Search Results (389)

The global energy transition and increasingly rigorous legal regulations aimed at climate protection are driving the search for alternative energy sources, including renewable energy sources (RESs) and waste heat. However, the mismatch between supply and demand presents a significant challenge. Thermal energy storage (TES) technologies, particularly mobile thermal energy storage (M-TES), offer a potential solution to address this gap. M-TES can not only balance supply and demand but also facilitate the transportation of heat from the source to the recipient. This paper reviews the current state of M-TES technologies, focusing on their technology readiness level, key operating parameters, and advantages and disadvantages. It is found that M-TES can be based on sensible heat, latent heat, or thermochemical reactions, with the majority of research and projects centered around latent heat storage. Regarding the type of research, significant progress has been made at the laboratory and simulation levels, while real-world implementation remains limited, with few pilot projects and commercially available systems. Despite the limited number of real-world M-TES implementations, currently existing M-TES systems can store up to 5.4 MWh in temperatures ranging from 58 °C to as high as 1300 °C. These findings highlight the potential of the M-TES and offer data for technology selection, simultaneously indicating the research gaps and future research directions. Full article

This study explores modernization strategies for existing district heating (DH) networks to enhance their efficiency and sustainability, focusing on achieving net-zero emissions in urban heating systems. Building upon a literature review and expert interviews, we developed a strategic decision-support framework that outlines distinct strategies for retrofitting district heating grids and includes a portfolio analysis. This framework serves as a tool to guide DH operators and stakeholders in selecting well-founded modernization pathways by considering technical, economic, and social dimensions. The review identifies several promising measures, such as reducing operational temperatures at substations, implementing optimized substations, integrating renewable and waste heat sources, implementing thermal energy storage (TES), deploying smart metering and monitoring infrastructure, and expanding networks while addressing public concerns. Additionally, the review highlights the importance of stakeholder engagement and policy support in successfully implementing these strategies. The developed strategic decision-support framework helps practitioners select a tailored modernization strategy aligned with the local context. Furthermore, the findings show the necessity of adopting a comprehensive approach that combines technical upgrades with robust stakeholder involvement and supportive policy measures to facilitate the transition to sustainable urban heating solutions. For example, the development of decision-support tools enables stakeholders to systematically evaluate and select grid modernization strategies, directly helping to reduce transmission losses and lower greenhouse gas (GHG) emissions contributing to climate goals and enhancing energy security. Indeed, as shown in the reviewed literature, retrofitting high-temperature district heating networks with low-temperature distribution and integrating renewables can lead to near-complete decarbonization of the supplied heat. Additionally, integrating advanced digital technologies, such as smart grid systems, can enhance grid efficiency and enable a greater share of variable renewable energy thus supporting national decarbonization targets. Further investigation could point to the most determining context factors for best choices to improve the sustainability and efficiency of existing DH systems. Full article

The MENA region, with its high solar potential and increasing investments in renewable energy, is transitioning away from fossil fuels toward more sustainable energy systems. To fully benefit from this transition and address issues such as intermittency and energy storage, “green” hydrogen is emerging as a key parameter. When produced using simple and cost-effective technologies like linear Fresnel reflector (LFR), it offers a practical solution. Therefore, assessing the potential of hydrogen production from LFR technology is essential to support the development of the energy sector and promote local industrial growth. This study investigates “green” hydrogen production using a 50 MW concentrated solar power (CSP) system based on LFR technology, where the CSP system generates electricity to power a proton exchange membrane electrolyzer for hydrogen production for three locations, including Ain Beni Mathar in Morocco, Assiout in Egypt, and Tabuk in Saudi Arabia. The results show that Tabuk achieved the highest annual hydrogen production (45.02 kg/kWe), followed by Assiout (38.72 kg/kWe) and Ain Beni Mathar (32.42 kg/kWe), with corresponding levelized costs of hydrogen (LCOH₂) of 6.47 USD/kg, 6.84 USD/kg, and 7.35 USD/kg, respectively. In addition, several sensitivity analyses were conducted addressing the impact of thermal energy storage (TES) on the hydrogen production and costs, the effect of reduced investment costs resulting from the local manufacturing of LFR components, and the futuristic assumption of the electrolyzer cost drop. The integration of TES enhanced hydrogen output and reduced LCOH₂ by up to 9%. Additionally, a future PEM electrolyzer costs projected for 2030 showed that LCOH₂ could decrease by up to 1.3 USD/kg depending on site conditions. These findings demonstrate that combining TES with cost optimization strategies can significantly improve both technical performance and economic feasibility in the MENA region. Full article

