Search Results (114)

Traditional surgical techniques are based on the manual application of force using mallets and osteotomes, which often result in uncontrolled impact forces, procedural inconsistencies, and patient discomfort. Magnetic mallets (MMs), magnetodynamic devices, provide a controlled application of force using electromagnetism, aiming to achieve greater precision, reduced operating time, and improved surgical outcomes. The aim of the present systematic review was to evaluate the effectiveness of MMs compared to conventional surgical techniques in oral and implant surgery. The focused question was as follows: “Do magnetic mallets improve clinical outcomes in oral and implant surgery compared to traditional instruments?” Only clinical studies comparing the use of MMs with traditional techniques in oral surgery were included. The following databases were searched up to 27 November 2025: Pubmed, Scopus, Web of Science. For quality assessment, the Cochrane Risk of Bias 2 (RoB 2) tool was applied for randomized controlled trials (RCTs), while the Newcastle–Ottawa Scale (NOS) was used for non-randomized studies. Data were screened and synthesized by two reviewers. The systematic review was conducted based on Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) Statement. In total, 347 studies were initially found and 6 matched the inclusion criteria and were included in the review, for a total of 282 patients. Five RCTs were included, as well as one retrospective study. The studies investigated were as follows: implant site preparation (two studies with a total of 86 patients), sinus lift and contextual implant insertion (three studies, total: 102 patients), dental extraction (two studies, total: 70 patients), and split-crest (one study with 46 patients). The outcomes suggest that MMs may serve as a potential alternative to traditional techniques, exhibiting promising although preliminary outcomes. The studies included reported a lower incidence of benign paroxysmal positional vertigo with the use of MMs compared to hand osteotomes. Regarding quality assessment, RCTs raised some concerns, while the retrospective study had a moderate risk of bias. Despite the promising results, the paucity of high-quality controlled trials limits definitive conclusions on the superiority of MM over conventional techniques. Further well-designed comparative trials are needed to confirm the clinical benefits, optimize protocols across different indications, and evaluate MMs’ potential role in the management of critical bone conditions and complex surgery. Full article

Background: Platelet-rich fibrin (PRF) is an autologous biomaterial utilized as an adjunct in dental implant surgeries owing to its significant biocompatibility, supra-physiological concentration of growth factors, and ability to speed either soft or hard tissue regeneration. Methods: Today, PRF is available in both solid and liquid forms with an average resorption period of roughly 2 weeks. While various research endeavors have attempted to utilize Solid-PRF as a barrier membrane in guided bone regeneration (GBR) and various other applications, its two-week resorption period has limited its use as a solo “barrier” membrane owing to its faster-than-ideal resorption properties. Results: Recent studies have demonstrated that by heating and denaturing Liquid-PRF/albumin, the resorption properties of the heated albumin gel could be extended from 2 weeks to 4–6 months by utilizing the Bio-Heat technology. This emerging technology was given the working name ‘extended-PRF’ or e-PRF, with many clinical indications being proposed for further study. Numerous clinicians have now utilized extended-PRF (e-PRF) membranes as a substitute for collagen barrier membranes in various clinical applications, such as guided tissue/bone regeneration, recession coverage, and lateral window sinus lifts. Conclusions: This two-part case series paper aims to first illustrate the evolution of techniques developed taking advantage of this new technology in clinical practice for alveolar ridge preservation. This includes four different methods of fabrication of e-PRF along with its application in clinical practice. This article discusses the clinical outcomes, including the advantages/disadvantages of utilizing each of the four separate techniques to prepare and utilize e-PRF membranes for ridge preservation. Full article

