Search Results (35)

Microbial contamination is a global concern with impacts on a variety of industries ranging from marine to biomedical applications. Recent research on hydrophilic polymer-based coatings is focused on combining antifouling polymers with nanomaterials to enhance mechanical, optical, and stimuli-responsive properties, yielding colour changing, self-healing, and super hydrophilic materials. This study combines the hydrophilic and antifouling properties of vitamin B5 analogous methacrylamide (B5AMA)-based polymers with stimuli-responsive anthocyanin-dye-loaded cellulose nanocrystals (CNCs) to develop antifouling materials with colour changing capabilities upon bacterial contamination. Poly(B5AMA)-grafted CNCs were prepared through surface-initiated photoiniferter reversible addition fragmentation chain transfer (SP-RAFT) polymerization and characterized through proton nuclear magnetic resonance (¹H-NMR), transmission electron microscopy (SEM/TEM), and X-ray photon spectroscopy (XPS) to confirm the formation of surface-grafted polymer chains. The bare CNCs and poly(B5AMA)-grafted CNCs were loaded with anthocyanin dye and evaluated for pH-dependent colour changing capabilities. Interestingly, anthocyanin-loaded CNCs demonstrated vibrant colour changes in both solution and dried film form upon bacterial contamination; however, limited colour changing capabilities of the composites, specifically in dried film form, were attributed to the enhanced dispersibility and antifouling capabilities of the polymer-coated CNCs. Full article

The fundamental goal of endodontic surgery is to remove the infection cause and create an ideal environment for periapical tissue and bone recovery. This systematic review aims to present evidence-based findings regarding the healing ability of endodontic materials in retrograde treatment. The study evaluates the advantages and drawbacks of commonly utilized materials, empowering clinicians with valuable insights for preoperative planning in endodontic surgery. A comprehensive search was conducted across multiple databases, including MEDLINE, Scielo, Web of Science, Scopus, Embase, and Google Scholar, using the PIOT framework. A total of 3124 papers were identified, of which 2534 remained after removing duplicates. Following a stringent selection process, 35 clinical studies were included for qualitative assessment. The risk of bias was assessed using the Risk of Bias in Non-randomized Studies—of Interventions (ROBINS-I) tool for non-randomized trials, the Newcastle–Ottawa Scale for cohort studies, and the Joanna Briggs Institute (JBI) critical appraisal checklist for cross-sectional studies. Due to high heterogeneity in study designs and outcomes, a meta-analysis could not be performed. The review identified Super Ethoxybenzoic Acid (Super EBA), Mineral Trioxide Aggregate (MTA), and Intermediate Restorative Material (IRM^®), Retroplast, Endosequence^®, and gutta-percha as the primary retrograde root filling materials. Follow-up periods ranged from 6 months to 17.5 years. Although the materials showed varying degrees of success, the overall findings highlighted that no single material demonstrated universally superior healing ability. The review also emphasized the need for standardization in future clinical trials to facilitate better comparisons. The selection of retrograde filling materials plays a pivotal role in the success of endodontic surgery. New bioceramic materials like MTA and Biodentine offer improved sealing, biocompatibility, and tissue regeneration compared to traditional materials, leading to better clinical outcomes. Full article

Mesenchymal stem cells (MSCs) have emerged as a promising tool for regenerative medicine due to their multipotency and immunomodulatory properties. According to recent research, exposing MSCs to super-low-intensity microwave radiation can have a significant impact on how they behave and operate. This review provides an overview of the most recent studies on the effects of microwave radiation on MSCs with power densities that are much below thermal values. Studies repeatedly show that non-thermal mechanisms affecting calcium signaling, membrane transport, mitochondrial activity, along ion channel activation may increase MSC proliferation, differentiation along mesodermal lineages, paracrine factor secretion, and immunomodulatory capabilities during brief, regulated microwave exposures. These bioeffects greatly enhance MSC regeneration capability in preclinical models of myocardial infarction, osteoarthritis, brain damage, and other diseases. Additional study to understand microwave treatment settings, biological processes, and safety assessments will aid in the translation of this unique, non-invasive strategy of activating MSCs with microwave radiation to improve cell engraftment, survival, and tissue healing results. Microwave-enhanced MSC treatment, if shown safe and successful, might have broad relevance as a novel cell-based approach for a variety of regenerative medicine applications. Full article

Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) infection, responsible for Coronavirus Disease 2019 (COVID-19), exhibits a spectrum of clinical manifestations, ranging from asymptomatic to severe pulmonary dysfunction or death. The variability in COVID-19 severity has largely been attributed to the host’s genetic characteristics, suggesting a polygenic genetic architecture, without significant strong evidence of sex-related genetic differences. In this Italian retrospective case–control study, we investigated the association between COVID-19 severity (severe vs. asymptomatic/oligosymptomatic healed individuals) and HLA gene variants, analyzed by next-generation sequencing (NGS). We identified significant HLA alleles (according to the conventional nomenclature), SNPs and haplotypes in the HLA-B, -C, -F, -DQA1, -DRB1, and -DRB5 genes associated with COVID-19 severity. Interestingly, these variants showed biological sex-related effects. Also, we identified specific haplotypes associated with COVID-19 severity that are shared by different conventional HLA alleles, indicated here as “super-haplotypes”. These haplotypes had a biological sex-specific impact on disease severity and markedly increased the risk of severe COVID-19 compared to the conventional HLA alleles (odds ratio of up to 15). Our data suggest that the revision of the current HLA nomenclature may help to identify variants with a stronger effect on disease susceptibility and that association studies could benefit from the stratification of patients by biological sex. If replicated in other disease models, these findings could help to define the functional diversity in immune response between sexes, also based on the HLA system. Finally, due to the global pandemic’s mortality rate, we hypothesize here that SARS-CoV-2 may have acted as a natural selection trigger, leading to a drift in HLA allelic frequencies in the general population. Full article

The University of Washington Engineered Biomaterials (UWEB) Engineering Research Center (ERC) was funded from 1996 to 2007 by the U.S. National Science Foundation. The mission of UWEB was to advance biomaterials by integrating modern biology with materials science. UWEB specifically focused on the healing and integration of medical implants. UWEB teamed biologists, physicians, engineers, and industry and demonstrated three paths that might advance biomaterials so they could seamlessly integrate and heal in the body. The three primary lines of investigation were precision porous scaffolds, super-non-fouling surfaces, and the control of matricellular proteins. The UWEB program set the groundwork for the modern field of immunoengineering. Also, UWEB invested significantly in training scientists/engineers who could freely integrate advances in biological sciences, state-of-the-art materials science, and medical technology. This historical summary of the UWEB program demonstrates that federal investment in interfacing forefront fields can yield dividends with benefits for society and the economy. Full article

Anti-fogging coatings/surfaces have attracted much attention lately because of their practical applications in a wide variety of engineering fields. In this study, we successfully developed transparent anti-fogging surfaces using a non-volatile and hygroscopic ionic liquid (IL), bis(hydroxyethyl)dimethylammonium methanesulfonate ([BHEDMA][MeSO₃]), with a high surface tension (HST, 66.4 mN/m). To prepare these surfaces, a layer of highly transparent, superhydrophilic silica (SiO₂) nano-frameworks (SNFs) was first prepared on a glass slide using candle soot particles and the subsequent chemisorption of tetraethoxysilane (TEOS). This particulate layer of SNFs was then used as the support for the preparation of the [BHEDMA][MeSO₃] layer. The resulting IL-infused SNF-covered glass slide was highly transparent, superhydrophilic, hygroscopic, and had self-healing and reasonable reversible/repeatable anti-fogging/frosting properties. This IL-infused sample surface kept its excellent anti-fogging performance in air for more than 8 weeks due to the IL’s non-volatile, HST, and hygroscopic nature. In addition, even if the water absorption limit of [BHEDMA][MeSO₃] was reached, the anti-fogging properties could be fully restored reversibly/repeatably by simply leaving the samples in air for several tens of minutes or heating them at 100 °C for a few minutes to remove the absorbed water. Our IL-based anti-fogging surfaces showed substantial improvement in their abilities to prevent fogging when compared to other dry/wet (super)hydrophobic/(super)hydrophilic surfaces having different surface geometries and chemistries. Full article

