Search Results (16,598)

Addressing the thermal management challenges of prismatic aluminum shell lithium battery modules in electric vehicles under high-rate charge–discharge conditions, this study proposes a multi-objective optimization design method for integrated biomimetic liquid cooling plates. By integrating various highly efficient heat transfer structures from nature, including fractal-tree-like networks, leaf vein branching systems, and spider web radial distribution, a novel biomimetic liquid cooling plate topology was constructed. A multi-physics coupled numerical model considering electrochemical heat generation, thermal conduction, convective heat transfer, and thermal stress deformation was established. The NSGA-II algorithm was employed to globally optimize 12 design variables including channel geometric parameters, operating conditions, and structural dimensions, achieving collaborative optimization objectives of maximum temperature minimization, temperature uniformity maximization, pressure drop minimization, and structural lightweighting. The weight coefficients for the four optimization objectives were determined through the Analytic Hierarchy Process (AHP) with verified consistency (CR = 0.02 < 0.10), ensuring rational priority allocation aligned with automotive safety standards. The optimization results demonstrated that compared to the initial design, the optimal solution reduced the maximum temperature under 3C discharge conditions by 9.9% to 34.7 °C, decreased the temperature difference by 31.3% to 3.3 °C, lowered the pressure drop by 24.6% to 2150 Pa, reduced structural mass by 4.0%, and decreased maximum stress by 16.7%. Quantitative comparison with single biomimetic structures under identical boundary conditions showed that the integrated design achieved a 3.3% lower maximum temperature and 25.7% better flow uniformity than the best-performing single structure, demonstrating the synergistic advantages of multi-biomimetic integration. These synergistic performance improvements can be attributed to the hierarchical multi-scale architecture where fractal networks provide macro-scale flow distribution, leaf vein branches ensure meso-scale coverage, and spider web radials achieve micro-scale thermal matching. Long-term cycling tests conducted at 1C/1C rate with 25 ± 1 °C ambient temperature showed that the optimized design maintained a capacity retention rate of 92.3% after 1000 charge–discharge cycles, demonstrating excellent durability. The complex biomimetic channel structure can be fabricated using selective laser melting technology with minimum feature sizes below 0.3 mm, indicating promising manufacturing feasibility. The research findings provide theoretical guidance and technical support for the engineering design of high-performance battery thermal management systems. Full article

This study addresses the decarbonisation of the glass industry from an integrated energy system perspective, analysing the role of renewable electricity, furnace electrification, and hydrogen in meeting the high and continuous thermal demands of glass melting. While direct electrification represents the most energy-efficient option, its implementation is challenged by the intermittent nature and limited operating hours of renewable generation, scale constraints, and technological limitations in replacing fossil-based processes, highlighting a potential complementary role for hydrogen. A general methodological framework is first developed and then applied to a representative oxyfuel glass furnace using mixed-integer linear programming (MILP) optimisation that minimises melting costs while accounting for variable solar and wind generation, battery storage, and hydrogen production and storage. The results show that high levels of furnace electrification combined with wind-dominated renewable supply yield the lowest decarbonisation costs, which can become negative at moderate decarbonisation levels. Under the current solar–wind capacity expansion mix, the integration of battery and hydrogen storage extends achievable emission reductions from around 50% to 80%, with hydrogen acting as a complementary solution to electrification. Sensitivity analysis of energy and carbon prices, as well as technology investment costs, identifies the economic conditions in which storage-based solutions become cost-effective, highlighting the strategic role of hydrogen under conditions of low electricity prices and high fuel prices. The findings demonstrate viable pathways for deep decarbonisation of the glass sector and provide a transferable methodological framework for optimal renewable energy integration in other hard-to-abate industrial sectors facing similar constraints. Full article