Background: Maxillary sinus floor augmentation is widely used to enable implant placement in the atrophic posterior maxilla, yet comparative data for porcine-derived xenografts remain limited. Objective: To evaluate long-term bone regeneration and implant outcomes following sinus augmentation using a collagenated porcine xenograft. Methods: This paper reports a retrospective case series of three partially edentulous patients (aged 46–56 years) who underwent lateral sinus augmentation with a small-particle collagenated porcine xenograft (THE Graft™, Purgo Biologics, Gyeonggi-do, Republic of Korea) and staged implant placement. In one case, a controlled perforation of the Schneiderian membrane was performed to access and remove a sinus mucocele, followed by repair using a resorbable collagen membrane. Core biopsies were harvested at implant placement for histology (hematoxylin-eosin, Masson–Goldner) and tartrate-resistant acid phosphatase (TRAP) staining. Clinical outcomes included surgical events, vertical bone gain, marginal bone levels, and implant survival at long-term follow-up. Results: Healing was uneventful in all cases. Mean vertical bone gain was 12.0 mm (baseline 1.33 mm to 13.33 mm final). At a mean 46.8-month follow-up (range 38.3–52.2 months), 100% of implants were functional without failure; marginal bone loss remained < 1 mm during the first year and was stable thereafter. Histology at 3.7, 4.7, and 7.5 months showed vascularized new trabecular bone intimately contacting residual xenograft particles (new bone 20–30%, residual biomaterial 30–40%, connective tissue 30–50%). TRAP-positive multinucleated giant cells at 7.5 months indicated ongoing biomaterial degradation without severe inflammatory reactions. Conclusions: Within the limits of a small case series, collagenated porcine xenograft supported predictable bone regeneration and stable long-term implant function after sinus floor elevation, with favorable histologic integration and gradual resorption. Full article

Background and Clinical Significance: Maxillary sinus augmentation is a well-established surgical procedure for dental implant placement in the posterior maxilla when the residual alveolar bone height is insufficient. Traditionally, the lateral approach has been preferred in cases with less than 4 mm of bone; however, the crestal approach has emerged as a less invasive alternative, particularly with the advent of advanced techniques and tools such as hydraulic pressure systems and dedicated osteotomy kits. Case Presentation: This case report presents the clinical management of a 68-year-old female patient requiring rehabilitation of the right maxillary molars, where the residual bone height measured only 3.6 mm (in position 1.6) and 2.5 mm (in position 1.7). Using the CAS kit system with rounded drills and hydraulic pressure, a controlled crestal sinus elevation was performed, followed by simultaneous implant placement. Despite the extremely limited bone height, a final insertion torque of 30 Ncm was achieved for both implants, likely due to favorable sinus floor anatomy, under-preparation of the implant sites, and the use of tapered, macro-textured implants. Postoperative follow-up over three years showed stable bone levels and successful prosthetic rehabilitation with single crowns. Conclusions: This case report highlights the potential of the crestal approach in anatomically challenging scenarios. Proper planning, technique, and implant selection are mandatory to achieve predictable and long-lasting outcomes, even in cases previously considered contraindicated for this method. Further randomized controlled trials are needed to confirm this preliminary result. Full article

Background: Traditional parameters such as bone-to-implant contact percentage (BIC%) provide only static insights into implant integration and do not reflect the temporal dynamics of bone regeneration. The concept of Dynamic Regenerative Balance (DRB) was introduced to represent the biological equilibrium between bone formation and graft resorption. The break-even point serves as a measurable approximation of this equilibrium. This study aimed to illustrate the usefulness of the break-even point in expressing the balance between graft resorption and new bone formation, rather than to define definitive values for specific biomaterials. Methods: Four preclinical studies on sinus floor elevation in rabbits were selected. Each reported histomorphometric data on new bone formation and graft resorption at two or more time points. Six biomaterials were analyzed: autogenous bone, Bio-Oss^®, Bio-Oss Collagen^®, Gen-Os^®, Maxresorb^®, and Maxresorb^® Inject. The break-even point was calculated by linear extrapolation as the time at which new bone equals residual graft percentage. Results: The break-even point varied significantly among biomaterials (expressed in days/area %): autogenous bone reached equilibrium fastest (18.4 days/13.5%), followed by Gen-Os^® (40.4 d/19.1%). Bio-Oss Collagen^® (62.3 d/28.3%), Maxresorb^® (73.9 d/36.4%), and Maxresorb^® Inject (96.1 d/34.1%). For Bio-Oss^®, it occurred at 81.8 days (33.6%) in one study, while in another, it was not reached within 6 months. These differences reflect distinct regenerative kinetics and resorption profiles among materials. Conclusions: The break-even point offers a simple and informative parameter to describe the balance between graft resorption and new bone formation, providing a useful complement to conventional histomorphometric measures and a framework for future studies. Full article

