Search Results (333)

Soil organic carbon (SOC) responses to straw return are strongly influenced by active carbon dynamics and extracellular enzyme responses, yet how these processes vary with initial SOC status and long-term straw-return history remains unclear. To address this question, we conducted a controlled incubation experiment using soils from long-term straw removal (CK) and straw return (SR) plots at two sites with contrasting SOC levels: a carbon-poor fluvo-aquic soil in Quzhou (QZ) and a carbon-rich black soil in Gongzhuling (GZL). Three fresh-straw input levels were imposed, and CO₂ release, SOC, labile C and N pools, extracellular enzyme activities, and ecoenzymatic stoichiometry were determined. Fresh-straw input markedly stimulated carbon mineralization in both soils, but SOC responses differed substantially. In QZ, SOC increased 12.1–15.7% at day 7 (vs. T0) and remained 6.7–12.1% above the control at day 90 under the long-term straw-return background. In contrast, GZL showed only minor early SOC responses, and doubled straw input reduced SOC 4.9–9.5% at day 90 despite a stronger dissolved organic carbon (DOC) pulse and greater cumulative CO₂ release. Enzyme responses also differed between soils: higher straw input in QZ enhanced β-cellobiohydrolase (CBH), β-xylosidase (BX), and especially L-leucine aminopeptidase (LAP), accompanied by lower ecoenzymatic C:P and higher vector angle, whereas GZL showed later activation of CBH, BX, and NAG with only slight changes in vector angle. Overall, our results indicate that initial SOC status and long-term straw-return history jointly regulate whether fresh-straw input promotes net SOC accumulation or enhanced mineralization. Full article

The release of heavy metals into the environment due to human activities is increasing, and this has led to concern about heavy-metal contamination on farmland. Prior studies have primarily focused on short-term investigations or specific pollution sources, lacking systematic monitoring of cadmium’s long-term input-output fluxes and their mass balance at the scale of a complete farmland ecosystem. This study clarified the cadmium (Cd) pollution trends for a typical paddy system in southern China. A six-year long-term monitoring study (2019–2024 inclusive) of a Cd-contaminated paddy system in Ningxiang City, Hunan Province, China, was conducted. The Cd flux dynamics for three input pathways (atmospheric deposition, irrigation water, and fertilizer) and three output pathways (crop harvesting, surface runoff, and subsurface infiltration) were investigated. The results showed that atmospheric deposition is the primary source of Cd input, accounting for 76% of total inputs, and leads to persistent net accumulation of soil Cd. Straw removal serves as the dominant output mechanism, facilitating substantial Cd removal, representing 77% of total Cd exports, while straw retention significantly reduces export fluxes. The study found that the net Cd fluxes from 2019 to 2024 were 1.994, 2.624, 8.984, 11.299, 9.944, and 20.162 g·(hm²·a)⁻¹, straw removal was primarily adopted during the period. A net flux analysis showed that progressive soil Cd accumulation had occurred over the study period. The results suggest that science-based straw management is critical when attempting to mitigate soil Cd pollution and enhance safe land utilization. These findings can be used to improve region-specific pollutant source control strategies and soil management policies. Full article

Global agriculture generates more than 5 billion tonnes of post-harvest crop residues each year, most of which remain unused for energy production. Within the broader landscape of advanced biomass and waste conversion technologies (thermochemical and biochemical pathways), producing biomethane from agricultural residues represents a complementary waste-to-energy route that converts decentralized feedstock into a standardized energy carrier. Mobilizing this agro-biomass for biogas/biomethane production via the anaerobic digestion of crop residues offers a promising instrument for decarbonizing agriculture, reducing greenhouse gas emissions, and advancing a circular bioeconomy. This study provides a techno-economic, environmental, and market assessment of biomethane production from post-harvest residues—specifically wheat and barley straw and maize stover—in Ukraine. We estimate the feedstock potential of crop residues and substantiate environmentally permissible removal levels accounting for soil organic matter requirements; we also characterize the role of digestate and biochar amendments in improving soil fertility, increasing mineral nitrogen availability, and enhancing crop yields. The results indicate substantial greenhouse gas mitigation potential relative to fossil natural gas. Practical recommendations are proposed to scale biomethane production from crop residues as part of Ukraine’s agricultural sustainability strategy. Under current cost and policy assumptions, many biomethane projects in Ukraine approach commercial viability, particularly in regions where damaged gas infrastructure creates local demand for a decentralized gas supply. The paper evaluates market assessment and investment feasibility of crop-residue biomethane scenarios under cost, regulatory, and infrastructure constraints. Overall, the findings suggest that agricultural residues can serve as a key feedstock for decarbonizing agriculture and biomethane-based energy systems in Ukraine. Full article

