Search Results (214)

In Gram-negative bacteria, lipopolysaccharides (LPSs, also known as endotoxin) can induce extensive immune responses that will enable victims to produce severe septic shock syndrome. Because of the high mortality of sepsis in the face of standard treatment, advance detoxification schemes are urgently needed in clinics. Herein, we described a supramolecular detoxification approach via direct host–guest complexation by a giant macrocycle. Cationic pentaphen[3]arene (CPP3) bearing multiple quaternary ammonium groups was screened as a candidate antidote. CPP3 exhibited robust binding affinity toward LPS with an association constant of (4.79 ± 0.29) × 10⁸ M⁻¹. Co-dosing with an equivalent amount of CPP3 has been demonstrated to decrease LPS-induced cytotoxicity on a cellular level through inhibiting ROS generation and proinflammatory cytokine expression. In vivo experiments have further proved that post-treatment by CPP3 could significantly improve the survival rate of LPS-poisoned mice from 0 to 100% over a period of 3 days, and inflammatory abnormalities and tissue damage were also alleviated. Full article

The one-dimensional (1D) Sb(III)-based organic–inorganic hybrid perovskite (AImd)₂¹_∞[SbI₅] (AImd = 1-allylimidazolium) crystallizes in the orthorhombic, centrosymmetric space group Pnma. The structure consists of corner-sharing [SbI₆] octahedra forming 1D chains separated by allylimidazolium cations. Void analysis through Mercury CSD software confirmed a densely packed lattice with a calculated void volume of 1.1%. Integrated quantum theory of atoms in molecules (QTAIM) and non-covalent interactions index (NCI) analyses showed that C–H···I interactions between the cations and the ¹_∞[SbI₅]²⁻ network predominantly stabilize the supramolecular assembly followed by N–H···I hydrogen bonds. The calculated growth morphology (GM) model fits very well to the experimental morphology. UV–Vis diffuse reflectance spectroscopy allowed us to determine the optical band gap to 3.15 eV. Density functional theory (DFT) calculations employing the B3LYP, CAM-B3LYP, and PBE0 functionals were benchmarked against experimental data. CAM-B3LYP best reproduced Sb–I bond lengths, while PBE0 more accurately captured the HOMO–LUMO gap and the associated electronic descriptors. These results support the assignment of an inorganic-to-organic [Sb–I] → π* charge-transfer excitation, and clarify how structural dimensionality and cation identity shape the material’s optoelectronic properties. Full article

The development and application of antimicrobial coatings has become increasingly important in both medical and industrial settings due to the rising threat of microbial contamination and antibiotic resistance. This paper focuses on the formulation, characterization, and investigation of coatings based on quaternized polysulfone, which are designed to encapsulate two broad-spectrum antimicrobial drugs with complementary activity, amphotericin B (AmB) and norfloxacin (NFX), with the primary aim of inhibiting pathogen colonization on surgical instruments. Structural characterization using FTIR, ¹H-NMR, and UV-Vis spectroscopy, along with supramolecular analysis via X-ray diffraction and polarized optical microscopy (POM), revealed strong physical interactions between the drugs and the quaternized polysulfone matrix. Scanning electron microscopy (SEM) confirmed a uniform distribution of the antimicrobial agents within the polymeric matrix. Surface wettability, assessed through water contact angle measurements, indicated moderate hydrophilicity (70–90°). The coatings also exhibited notable antioxidant activity, showing a 12-fold increase in DPPH radical inhibition compared to the control. Furthermore, all formulations demonstrated strong antimicrobial efficacy against three reference strains frequently associated with hospital-acquired infections, S. aureus, E. coli, and C. albicans, with inhibition zones ranging from 32 to 39.67 mm for bacterial strains and 13.86 to 20.86 mm for C. albicans. These data points indicate that these materials may be useful as antimicrobial coatings. Full article

