Search Results (71)

In many developing African countries, milk safety is often managed through traditional methods such as fermentation or boiling over firewood. While these approaches reduce some microbial risks, they present critical limitations. Firewood dependency contributes to deforestation, depletion of agricultural residues, and loss of soil fertility, which, in turn, compromise environmental health and food security. Solar pasteurization provides a reliable and sustainable method for thermally inactivating pathogenic microorganisms in milk and other perishable foods at sub-boiling temperatures, preserving its nutritional quality. This study aimed to evaluate the thermal and microbial performance of a low-cost solar milk pasteurization system, hypothesized to effectively reduce microbial contaminants and retain milk quality under natural sunlight. The system was constructed using locally available materials and tailored to the climatic conditions of the Savanna ecological zone in West Africa. A flat-plate glass solar collector was integrated with a 0.15 cm thick stainless steel cylindrical milk vat, featuring a 2.2 cm hot water jacket and 0.5 cm thick aluminum foil insulation. The system was tested in Navrongo, Ghana, under ambient temperatures ranging from 30 °C to 43 °C. The pasteurizer successfully processed up to 8 L of milk per batch, achieving a maximum milk temperature of 74 °C by 14:00 GMT. Microbial analysis revealed a significant reduction in bacterial load, from 6.6 × 10⁶ CFU/mL to 1.0 × 10² CFU/mL, with complete elimination of coliforms. These results confirmed the device’s effectiveness in achieving safe pasteurization levels. The findings demonstrate that this locally built solar pasteurization system is a viable and cost-effective solution for improving milk safety in arid, electricity-limited regions. Its potential scalability also opens avenues for rural entrepreneurship in solar-powered food and water treatment technologies. Full article

In the context of building a new type of power system, the optimal operation of high-proportion new-energy distribution networks (HNEDNs) is a current hot topic. In this paper, a stochastic distribution robust optimization method for HNEDNs that considers energy-storage refinement modeling is proposed. First, an energy-storage lifetime loss model based on the rainfall-counting method is constructed, and then an optimal operation model of an HNEDN considering energy storage refinement modeling is constructed, aiming to minimize the total operation cost while taking into account the energy cost and the penalty cost of abandoning wind and solar power. Then, a source-load uncertainty model of HNEDN is constructed based on the Wasserstein distance and conditional value at risk (CvaR) theory, and the HNEDN optimization model is reconstructed based on the stochastic distribution robust optimization method; based on this, the multiple linearization technique is introduced to approximate the reconstructed model, which aims to both reduce the difficulty in solving the model and ensure the quality of the solution. Finally, the modified IEEE 33-bus power distribution system is used as an example for case analysis, and the simulation results show that the method presented in this paper, through reducing the loss of life in the battery storage device, can reduce the average daily energy storage depreciation cost compared to an HNEDN optimization method that does not take the energy storage life loss into account; this, in turn, reduces the total operating cost of the system. In addition, the stochastic distribution robust optimization method used in this paper can adaptively adjust the economy and robustness of the HNEDN operation strategy according to the confidence level and the available historical sample data on new energy-output prediction errors to obtain the optimal HNEDN operation strategy when compared with other uncertainty treatment methods. Full article

Decentralized desalination systems driven by renewable energy sources have surfaced as a feasible way to alleviate water scarcity in arid and rural areas. This bibliometric study aims to clarify the research trends, conceptual frameworks, and cooperative dynamics in the scientific literature on decentralized renewable-powered desalination techniques. Using a thorough search approach, 1354 papers were found. Duplicates, thematically unrelated works, and entries with poor information were removed using the PRISMA 2020 framework. A selected 832 relevant papers from a filtered dataset were chosen for in-depth analysis. Quantitative measures were obtained by means of Bibliometrix; network visualisation was obtained by means of VOSviewer (version 1.6.19) and covered co-authorship, keyword co-occurrence, and citation structures. Over the previous 20 years, the data show a steady rise in academic production, especially in the fields of environmental science, renewable energy engineering, and water treatment technologies. Author keyword co-occurrence mapping revealed strong theme clusters centred on solar stills, thermoelectric modules, reverse osmosis, and off-grid systems. Emphasizing current research paths and emerging subject borders, this paper clarifies the intellectual and social structure of the field. The outcomes are expected to help policy creation, cooperative projects, and strategic planning meant to hasten innovation in sustainable and decentralized water desalination. Full article