The integration of appropriate tillage practices with straw returning can effectively mitigate soil degradation in Northeast China. However, limited research has explored the impacts of different tillage practices combined with varying straw incorporation depths on the structure and diversity of soil microbial communities. In 2016, a field experiment was initiated using a two-factor split-plot design, featuring six treatments: two tillage depths of 10 cm (D10) and 30 cm (D30) combined with three straw management practices—straw mixing incorporation (SM), straw deep burial (SB), and straw removal (SR). Soil samples collected in 2019 were analyzed for multiple soil properties and microbial indices. Results indicated that both straw returning and tillage depth significantly influenced soil organic carbon (SOC), soil total nitrogen (STN), total phosphorus (TP), and total potassium (TK), with the D30 treatment combined with straw returning optimizing soil nutrient contents most effectively. Under straw returning, D10 significantly increased urease activity in the 0–10 cm soil layer, whereas D30 enhanced this enzyme activity in the 10–30 cm soil layer, while β-glucosidase activity was less responsive to tillage depth. For the D10 treatment with straw returning, acid phosphatase activity was markedly higher than that in the straw removal treatment, whereas N-acetyl-β-D-glucosaminidase activity exhibited the opposite trend. Straw-returning methods had no significant effects on the bacterial and fungal Chao1 indices, while the Shannon index was positively correlated with key soil properties. Redundancy analysis (RDA) of microbial community composition at the phylum level and soil environmental factors revealed that soil nutrients in the 0–10 cm soil layer were positively correlated with Actinobacteriota, Ascomycota, and Basidiomycota, whereas the explanatory power of soil nutrients for microbial community variation decreased in the 10–30 cm soil layer. Our results highlight that tillage depth and straw returning can regulate soil microbial community composition and enhance soil nutrient cycling, thereby providing a theoretical basis for optimizing the combined application mode of tillage and straw-returning practices in Northeast China. Full article

Straw substitution for coal in direct-fired power generation can significantly reduce pollutant emissions. However, there are numerous challenges to using straw in direct-burning power generation, and the question of benefits also looms large. In this study, an environmental benefit assessment model for the straw power supply chain was developed using the life cycle assessment method from an environmental emission cost perspective. Pollutant emissions and environmental benefits were analyzed for four straw power supply chain models under the assumptions of this study. The results indicates that the CO₂ in the straw power generation supply chain system mainly comes from the straw collection and transport stages, which account for 29% and 70%, respectively. The SO₂ and PM₁₀ emissions mainly originate from the power generation stage. The environmental benefits of substituting straw for coal-fired power generation range from 1,859,895.02 to 1,875,326.36 USD. Further sensitivity analysis suggests that fertilizer application rates and transport distance are negatively correlated with the system’s environmental benefit, whereas the adoption of advanced dust removal technologies, increases in the charge standards and improvements in energy efficiency are positively correlated. These results can promote the sustainable development of the biomass power generation industry. Full article

