Search Results (232)

This paper investigates the interplay between rubber network damage, carbon black (CB) network damage, heat exchange, and voiding mechanisms in filled Styrene-butadiene rubber (SBR) under cyclic loading. To do so, three carbon black filled SBR composites, SBR5, SBR30 and SBR60 are studied. The study aims to quantify molecular damage and its role in inducing reversible or irreversible heat flow and voiding behavior to inform the design of more resilient rubber composites with improved fatigue life and thermal management capabilities. The study effectively demonstrated how increasing carbon black content, particularly in SBR60, leads to a shift from mostly reversible to irreversible and cumulative damage mechanisms during cyclic loading, as evidenced by thermal, volumetric, and electrical resistivity changes. In particular, we identify a critical mechanical energy of 7 MJ.m⁻³ associated with such transition. These irreversible changes are strongly linked to the damage and re-arrangement of the carbon black filler network, as well as the rubber chains network and the formation/growth of voids, while reversible mechanisms are likely related to rubber chains alignment associated with entropic elasticity. Full article

During operation, dynamic cables endure coupled thermo-mechanical loads (mechanical: tension/bending; thermal: power transmission) that degrade stiffness, amplifying extreme responses and impairing configuration optimization. To address this, this study pioneers a multi-objective optimization framework integrating stiffness characteristics from mechanical/thermo-mechanical analyses, with objectives to minimize dynamic extreme tension and curvature under constraints of global configuration variables and safety thresholds. The framework employs a Radial Basis Function (RBF) surrogate model coupled with NSGA-II algorithm, yielding validated Pareto solutions (≤6.15% max error vs. simulations). Results demonstrate universal reduction in extreme responses across optimized configurations, with the thermo-mechanically optimized solution achieving 20.24% fatigue life enhancement. This work establishes the first methodology quantifying thermo-mechanical coupling effects on offshore cable safety and fatigue performance. This configuration design scheme exhibits better safety during actual service conditions. Full article

The cast nickel-based superalloy K417G exhibits excellent high-temperature strength, but non-equilibrium solidification during casting can cause defects such as irreparable interdendritic microporosity, which significantly degrades its fatigue and creep properties. This study uses hot isostatic pressing (HIP) to eliminate internal flaws such as porosity in the K417G alloy, aiming to improve its mechanical properties. We investigated the microstructure and mechanical properties of K417G under two thermal conditions: solution heat treatment (SHT) and hot isostatic pressing (HIP). The results indicate that HIP significantly reduces microporosity. Compared to SHT, HIP improves the mechanical performance of K417G. The creep fracture mechanism shifts from intergranular brittle fracture (SHT) to ductile fracture (HIP). Consequently, HIP increases the alloy′s creep life approximately threefold and raises its fatigue limit by about 20 MPa. This improvement is attributed to pore density reduction, which decreases stress concentration zones and homogenizes the microstructure, thereby impeding fatigue crack nucleation and extending the crack incubation period. Full article

High-Bandwidth Memory (HBM) enables the bandwidth required by modern AI and high-performance computing, yet its three dimensional stack traps heat and amplifies thermo mechanical stress. We first review how conventional solutions such as heat spreaders, microchannels, high density Through-Silicon Vias (TSVs), and Mass Reflow Molded Underfill (MR MUF) underfills lower but do not eliminate the internal thermal resistance that rises sharply beyond 12layer stacks. We then synthesize recent hybrid bonding studies, showing that an optimized Cu pad density, interface characteristic, and mechanical treatments can cut junction-to-junction thermal resistance by between 22.8% and 47%, raise vertical thermal conductivity by up to three times, and shrink the stack height by more than 15%. A meta-analysis identifies design thresholds such as at least 20% Cu coverage that balances heat flow, interfacial stress, and reliability. The review next traces the chain from Coefficient of Thermal Expansion (CTE) mismatch to Cu protrusion, delamination, and warpage and classifies mitigation strategies into (i) material selection including SiCN dielectrics, nano twinned Cu, and polymer composites, (ii) process technologies such as sub-200 °C plasma-activated bonding and Chemical Mechanical Polishing (CMP) anneal co-optimization, and (iii) the structural design, including staggered stack and filleted corners. Integrating these levers suppresses stress hotspots and extends fatigue life in more than 16layer stacks. Finally, we outline a research roadmap combining a multiscale simulation with high layer prototyping to co-optimize thermal, mechanical, and electrical metrics for next-generation 20-layer HBM. Full article