This study evaluates the feasibility of repurposing produced water—an abundant byproduct of hydrocarbon extraction—for green hydrogen production in Wyoming, USA. Analysis of geospatial distribution and production volumes reveals that there are over 1 billion barrels of produced water annually from key basins, with a general total of dissolved solids (TDS) ranging from 35,000 to 150,000 ppm, though Wyoming’s sources are often at the lower end of this spectrum. Optimal locations for hydrogen production hubs have been identified, particularly in high-yield areas like the Powder River Basin, where the top 2% of fields contribute over 80% of the state’s produced water. Detailed water-quality analysis indicates that virtually all of the examined sources exceed direct electrolyzer feed requirements (e.g., <2000 ppm TDS, <0.1 ppm Fe/Mn for target PEM systems), necessitating pre-treatment. A review of advanced treatment technologies highlights viable solutions, with estimated desalination and purification costs ranging from USD 0.11 to USD 1.01 per barrel, potentially constituting 2–6% of the levelized cost of hydrogen (LCOH). Furthermore, Wyoming’s substantial renewable-energy potential (3000–4000 GWh/year from wind and solar) could sustainably power electrolysis, theoretically yielding approximately 0.055–0.073 million metric tons (MMT) of green hydrogen annually (assuming 55 kWh/kg H₂), a volume constrained more by energy availability than water supply. A preliminary economic analysis underscores that, while water treatment (2–6% LCOH) and transportation (potentially > 10% LCOH) are notable, electricity pricing (50–70% LCOH) and electrolyzer CAPEX (20–40% LCOH) are dominant cost factors. While leveraging produced water could reduce freshwater consumption and enhance hydrogen production sustainability, further research is required to optimize treatment processes and assess economic viability under real-world conditions. This study emphasizes the need for integrated approaches combining water treatment, renewable energy, and policy incentives to advance a circular economy model for hydrogen production. Full article

Jordan is a relatively small country with limited natural resources, but it faces a burgeoning demand for water, energy, and food to accommodate a growing population, refugee migration, and the challenges of climate change that will persist through the rest of this century. Jordan’s Main Water Conveyance System is the backbone of distributing scarce water resources to meet domestic and agricultural demands. Therefore, understanding how the future energy requirements of this system may change is critical for managing the country’s water, energy, and food resources. This paper applied a water balance model to calculate the energy consumption of Jordan’s Main Water Conveyance System between 2015 and 2050, and the results point to high energy requirements for the future of distributing Jordan’s water. In the base year of 2015, the unmet water demand was 134.55 MCM, and the supplied water volume delivered was 438.75 MCM, while the energy consumption was 1496.7 GWh. The energy intensities for water conveyance and water treatment were 7.11 kWh/m³ and 0.5 kWh/m³, respectively. We examined five scenarios of future water and energy demand within Jordan: a reference scenario, a continuation of current behavior, two scenarios incorporating improved water management strategies, and a pessimistic scenario with no interventions. According to all scenarios, the energy consumption is expected to be doubled by the year 2050, reaching approximately 3172 GWh. It is recommended that Jordan prioritizes solar-powered conveyance and pumping to reduce the projected doubling of energy demand by 2050. Across all scenarios, the demand for nonrenewable energy associated with water conveyance is projected to rise significantly, particularly in the absence of renewable integration or efficiency interventions. Total water demand is expected to increase by up to 35% by 2050, with urban and agricultural sectors being the primary contributors. Full article

The escalating summer heat in the Middle East and Northern Africa (MENA) region, particularly in Bahrain, poses a significant threat to human health, prompting the use of water mist systems for immediate heat stress relief and heat stroke treatment. Although these systems are known for their rapid cooling effects, the impact of varying water temperatures on their efficiency is not well understood. This research addressed this gap by investigating the effects of different water temperatures on cooling performance and user comfort in a semi-outdoor environment in Bahrain. Field experiments, comparing mist fan system (MFS) zones with non-misted areas, were conducted alongside user surveys to assess perceived thermal comfort. The findings revealed that lower water temperatures significantly enhanced cooling, with a 7.7 °C water temperature achieving a 4 °C temperature reduction and improving perceived comfort. The MFS effectively shifted participant perceptions from “Hot” or “Slightly Warm” to “Natural” or “Slightly Cool”, confirming its rapid heat mitigation capabilities. Notably, 54.5% of participants preferred the system using the coldest water, citing immediate relief. Despite the substantial cooling benefits, achieving standard thermal comfort during peak heat remained challenging. Future research should explore nozzle optimization, wind effects, water usage, solar-powered system efficiency, and the impact of clothing on thermal comfort. Full article