To efficiently remove oxytetracycline (OTC) pollution from water bodies, this study utilized fava bean straw as a precursor to synthesize iron-nitrogen (Fe/N) co-doped biochar via pyrolysis. By regulating the synthesis ratio of iron and nitrogen, the material’s adsorption performance was optimized. The adsorption characteristics and mechanisms of OTC were systematically investigated. The findings reveal that when the proportion of iron to nitrogen is set at 1:3, the adsorption efficacy reaches its peak. Moreover, this material demonstrates outstanding reusability characteristics. The outcomes of kinetic fitting suggest that the adsorption procedure adheres to the pseudo-second-order kinetic model (R² = 0.967), primarily characterized by chemisorption. The isothermal adsorption data better fit the Langmuir model (R² = 0.9984), with a theoretically attainable upper-limit adsorption capacity reaching 666.13 mg/g. This signifies the occurrence of monolayer adsorption, while the adsorption procedure constitutes an endothermic reaction. Based on characterization and mechanistic analysis, it can be concluded that the adsorption mechanism of Fe1N3KBC on OTC mainly involves π-π stacking interactions and chelation reactions. The Fe/N co-doped biochar prepared in this present research features readily available raw materials and a simple preparation process, combining high adsorption efficiency with excellent stability. It provides a novel technical paradigm for developing environmentally friendly adsorbents to address antibiotic pollution in water bodies. Full article

Biochar provides a porous scaffold, conductive carbon framework and redox-active surface functional that can promote microbial attachment and extracellular electron flow. However, how feedstock-dependent biochar properties regulate the biochar–cell interface and microbial metabolism during contaminant removal remains insufficiently understood. Here, biochar derived from rice husk, corn straw and corn cob was used to immobilize Pseudomonas chlororaphis for triclocarban removal in batch microcosms. Multiscale analyses, including scanning electron microscopy (SEM), fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), (electrochemical impedance spectroscopy (EIS) and liquid chromatography–mass spectrometryLC-MS, were combined to link the biochar structure, interface and extracellular metabolism signatures with triclocarban (TCC) removal. Compared with free cells, all composites enhanced TCC removal and exhibited altered interfacial functional-group features together with substantially reduced fitted charge-transfer resistance, indicating facilitated interfacial electron exchange. Untargeted metabolomics further revealed consistent remodeling of extracellular redox-associated metabolite signatures upon immobilization, with increased quinone/polyphenol-associated features and pathway-level shifts related to redox homeostasis. Among feedstocks, the corn cob composite showed the highest triclocarban removal. Overall, this work proposes an evidence-supported “structure–interface–metabolism” framework for interpreting how agricultural-residue biochars modulate biofilm interfaces and redox-related metabolic signatures to improve triclocarban removal, providing guidance for designing biochar-supported bioprocesses for halogenated micropollutants. Full article

Aiming at the problems of inter-row straw congestion, soil accumulation, and consequent uneven seeding depth during high-speed sowing with narrow row spacing under the summer maize no-tillage sowing mode in the Huang-Huai-Hai region, this study proposed a maize seedling belt pre-sowing treatment device suitable for narrow row spacing operation by analyzing the physical properties of straw and soil in the region. Dynamic analysis of the mechanical device was carried out, and the key factors affecting the straw removal effect of the seedling belt and the degree of soil disturbance were identified as machine offset distance, traction speed, and straw-cleaning wheel angle. Discrete element method simulation experiments were conducted via EDEM-ADAMS coupling; the key factors were simulated and optimized, and the optimal parameter combination of the device was determined as follows: machine offset distance of 165 cm (the relative distance between the front and rear positions of the right wheel of adjacent unit cleaning components), traction speed of 11 km/h, and straw-cleaning wheel angle of 44°. Field validation tests of the prototype were performed. The test results showed that the overall straw removal rate of the seedling belt reached 95%, and no large-scale straw and soil accumulation caused by pushing was observed between rows. Compared with the simulation results, the error of straw removal rate was only 0.5%. Sowing comparison tests were conducted, and the results indicated that the device could significantly improve the uniformity of seeding depth and meet the seedling belt quality requirements for high-speed sowing with narrow row spacing of summer maize. This study provides new ideas and methods for the design of straw-cleaning mechanisms in no-till seeding systems. Full article