Arginine plays a critical role in biomolecular interactions due to its guanidinium side chain, which enables multivalent electrostatic and hydrogen bonding contacts. In this study, atomistic molecular dynamics simulations were conducted across a broad concentration range (26–605 mM) to investigate the thermodynamic and structural features of arginine self-assembly in aqueous solution. Key observables—including hydrogen bond count, radius of gyration, contact number, and isobaric heat capacity—were analyzed to characterize emergent behavior. A three-regime aggregation pattern (dilute, cooperative, and saturated) was identified and quantitatively modeled using the Hill equation, revealing a non-linear transition in clustering behavior. Spatial analyses were supplemented with trajectory-based clustering and radial distribution functions. The heat capacity peak observed near 360 mM was interpreted as a thermodynamic signature of hydration rearrangement. Trajectory analyses utilized both GROMACS tools and the MDAnalysis library. While force field limitations and single-replica sampling are acknowledged, the results offer mechanistic insight into how arginine concentration modulates molecular organization—informing the understanding of biomolecular condensates, protein–nucleic acid complexes, and the design of functional supramolecular systems. The findings are in strong agreement with experimental observations from small-angle X-ray scattering and differential scanning calorimetry. Overall, this work establishes a cohesive framework for understanding amino acid condensation and reveals arginine’s concentration-dependent behavior as a model for weak, reversible molecular association. Full article

Receptors capable of binding both positive and negative ions are an important domain of supramolecular chemistry with valuable application potential. A Complete thermodynamic description of the equilibria related to ion pair recognition is beneficial in developing the optimized receptor systems, although it represents a difficult task that is rarely resolved due to various coupled processes. Here, we present a comprehensive study of ion pair (NaCl, NaHSO₄, and NaH₂PO₄) binding by a ureido–amide calix[4]arene host in acetonitrile using a series of experimental techniques and molecular dynamics simulations. We devoted particular attention to characterizing the side processes (ion association and salt precipitation) and included them in the models describing ion pair complex formation. For this purpose, a multimethod approach (potentiometry, conductometry, ITC, flame AES) was employed, generating reliable data which provided insight into the thermodynamic effect of each included equilibrium. Positive cooperativity was observed in the context of NaCl and NaHSO₄ binding by the studied calixarene. Computational results related to the NaCl complex in acetonitrile revealed that favorable Coulombic interactions, changes in affinity for solvent molecule inclusion, and intramolecular hydrogen bonding contributed to cation-induced cooperativity. Full article

Aiming at the problem that conventional friction reducers used in fracturing cannot simultaneously possess properties such as temperature resistance, salt resistance, shear resistance, rapid dissolution, and low damage. Under the design concept of “medium-low molecular weight, salt-resistant functional monomer, supramolecular physical crosslinking aggregation, and enhanced chain mechanical strength”, acrylamide, sulfonic acid salt-resistant monomer 2-acrylamide-2-methylpropanesulfonic acid, hydrophobic association monomer, and rigid skeleton functional monomer acryloyl morpholine were introduced into the friction reducer molecular chain by free radical polymerization, and combined with the compound suspension technology to develop a new type of multi-functional viscous friction reducer suspension (SAMD), the comprehensive performance of SAMD was investigated. The results indicated that the critical micelle concentration of SAMD was 0.33 wt%, SAMD could be dissolved in 80,000 mg/L brine within 3.0 min, and the viscosity loss of 0.5 wt% SAMD solution was 24.1% after 10 min of dissolution in 80,000 mg/L brine compared with that in deionized water, the drag reduction rate of 0.1 wt% SAMD solution could exceed 70% at 120 °C and still maintained good drag reduction performance in brine with a salinity of 100,000 mg/L. After three cycles of 170 s⁻¹ and 1022 s⁻¹ variable shear, the SAMD solution restored viscosity quickly and exhibited good shear resistance. The Tan δ (a parameter characterizing the viscoelasticity of the system) of 1.0 wt% SAMD solution was 0.52, which showed a good sand-carrying capacity, and the proppant settling velocity in it could be as low as 0.147 mm/s at 120 °C, achieving the function of high drag reduction at low concentrations and strong sand transportation at high concentrations. The viscosity of 1.4 wt% SAMD was 95.5 mPa s after shearing for 120 min at 140 °C and at 170 s⁻¹. After breaking a gel, the SAMD solution system had a core permeability harm rate of less than 15%, while the SAMD solution also possessed the performance of enhancing oil recovery. Compared with common friction reducers, SAMD simultaneously possessed the properties of temperature resistance, salt resistance, shear resistance, rapid dissolution, low damage, and enhanced oil recovery. Therefore, the use of this multi-effect friction reducer is suitable for the development of unconventional oil reservoirs with a temperature lower than 140 °C and a salinity of less than 100,000 mg/L. Full article