Computational fluid dynamics became an essential tool for analyzing complex fluid behavior, with applications ranging from aerospace engineering to renewable energy systems. Recent advancements in artificial intelligence further enhanced computational fluid dynamics capabilities, improving computational efficiency and predictive accuracy. However, despite its widespread adoption, the integration of artificial intelligence in computational fluid dynamics for thermal energy storage remained an underexplored research area. This study presented a bibliometric analysis of the existing literature on artificial intelligence applications in computational fluid dynamics, with a specific focus on thermal energy storage systems. By comparing two research domains—artificial intelligence in computational fluid dynamics and artificial intelligence in computational fluid dynamics applied to thermal energy storage—this paper identified a significant gap in the latter, as reflected in the low number of publications, limited collaboration networks, and weak citation relationships. While artificial intelligence-driven computational fluid dynamics research expanded across multiple disciplines, its application in thermal energy storage is still in its early stages, highlighting the need for further investigations. The results indicated a growing interest in artificial intelligence-enhanced computational fluid dynamics models for thermal energy storage optimization, particularly in areas such as heat transfer, phase change materials, and system efficiency improvements. The results also included an analysis of leading contributors to this field, along with emerging countries’ contributions. A study of the key publication sources with a high impact in this domain was also included. Full article

Buildings account for about a third of global energy and it is thus imperative to eliminate the use of fossil fuels to power and provide for their thermal needs. Solar photovoltaic (PV) technology can provide power and with electrification, heating/cooling, but there is often a load mismatch with the intermittent solar supply. Electric batteries can overcome this challenge at high solar penetration rates but are still capital-intensive. A promising solution is thermal energy storage (TES), which has a low cost per unit of energy. This review provides an in-depth analysis of TES but specifically focuses on phase change material (PCM)-based TES, and its significance in the building sector. The classification, characterization, properties, applications, challenges, and modeling of PCM-TES are detailed. Finally, the potential for integrating TES with PV and heat pump (HP) technologies to decarbonize the residential sector is detailed. Although many studies show proof of carbon reduction for the individual and coupled systems, the integration of PV+HP+PCM-TES systems as a whole unit has not been developed to achieve carbon neutrality and facilitate net zero emission goals. Overall, there is still a lack of available literature and experimental datasets for these complex systems which are needed to develop models for global implementation as well as studies to quantify their economic and environmental performance. Full article

Thermal Energy Storage (TES) technologies improve solar power dispatchability by addressing the important challenge of energy intermittency. Sensible heat energy storage technology using materials based on Ordinary Portland Cement (OPC) is the simplest and most economical. However, the operation of these materials is limited to temperatures below 400 °C due to the structural degradation of OPC at this temperature. This paper investigates the design and development of inorganic polymers based on Construction and Demolition Waste (CDW) as a sustainable, low-cost, and environmentally friendly alternative to OPC-based materials for high-temperature sensible TES applications. Based on the ternary systems Na₂O-SiO₂-Al₂O₃ and K₂O-SiO₂-Al₂O₃, representative compositions of CDW-based inorganic polymers were theoretically designed and evaluated using the thermochemical software FactSage 7.0. The experimental verification of the theoretically designed inorganic polymers confirmed that they can withstand temperatures higher than 500 and up to 700 °C. The optimized materials developed compressive strength around 20 MPa, which was improved with temperatures up to 500 °C and then decreased. Moreover, they presented thermal capacities from 600 to 1090 J kg⁻¹ °C ⁻¹, thermal diffusivity in the range of 4.7–5.6 × 10⁻⁷ m² s⁻¹, and thermal conductivity from 0.6 to 1 W m⁻¹ °C⁻¹. These properties render the developed inorganic polymers significant candidates for TES applications. Full article