Aim: This retrospective observational clinical cohort study evaluated 84-month clinical and radiographic outcomes of a regenerative protocol combining autologous dentin grafts processed with the Tooth Transformer^® device and Concentrated Growth Factors (CGFs) in patients with severe maxillary atrophy undergoing sinus augmentation with simultaneous implant placement. Materials and Methods: Thirty-one patients (30–75 years) with residual crestal bone height ≥ 5 mm and requiring extraction of ≥2 molars were included. Extracted teeth were processed with the Tooth Transformer^® to obtain demineralized dentin granules (500–1000 µm), which were combined with CGFs prepared using the Medifuge MF200^® to form “sticky bone.” All patients underwent sinus lift via a lateral window approach (Hilt Tatum technique) with simultaneous placement of 98 implants (12–14 mm), which were loaded after six months. Results: At the 84-month follow-up, no implant failures or peri-implantitis were recorded. CBCT and clinical evaluations showed stable regenerated bone volume and absence of peri-implant bone resorption. All patients received fixed prostheses within six months without complications. Conclusions: The combined use of processed autologous dentin and CGFs proved to be a safe, predictable, and effective regenerative technique in cases of severe maxillary atrophy, with a 100% implant survival rate at five years. Full article

Background/Objectives: The aim of the study was to investigate the risk factors related to early implant failures in patients treated in a private implant clinic. Methods: The study was retrospectively conducted on 392 patients (mean age = 51.2 ± 15.4 years, 48.9% female and 51.1% male) who received 930 dental implants within the period from 2000 to 2020. Included patients had received at least one implant. Patients were excluded in case of incomplete dental records that did not contain the necessary information, including personal information (patient’s name, age, gender, history and current condition of systemic diseases) and treatment protocol record. No patients were excluded on the basis of systemic disease if it did not contraindicate dental implant surgery. Patient-related variables (age, gender, smoking, history of periodontitis, accompanying disease), surgical-related variables (surgical technique, bone augmentation, lateral sinus lift, internal sinus lift, immediate implant placement after tooth extraction, immediate mucosal grafting, insertion torque,) and implant-related variables (implant design, implant level, implant surface, site of implant placement, implants diameter, length and implants brand name) were recorded. Results: GEE analysis results showed that the implant-based failure rate before or at the abutment connection stage was 5.8%. Seven factors were identified associated with early implant failures: male gender, smoking, history of radiotherapy and chemotherapy, maxilla implant placement, non-submerged healing method, implant design and implant brand. Conclusions: In light of the results obtained, both patient-related variables (gender, smoking, history of radiotherapy and chemotherapy) and variables related to the type of implant, its position and the surgical technique used (maxilla implant placement, non-submerged healing method, implant design and implant brands) were found to be statistically correlated with early failures in this study. Full article

Sinus augmentation provides a well-established model for investigating the three-dimensional morphometry and macromolecular dynamics of bone regeneration, particularly when using biphasic calcium phosphate (BCP) graft substitutes. This case series included six biopsies from patients who underwent maxillary sinus augmentation using BCP granules composed of 30% hydroxyapatite (HA) and 70% β-tricalcium phosphate (β-TCP). Bone core biopsies were obtained at healing times of 6 months, 9 months, and 12 months. Histological evaluation yielded qualitative and quantitative insights into new bone distribution, while micro-computed tomography (micro-CT) and Raman microspectroscopy (RMS) were employed to assess the three-dimensional architecture and macromolecular composition of the regenerated bone. Micro-CT analysis revealed progressive maturation of the regenerated bone microstructure over time. At 6 months, the apical regenerated area exhibited a significantly higher mineralized volume fraction (58 ± 5%) compared to the basal native bone (44 ± 11%; p = 0.0170), as well as significantly reduced trabecular spacing (Tb.Sp: 187 ± 70 µm vs. 325 ± 96 µm; p = 0.0155) and degree of anisotropy (DA: 0.37 ± 0.05 vs. 0.73 ± 0.03; p < 0.0001). By 12 months, the mineralized volume fraction in the regenerated area (53 ± 5%) was statistically comparable to basal bone (44 ± 3%; p > 0.05), while Tb.Sp (211 ± 20 µm) and DA (0.23 ± 0.09) remained significantly lower (Tb.Sp: 395 ± 41 µm, p = 0.0041; DA: 0.46 ± 0.04, p = 0.0001), indicating continued structural remodelling and organization. Raman microspectroscopy further revealed dynamic macromolecular changes during healing. Characteristic β-TCP peaks (e.g., 1315, 1380, 1483 cm⁻¹) progressively diminished over time and were completely absent in the regenerated tissue at 12 months, contrasting with their partial presence at 6 months. Simultaneously, increased intensity of collagen-specific bands (e.g., Amide I at 1661 cm⁻¹, Amide III at 1250 cm⁻¹) and carbonate peaks (1065 cm⁻¹) reflected active matrix formation and mineralization. Overall, this case series provides qualitative and quantitative evidence that bone regeneration and integration of BCP granules in sinus augmentation continues beyond 6 months, with ongoing maturation observed up to 12 months post-grafting. Full article