In this work, using small-angle X-ray scattering from synchrotron radiation, the macromolecular structure of chitosan and gelatin polyelectrolytes and their mixtures at various pH values and ratios was studied to determine the size and shape of primary supramolecular (bio)PEC. Analysis of the scattering profiles of the initial solutions of chitosan and gelatin with the building of the pair distance function showed the formation of single-modal distributions with a maximum molecular size of 46 and 32.2 nm, respectively. Ab initio reconstruction of the macromolecule’s shape showed the formation of objects shaped like an oblate spheroid. In mixtures of chitosan and gelatin at a pH below the isoelectric point, it was found that the scattering structures correspond to the initial biopolymers. However, it is observed that values of the aspect ratio at a ratio above 1:10 gradually increase, which indicates a slight elongation of the average particle and indirectly indicates the formation of dissipative structures of (bio)PEC. In mixtures at a pH above the isoelectric point, it was shown that at ratios above 1:5, the formation of primary supramolecular complexes is observed, which is accompanied by an increase in zero-scattering intensity by about three times, maximum molecular size by two to two-and-a-half times relative to the initial polymers, and the formation of elongated structures corresponding to the cylinder (swollen spiral). It may be a consequence of the increased efficiency of the polyelectrolyte associative interaction between chitosan and gelatin. Full article

The CRISPR (clustered regularly interspaced short palindromic repeats) system has emerged as a revolutionary gene-editing tool with immense potential in gene therapy, functional genomics, and beyond. However, achieving precise spatiotemporal control of gene editing in specific cells and tissues while effectively mitigating potential risks, such as off-target effects, remains a key challenge for its clinical translation. To overcome these limitations, researchers have developed innovative strategies based on chemical modifications of oligonucleotides to enhance the precision, efficiency, and controllability of CRISPR/Cas9-mediated gene editing. By introducing conditional responsive elements, such as photosensitive groups, small-molecule responsive units, and supramolecular structures, they have successfully achieved precise spatiotemporal and dose-dependent regulation of CRISPR/Cas9 function. This review provides a comprehensive overview of recent advancements in gRNA regulation strategies based on chemical modifications of oligonucleotides, discussing their applications in improving the efficiency, specificity, and controllability of CRISPR/Cas9 editing. We also highlight the challenges associated with the conditional control of gRNA and offer insights into future directions for the chemical regulation of gRNA to further advance CRISPR/Cas9 technology. Full article

Novel amphiphilic block copolymers of N-vinyl pyrrolidone (NVP) and either n-hexyl methacrylate (HMA, PNVP-b-PHMA) or stearyl methacrylate (SMA, PNVP-b-PSMA) were prepared by RAFT polymerization techniques and the sequential addition of monomers starting from the polymerization of NVP and using two different Chain Transfer Agents, CTAs. PNVP-b-PHMA are amorphous block copolymers containing constituent blocks with both high and low Tg values, whereas PNVP-b-PSMA are amorphous–semi-crystalline copolymers. Samples with different molecular weights and compositions were obtained. The copolymers were microphase-separated, but partial mixing was also observed. The presence of the amorphous PNVP block reduced the crystallinity of the PSMA blocks in the PNVP-b-PSMA copolymers. The thermal stability of the blocks was influenced by both constituents. The self-assembly behavior in THF, which is a selective solvent for polymethacrylate blocks, and in aqueous solutions, where PNVP was soluble, was examined. Unimolecular or low-aggregation-number micelles were obtained in THF for both types of samples. On the contrary, high-aggregation-number, spherical, and compact micelles were revealed in aqueous solutions. The increase in the steric hindrance of the side ester group of the polymethacrylate chain led to slightly lower degrees of association. The hydrophobic compound curcumin was efficiently encapsulated within the micellar core of the supramolecular structures in aqueous solutions. Micelles with higher aggregation numbers were more efficient in the encapsulation of curcumin. The results of this study were compared with those obtained from other block copolymers based on PNVP. Full article