In the face of the dual challenges of global climate change and rapid urbanization, optimizing the ecosystem services of urban green spaces has become a key strategy for building resilient and sustainable cities. This is particularly crucial in ecologically fragile arid and semi-arid regions. To accurately assess the thermal regulation function of urban green spaces, this study selected 20 parks in Xi’an, China. Combining remote sensing and Geographic Information System (GIS) technology, we adopted four established cooling indicators—Park Cooling Area (PCA), Park Cooling Efficiency (PCE), Park Cooling Intensity (PCI), and Park Cooling Gradient (PCG)—to systematically evaluate the thermal regulation functions of urban parks and their landscape-driving mechanisms. The results indicated that the average cooling amplitude of the parks was 2.53 °C, with an effective influence distance reaching 323.9 m, exhibiting a significant spatial gradient decay. We found a non-linear trade-off between green space scale and efficiency: while large parks provided a wider absolute cooling range, small and medium-sized parks demonstrated higher efficiency per unit area. Furthermore, a blue-green synergistic configuration significantly enhanced the mitigation of the urban heat island effect. The study confirmed that Park Area (PA), Park Perimeter (PP), and the Normalized Difference Vegetation Index (NDVI) significantly promoted cooling effects, whereas landscape fragmentation inhibited ecological benefits. This study elucidates the comprehensive regulation mechanism of urban parks on the urban microclimate, providing planning guidance for implementing Nature-based Solutions (NbS) and achieving climate-adaptive development in arid and semi-arid cities within the context of urban renewal. Full article

Bayberry (Morella rubra Lour.; syn. Myrica rubra (Lour.) Siebold & Zucc.) leaves are rich in bioactive compounds but remain underutilized. This study investigated the optimal harvest stage and processing methods to develop high-quality functional powder. We first compared three growth stages: red buds (RB), new leaves (NL), and old leaves (OL). RB exhibited the highest antioxidant capacity and unique volatile profile; however, NL was selected for processing optimization due to the balance between quality and biomass availability. Subsequently, NL was subjected to freeze-drying (FD), mechanical drying (MD), steaming followed by MD (S-MD), and shade drying (SD). Results showed that FD preserved the vibrant green color, glandular trichome structure, ascorbic acid, and fresh volatiles (monoterpenes). Conversely, thermal drying (MD and S-MD) disrupted cellular barriers, which facilitated the extraction of minerals and robust polyphenols like myricitrin, yielding the highest extraction of flavonoids and corresponding antioxidant activity, measured by hydrophilic oxygen radical absorbance capacity (H-ORAC), in hot water extracts than FD. SD significantly degraded quality due to prolonged enzymatic oxidation. While FD is ideal for preserving aesthetics and heat-sensitive nutrients, low-cost MD and S-MD are recommended for producing antioxidant-rich powders for functional food applications where extraction efficiency is prioritized. Full article

Engineering sizing of seasonal underground thermal energy storage (SUTES) systems remains constrained by the complex coupling of heat and moisture transport in unsaturated porous media. Neglecting these coupling effects can lead to significant errors in the design of borehole length and spacing. This study presents a three-dimensional numerical investigation of a coaxial borehole heat exchanger (CBHE) field over a full annual cycle, including storage, transition, extraction, and recovery stages. A coupled heat–moisture transfer model for the soil–CBHE system is developed and validated against experimental data, yielding mean relative errors of 6.8% for temperature and 7.7% for volumetric water content. The model is then used to quantify the sensitivity of SUTES performance to the initial volumetric water content (θ₀). Increasing θ₀ from 0.20 to 0.40 m³·m⁻³ enhances the average heat injection rate per unit depth by 6.6% (from 53.84 to 57.39 W·m⁻¹) and the heat extraction rate by 7.1% (from 23.73 to 25.41 W·m⁻¹). This enhancement is primarily attributed to increased effective thermal conductivity and heat capacity, together with moisture migration and the associated latent-heat effects within the soil matrix. While the variations in seasonal energy and exergy efficiencies are within 1 percentage point, radial soil-temperature uniformity and effective heat diffusion are significantly improved in moister soils. These findings clarify the coupled transport mechanisms in borehole seasonal storage and provide engineering guidance for sizing CBHE fields in unsaturated formations. Full article

To achieve high-precision and real-time quantitative evaluation of gas production in underground gas storage (UGS), this study focused on 11 typical injection-production wells in the Sudong UGS group. To address the common challenges posed by deviated well structures and complex wellbore temperature field distributions, a gas flow-rate calculation method based on Distributed Temperature-Sensing (DTS) data was developed. By standardizing the processing of multi-well temperature data, deviated wellbore trajectories were straightened to convert measured depth (MD) to true vertical depth (TVD). By incorporating a geothermal correction mechanism, temperature anomalies closely related to fluid flow were extracted, and a spatially unified temperature field model was constructed. On this basis, a “Dual-Point Temperature Difference Method” is proposed as a novel approach for single-well production evaluation. Based on thermodynamic phenomena such as the Joule–Thomson effect and expansion cooling, two critical sensing points, upstream and downstream of the production layer, were selected, with their temperature anomaly difference (∆T) serving as a sensitive indicator of flow rate variations. Combined with downhole pressure parameters and synchronized wellhead metering data, a nonlinear quantitative relationship model between ∆T and gas production rate Q was established, enabling accurate conversion of wellbore thermal response to macroscopic flow parameters. The results indicated that the gas production rates calculated by this method align well with traditional wellhead metering data, with errors maintained within engineering tolerances. Notably, the method demonstrates higher reliability and corrective capabilities in wells with drifting or faulty meters. This achievement breaks the reliance of traditional methods on specific layers or mechanical meters. It enables the effective application of multi-well, full-section, and non-contact temperature data in gas volume assessment. This research provides new technical support for dynamic monitoring, efficient operation, and remaining gas evaluation of UGS, offering significant prospects for engineering applications. Full article