This paper examines the application of artificial intelligence (AI) in desalination. The study explored AI techniques, including machine learning, neural networks, and genetic algorithms, to enhance system efficiency and reduce energy costs. Case studies assessed the impact of AI on desalination systems, including those powered by renewable energy sources. Key findings revealed that AI-driven systems improved water quality, reduced energy consumption by up to 50%, and enabled predictive maintenance, minimizing downtime. Challenges in integrating AI with renewable energy-powered water treatment and desalination systems were addressed by analyzing hybrid setups combining solar, wind, and battery storage with reverse osmosis (RO) and multi-stage flash (MSF) technologies. These systems demonstrated critical improvements in energy efficiency, making desalination more viable for arid and remote areas. Fault detection algorithms and predictive maintenance emerged as pivotal AI applications, significantly reducing maintenance costs and enhancing reliability. This study was concluded by identifying challenges such as the intermittent nature of renewable energy and the complexities of designing scalable hybrid AI systems. Future research should further refine AI techniques, advancing sustainable and energy-efficient water treatment solutions. Full article

Arsenic contamination poses a severe health risk in regions with high water vulnerability and limited treatment infrastructure. This study evaluates a photovoltaic-powered water treatment system for arsenic removal in La Yarada Los Palos District, Tacna, Peru, where arsenic concentrations reached up to 0.0417 mg/L, significantly surpassing the World Health Organization (WHO) limit of 10 µg/L (0.01 mg/L) for drinking water. The system integrates a natural sedimentation pretreatment stage in a geomembrane-lined reservoir, followed by oxidation with sodium hypochlorite, coagulation, and adsorption. Arsenic removal efficiencies ranged from 99.72% to 99.85%, reducing residual concentrations below WHO guidelines. Pretreatment significantly improved performance, reducing turbidity by up to 66.67% and TSS by up to 70.37%, optimizing subsequent treatment stages. Operationally, pretreatment decreased cleaning frequency from six to four cleanings per month, while backwashing energy consumption dropped by 33% (from 45.72 kWh to 30.48 kWh). The photovoltaic system leveraged the region’s high solar radiation, achieving an average daily generation of 20.31 kWh and an energy surplus of 33.08%. The system’s performance was evaluated within the context of existing arsenic removal technologies, demonstrating that the integration of natural sedimentation and renewable energy constitutes a viable operational alternative. Given the regulatory framework in Peru, where arsenic limits align with WHO standards, conventional water treatment systems are normatively and technically unfeasible under national legislation. Furthermore, La Yarada Los Palos District faces challenges due to its limited infrastructure for conventional electrification via power grid, as identified in national reports on rural electrification and gaps in access to basic services. Beyond its performance in the study area, the system’s modular design allows adaptation to diverse water sources with varying arsenic concentrations, turbidity levels, and other physicochemical characteristics. In remote regions with limited access to the power grid, such as the study site, photovoltaic energy provides a self-sustaining and replicable alternative, particularly in arid and semi-arid areas with high solar radiation. These conditions are not exclusive to Latin America but are also prevalent in remote regions of Africa, the Middle East, Asia, and Oceania, where groundwater arsenic contamination is a significant issue and renewable energy availability can enhance water treatment sustainability. These findings underscore the potential of using sustainable energy solutions to address water contamination challenges in remote areas. The modular and scalable design of this system enables its replication in regions with adverse hydrogeological conditions, integrating renewable energy and pretreatment strategies to enhance water treatment performance. The framework presented in this study offers a replicable and efficient approach for implementing eco-friendly water treatment systems in regions with similar environmental and resource constraints. Full article

Chlorine plays an essential role in various industries, such as wastewater treatment, disinfection, plastics, and pharmaceuticals, contributing to a significant global demand. Traditional methods of chlorine production, including chemical reactions involving manganese dioxide, potassium chlorate, and potassium permanganate, as well as the electrolysis of saturated salt solutions, are associated with safety and efficiency concerns. This study introduces a novel approach for the photoelectrocatalytic production of chlorine gas through the oxidation of chloride ions in potassium chloride solutions using a dual semiconductor photoelectrode system composed of TiO₂ and Cu₂O. By harnessing solar energy, this system enables the concurrent, safe, and efficient production of both chlorine and hydrogen gases. The TiO₂ photoelectrode is employed for chlorine production, while Cu₂O is used for hydrogen generation. The dual photoelectrode system mimics the process of electrolytic seawater electrolysis, offering a promising alternative to conventional methods. Through linear sweep voltammetry, current–time tests, and electrochemical impedance spectroscopy, we demonstrate the effectiveness of this approach, supported by a detailed analysis of the energy band structure. Additionally, the material’s characteristics were verified using X-ray diffraction (XRD) and scanning electron microscopy (SEM). This work not only provides a safer and more efficient method for chlorine production but also highlights the potential of solar-powered photoelectrocatalysis in large-scale applications. These findings point toward a sustainable and environmentally friendly direction for chlorine production under simulated seawater conditions, with significant implications for renewable energy-driven industrial processes. Full article