Aiming at the problems of serious pavement temperature diseases, low efficiency and high loss of ice-breaking methods, high occupancy rate of waste tires and the low utilization rate and insufficient durability of rubber particles, this paper aims to improve the service level of roads and ensure the safety of winter pavements. A pavement material with high efficiency, low carbon and environmental friendliness for active snow melting and ice breaking is developed. Firstly, NaOH, NaClO and KH550 were used to optimize the treatment of rubber particles. The hydrophilic properties, surface morphology and phase composition of rubber particles before and after optimization were studied, and the optimal treatment method of rubber particles was determined. Then, the optimized rubber particles were used to replace the natural aggregate in the polyurethane gel mixture by the volume substitution method, and the optimum polyurethane gel dosages and molding and curing processes were determined. Finally, the influence law of the road performance of RPGM was compared and analyzed by means of an indoor test, and the ice-breaking effect of RPGM was explored. The results showed that the contact angles of rubber particles treated with three solutions were reduced by 22.5%, 30.2% and 36.7%, respectively. The surface energy was improved, the element types on the surface of rubber particles were reduced and the surface impurities were effectively removed. Among them, the improvement effect of the KH550 solution was the most significant. With the increase in rubber particle content from 0% to 15%, the dynamic stability of the mixture gradually increases, with a maximum increase of 23.5%. The maximum bending strain increases with the increase in its content. The residual stability increases first and then decreases with the increase in rubber particle content, and the increase ranges are 1.4%, 3.3% and 0.5%, respectively. The anti-scattering performance increases with the increase in rubber content, and an excessive amount will lead to an increase in the scattering loss rate, but it can still be maintained below 5%. The fatigue life of polyurethane gel mixtures with 0%, 5%, 10% and 15% rubber particles is 2.9 times, 3.8 times, 4.3 times and 4.0 times higher than that of the AC-13 asphalt mixture, respectively, showing excellent anti-fatigue performance. The friction coefficient of the mixture increases with an increase in the rubber particle content, which can be increased by 22.3% compared with the ordinary asphalt mixture. RPGM shows better de-icing performance than traditional asphalt mixtures, and with an increase in rubber particle content, the ice-breaking ability is effectively improved. When the thickness of the ice layer exceeds 9 mm, the ice-breaking ability of the mixture is significantly weakened. Mainly through the synergistic effect of stress coupling, thermal effect and interface failure, the bonding performance of the ice–pavement interface is weakened under the action of driving load cycle, and the ice layer is loosened, broken and peeled off, achieving efficient de-icing. Full article

Composite sandwich structures play a significant role in various engineering applications due to their excellent strength-to-weight ratio, durability, fatigue life, acoustic performance, damping characteristics, stealth performance, and energy absorption capabilities. The optimization of these structures results in enhancing their mechanical performance, weight reduction, cost-effectiveness, and sustainability. This review provides a comprehensive analysis of recent advancements in the optimization techniques applied in the case of composite sandwich structures, focusing on structural configuration, facesheets, and innovative cores design, loading conditions, analysis methodologies, and practical applications. Various optimization procedures, single- and multi-objective algorithms, Genetic Algorithms (GAs), Particle Swarm Optimization (PSO), and Machine Learning (ML)-based optimization frameworks, as well as Finite Element (FE)-based numerical simulations, are discussed in detail. It highlights the role of core material and geometry, face sheet material selection, and manufacturing limitations in achieving optimal performance under static, dynamic, thermal, and impact loads under various boundary conditions. Furthermore, challenges such as computational efficiency, experimental validation, and trade-offs between structural weight and performance are examined. The findings of this review offer insights into the recent and future research directions of optimizing sandwich constructions, emphasizing the integration of advanced numerical techniques for analysis and efficient structural optimization. Full article