To accurately control the hot workability of 7050 aluminum alloy and determine the optimal process window, systematic hot compression experiments were carried out on the Gleeble-3500 thermal simulation test machine under the multi-group process conditions of deformation temperature 300~450 °C, strain rate 0.001~1 s⁻¹, and maximum deformation of 60%. The high-temperature rheological curve data were collected, and the key hot deformation parameters, such as deformation activation energy Q, Zener–Hollomon (Z) parameter, and power dissipation efficiency η, were calculated based on the experimental results. The random forest prediction model between process parameters and thermal deformation parameters was innovatively constructed to realize the accurate quantification of the parameter relationship. On this basis, the multi-objective process optimization was further carried out by coupling the TOPSIS and EWMs. Finally, the optimal hot deformation process parameters of 7050 aluminum alloy were determined as 410~450 °C and 0.001~1 s⁻¹. The microstructure analysis showed that the main deformation mechanism of the material in the optimized region was dynamic recrystallization, which could effectively ensure the microstructure uniformity and mechanical property stability of the formed parts. Full article

Modern high-pressure turbine (HPT) nozzle guide vanes (NGVs) operate under non-uniform inlet conditions, including hot streaks and swirl, which can induce complex flow phenomena and uneven thermal loading. These effects, particularly at the hub-vane corner, can compromise NGV durability, yet the combined influence of swirl and film cooling remains underexplored. The objective of this study is to investigate the aerothermal behaviour of contoured first-stage NGVs under varying swirl intensities and directions to improve understanding of hub and corner thermal protection and failure mechanisms. Steady, compressible RANS simulations were conducted with the k-ω SST turbulence model. A vane with a contoured hub and multiple film cooling rows was designed and analysed under axial and swirling inflows, both clockwise and counter-clockwise, with swirl numbers of Sn = ±0.2 and ±0.4. Axial flow achieved the highest area-averaged film cooling effectiveness (FCE) of 0.617. Negative swirl (Sn = −0.4) improved suction-side corner FCE to 0.215 but reduced pressure-side cooling, whereas positive swirl (Sn = 0.4) improved pressure-side cooling but reduced suction-side FCE to 0.043. Corner temperatures under positive swirl reached 1780 K, consistent with promoting failure, while negative swirl reduced corner temperatures to 1516 K. Aerodynamic losses increased with swirl, with negative swirl generating 5.78% higher total pressure losses than the axial baseline. Swirl altered the corner vortex topology, affecting boundary layer interactions and local heat transfer. These results highlight a trade-off between thermal protection and aerodynamic efficiency, emphasising that optimising NGV performance requires careful design of hub cooling and consideration of swirl direction and intensity. Full article

To reduce vehicular emission pollution in cold regions and maximize sustainable development of transportation, AC self-heating of electric vehicles is acknowledged as an efficient approach to mitigate the decline in Li-ion battery performance under low-temperature conditions. This paper introduces a novel battery self-heating approach based on reconfiguration of the drive circuit, which is compatible with both preheating and on-route heating. The undesired torque generated by the heating current can be inherently nullified regardless of the rotor position. The control of heating and driving currents is entirely decoupled, facilitating straightforward adaptation to a range of heating strategies. Furthermore, a battery electro-thermal model is proposed and integrated with the drive system model to estimate the battery temperature evolution. Comprehensive experiments are designed to validate the operating principle and the accuracy of battery temperature estimation under various working conditions. The results present a high fidelity between the experimental data and the simulation outcomes. The root mean square errors of the predicted battery temperature under all the constant and combined driving conditions are less than 1 °C. Full article