Introduction. Many pharmacological properties of dipyridamole (DIP) are associated with its ability to inhibit phosphodiesterases (PDEs). Actually, DIP has interesting properties like antiviral for influenza, SARS-2 COVID-19, and herpesviruses. Our research aimed to design and synthesize the dynamic combinatorial DIP derivatives with more pronounced inhibiting properties in relation to PDE and to carry out the HPLC analysis of the resulting combinatorial derivatives of DIP. This study is aimed at investigating the effect of the dynamic derivative of dipyridamole (DDD) on intestinal dysbiosis syndrome in mice caused by streptomycin against the background of cyclophosphamide-induced cellular immunodeficiency. Materials and methods. For the synthesis of a dynamic combinatorial derivative of dipyridamole, we used a molecular dynamic method for drug design and combinatorial acylation of dipyridamole by succinic and acetic anhydride in different molar ranges of acylation agents. Combinatorial derivatives were analyzed using gradient HPLC with a UV detector. Also, derivatives established the inhibition ability for phosphodiesterase by the spectrophotometric method. Also, we used an in vivo mouse model with immunodeficiency caused by cyclophosphamide for pharmacological study. Results and discussion. Molecular modeling suggests that 18 different dipyridamole derivatives can self-assemble into a stable supramolecular structure with lower total energy. Specific combinatorial molar ratios of the synthesis components were necessary to create a new supramolecular compound with enhanced pharmacological properties. The inhibition of phosphodiesterase in such a dynamic combinatorial derivative already appeared at a concentration of 0.05 μM. In mice with colitis caused by streptomycin treatment, the administration of DDD per os resulted in an antidiarrheal effect and prevention of the animals’ weight loss. Given the cyclophosphamide-induced immunosuppression and streptomycin-associated diarrhea, immunity was completely restored only under the action of DDD. Conclusions. The most effective dipyridamole derivative for phosphodiesterase inhibition was formed only if the number of different derivatives in solution was maximum and consisted of all 18 molecules. With other quantities of modifiers, there was no qualitative change in the inhibitory activity of the combinatorial mixture against phosphodiesterase. According to all parameters, DDD has been proven to be more effective than the pure dipyridamole reference product. Full article

Supramolecular chemistry relies on the dynamic association/dissociation of molecules through non-covalent interactions. These interactions of a self-assembled system can be strategically exploited for sensing several microorganisms. Moreover, supramolecular systems can also be combined with other functional components like nanoparticles, self-assembled monolayers, and microarray systems to produce multicomponent sensors with higher sensitivity and lower detection time. In this review, we will discuss how cutting-edge supramolecular chemistry has enabled scientists to develop microbial biosensors with high reliability and rapid detection time. Moreover, they produce high-throughput operations, real-time monitoring, extensive operation platforms, and cost-effective production. This review can serve as a conceptual background for understanding state-of-the-art rapid detection methods of microbial biosensing. Full article

Osteoporosis, a chronic bone disorder, poses a global threat to the health of millions of individuals. The disruption of bone homeostasis is the fundamental cause of osteoporosis. Currently, clinical drugs are employed to promote bone formation via enhancing osteogenesis and/or reduce bone loss via inhibiting osteoclastogenesis. However, it is difficult for the current drugs to simultaneously address the osteoblastogenesis and osteoclastogenesis issues associated with osteoporosis. Hence, L/D-phenylalanine derivatives (L/DPF), combined with Mg²⁺ ions, are employed to assemble into chiral supramolecular hydrogels which facilitate osteocyte activity and inhibit osteoclast function. LPF_Mg hydrogels and DPF_Mg hydrogels demonstrate the opposite supramolecular chirality. Specifically, LPF_Mg hydrogels and DPF_Mg hydrogels are composed of left-handed (M-type) helical nanofibers and right-handed (P-type) helical nanofibers, respectively. The hydrogen bonding and π–π stacking interactions are crucial in the process of hydrogel formation. The chiral left-handed nanofibrous DPF_Mg hydrogels significantly promote osteogenic differentiation of MC3T3 cells and inhibit osteoclast differentiation of RAW267.4 cells, thereby demonstrating substantial potential for applications in improving skeletal health. These findings provide a promising novel perspective on the application of chiral functional materials for osteoporosis therapy. Full article