Film cooling has been increasingly applied in turbine blade cooling design due to its excellent cooling performance. Although film-cooled blades demonstrate superior cooling effectiveness, the perforation design on blade surfaces compromises structural integrity, making fatigue failure prone to occur at cooling holes. Previous studies by domestic and international scholars have extensively investigated factors influencing film cooling effectiveness, including blowing ratio and hole geometry configurations. However, most research has overlooked the investigation of fatigue life in film-cooled blades. This paper systematically investigates blade fatigue life under various cooling air parameters by analyzing the relationships among cooling effectiveness, stress distribution, and fatigue life. Results indicate that maximum stress concentrations occur at cooling hole locations and near the blade root at trailing edge regions. While cooling holes effectively reduce blade surface temperature, they simultaneously create stress concentration zones around the apertures. Both excessive and insufficient cooling air pressure and temperature reduce thermal fatigue life, with optimal parameters identified as 600 K cooling temperature and 0.75 MPa pressure, achieving a maximum thermal fatigue life of 3400 cycles for this blade configuration. A thermal shock test platform was established to conduct fatigue experiments under selected cooling conditions. Initial fatigue damage traces emerged at cooling holes after 1000 cycles, with progressive damage expansion observed. By 3000 cycles, cooling holes near blade tip regions exhibited the most severe failure, demonstrating near-complete functional degradation. These findings provide critical references for cooling parameter selection in practical aeroengine applications of film-cooled blades. Full article

This study investigates the microstructural evolution and mechanical degradation mechanisms of cold-drawn 310S stainless steel subjected to repeated thermal cycling between 900 °C and room temperature. The results reveal that thermal cycling induces significant lattice distortion, dislocation accumulation, and recrystallization, leading to grain refinement and increased tensile strength. However, these microstructural changes also initiate subsurface cracks and reduce ductility. TGA analysis confirms thermal weight loss from decarburization, especially under oxidative atmospheres. EPMA analysis and tensile tests after thermal cycling reveal that surface cracks formed during thermal cycling act as origins for transgranular crack propagation under tensile stress, significantly reducing fracture resistance. Bending fatigue tests further demonstrate that thermally fatigued specimens exhibit inferior fatigue life compared to raw material, confirming the deteriorating mechanical properties of 310S stainless steel after thermal cycling. Overall, the combined effects of thermal and mechanical fatigue degrade the structural integrity of 310S stainless steel, revealing that lattice distortion and subsurface cracking are the key factors in its embrittlement and reduced fatigue performance. Full article

Oil shale, an unconventional oil and gas resource, can generate the required hydrocarbons through high-temperature pyrolysis. In situ conversion extraction technology utilizes downhole heaters to directly inject high-temperature heat into the oil shale layer to achieve the effect of oil and gas recovery. For the metal material components of the combustion heaters, the uneven temperature fields experienced during the start of operations, processing, and end of operations can lead to fatigue conditions, such as high-temperature creep, micro-damage, and micro-deformation due to thermal effects. To prevent the occurrence of the aforementioned issues, it is necessary to conduct fatigue life analysis of downhole combustion heaters. By combining actual combustion heater operation experiments with finite element simulation, this paper analyzes the impact of temperature, structure, and stress amplitude on the fatigue life of heaters. The results indicate that the fatigue life of the heaters is most significantly influenced by the metal gaskets, and the higher the exhaust gas temperature, the lower the fatigue life of the heater. Heating operations significantly reduce the fatigue life of the heater, while cooling operations have almost no effect on the fatigue life. Circular-pore metal gaskets have a higher fatigue life than those with a square hole shape. Considering only the thickness of the metal gaskets, the thicker the gasket, the higher the fatigue life. Stress amplitude has the most significant impact on the fatigue life of the heater; when the stress amplitude is doubled, the metal gaskets quickly undergo fatigue damage. Full article

