Search Results (221)

In this study, a facile and mask-free femtosecond laser direct writing (FLDW) approach is proposed to fabricate porous graphene (FLIG) patterns directly on polyimide (PI) substrates. By systematically adjusting the laser scanning spacing (10–25 μm), denser and more continuous microstructures are obtained, resulting in significantly enhanced thermal sensitivity. The optimized sensor demonstrated a temperature coefficient of 0.698% °C⁻¹ within the range of 40–120 °C, with response and recovery times of 10.3 s and 20.9 s, respectively. Furthermore, it exhibits remarkable signal stability across multiple thermal cycles, a testament to its reliability in extreme conditions. Moreover, the sensor was successfully integrated into a 3D-printed robotic platform, achieving both contact and non-contact temperature detection. These results underscore the sensor’s practical adaptability for real-time thermal sensing. This work presents a viable and scalable methodology for fabricating high-performance FLIG-based flexible temperature sensors, with extensive application prospects in wearable electronics, electronic skin, and intelligent human–machine interfaces. Full article

In recent decades, flexible electronics have witnessed remarkable advancements in multiple fields, encompassing wearable electronics, human–machine interfaces (HMI), clinical diagnosis, and treatment, etc. Nevertheless, conventional rigid electronic devices are fundamentally constrained by their inherent non-stretchability and poor conformability, limitations that substantially impede their practical applications. In contrast, conductive hydrogels (CHs) for electronic skin (E-skin) and healthcare monitoring have attracted substantial interest owing to outstanding features, including adjustable mechanical properties, intrinsic flexibility, stretchability, transparency, and diverse functional and structural designs. Considerable efforts focus on developing CHs incorporating various conductive materials to enable multifunctional wearable sensors and flexible electrodes, such as metals, carbon, ionic liquids (ILs), MXene, etc. This review presents a comprehensive summary of the recent advancements in CHs, focusing on their classifications and practical applications. Firstly, CHs are categorized into five groups based on the nature of the conductive materials employed. These categories include polymer-based, carbon-based, metal-based, MXene-based, and ionic CHs. Secondly, the promising applications of CHs for electrophysiological signals and healthcare monitoring are discussed in detail, including electroencephalogram (EEG), electrocardiogram (ECG), electromyogram (EMG), respiratory monitoring, and motion monitoring. Finally, this review concludes with a comprehensive summary of current research progress and prospects regarding CHs in the fields of electronic skin and health monitoring applications. Full article

The increasing prevalence of diabetes mellitus necessitates the development of advanced glucose-monitoring systems that are non-invasive, reliable, and capable of real-time analysis. Wearable electrochemical biosensors have emerged as promising tools for continuous glucose monitoring (CGM), particularly through sweat-based platforms. This review highlights recent advancements in enzymatic and non-enzymatic wearable biosensors, with a specific focus on the pivotal role of nanomaterials in enhancing sensor performance. In enzymatic sensors, nanomaterials serve as high-surface-area supports for glucose oxidase (GOx) immobilization and facilitate direct electron transfer (DET), thereby improving sensitivity, selectivity, and miniaturization. Meanwhile, non-enzymatic sensors leverage metal and metal oxide nanostructures as catalytic sites to mimic enzymatic activity, offering improved stability and durability. Both categories benefit from the integration of carbon-based materials, metal nanoparticles, conductive polymers, and hybrid composites, enabling the development of flexible, skin-compatible biosensing systems with wireless communication capabilities. The review critically evaluates sensor performance parameters, including sensitivity, limit of detection, and linear range. Finally, current limitations and future perspectives are discussed. These include the development of multifunctional sensors, closed-loop therapeutic systems, and strategies for enhancing the stability and cost-efficiency of biosensors for broader clinical adoption. Full article