Renewable energy sources (RESs) are increasingly being recognized as sustainable and accessible alternatives for the energy future. However, their intermittent nature poses significant challenges to system reliability and stability, necessitating the integration of energy storage systems (ESSs) to ensure sustainability and dependability. This study examines various ESS alternatives, evaluating their suitability for different applications using a multi-criteria decision-making (MCDM) approach. The methodology accommodates diverse criteria types, including qualitative and quantitative factors, represented as linguistic terms, interval values, and crisp numerical data. A techno-socio-economic framework for ESS selection is proposed and applied to Jordan’s unique energy landscape. This framework integrates technical performance, economic feasibility, and social considerations to identify suitable ESS solutions aligned with the country’s renewable energy goals. The study ranks twelve energy storage systems (ESSs) based on key performance criteria. Pumped hydro storage (PHS), thermal energy storage (TES), supercapacitors (SCs), and lithium-ion batteries (Li-ion BESS) lead the ranking. These systems showed the best performance in terms of scalability, efficiency, and integration with grid-scale applications in Jordan. Key applications analyzed include renewable energy integration, grid stability, load shifting, peak load regulation, frequency regulation, and seasonal energy storage. Results indicate that Li-ion batteries are most suitable for renewable energy integration, while flywheels excel in grid stability and frequency regulation. PHS was found to be the preferred solution for load shifting, peak load regulation, and seasonal storage, with hydrogen storage emerging as a promising option for long-duration needs. These findings provide critical insights to guide policy and infrastructure planning, offering a robust model for comprehensive ESS assessment in energy transition planning for countries facing similar challenges. Full article

The following study investigated the melting behavior of coconut oil as a phase-change material in shell-and-tube and shell-and-coil thermal energy storage systems. The primary objective was to deepen the understanding of PCM melting dynamics under varying boundary conditions, aiming to optimize TES designs for renewable energy applications. This research addresses a gap in understanding how different heat-transfer configurations and boundary conditions affect melting efficiency. Experimental setups included two distinct heat-transfer surfaces in a cylindrical shell—a copper tube and a copper coil—tested under constant wall temperatures (34 °C for the tube, 33 °C for the coil) and constant heat flux (597 W/m² for the coil). Findings reveal that melting under constant heat flux takes approximately twice as long as under constant wall temperatures, underscoring the critical role of heat-transfer conditions in TES performance. The liquid fraction was estimated using two approaches: image-based analysis and the volume-averaged temperature method. The former proved less reliable due to geometric limitations, particularly when the heat-transfer surface was distant from the shell wall. Conversely, the latter yielded higher accuracy, especially in the shell-and-tube setup. Due to the scarcity of correlations for constant heat-flux conditions, the novel contribution of this work is the development of a modified semi-empirical correlation for the shell-and-coil TES system. For this purpose, an existing model, which demonstrated strong alignment with experimental data, was adapted. The findings suggest that slower melting under constant heat flux could benefit applications needing sustained heat release, like solar energy systems. Future work could investigate additional PCMs or novel geometries to further improve TES efficiency and scalability. Full article

Spain’s energy transition poses the dual challenge of managing renewable curtailment and enhancing the competitiveness of concentrated solar power (CSP) technologies. This study evaluates the suitability of replacing molten salts with solid particles for energy storage and, additionally, explores the storage of surplus electricity from grid in Carnot batteries. Four scenarios were analyzed using a Gemasolar-type plant model: each storage medium was studied with and without the integration of curtailed electricity. The solar field was modeled with SAM (System Advisor Model), while curtailment data from Red Eléctrica de España (2016–2021) quantified the available surplus. Results show that solid particles lead to 7.4% higher annual electricity production compared to molten salts, mainly due to improved power cycle efficiency. The integration of curtailment increased output further, with the solid particle Carnot battery scenario achieving the highest performance (up to 19.0% sun-to-electricity efficiency and 69.7% capacity factor). However, round-trip efficiency for curtailment storage was limited (~25–27%), and although solid particles showed lower LCOE (levelized cost of energy) than salts (192 vs. 211 USD/MWh), the Carnot battery increased costs. These findings suggest that while solid particles offer clear advantages, the economic viability of Carnot batteries remains constrained by current cost and operational limitations. Full article