Carbon-based nanomaterials have emerged as a promising strategy for bitumen modification to enhance the mechanical and thermal performance of pavements. This review evaluates the present advancements in the inclusion of coke and carbon nanomaterials (CNMs) such as carbon nanotubes (CNTs) and graphene into bituminous systems. The findings and limitations of recent experiments in synthesis procedures along with dispersion methods are deeply explored to determine their impact on the rheological properties of bitumen as well as aging resistance and durability characteristics. Petroleum coke enhances bitumen softening points by 10–15 °C and causes up to 30% improvement in rutting resistance while simultaneously prolonging material fatigue life and aging resistance. Bitumen modification through petroleum coke faces challenges in addition to mixing difficulties due to its high viscosity. Moreover, the incorporation of CNTs and graphene as CNMs shows significant enhancements in rutting resistance with improved tensile strength, lower additive requirements, and enhanced dispersion. Both the superior mechanical properties of carbon nanomaterials and processing advancements in nano-enhanced bitumen have the capability to solve technical issues including material costs and specialized mixing processes. Combining coke with CNMs to enhance performance is a future research direction, which could result in economic and scalability considerations. This review comprehensively explores insights into physicochemical interactions, performance outcomes, and processing techniques, crucial for the development of sustainable, high-performance bitumen composites tailored for next-generation infrastructure applications. Full article

With the increasing demand for drag reduction, energy consumption reduction, and low weight in civil aircraft, high-precision microgroove preparation technology is being developed internationally to reduce wall friction resistance and save energy. Compared to mechanical processing, chemical etching, roll forming, and ultrafast laser processing, nanosecond lasers offer processing precision, high efficiency, and controllable thermal effects, enabling low-cost and high-quality preparation of microgrooves. However, the impact of nanosecond laser etching on the fatigue performance of substrate materials remains unclear, leading to controversy over whether high-precision shape control and fatigue performance enhancement in microgrooves can be achieved simultaneously. This has become a bottleneck issue that urgently needs to be addressed. This paper focuses on the current research status of nanosecond laser processing quality control for microgrooves and the research status of laser effects on enhancing the fatigue performance of substrate materials. It identifies the main existing issues: (1) how to induce surface residual compressive stress through the thermo-mechanical coupling effect of nanosecond lasers to suppress micro-defects while ensuring high-precision shape control of fixed microgrooves; and (2) how to quantify the regulation of nanosecond laser process parameters on residual stress distribution and fatigue performance in the microgroove area. To address these issues, this paper proposes a collaborative strategy for high-quality shape control and surface strengthening in fixed microgrooves, an analysis of multi-dimensional fatigue regulation mechanisms, and a new method for multi-objective process optimization. The aim is to control the geometric accuracy error of the prepared surface microgrooves within 5% and to enhance the fatigue life of the substrate by more than 20%, breaking through the technical bottleneck of separating “drag reduction design” from “fatigue resistance manufacturing”, and providing theoretical support for the integrated manufacturing of “drag reduction-fatigue resistance” in aircraft skins. Full article

This study investigates the mechanical and fatigue behaviour of friction stir composite joints fabricated from an aluminum alloy (AA6082-T6) and a glass fibre-reinforced polymer (Noryl^® GFN2) under different service temperature conditions. The joints were tested under both quasi-static and cyclic loading at three different temperatures (23, 75, and 130 °C). Fracture surfaces were analyzed, and the probabilistic S–N curves were derived using Weibull distribution. Results indicated that increasing the service temperature caused a non-linear decrease in both the quasi-static and fatigue strength of the joints. Compared to room temperature, joints tested at 75 °C and 130 °C showed a 10% and 50% reduction in average tensile strength, respectively. The highest fatigue strength occurred at 23 °C, while the lowest was at 130 °C, in line with the quasi-static results. Fatigue stress-life plots displayed a semi-logarithmic nature, with lives ranging from 10² to 10⁵ cycles for stress amplitudes between 7.7 and 22.2 MPa at 23 °C, 7.2 to 19.8 MPa at 75 °C, and 6.2 to 13.5 MPa at 130 °C. The joints’ failure occurred in the polymeric base material close to joints’ interface, highlighting the critical role of the polymer in limiting joints’ performance, as confirmed by thermal and scanning electron microscopy analyses. Full article