Background: The present study investigated the outcomes and possible predictive factors of autologous bone marrow cells (BMCs) therapy in patients with ”no-option“ critical limb ischaemia (CLI). It was focused on exploring the clinical background and prior statin and renin-angiotensin system (RAS)-acting agents pharmacotherapy related to the therapeutic efficacy of BMCs treatment. Methods: In the present study, we reviewed thirty-three patients (mean age 64.9 ± 10 years; 31 males) with advanced CLI after failed or impossible revascularisation, who were treated with 40 mL of autologous BMCs by local intramuscular application. Patients with limb salvage and wound healing (N = 22) were considered as responders to BMCs therapy, and patients with limb salvage and complete ischemic wound healing (N = 13) were defined as super-responders. Logistic regression models were used to screen and identify the prognostic factors, and a receiver operating characteristics (ROC) curve, a linear regression, and a survival curve were drawn to determine the predictive accuracy, the correlation between the candidate predictors, and the risk of major amputation. Results: Based on the univariate regression analysis, baseline C-reactive protein (CRP) and transcutaneous oxygen pressure (TcPO₂) values were identified as prognostic factors of the responders, while CRP value, ankle-brachial index (ABI), and bone marrow-derived mononuclear cells (BM-MNCs) concentration were identified as prognostic factors of the super-responders. An area under the ROC curve of 0.768 indicated good discrimination for CRP > 8.1 mg/L before transplantation as a predictive factor for negative clinical response. Linear regression analysis revealed a significant dependence between the levels of baseline CRP and the concentration of BM-MNCs in transplanted bone marrow. Patients taking atorvastatin before BMCs treatment (N = 22) had significantly improved TcPO₂ and reduced pain scale after BMCs transplant, compared to the non-atorvastatin group. Statin treatment was associated with reduced risk for major amputation. However, the difference was not statistically significant. Statin use was also associated with a significantly higher concentration of BM-MNCs in the transplanted bone marrow compared to patients without statin treatment. Patients treated with RAS-acting agents (N = 20) had significantly reduced pain scale after BMCs transplant, compared to the non-RAS-acting agents group. Similar results, reduced pain scale and improved TcPO₂, were achieved in patients treated with atorvastatin and RAS-acting agents (N = 17) before BMCs treatment. Results of the Spearman correlation showed a significant positive correlation between CLI regression, responders, and previous therapy before BMCs transplant with RAS-acting agents alone or with atorvastatin. Conclusions: CRP and TcPO₂ were prognostic factors of the responders, while CRP value, ABI, and BM-MNCs concentration were identified as predictive factors of the super-responders. Atorvastatin treatment was associated with a significantly increased concentration of BM-MNCs in bone marrow concentrate and higher TcPO₂ and lower pain scale after BMCs treatment in CLI patients. Similarly, reduced pain scales and improved TcPO2 were achieved in patients treated with atorvastatin and RAS-acting agents before BMCs treatment. Positive correlations between responders and previous treatment before BMCs transplant with RAS-acting agents alone or with atorvastatin were significant. Full article

β-actin belongs to cytoskeletal structures that change dynamically in cells according to various stimuli. Human skin can be considered as an organ that is very frequently exposed to various stress factors, of which light plays an important role. The present study focuses on adult human fibroblasts exposed to two types of light stress. Orange light with a wavelength of 590 nm was used here to stimulate the photosensitizer localized in the cells as a residual dose of photodynamic therapy (PDT). On the other hand, near-infrared light with a wavelength of 808 nm was considered for photobiomodulation (PBM), which is often used in healing processes. Confocal fluorescence microscopy was used to observe changes in intercellular communication, mitochondrial structures, and cytoskeletal dynamics defined by the remodulation of β-actin of fibroblasts. The number of β-actin bundles forming spherical structures was detected after light exposure. These structures as β-actin oligomers were confirmed with super-resolution microscopy. While PDT led to the disintegration of actin oligomers, PBM increased their number. The interaction of β-actin with mitochondria was observed. The combination of PDT and PBM treatments is important to minimize the side effects of cancer treatment with PDT on healthy cells, as shown by the cell metabolism assay in this work. In this work, β-actin is presented as an important parameter that changes and is involved in the response of cells to PDT and PBM. Full article

Credible assessment methods must be applied to evaluate antiseptics’ in vitro activity reliably. Studies indicate that the medium for biofilm culturing should resemble the conditions present at the site of infection. We cultured S. aureus, S. epidermidis, P. aeruginosa, C. albicans, and E. coli biofilms in IVWM (In Vitro Wound Milieu)—the medium reflecting wound milieu—and were compared to the ones cultured in the laboratory microbiological Mueller–Hinton (MH) medium. We analyzed and compared crucial biofilm characteristics and treated microbes with polyhexamethylene biguanide hydrochloride (PHMB), povidone-iodine (PVP-I), and super-oxidized solution with hypochlorites (SOHs). Biofilm biomass of S. aureus and S. epidermidis was higher in IVWM than in MH medium. Microbes cultured in IVWM exhibited greater metabolic activity and thickness than in MH medium. Biofilm of the majority of microbial species was more resistant to PHMB and PVP-I in the IVWM than in the MH medium. P. aeruginosa displayed a two-fold lower MBEC value of PHMB in the IVWM than in the MH medium. PHMB was more effective in the IVWM than in the MH medium against S. aureus biofilm cultured on a biocellulose carrier (instead of polystyrene). The applied improvement of the standard in vitro methodology allows us to predict the effects of treatment of non-healing wounds with specific antiseptics. Full article