To overcome the limitations imposed by the intermittent nature of sunlight in photocatalytic applications, this research constructs a round-the-clock purification system. We integrated an optimized S-scheme CoFe₂O₄/BiVO₄ (CFO/BV) heterojunction (synthesized via ultrasonic self-assembly at a 0.5:0.5 ratio) with a thermal energy storage (TES) unit consisting of SiO₂-encapsulated Na₂SO₄·10H₂O phase change materials (PCMs). Comprehensive characterization techniques, including XRD, HRTEM, UV-Vis DRS, EPR, and DSC, confirmed the successful formation of the interface, a broadened visible-light response (λ > 650 nm), efficient radical production, and a high latent heat storage capacity (>200 J/g). Under simulated solar irradiation, the composite exhibited superior performance, degrading 98% of the Rhodamine B within 6 h (k = 0.00994 min⁻¹), significantly surpassing single-component counterparts. More importantly, during the subsequent 12 h dark period, the heat released from the PCM maintained the reaction temperature above 35 °C, driving a 64% degradation efficiency via a thermocatalytic pathway. The system demonstrated robust stability (>90% efficiency after five cycles), excellent magnetic recoverability (98%), and high tolerance to saline textile wastewater (<10% activity loss). Furthermore, Life Cycle Assessment (LCA) indicated a 40% reduction in energy consumption compared to conventional UV/TiO₂ processes, highlighting a sustainable strategy for continuous wastewater remediation through synergistic photocatalysis and thermocatalysis. Full article

Modern underground hard coal mines encounter increasing natural hazards as mining depth increases, including, in particular, significant rises in both methane and thermal hazards. Thermal threats are common in Polish mines, especially in areas where the primary rock temperature exceeds 40 °C. To provide an energy source for cooling systems and reduce methane emissions from ventilation air, a system based on a catalytic reactor combined with an absorption chiller was developed. Field tests conducted at the experimental mine Barbara in Mikołów (Poland) indicate that a COP based on methane chemical energy can reach a level of 0.3–0.4. An application analysis was conducted based on the results of cross-sectional forecasts of climatic conditions (thermal conditions forecasts). The results indicate the potential for using this installation as a supporting component of mine cooling systems. An important factor that may limit the efficiency of the installation is the volume flow of the exhaust air stream. It is estimated that, in countries where, as in Poland, air temperature is the primary criterion for assessing thermal safety, the results of the analysis would be similar. Full article

Conventional thermoelectric generators (TEGs) suffer from thermal resistance introduced by ceramic substrates and thermal interface materials, which limits the achievable temperature gradient across the junctions and reduces conversion efficiency. To overcome this limitation, a pin-fin integrated thermoelectric device (iTED) is proposed, in which the hot-side heat exchanger is incorporated directly into the hot-side interconnector, eliminating the ceramic and associated greases. An explicitly coupled thermal-fluid-electric finite-volume model is developed in ANSYS Fluent’s user-defined scalar (UDS) environment to quantify the simultaneous thermal-fluid-electric behavior of the iTED for inlet temperatures of 350 $\le T_{\mathrm{in}}\mathrm{K}\le$ 650, Reynolds numbers of 3000 $\le \mathrm{Re}\le$ 15,000, and load resistances ranging from 0.01 to ${10}^6$% of the internal device resistance ($R_{\mathrm{int}}$), for a fixed cold-side temperature of 300 K. The model is validated against established tube-bank correlations (2.2% agreement in pumping power) and a one-dimensional Explicit Thomson Model (1.2–6.9% agreement across all electrical system response quantities). Compared with an equivalently sized conventional TEG, the iTED achieves a 4.6-fold higher maximum power output (23.9 [W] vs. 5.2 [W] at Re = 15,000), a 2.8-fold higher thermal conversion efficiency (8.1% vs. 2.9%), and a 4.8-fold higher performance index (7.8 [-] vs. 1.6 [-] at Re = 3000), all at $T_{\mathrm{in}}$ = 650 K. A performance index analysis reveals that lower Reynolds numbers and higher inlet temperatures maximize the net power benefit, delineating the operational envelope in which the iTED produces more electrical power than is needed for fluid pumping. These findings demonstrate that device-level restructuring—specifically, the elimination of interfacial thermal resistance via integrated pin-fin heat exchangers—can yield performance improvements comparable to or exceeding those achievable through material advances alone. Full article