The heat treatment residual stress of 8Cr4Mo4V steel bearings seriously affects the contact fatigue life. The micro stress concentration at the carbide interface leads to the initiation of micro cracks. Therefore, in this paper, the systematic analysis of heat treatment residual stress of 8Cr4Mo4V steel is conducted. FEA was used to analyze the residual stress of type I after heat treatment process. Based on numerical simulation and EBSD results, CPFEM was carried out to study the distribution of type II residual stress. Using high-resolution characterization results, GPA was performed to study type III residual stress caused by crystal defects. The FEA results indicate that thermal strain and phase transformation strain dominate the macroscopic stress change before and after martensitic transformation. During the first tempering process, the phase transformation leads to the release of quenching residual stress. The large stress concentration at the carbide interface is revealed by CPFEM. High-resolution characterization of coherent interface between carbide and matrix reveals that the micro residual strain at this interface is small. Through a systematic analysis of the residual stress of 8Cr4Mo4V steel, a basis is provided for modifying the macroscopic and microscopic residual stress of heat treatment to improve the bearing performance. Full article

Increasing traffic loads, extreme climatic conditions, and environmental regulations highlight the need to re-evaluate the use of existing asphalt binders in pavement construction. This paper examines the limitations of conventional and modified asphalt binders by incorporating a comprehensive literature review that focuses on performance, environmental impact, and economic issues. Studies show that binder grade selection, mixing and compaction temperatures, and ageing affect pavement performance and may reduce pavement service life by 10% to 30%. Although modifiers such as polymers and nanomaterials can improve rutting and moisture damage resistance by up to 50%, they have limited effects on fatigue and thermal cracking resistance. Moreover, these modifiers can affect the asphalt mixture production process due to source variability, leading to complex mixing methods, increased cost, and higher emissions. Additionally, high-temperature asphalt mixture production increases air pollution by 250%, causing health risks. Furthermore, asphalt binder and mixture production account for over 50% of the total pavement costs, and the rising asphalt binder prices place a burden on highway budgets. This review highlights the critical research gaps including source variability, testing and mixing methods, and environmental impact of modifiers and provides a future roadmap for developing cost-effective and sustainable alternatives and their practical implementation. Full article

Exhaust manifolds accumulate creep and fatigue damage under cyclic thermal loading, leading to localized failure. Understanding a material’s mechanical behavior is crucial for accurate life assessment. This study systematically investigated the low-cycle fatigue (LCF) and creep–fatigue interaction behaviors of medium-silicon molybdenum ductile iron. It was found that QTRSi4Mo exhibited cyclic hardening at room temperature and 400 °C, whereas it exhibited cyclic softening at 600 °C and 700 °C for low-cycle stress–strain responses. During creep–fatigue tests with hold time, variations in the strain amplitude did not alter the hysteresis loop shape or the hardening/softening characteristics of the material. They only induced a slight upward shift in the yield center. Additionally, stress relaxation primarily occurred in the initial phase of the hold period, so the hold duration had little effect on the final stress value. The investigation of creep–fatigue life models highlighted that accurately characterizing the damage induced by stress relaxation during the hold stage is critical for creep damage evaluation. The calculated creep damage results differed greatly from the experimental results of the time fraction model (TF). A combined approach using the strain energy density dissipation model (T-SEDE) and the Ostergren method demonstrated excellent predictive capability for creep–fatigue life. Full article