production through controlled pyrolysis. Full article

This review focuses on the integration of thermochemical and biochemical processes as a transformative approach to biomass conversion. By combining technologies such as anaerobic digestion, hydrothermal liquefaction, pyrolysis, and syngas fermentation, this review highlights how hybrid systems maximize resource recovery and improve energy efficiency. Key examples include the use of digestate from anaerobic digestion as a feedstock for pyrolysis or hydrothermal carbonization, enhancing biochar and hydrochar production while improving nutrient recycling. Similarly, the integration of syngas fermentation with gasification demonstrates how thermochemical products can be further valorized into biofuels under milder biochemical conditions. This review also addresses the reuse of by-products, such as the aqueous phase from hydrothermal processes, in nutrient recovery and algae cultivation, showcasing the circular potential of these systems. By emphasizing the technical and economic synergies of integrating diverse technologies, this paper outlines a clear pathway for industrial-scale adoption, contributing to sustainable energy production and reduced greenhouse gas emissions. Full article

Future decarbonization targets demand a higher penetration of renewable energy (RE) sources into the system. However, challenges such as an uneven spatial and temporal distribution of various RE sources’ potential for green electricity (GE) generation demand alternative ways to store and later utilize the generated energy. In addition to that, sustainable development goals (SDGs) highlight the need for the responsible use of resources with increased recycling and a reduction in corresponding waste generation while ensuring access to affordable, reliable, sustainable, and modern energy for all. In this paper, an attempt is made to address both the issues of biodegradable waste (BW) processing and sustainable hydrogen (SH) production through it. Thermochemical conversion technology (TCC) and, within that, especially ‘thermocatalytic reforming’ (TCR^®) technology have been explored as options to provide viable solutions. An added advantage of decentralized hydrogen production can be envisioned here that can also contribute to regional energy security to some degree. To analyze the concept, the Bavarian region in Germany, along with open-source data for bio-waste from two main sources, namely domestic household and sewage sludge (SS), were considered. Based on that, the corresponding regional hydrogen demand coverage potential was analyzed. Full article