Despite the huge progress achieved in the optimization of perovskite solar cell (PSC) performance, stability remains a limiting factor for technological commercialization. Here, a study on the photovoltaic, structural and morphological stability of semi-transparent formamidinium lead bromide-based PSCs is presented. This work focuses on the positive role of 2D nanoscale layer passivation, induced by perovskite surface treatment with a mixture of iso-Pentylammonium chloride (ISO) and neo-Pentylammonium chloride (NEO). In situ X-ray diffraction (XRD) is applied in combination with atomic force microscopy (AFM), and the results are correlated to the devices’ photovoltaic performances. The superior power conversion efficiency and overall stability of the ISO-NEO system is evidenced, as compared to the un-passivated device, under illumination in air. Furthermore, the role of the ISO-NEO treatments in increasing the morpho-structural stability is clarified as follows: a bulk effect resulting in a protective role against the loss in crystallinity of the perovskite 3D phase (observed only for the un-passivated device) and an interface effect, being the observed 2D phase crystallinity loss spatially localized at the interface with the 3D phase where a higher concentration of defects is expected. Importantly, the complete stability of the device is achieved with the passivated ISO-NEO-encapsulated device, allowing us to exclude the intrinsic degradation effects. Full article

Irrigation plays a crucial role in enhancing food production, increasing land productivity, and improving the livelihoods of smallholder farmers in Sub-Saharan Africa (SSA). Solar pumps and water harvesting ponds have emerged as promising technologies for sustainable agriculture for smallholders in SSA and beyond. The socio-economic impacts of these systems are less studied in the existing literature. This study examined the agricultural productivity of solar pump and water harvesting irrigation technologies and their impacts on income and food security among smallholder farmers in the Central Rift Valley, Lake Hawassa, and Upper Awash sub-basin areas in Ethiopia. Data were collected from 161 farming households that were selected randomly from woredas where solar pump and water harvesting pond irrigation systems had been implemented. The sample size was determined using the power calculation method. Bio-physical observation and measurements were also conducted at field levels. The benefit–cost ratio (BCR) and net water value (NWV) from the use of solar pump and water harvesting pond irrigations were analyzed to assess the viability of these systems. The household food consumption score (HFCS) and household dietary diversity score (HDDS) were calculated to measure food security, while the revenue from crop production was used to measure crop income. An endogenous switching regression model was applied to address the endogeneity nature of the adoption of the irrigation technologies. The counterfactual analysis, specifically the Average Treatment Effect on the Treated (ATT), was used to evaluate the impacts of the irrigation technologies on income and food security. Results indicate that the ATT of crop income, HFCS, and HDDS are positive and statistically significant, illustrating the role of these irrigation systems in enhancing smallholder farmers’ welfare. Moreover, smallholder farmers’ solar pump irrigation systems were found to be economically viable for few crops, with a BCR greater than 1.0 and an NWV ranging from 0.21 to 1.53 USD/m³. It was also found that bundling agricultural technologies with solar pump irrigation systems leads to enhanced agricultural outputs and welfare. The sustainable adoption and scale-up of these irrigation systems demand addressing technical and financial constraints, as well as input and output market challenges. Full article