Thermal energy storage (TES) is likely to play a significant role in the decarbonisation of domestic heat, allowing consumers to shift their energy consumption away from peak demand periods and reducing overall strain on the grid. Phase change materials (PCMs) are a promising option for TES, in which energy can be stored in the latent heat of the melting of the PCM; these offer greater storage densities than sensible heat TES and have the benefit of releasing stored heat at a consistent temperature (the crystallisation temperature of the PCM). One of the key difficulties for PCM-based TES is state of charge (SoC) estimation (the estimation of the proportion of energy stored in the TES unit up to its maximum capacity), particularly during idle periods while the unit is storing heat. SoC estimation is key to the implementation of TES, as it enables the effective control of the units. The use of a resonator within the PCM for SoC estimation could potentially provide a global estimate of the SoC, since the resonator passes through the full depth of the PCM in the unit. The SoC could be inferred by measuring the vibrational response of the resonator under excitation, which varies depending on the melt state of the PCM. This paper presents findings from a test rig investigating this proposal, including discussions on the features required from the resonator response for SoC inference. Full article

The implementation of renewable energy systems (RESs) in the agricultural sector has significant potential to mitigate the negative effects of fossil fuel-based products on the global climate, reduce operational costs, and enhance crop production. However, the intermittent nature of RESs poses a major challenge to realizing these benefits. To address this, thermal energy storage (TES) and hybrid heat pump (HHP) systems are integrated with RESs to balance the mismatch between thermal energy production and demand. In pursuit of clean energy solutions in the agricultural sector, a 3942 m² greenhouse in Yeoju-si, South Korea, is equipped with 231 solar thermal (ST) collectors, 117 photovoltaic thermal (PVT) collectors, four HHPs, two ground-source heat pumps (GSHPs), a 28,500 m³ borehole TES (BTES) unit, a 1040 m³ tank TES (TTES) unit, and three short-term TES units with capacities of 150 m³, 30 m³, and 30 m³. This study evaluates the long-term performance of the integrated hybrid renewable energy and thermal energy storage systems (HRETESSs) in meeting the greenhouse’s heating and cooling demands. Results indicate that the annual system performance efficiencies range from 25.3% to 68.5% for ST collectors and 31.9% to 72.2% for PVT collectors. The coefficient of performance (COP) during the heating season is 3.3 for GSHPs, 2.5 for HHPs using BTES as a source, and 3.6 for HHPs using TTES as a source. During the cooling season, the COP ranges from 5.3 to 5.7 for GSHPs and 1.84 to 2.83 for ASHPs. Notably, the HRETESS supplied 3.4% of its total heating energy directly from solar energy, 89.3% indirectly via heat pump utilization, and 7.3% is provided by auxiliary heating. This study provides valuable insights into the integration of HRETESSs to maximize greenhouse energy efficiency and supports the development of sustainable agricultural energy solutions, contributing to reduced greenhouse gas emissions and operational costs. Full article

As the integration of renewable energy sources continues to increase, thermal power units are increasingly required to enhance their operational flexibility to accommodate grid fluctuations. However, frequent load variations in conventional thermal power plants result in decreased efficiency, accelerated equipment wear, and high operational costs. In this context, molten-salt thermal energy storage (TES) has emerged as a promising solution due to its high specific heat capacity and thermal stability. By enabling the storage of surplus energy and its regulated release during peak demand periods, molten salt TES contributes to improved grid stability, reduced start-up frequency, and minimized operational disturbances. This study employs comprehensive thermodynamic simulations to investigate three representative schemes for heat storage and release. The results indicate that the dual steam extraction configuration (Scheme 3) offers the highest thermal storage capacity and peak-load regulation potential, albeit at the cost of increased heat consumption. Conversely, the single steam extraction configurations (Scheme 1 and 2) demonstrate improved thermal efficiency and reduced system complexity. Furthermore, Scheme 3, which involves extracting feedwater from the condenser outlet, provides enhanced operational flexibility but necessitates a higher initial investment. These findings offer critical insights into the optimal integration of molten-salt thermal-storage systems with conventional thermal power units. The outcomes not only highlight the trade-offs among different design strategies but also support the broader objective of enhancing the efficiency and adaptability of thermal power generation in a renewable-dominated energy landscape. Full article