It is known that the presence of redox-inactive metals in the active center of an enzyme has a significant effect on its activity. In this regard and for other reasons, the effect of redox-inactive metals on redox processes, such as electron transfer, oxygen and hydrogen atom transfer, as well as the breaking and formation of O–O bonds in reactions catalyzed by transition metals, has been widely studied. Many questions about the role of redox-inactive metals in the mechanisms of these reactions remain open. In this paper, the mechanism of catalysis by bi- and triple hetero-binuclear heteroligand complexes including Ni and redox-inactive alkali metals ((A) {Ni(acac)₂∙L²} and (B) {Ni(acac)₂∙L²∙PhOH} (L² = MSt (M = Li, Na, or K)) in the process of the selective oxidation of ethylbenzene by molecular oxygen into α-phenyl ethyl hydroperoxide is considered. The activity of A and B complexes towards O₂, ROOH, and RO₂^• radicals was studied. Based on kinetic data, we suggest that the high catalytic efficiency of B triple complexes in oxidation processes may be associated with the role of outer-sphere regulatory interactions, with the formation of stable supramolecular structures due to intermolecular H bonds. This assumption was confirmed using the AFM method. Prospects for studying catalysis by complexes ({Ni(acac)₂∙L²} and {Ni(acac)₂∙L²∙PhOH}) that are models of NiARD (Ni-Acyreductone dioxygenase) are discussed. Full article

The interaction of sodium phytate hydrate C₆H₁₈O₂₄P₆·xNa·yH₂O (phytNa) with Cu(OAc)₂·H₂O and 1,10-phenanthroline (phen) led to the anionic tetranuclear complex [Cu₄(H₂O)₄(phen)₄(phyt)]·2Na⁺·2NH₄⁺·32H₂O (1), the structure of the latter was determined by X-ray diffraction analysis. The phytate 1 is completely deprotonated; six phosphate⁻ fragments (with atoms P1–P6) are characterized by different spatial arrangements relative to the cyclohexane ring (1a5e conformation), which determines two different types of coordination to the complexing agents—P1 and P3, P4, and P6 have monodentate, while P2 and P5 are bidentately bound to Cu²⁺ cations. The molecular structure of the anion complex is stabilized by a set of strong intramolecular hydrogen bonds involving coordinated water molecules. Aromatic systems of phen ligands chelating copper ions participate in strong intramolecular and intermolecular π-π interactions, further contributing to their association. At the supramolecular level, endless stacks are formed, in the voids of which sodium and ammonium cations and water molecules are present. The stability of 1 in the presence of human serum albumin (HSA) was investigated using Electron Paramagnetic Resonance (EPR) spectroscopy. Continuous wave (CW) EPR spectra in water/glycerol frozen solution clearly indicate a presence of an exchange-coupled Cu(II)-Cu(II) dimeric unit, as well as a Cu(II) monomer-like signal arising from spins sufficiently distant from each other, with comparable contributions of two types of signals. In the presence of albumin at a 1:1 ratio (1 to albumin), the EPR spectrum changes significantly, primarily due to the reduced contribution of the S = 1 fraction showing dipole–dipole splitting. The biological activity of 1 in vitro against the non-pathogenic (model for Mycobacterium tuberculosis) strain of Mycolicibacterium smegmatis is comparable to the first-line drug for tuberculosis treatment, rifampicin. Full article

Self-healing triboelectric nanogenerators (TENGs), which incorporate self-healing materials capable of recovering their structural and functional properties after damage, are transforming the field of artificial skin by effectively addressing challenges associated with mechanical damage and functional degradation. This review explores the latest advancements in self-healing TENGs, emphasizing material innovations, structural designs, and practical applications. Key materials include dynamic covalent polymers, supramolecular elastomers, and ion-conductive hydrogels, which provide rapid damage recovery, superior mechanical strength, and stable electrical performance. Innovative structural configurations, such as layered and encapsulated designs, optimize triboelectric efficiency and enhance environmental adaptability. Applications span healthcare, human–machine interfaces, and wearable electronics, demonstrating the immense potential for tactile sensing and energy harvesting. Despite significant progress, challenges remain in scalability, long-term durability, and multifunctional integration. Future research should focus on advanced material development, scalable fabrication, and intelligent system integration to unlock the full potential of self-healing TENGs. This review provides a comprehensive overview of current achievements and future directions, underscoring the pivotal role of self-healing TENGs in artificial skin technology. Full article