Maintaining healthy soil is fundamental to sustainable agriculture, and soil organic carbon (SOC) is a key indicator of soil health. Although the application of straw and biochar is known to enhance SOC, their specific effects on the soil health index (SHI) and the underlying microbial drivers across different soil layers—particularly in the 20–40 cm subsoil layer—remain insufficiently quantified. This study therefore aimed to evaluate the effects of straw and biochar application on the SHI and associated microbial indicators. The experiment included five treatments: conventional planting with straw removed (CK), homogeneous incorporation of mechanically crushed straws into the 0–20 cm topsoil layer (SR), biochar burial at 40 cm (SD), combined application of returning mechanically crushed straws in the topsoil and biochar burial at 40 cm (SB), and biochar incorporation into the topsoil combined with burial of entire maize plants at 40 cm (BS). Results showed that SR, SD, SB and BS all enhanced SHI values compared to CK in the topsoil, with BS exhibiting the largest increase (23.07%). In the subsoil, SB exhibited the highest SHI, representing increases of 64.52% and 18.60% compared with CK and BS, respectively. This was attributable to the greater enhancement of key subsoil parameters under SB than under BS, including microbial biomass carbon (17.52%), microbial biomass nitrogen (24.20%), leucine aminopeptidase (91.20%), and SOC (181.38%). Furthermore, surface straw application reduces fungal diversity, whereas biochar application in the subsoil significantly enhanced bacterial diversity. Biochar improved SHI both directly through SOC increase and indirectly via the increase in microbial activity and enzyme content mediated by SOC. Full article

Composting chicken manure is a source of significant ammonia (NH₃) emissions, which, because of propagation, contributes to the eutrophication of the environment and decreases in air quality. Therefore, it is reasonable to use methods to limit its emission into the atmosphere. Biofiltration, using the metabolic activity of nitrifying and heterotrophic microorganisms capable of oxidizing ammonia, is an effective method to reduce ammonia emissions. In addition, the performance of the biofiltration process depends on operational parameters such as the humidity of the medium, the temperature, the contact time of the gas with the biofiltering medium, and the chemical composition and structure of the filter material. The aim of the study was to evaluate the effectiveness of biofilter fillings in reducing ammonia emissions from composting chicken manure along with the identification of factors allowing us to determine the proposed design solution as the most advantageous in terms of efficiency. Experiments on reducing odour emissions with biofiltration were carried out in two compact composting reactors, in which a compost mixture with a C:N ratio of 10:1 was used. The mixture was prepared in a ratio of 5:1 of chicken manure to the structuring material, with wheat straw used as the structuring material. Based on the results of the research on the course of the composting process, high values of ammonia concentration were recorded. Ammonia concentrations of 886 ppm (composter 1) and 811 ppm (composter 2) were recorded, which confirms the intensive nature of this gas emissions during the process of stabilizing the chicken manure. As part of the conducted research, the effectiveness of biofiltration in reducing ammonia emissions was evaluated by analysing the influence of the aeration intensity of the biofilter (20 dm³/h and 50 dm³/h), directly determining the time of contact of the gas with the bed (EBCT—Empty Bed Contact Time). Coconut-activated carbon was used as a filter bed, which was an effective carrier for the development of microorganisms responsible for the biological removal of ammonia from waste gases generated during composting. In addition, this material showed the ability to physically adsorb ammonia, thus supporting the process of its elimination. Each of the test stations has been equipped with a biofiltration installation. To determine the effectiveness of biological removal of ammonia and to assess the legitimacy of the use of selected strains of microorganisms in the process of biological removal of ammonia, the bed of one of the biofilters (biofilter 2) was inoculated with a strain of nitrifying bacteria. During the study, the high efficiency of ammonia removal because of biofiltration was noted in each of the configurations. In the case of an aeration intensity of 20 dm³/h, a reduction in emissions of 99% was achieved; with a higher aeration value, i.e., 50 dm³/h, the efficiency was 89%. These results indicate that the intensity of aeration has a significant impact on the efficiency of the biofiltration process. The analysis of a biofilter enriched with a strain of nitrifying bacteria requires long-term testing. This is important to reliably determine the effect of inoculation on the efficiency of the biological removal of ammonia in biofilters. It has been shown that optimizing these factors allows us to achieve a reduction in ammonia emissions of up to 90%, while minimizing the formation of unpleasant odours. The use of biofiltration in composting systems for organic waste of animal origin is an effective, sustainable solution that fits into the idea of sustainable development, combining the efficiency of air purification technology with environmental protection and the responsible management of resources. This study demonstrates that biofiltration using coconut-shell-activated carbon is an effective and economical method for reducing ammonia and odour emissions from composting chicken manure. The results provide valuable theoretical and practical information on emissions management in organic waste composting processes. Data from this study could be useful in developing strategies to minimize odour emissions, including from the agricultural sector. Full article