Achieving net-zero greenhouse gas emissions by 2050 requires CO₂-neutral industrial process heat, with seasonal energy storage (SES) playing a crucial role in balancing supply and demand. This study reviews thermal energy storage (TES) and Power-to-X (P2X) technologies for applications without thermal grids, assessing their feasibility, state of the art, opportunities, and challenges. Underground TES (UTES), such as aquifer and borehole storage, offer 1–26 times lower annual heat storage costs than above-ground tanks. For P2X, hydrogen storage in salt caverns is 80% less expensive than in high-pressure tanks. Methane and methanol storage costs depend on CO₂ sourcing, while Renewable Metal Energy Carriers (ReMECs), such as aluminum and iron, offer high energy density and up to 580 times lower storage volume, with aluminum potentially achieving the lowest Levelized Cost of X Storage (LCOXS) at a rate of 180 EUR/MWh of energy discharged. Underground TES and hydrogen caverns are cost-effective but face spatial/geological constraints. P2X alternatives have established infrastructure but have lower efficiency, whereas ReMECs show promise for large-scale storage. However, economic viability remains a challenge due to very few annual cycles, which require significant reductions of investment cost and annual cost of capital (CAPEX), as well as improvements in overall system efficiency to minimize losses. These findings highlight the trade-offs between cost, space requirements, and the feasibility of SES deployment in industry. Full article

Combining energy storage with base-load power sources offers an effective way to cover the fluctuation of renewable energy. This study proposes a nuclear–solar hybrid energy system (NSHES), which integrates a small modular thorium molten salt reactor (smTMSR), concentrating solar power (CSP), and thermal energy storage (TES). Two operation modes are designed and analyzed: constant nuclear power (mode 1) and adjusted nuclear power (mode 2). The nondominated sorting genetic algorithm II (NSGA-II) is applied to minimize both the deficiency of power supply probability (DPSP) and the levelized cost of energy (LCOE). The decision variables used are the solar multiple (SM) of CSP and the theoretical storage duration (TSD) of TES. The criteria importance through inter-criteria correlation (CRITIC) method and the technique for order preference by similarity to ideal solution (TOPSIS) are utilized to derive the optimal compromise solution. The electricity curtailment probability (ECP) is calculated, and the results show that mode 2 has a lower ECP compared with mode 1. Furthermore, the configuration with an installed capacity of nuclear and CSP (100:100) has the lowest LCOE and ECP when the DPSP is satisfied with certain conditions. Optimizing the NSHES offers an effective approach to mitigating the mismatch between energy supply and demand. Full article

This study successfully synthesizes SiO₂-encapsulated nano-phase change materials (NPCMs) via a sol–gel method, using paraffin as the thermal storage medium. The encapsulation process is validated through FTIR, XRD, and XPS analyses, confirming the formation of an amorphous SiO₂ shell without any chemical interaction between the core and shell. SEM imaging reveals a well-defined core–shell structure with uniform spherical geometry, with the smallest particle size (190 nm) observed in the sample with a 4:1 paraffin/SiO₂ ratio (PARSI-4). TGA results demonstrate enhanced thermal stability, with thicker SiO₂ shells effectively protecting against thermal degradation. The DSC analysis indicates that an increased core–shell ratio improves thermal performance, with PARSI-4 exhibiting the highest melting (160.86 J/g) and solidifying (153.93 J/g) enthalpies. The encapsulation ratio (ER) and encapsulation efficiency (EE) have been accomplished at 87.83% and 87.04%, respectively, in the PARSI-4 sample. Thermal cycling tests confirm the material’s long-term stability, with 98.16% enthalpy retention even after 100 cycles. Additionally, leakage resistance tests validate the structural integrity of the encapsulated paraffin, preventing spillage at elevated temperatures. These findings demonstrate the potential of SiO₂-encapsulated NPCMs for efficient thermal energy storage (TES), making them promising candidates for sustainable and energy-efficient applications. Full article