Harnessing solar energy offers a sustainable alternative for powering electrolysis for green hydrogen production as well as wastewater treatment. The high costs and logistical challenges of electrolysis have resulted in limited widespread investigation and implementation of electrochemical technologies on an industrial scale. To overcome these challenges, this study designs and tests a new approach to chemical experiments and wastewater treatment research using a portable standalone open-source solar photovoltaic (PV)-powered station that can be located onsite at a wastewater treatment plant with unreliable electrical power. The experimental system is equipped with an energy monitoring data acquisition system. In addition, sensors enable real-time monitoring of gases—CO, CO₂, CH₄, H₂, H₂S, and NH₃—along with temperature, humidity, and volatile organic compounds, enhancing safety during electrochemical experiments on wastewater, which may release hazardous gases. SAMA software was used to evaluate energy-sharing scenarios under different grid-connected conditions, and the system can operate off the power grid for 98% of the year in Ontario, Canada. The complete system was tested utilizing a laboratory-scale electrolyzer (electrodes of SS316L, Duplex 2205, titanium grade II and graphite) with electrolyte solutions of potassium hydroxide, sulfuric acid, and secondary wastewater effluent. The electrolytic cell specifically developed for testing electrode materials and wastewater showed a Faraday efficiency up to 95% and an energy efficiency of 55% at STP, demonstrating the potential for use of this technology in future work. Full article

More distributed energy resources are being integrated into microgrid systems, making scheduling more complex and challenging. In order to achieve the utilization of renewable energy and peak load shifting on a microgrid system, an optimal scheduling model is established. Firstly, a microgrid operation model including a photovoltaic array, wind turbine, micro gas turbine, diesel generator, energy storage, and grid connection is constructed, considering the demand response and the uncertainty of wind and solar power. The modeling demand response is determined via a price–demand elasticity matrix, whereas the uncertainty of wind and solar power is established using Monte Carlo sampling and a K-means clustering algorithm. Secondly, a multi-objective function that includes operational and environmental treatment costs is constructed. To optimize the objective function, an Improved Dung Beetle Optimization algorithm (IDBO) is proposed. A tent mapping, non-dominated sorting, and reverse elite learning strategy is proposed to improve the Dung Beetle Optimization algorithm (DBO); therefore, the IDBO is developed. Finally, the proposed model and algorithm are validated through some simulation experiments. A benchmark function test proves that IDBO has a fast convergence speed and high accuracy. The microgrid system scheduled by IDBO has the lowest total cost, and its ability to achieve peak load shifting and improve the utilization of renewable energy is proved through tests involving different scenarios. The results show that compared with traditional optimal scheduling models and algorithms, this approach is more reliable and cost-effective. Full article

Treatment of extremely saline water such as the brine rejected from reverse osmosis water desalination plants, and produced water from shale oil and non-conventional gas extraction, is considered a global problem. Consequently, in this work, hollow fiber membrane distillation (HFMD) is experimentally evaluated for desalinating extremely saline water of a salinity ranging from 40,000 to 130,000 ppm. For the purpose of comparison, the HFMD is also tested for desalinating brackish (3000–12,000 ppm) and sea (25,000–40,000 ppm) water. Firstly, the HFMD is tested at two values of feed water temperature (65 and 76 °C) and flow rate (600 and 850 L/h). The experimental results showed that the HFMD productivity significantly increases when the temperature of feed water increases. Increasing the feed water flow rate also has a positive effect on the productivity of HFMD. It is also concluded that the productivity of the HFMD is not significantly affected by increasing the salt concentration when brackish and sea water are used. The productivity also slightly decreases with increasing the salt concentration when extremely saline water is used. The decrement in the productivity reaches 27%, when the salt concentration increases from 40,000 to 130,000 ppm. Based on the conducted economic analysis, the HFMD shows a good potential for desalinating extremely saline water especially when the solar collector is used as a heat source. In this case, the cost per liter of freshwater is reduced by 21.7–23.1% when the evacuated tube solar collectors are used compared to the system using electrical heaters. More reduction in the cost per liter of freshwater is expected when a high capacity solar-powered HFMD plant is installed. Full article

The central inverter topology presents some advantages such as simplicity, low cost and high conversion efficiency, being the first option for interfacing photovoltaic mini-generation, whose shading and panel orientation studies are evaluated in the project planning phase. When it uses only one power converter, its control structures must ensure synchronization with the grid, tracking the maximum power generation point, appropriate power quality indices, and control of the active and reactive power injected into the grid. This work develops and contributes to mathematical models, the principles of formation of control structures, the decoupling process of the control loops, the treatment of nonlinearities, and the tuning of the controllers of a single-stage photovoltaic system that is integrated into the electrical grid through a three-phase voltage source inverter. Using the parameters and configurations of an actual inverter installed at the power plant CRESP (Reference Center for Solar Energy of Petrolina), mathematical modeling, implementation, and computational simulations were conducted in the time domain using MatLab^® software (R2021b). The results of the currents injected into the grid, voltages, active powers, and power factor at the connection point with the grid are presented, analyzed, and compared with real measurement data during one day of operation. Full article