Agricultural leftovers from oilseed crops represent an underutilized lignocellulosic resource for integrated biorefinery. In this work, rapeseed straw (RS) and sunflower stalk (SS) were evaluated as raw materials for the simultaneous recovery of hemicelluloses, lignin, and cellulose-rich fibers. Direct soda pulping (20% NaOH, 160 °C, 45 min) or a combination of soda pulping with water pretreatment or alkaline extraction (water or 2% NaOH, 110 °C, 40 min) were the methods used in the process. Acid precipitation was used to remove lignin from the process fluids, whereas ethanol was used to separate hemicelluloses. FTIR spectroscopy, HPLC of acidic hydrolysates, and chemical composition analysis were used to analyze solid fractions and recovered biopolymers. The combination alkaline extraction–soda pulping produced the greatest material removal: 55% for RS and 70% for SS. Xylan was the main component of the isolated hemicellulose fraction: 44.86% for RS and 40.09% for SS. Paper sheets produced from the resulting pulps exhibited tensile strength indices of 35–55 N·m/g and burst indices of 1.1–2.4 kPa·m²/g, meeting requirements for hygiene and fluting packaging papers. These results prove that RS and SS are suitable feedstocks for integrated, multi-stream biorefinery, enabling the concurrent production of paper-making fibers and value-added biopolymers. Full article

Sizing is a critical operation in woven fabric production, as it enhances weaving efficiency by improving warp yarn performance. Conventional sizing agents include maize starch, polyvinyl alcohol (PVA), and commercial carboxymethyl cellulose (CMC). In this study, a low-cost and biodegradable carboxymethyl cellulose derived from wheat straw (CMC_ws) was investigated as an alternative sizing agent for cotton open-end yarns with a count of Nm 12.2. The high degree of substitution (DS = 1.23) of CMC_ws indicates extensive carboxymethylation, which enhances the polymer’s hydrophilicity and solubility in water. This, in turn, contributes to a higher apparent viscosity (η = 903.03 cP at 300 s⁻¹), reflecting stronger molecular chain interactions and better film-forming ability. CMC_ws was applied using a high-pressure squeezing technique, and its effect on yarn performance was evaluated in terms of tensile properties, film characteristics, and yarn surface morphology. The results showed that CMC_ws provided a tenacity gain of 28.57%, a hairiness reduction of 54.34%, and an abrasion resistance gain of 37.14%. These values fall within acceptable industrial ranges and are comparable to those obtained using conventional sizing agents. Furthermore, the optimized CMC_ws formulation, containing plasticizer and lubricant additives, exhibited good desizing efficiency, with effective removal achieved in hot water. The findings indicate that wheat-straw-derived CMC_ws is a viable, sustainable alternative to traditional sizing agents for woven fabric production. Full article