Concrete self-healing technology is an effective method for autonomously repairing cracks, which can reduce the maintenance costs of concrete components and prolong their service life. This study investigates the mechanical properties and self-healing abilities of mortar with internally mixed superabsorbent polymers (SAPs) and crystalline admixtures (CAs). The compressive strength and recovery rate of the specimens were evaluated, and the self-healing performance of concrete specimens was assessed through water absorption tests and optical microscopy observation of healed cracks. Microscopic analysis of the crack fillings was conducted using SEM-EDS and XRD tests, revealing the mechanism of the synergistic effect of SAPs and CAs on self-healing. The results indicate that the physical filling effect of SAPs’ water absorption and expansion almost completes the healing action before the 7-day healing age, with a weakened healing ability after this age. The chemical action of CA activation continues to heal cracks up to the 90-day healing age. When SAPs and CAs are incorporated together into the concrete matrix, the mortar specimens exhibit the best healing ability before the 7-day healing age. As water is released from the SAPs, the ongoing activation reaction of CAs shows the most effective healing result at the 90-day age. SEM-EDS analysis confirmed that the addition of CAs increases the Ca/Si ratio of calcium silicate hydrated, transforming it from an amorphous cluster structure to a needle-like structure. Furthermore, the internal curing effect of SAPs promotes the activation reaction of CAs, resulting in a greater quantity of more densely structured calcium silicate hydrated. Full article

Hydrogels have received increasing interest owing to their excellent physicochemical properties and wide applications. In this paper, we report the rapid fabrication of new hydrogels possessing a super water swelling capacity and self-healing ability using a fast, energy-efficient, and convenient method of frontal polymerization (FP). Self-sustained copolymerization of acrylamide (AM), 3-[Dimethyl-[2-(2-methylprop-2-enoyloxy)ethyl]azaniumyl]propane-1-sulfonate (SBMA), and acrylic acid (AA) within 10 min via FP yielded highly transparent and stretchable poly(AM-co-SBMA-co-AA) hydrogels. Thermogravimetric analysis and Fourier transform infrared spectroscopy confirmed the successful fabrication of poly(AM-co-SBMA-co-AA) hydrogels with a single copolymer composition without branched polymers. The effect of monomer ratio on FP features as well as porous morphology, swelling behavior, and self-healing performance of the hydrogels were systematically investigated, showing that the properties of the hydrogels could be tuned by adjusting the chemical composition. The resulting hydrogels were superabsorbent and sensitive to pH, exhibiting a high swelling ratio of up to 11,802% in water and 13,588% in an alkaline environment. The rheological data revealed a stable gel network. These hydrogels also had a favorable self-healing ability with a healing efficiency of up to 95%. This work contributes a simple and efficient method for the rapid preparation of superabsorbent and self-healing hydrogels. Full article

It is well known that skin wound healing could be severely impaired in space. In particular, the skin is the tissue at risk of injury, especially during human-crewed space missions. Here, we propose a hybrid system based on the biocompatible poly 2-hydroxyethyl methacrylate (pHEMA) to actively support a nanocontainer filled with the drug. Specifically, during the cryo-polymerization of HEMA, halloysite nanotubes (HNTs) embedded with thymol (Thy) were added as a component. Thy is a natural pharmaceutical ingredient used to confer wound healing properties to the material, whereas HNTs were used to entrap the Thy into the lumen to ensure a sustained release of the drug. The as-obtained material was characterized by chemical–physical methods, and tests were performed to assess its ability for a prolonged drug release. The results showed that the adopted synthetic procedure allows the formation of a super absorbent system with good swelling ability that can contain up to 5.5 mg of Thy in about 90 mg of dried sponge. Releasing tests demonstrated the excellent material’s ability to perform a slow controlled delivery of 62% of charged Thy within a week. As humans venture deeper into space, with more extended missions, limited medical capabilities, and a higher risk of skin wounds, the proposed device would be a versatile miniaturized device for skin repair in space. Full article