Wearable sensors have rapidly advanced, enabling applications such as human activity monitoring, electronic skin, and biomimetic robotics. To meet the growing demands of these applications, multifunctional sensing has become essential for wearable devices. However, most existing studies predominantly focus on enhancing single-function sensing capabilities. This study introduces a multifunctional sensor that combines high stretchability for strain and pressure detection with ultraviolet (UV) sensing capability. To achieve simultaneous detection of strain, pressure, and UV light, a multi-sensing approach was employed: a capacitive method for strain and pressure detections and a resistive method utilizing a pn-heterojunction diode for UV detection. In the capacitive method, polyaniline (PANI) served as parallel-plate electrodes, while silicon-based elastomer acted as the dielectric layer. This configuration enabled up to 100% elongation and enhanced operational stability through encapsulation. The sensor demonstrated a strong linear relationship between capacitance value changes reasonably based on the area of PANI, and showed a good linearity with an R-squared value of 0.9918. It also detected pressure across a wide range, from low (0.4 kPa) to high (9.4 kPa). Furthermore, for wearable applications, the sensor reliably captured capacitance variations during finger bending at different angles. For UV detection, a pn-heterojunction diode composed of p-type silicon and n-type zinc oxide nanorods exhibited a rapid response time of 6.1 s and an on/off ratio of 13.8 at −10 V. Durability under 100% tensile strain was confirmed through Von Mises stress calculations using finite element modeling. Overall, this multifunctional sensor offers significant potential for a variety of applications, including human motion detection, wearable technology, and robotics. Full article

The current study focuses on the manufacturing and characterization of various forms of Ecoflex and their composites to improve the mechanical properties and surface texture, specifically for use in wearable sensors and electronic skin applications. Various types of Ecoflex elastomers were mixed to form blended composite materials, which could be used to tune the mechanical properties. Experimental and simulation methods were conducted to understand the mechanical behavior and material properties of the manufactured samples under large deformation (1200% strain) by various dynamic loading conditions. Further, the surface conditions of specimens were analyzed and evaluated using scanning electron microscopy and contact angle goniometer. The Yeoh model reasonably predicts the viscoelastic and hysteresis behavior of Ecoflex and its composites in accordance with the experimental data for small and large strain. The surface smoothness and moisture-resistant properties of the material surface were enhanced up to a contact angle of 127° (maximum) by adding x = 15 wt% of surface tension diffusers, with a slight compromise in stretchability. This comprehensive investigation and database of Ecoflex–Ecoflex composite can guide and help researchers in selecting and applying the most appropriate Ecoflex/blended solutions for a specific application, while providing insight into the mechanics of materials of blended materials. Full article

Wearable tactile sensors with high sensitivity can be potentially used to continuously monitoring physiological signals that are closely related to disease diagnosis and health condition tracking. However, the development of such tactile sensors involves a number of challenges, including a series of expensive patterning processes for microstructure manufacturing and addressing the large thickness of the microstructured composite film. Herein, a mold-free approach is presented to develop an ultra-thin ZnO/PEDOT:PSS composite film with flower-like microstructures via a feasible solution process for highly sensitive tactile sensors. The fabricated tactile sensors exhibit a high sensitivity of 4 × 10³ kPa⁻¹ in the pressure range 0–10 kPa, a fast response to various pressures in merits of the hierarchical microstructures on top of the ultra-thin composite films. Thanks to the fascinating performance of the devices, the tactile sensors are demonstrated with the ability to monitor physiological signals, subtle human body motions, and spatial pressure distribution. Full article

Quantifying inflammation plays a critical role in understanding the progression and development of various diseases. Non-invasive or minimally invasive wearable biosensors have garnered significant attention in recent years due to their convenience, comfort, and ability to provide continuous monitoring of biomarkers, particularly in infectious diseases and chronic diseases. However, there are still areas for improvement in developing reliable biosensing devices to detect key inflammatory biomarkers in clinically relevant biofluids. This review first introduces common biofluids with a focus on the most clinically significant inflammatory biomarkers. Specifically, it discusses the challenges encountered in extracting and detecting analytes in these biofluids. Subsequently, we review three popular types of non-invasive wearable biosensors for inflammation monitoring (microneedle patches, flexible electronic skins, and textile-based sensors). The design and operational considerations of these devices are analyzed, followed by an exploration of the information processing approaches employed during data processing. Finally, we envision future opportunities by guiding the development and refinement of non-invasive or minimally invasive wearable biosensors for continuous inflammation monitoring in chronic diseases. Full article