Remediating cadmium (Cd) contamination in aquatic and terrestrial environments has become an urgent environmental priority. Biochar has been widely employed for heavy metal removal due to its wide availability, strong adsorption capacity, and potential for recycling agricultural waste. In this study, samples of alkali–Fe-modified biochar (Fe@NaOH-SBC, Fe@NaOH-HBC, and Fe@NaOH-MBC) were prepared from agricultural wastes (ginger straw, Sichuan pepper branches, and kiwi leaves) through NaOH and FeCl₃·6H₂O modification. A comprehensive characterization confirmed that the alkali–Fe-modified biochar exhibits a higher specific surface area, richer functional groups, and successful incorporation of the iron oxides Fe₃O₄ and α-FeOOH. The fitting parameter qmax from the Langmuir model indicates that the alkali–Fe modification of carbon significantly enhanced its maximum capacity for Cd²⁺ adsorption. Furthermore, a synergistic effect was observed between iron oxide loading and alkali modification, outperforming alkali modification alone. Furthermore, a 30-day soil incubation experiment revealed that the application of alkali–Fe-modified biochar significantly increased soil pH, SOM, and CEC while reducing the available cadmium content by 13.34–33.94%. The treatment also facilitated the transformation of highly bioavailable cadmium species into more stable, less bioavailable forms, thereby mitigating their potential entry into the food chain and the associated human health risks. Moreover, short-term spinach seed germination experiments confirmed that treatments with varying additions of alkali–Fe-modified biochar mitigated the inhibition of seed physiological processes by high concentrations of available cadmium to varying degrees. Overall, this study provides a sustainable and effective strategy for utilizing agricultural waste in the remediation of cadmium-contaminated water and soil systems. Full article

Atrazine (ATZ), a typical triazine herbicide with a long half-life and recalcitrant biodegradation, contaminates water and soil, necessitating efficient removal technologies. Conventional adsorbents have limited capacity and stability, while sesame straw-derived biochar realizes agricultural waste recycling and provides an efficient, economical, and eco-friendly adsorbent. Sepiolite, a natural mineral with a unique fibrous structure and a high specific surface area, has attracted widespread attention. Therefore, in this work, the agricultural waste of sesame hulls and sepiolite were used as precursors to prepare a composite material of sesame hull biochar/sepiolite (KNPB) through co-mixing heat treatment, followed by sodium hydroxide activation and pyrolysis. The results showed that, under the conditions of an adsorbent dosage of 3 g/L, pH of 6.8, and an adsorption time of 360 min, the removal rate of 3 mg/L ATZ by KNPB was 89.14%. Reusability experiments further demonstrated that KNPB has the potential for practical application in water treatment. Additionally, by integrating adsorption kinetics and isotherm analysis with a suite of characterization results from BET, FTIR, and XPS, the adsorption mechanism of KNPB for ATZ was further clarified to be primarily based on pore-filling, π–π interactions, and hydrogen bonding. This study not only provides a new idea for the resource utilization of waste sesame straw, but also provides scientific guidance for the solution of atrazine pollution, which has important environmental and economic significance. Full article

Biochar is widely recognized for its ability to immobilize heavy metals in soil, yet its direct effect on plant physiological metal-sequestration capacity remains poorly understood. This study explores a critical distinction between two mechanisms: direct, concurrent metal immobilization by biochar versus its capacity to physiologically precondition plants, altering their inherent metal uptake and distribution. Using a hydroponic design with pH-matched controls, the latter was isolated by preconditioning rice plants with peanut straw biochar (PSB) or corn straw biochar (CSB) and subsequently removing amendments before cadmium (Cd) exposure. Our results reveal that biochar (PSB) preconditioning may modify root architecture and surface chemistry, enhancing negative zeta potential and functional group density. This modification increased root Cd adsorption capacity by 50.1% and 142.7% within 2 h or 2.2% and 52.6% within 48 h compared to the normal and pH-adjusted controls, respectively, with shifted metal speciation toward stable complexes. However, this enhanced root sequestration coincided with an increased translocation factor, elevating shoot Cd content by 78% compared to the normal control. In contrast, CSB preconditioning showed negligible effects. Our findings suggest that biochar’s net impact on metal distribution is probably the product of two temporally distinct processes: chemical immobilization in growth media versus physiological preconditioning effects. This dual mechanism framework may explain the variability in literature reports on the effect of biochar on heavy metal uptake by plants. It also highlights the need for holistic biochar risk assessment that considers both chemical and plant physiological pathways in both soil and hydroponic systems. Full article