High-precision detection of hazardous gases with low refractive indices ranging from 1.000 to 1.100, specifically including methane, carbon monoxide, and sulfur dioxide, is critical for industrial safety, yet conventional sensors often suffer from limited sensitivity and severe thermal cross-sensitivity. This work presents a Magneto-Optical Differential Photonic Crystals Sensor (MO-DPCS) utilizing indium antimonide (InSb) to address these constraints. Employing the Multi-Objective Dragonfly Algorithm (MODA), the system was inversely optimized to maximize magneto-optical polarization splitting while rigorously maintaining an ultra-high transmission efficiency. Crucially, an angular interrogation architecture operating under oblique incidence was established to maximize the magneto-optical non-reciprocity, where the detection was realized by fixing the terahertz source frequency and monitoring the precise angular displacements of the steep spectral edges. A differential detection technique was employed to utilize the non-reciprocal phase changes wherein Transverse Electric (TE) and Transverse Magnetic (TM) modes display contrasting kinematic characteristics in the presence of an external magnetic field. The findings indicate that with an adjusted magnetic field of 0.033 T, the MO-DPCS attains an exceptional differential sensitivity of 30.8°/RIU, much above the 0.8°/RIU seen in the unmagnetized condition. The differential approach efficiently eliminates common-mode thermal noise, minimizing temperature-induced drift to below 0.35° across a 1 K range. The suggested MO-DPCS offers a robust, self-referencing solution for stable and high-sensitivity gas sensing applications with a detection limit of 4.18 × 10⁻⁴ RIU. Full article

Oil leakage in oil-immersed power transformers poses a significant threat to grid reliability, potentially causing severe electrical accidents and environmental pollution if not detected in time. Detecting oil leakage outdoors, however, remains challenging due to the impact of weather conditions such as fog, humidity, and rain, which obscure the leakage signs and complicate real-time detection. To address these challenges, we propose a solution that integrates infrared thermal imaging with a CNN-SVM hybrid architecture. The core of this approach lies in shifting from traditional Softmax-cross-entropy-based empirical risk minimization (ERM) to maximum-margin-based structural risk minimization (SRM). A fully fine-tuned MobileNetV3 transforms low-contrast, boundary-softened infrared thermal images—often affected by fog and moisture—into a more discriminative high-dimensional feature space, where positive and negative samples become linearly separable. This is followed by replacing Softmax with a linear SVM and using hinge loss to enforce a margin constraint, which maximizes the classification margin and improves robustness to input perturbations. Experimental results show that our proposed method outperforms all compared models, achieving an accuracy of 0.990, significantly higher than ResNet50_BCE (0.908), EfficientNetB0 (0.925), YOLOv11n-CLS (0.930), and ViT (0.929). In terms of F1-Score (0.989) and AUC (0.995), MobileNetV3-SVM also demonstrates excellent performance, ensuring outstanding classification capability. Additionally, the model achieves an inference latency of only 6.3 ms, demonstrating excellent real-time inference performance, highlighting its potential for transformer oil monitoring applications. This research contributes to SDG 6 by preventing industrial water pollution resulting from transformer oil runoff, thereby protecting vital water sources in remote environments. Full article

This study aims to develop high-performance hybrid nanocomposites for solid-state energy conversion. We achieved this by improving charge transport and thermoelectric efficiency through the interaction of polymers, nanoparticles, and ionic liquids. Nickel oxide nanoparticles (NiO NPs) were synthesized via a sonochemical route using a novel ionic liquid, 1,2-(propan). In our recent work, this approach enabled the formation of a hybrid [NiO NPs + IL] system, which was subsequently incorporated at different loadings (8, 15, and 30 wt.%) and coated with polyethylene glycol (PEG). The resulting nanocomposites were investigated to elucidate charge-transport mechanisms and assess the influence of the polymer coating on their optical, electrical, and thermal transport properties. Optical measurements showed a shift in the band gap due to π–π* electronic transitions. This effect indicates strong interface interactions. The PEG-coated [NiO NPs + IL] nanocomposites exhibited significantly enhanced charge-carrier mobility, resulting in improved electrical conductivity. Remarkably, a high Seebeck coefficient of 720 μV/K and an electrical conductivity of 0.35 S/cm were achieved, resulting in a maximum power factor of 24.74 μW/m·K², surpassing many recently reported polymer-based nanocomposites. PEG-coated [NiO NPs + IL] systems offer tunable optical properties and superior thermoelectric performance. Consequently, they are a promising alternative to conventional nanocomposites for sustainable energy conversion. Full article