Developing flexible sensors that combine high sensitivity, a wide detection range, and comfortable wearability remains a key challenge in the development of electronic skin. This study presents a breathable, highly sensitive, and wearable piezoresistive sensor based on the preparation of hierarchical microporous PU@MXene + CNT films and single-sided electrodes using a simple and effective method. Distilled water was used as a non-solvent to induce the separation of polyurethane films (PU) with different mass fractions, forming a gradient porous structure with inconsistent pore morphologies in the upper and lower layers. Three-dimensional structure analysis of the hierarchical porous films with varying gradients, conducted using computed tomography, revealed that the porous structures formed after phase separation of PU solutions with different mass fractions exhibited different morphologies. As the mass fraction increased, the pore size, pore volume, and porosity gradually decreased while the surface area gradually increased. The greater the gradient of the constructed porous film, the more significant the difference between the upper- and lower-layer structures. A flexible sensor prepared using the PU@MXene + CNT porous film with the largest gradient exhibited excellent sensitivity in a wide detection range from 0.7 to 20 kPa, which was higher than that of porous films with other gradients, demonstrating high stability (>8000 cycles). The air permeability and moisture permeability of PU@MXene + CNT with the largest gradient were 0.9922 L/m²/s and 1123.6 g/m²/day, respectively, and these values were 1.35 and 4.40 times those of the non-porous film. Therefore, the constructed flexible piezoresistive sensor with a gradient porous structure had both high sensitivity and wide detection range, as well as good air and moisture permeability. Finally, the sensor successfully monitored human movements, including throat activity, finger motions, and arm bending, demonstrating its potential for wearable electronic applications. Full article

Recent advancements in wearable electronics have significantly enhanced human–device interaction, enabling applications such as continuous health monitoring, advanced diagnostics, and augmented reality. While progress in material science has improved the flexibility, softness, and elasticity of these devices for better skin conformity, their optical properties, particularly transparency, remain relatively unexplored. Transparent wearable electronics offer distinct advantages: they allow for non-invasive health monitoring by enabling a clear view of biological systems and improve aesthetics by minimizing the visual presence of electronics on the skin, thereby increasing user acceptance. Hydrogels have emerged as a key material for transparent wearable electronics due to their high water content, excellent biocompatibility, and tunable mechanical and optical properties. Their inherent softness and stretchability allow intimate, stable contact with dynamic biological surfaces. Furthermore, their ability to support ion-based conductivity is advantageous for bioelectronic interfaces and physiological sensors. Current research is focused on advancing hydrogel design to improve transparency, mechanical resilience, conductivity, and adhesion. The core components of transparent wearable systems include physiological sensors, energy storage devices, actuators, and real-time displays. These must collectively balance efficiency, functionality, and long-term durability. Practical applications span continuous health tracking and medical imaging to next-generation interactive displays. Despite progress, challenges such as material durability, scalable manufacturing, and prolonged usability remain. Addressing these limitations will be crucial for the future development of transparent, functional, and user-friendly wearable electronics. Full article

As conductive materials, ionogels have attracted significant attention for their potential applications in flexible wearable electronics. However, preparing an ionogel with mechanical properties akin to human skin while also achieving transparency, adhesion, and low hysteresis through simple processes remains challenging. Here, we introduce a multifunctional ionogel synthesized via a one-step photopolymerization method. By leveraging the good compatibility between the ionic liquid and the polymer network, as well as the hydrogen bonding and chemical crosslinking within the gel network, we achieved an ionogel with high transparency (>98%), stretchability (fracture strain of 19), low hysteresis (<5.83%), strong adhesion, robust mechanical stability, excellent electrical properties, a wide operating temperature range, and a tunable modulus (1–103 kPa) that matches human skin. When used as a conductor in soft actuators, the ionogel enabled a large area strain of 36% and a fast electromechanical conversion time of less than 1 s. The actuator demonstrated good actuation performance with voltage and frequency dependence, electrochemical stability, and outstanding durability over millions of cycles. This study provides a simple and effective method to produce multifunctional ionogels with tailored mechanical properties that match those of human skin, paving the way for their application in flexible wearable electronics. Full article

The rapid development of smart electronic skin has led researchers to design a variety of flexible and stretchable devices that can be used to monitor physiological and environmental signals. In this work, we successfully demonstrate a color-adjustable and conductive wearable optical–electronic skin (OE-skin) based on photonic crystal hydrogel that is capable of delivering both optical and electrical signal responses synchronously. The OE-skin is fabricated by incorporating a structural colored layer, composed of periodically aligned magnetic nanoparticles, into a polyacrylamide hydrogel matrix that contains tea polyphenols and borax. The dynamic boronate ester bonds formed between borax and the catechol groups of tea polyphenols are able to enhance the mechanical properties of the OE-skin, while also conferring excellent electrical conductivity, high sensitivity, and a rapid electrical response. Additionally, the tea polyphenols, which are natural active compounds derived from tea, possess diverse bioactive properties, thereby endowing the OE-skin with excellent antibacterial and biocompatibility characteristics. In addition, the developed electronic skin successfully demonstrates its capability in synergistic electronic and optical sensing during human motion monitoring, indicating broad application prospects in the field of smart wearable sensors. Full article