The extraordinary material graphene arrived in the fields of engineering and science to instigate a material revolution in 2004. Graphene has promptly risen as the super star due to its outstanding properties. Graphene is an allotrope of carbon and is made up of sp²-bonded carbon atoms placed in a two-dimensional honeycomb lattice. Graphite consists of stacked layers of graphene. Due to the distinctive structural features as well as excellent physico-chemical and electrical conductivity, graphene allows remarkable improvement in the performance of electrospun nanofibers (NFs), which results in the enhancement of promising applications in NF-based sensor and biomedical technologies. Electrospinning is an easy, economical, and versatile technology depending on electrostatic repulsion between the surface charges to generate fibers from the extensive list of polymeric and ceramic materials with diameters down to a few nanometers. NFs have emerged as important and attractive platform with outstanding properties for biosensing and biomedical applications, because of their excellent functional features, that include high porosity, high surface area to volume ratio, high catalytic and charge transfer, much better electrical conductivity, controllable nanofiber mat configuration, biocompatibility, and bioresorbability. The inclusion of graphene nanomaterials (GNMs) into NFs is highly desirable. Pre-processing techniques and post-processing techniques to incorporate GNMs into electrospun polymer NFs are precisely discussed. The accomplishment and the utilization of NFs containing GNMs in the electrochemical biosensing pathway for the detection of a broad range biological analytes are discussed. Graphene oxide (GO) has great importance and potential in the biomedical field and can imitate the composition of the extracellular matrix. The oxygen-rich GO is hydrophilic in nature and easily disperses in water, and assists in cell growth, drug delivery, and antimicrobial properties of electrospun nanofiber matrices. NFs containing GO for tissue engineering, drug and gene delivery, wound healing applications, and medical equipment are discussed. NFs containing GO have importance in biomedical applications, which include engineered cardiac patches, instrument coatings, and triboelectric nanogenerators (TENGs) for motion sensing applications. This review deals with graphene-based nanomaterials (GNMs) such as GO incorporated electrospun polymeric NFs for biosensing and biomedical applications, that can bridge the gap between the laboratory facility and industry. Full article

Novel solvent-free ultra-extensible, tough, and self-healing nanocomposite elastomers were synthesized. The self-assembled materials were based on the copolymer matrix poly(methoxyethyl acrylate-co-sodium methacrylate) physically crosslinked by clay nano-platelets (‘poly[MEA-co-SMA]/clay’). Depending on the content of SMA, the super-elastomers were predominantly hydrophobic, water-swelling, or fully water-soluble, and hence repeatedly processible. The SMA co-monomer introduces a tremendous increase in tensile strength, an increase in toughness, while ultra-extensibility is preserved. By tuning the contents of nano-clay and SMA co-monomer, a very wide range of product properties was achieved, including extreme ultra-extensibility, or high stiffness combined with more moderate super-extensibility, or very different values of tensile strength. There was very attractive, great improvement in autonomous self-healing ability induced by SMA, combined with tremendously enhanced self-recovery of internal mechanical damage: even complete self-recovery could be achieved. The ionic SMA repeat units were found to assemble to multiplets, which are phase-separated in the hydrophobic polyMEA matrix. The dynamics of SMA-units-hopping between these aggregates was of key importance for the mechanical, visco-elastic, tensile, and self-healing properties. The studied super-elastomers are attractive as advanced self-healing materials in engineering, soft robotics, and in medical or implant applications. Full article

Olive oil is an important component of Mediterranean diet widely, consumed thanks to its numerous health-healing properties. Its quality is dependent upon a set of factors (genotypic, environmental, agronomic practices, ripening, etc). These are well documented, but little is known about the impact of extraction technology on ‘Moroccan Picholine’ olive oil quality. In this paper, physicochemical traits of olive oil (cv ‘Moroccan Picholine’) were investigated according to extraction technology namely super pressure (SP), 2-phase (2P), and 3-phase (3P) systems as well as traditionally extracted oil (Alwana Oil, AO). The obtained results revealed significant differences (p < 0.05) in terms of the studied physicochemical traits. The investigated oil samples were classified as extra-virgin olive oil. Oil samples from super pressure and AO marked by high records of peroxide value, acidity, K270, fatty acids and trans fatty acids likely due to partial oxidation during extraction. AO was marked by high MUFA, stigmasterol, brassicosterol, 2P displayed high SFA and β-sitosterol, and 3P had high PUFA, SFA, ∆7-avenasterol, and ∆7-stigmasterol. These results were confirmed by principal component analysis, cluster analysis and artificial neural networks. In conclusion, continuous systems (2- and 3-phase) produced olive oil of better quality as compared to super-pressure and traditionally extracted oil. Full article