Flexible pressure sensors play a significant role in wearable electronics, human–machine interfaces, and health monitoring, and improving their performance has always been a major focus of research. Various microstructures have been proposed to enhance sensitivity, particularly when tilted. However, unidirectional tilting may create a shift in contact surfaces, reducing accuracy in pressure detection. To address these limitations, this study introduces a capacitive pressure sensor with a staggered tilted column microstructure, inspired by the elaborate network of epidermis and dermis layers within human skin. The simulation and experiment results reveal that the developed sensor has high sensitivity and responds rapidly to applied forces, making it suitable for real-time applications. Demonstrations of gesture recognition and physiological monitoring highlight its practical potential. These findings underscore the effectiveness of the staggered microstructure in improving sensor performance and its applicability in next-generation flexible sensors. Full article

The continuous growth of energy-efficient electronic devices and compact systems has motivated researchers to develop TFTs based on p-type semiconductors. This review examines the developments in p-type thin-film transistors (TFTs) processed using solution methods to achieve integration with complementary metal–oxide–semiconductor technology. Improving organic p-type materials is critical for achieving advanced mobility and stability characteristics with suitable process integration. Scientists study these materials for use in wearable devices which display mechanical strength when fitted onto a curve. This review presents an exclusive discussion about the wide spectrum of applications which involve flexible displays and sensors, together with upcoming technologies such as artificial skin and flexible integrated circuits. The article examines present material challenges, along with device reliability and large-scale production methods, to give a thorough analysis of solution-processed p-type TFTs toward their broad implementation in upcoming electronic devices. By summarizing the developments and most recent studies in the field, this review aims to provide useful information regarding current research into and future trends of p-type TFTs. Full article

Electronic skin (E-skin) refers to a portable medical or health electronic device that can be worn directly on the human body and can carry out perception, recording, analysis, regulation, intervention and even treatment of diseases or maintenance of health status through software support. Its main features include wearability, real-time monitoring, convenience, etc. E-skin is convenient for users to wear for a long time and continuously monitors the user’s physiological health data (such as heart rate, blood pressure, blood glucose, etc.) in real time. Health monitoring can be performed anytime and anywhere without frequent visits to hospitals or clinics. E-skin integrates multiple sensors and intelligent algorithms to automatically analyze data and provide health advice and early warning. It has broad application prospects in the medical field. With the increasing demand for E-skin, the development of multifunctional integrated E-skin with low power consumption and even autonomous energy has become a common goal of many researchers. This paper outlines the latest progress in the application of E-skin in physiological monitoring, disease treatment, human–computer interaction and other fields. The existing problems and development prospects in this field are presented. Full article

Skin is the largest organ of the human body and holds the functions of sensing, protecting, and regulating. Since ancient times, people have decorated their skin by painting themselves, cutting, and using accessories to express their personality and aesthetic consciousness as a kind of artistic expression, one that shows the development and change of aesthetic consciousness. However, there are concerns regarding the inconvenience, high time cost, and negative body perception with traditional tattoos. In addition, the trend of skin decoration has gradually withdrawn due to a lack of intelligent interaction. In response to these problems, we proposed a wearable electronic skin tattoo that offers a novel means of communication and emotional expression for individuals with communication impairments, WABEIT. The tattoo uses skin-friendly PDMS as the base material, combines multi-mode sensing components such as silver wire circuit, a programmable Surface-Mounted Device (SMD), a thin-film-pressure sensor, and a heart rate sensor, and combines the embedded development board Arduino Nano for intelligent interaction, forming a wearable electronic interactive tattoo capable of sensing the environment, human–computer interaction, and the changeable performance of intelligent perception. The sensor is also equipped with a mobile power supply to support portability. The advantages of WABEIT are as follows: first, it avoids the pain, allergy, and long production process of traditional tattoos. Second, the patterns can adapt to different needs and generate feedback for users, which can effectively express personal emotions. Thirdly, the facility of removal reduces social discrimination and occupational constraints, which is especially suitable for East Asia. Experimental results indicate that the device exhibits a high sensitivity in signal response, a wide variety of pattern changes, and reliable interactive capabilities. The study demonstrates that the proposed design philosophy and implementation strategy can be generalized to the interactive design of other wearable devices, thereby providing novel insights and methodologies for human–computer interaction, electronic devices, and sensor applications. Full article