Objectives: Torus mandibularis (TM) is a benign bony exostosis on the lingual surface of the mandible, typically developing from the third decade of life with slow progression; its etiology remains unclear. As TM excision causes no functional or aesthetic disadvantages, its use as autologous bone graft material (e.g., for pre-implant or sinus lift augmentation) has been suggested. In this study, we investigate the prevalence and expression of TM in a southern German population with regard to age and gender. Additionally, we examine whether TM undergoes dynamic changes over time, with the hypothesis that TM may show temporal growth. Material and Methods: A retrospective analysis of CBCT scans from 210 randomly selected patients (105 males, 105 females) was performed. Patients were divided into three age groups (≤40, 41–60, ≥61 years; 70 per group), and TM was measured using OsiriX MD. For the longitudinal study, 146 CBCTs from 73 patients were compared over intervals of 2–9 years. Surface changes were assessed via 3D overlay using GOM Inspect. Results: TM was found in 30.5% of patients, and its prevalence was significantly higher in males (38%) than females (23%), with no age-related differences identified. Most TMs measured <2 mm (n = 51); only five exceeded this size. No dynamic growth was observed over time. Conclusion and Clinical Implications: TM is a common anatomical variant, more frequently detected through 3D imaging than clinical examination. In most cases, size remains minimal (<2 mm), limiting its clinical use as augmentation material in rare individual cases. Full article

Background: The combination of polynucleotides and hyaluronic acid with bovine bone grafts in maxillary sinus lift procedures appears to be a promising strategy to enhance bone regeneration. This study aimed to analyze implant osseointegration, bone repair and sinus mucosa integrity using Bio-Oss^® and Hyaluronic Acid-Polynucleotide Gel (Regenfast^®) in maxillary sinus augmentation in rabbits. Methods: Sinus floor elevation was performed in 12 rabbits, with one implant placed per sinus simultaneously. In the control group, sinuses were grafted with deproteinized bovine bone mineral (Bio-Oss^®) alone; in the test group, Bio-Oss^® was combined with Regenfast^®. Two histological slides were obtained per sinus after 2 weeks (six animals) and 10 weeks (six animals): one from the grafted area alone (non-implant sites), and one from the implant site. Primary outcome variables included the percentage of newly formed bone, the extent of implant osseointegration, and the number of sinus mucosa perforations caused by contact with graft granules. Results: After 10 weeks of healing, the test group showed a significantly higher percentage of new bone formation (37.2 ± 6.7%) compared to the control group (26.8 ± 10.0%; p = 0.031); osseointegration extended to the implant apex in both groups; fewer sinus mucosa perforations were observed in the test group (n = 5) than in the control group (n = 14). Conclusions: The addition of Regenfast^® to Bio-Oss^® granules promoted enhanced bone regeneration within the elevated sinus area and was associated with a lower incidence of sinus membrane perforations compared to the use of Bio-Oss^® alone. Full article

Background: Wettability of dental implant surfaces is a key factor in the osteointegration process. This study aimed to evaluate the effect of a new hydrophilic surface on implant stability in posterior maxilla rehabilitations. Materials and Methods: A 6-month, single-center, parallel-group clinical trial following STROBE guidelines was reported. Implant Stability Quotient (ISQ) changes were compared between implants with a moderately rough surface (MultiNeO CS, Alpha-Bio Tec, Israel, Control Group–CG) and those with the same surface and, in addition, nano-scale roughness and hydrophilic properties (MultiNeO NH CS, Alpha-Bio Tec, Israel, Test Group–TG) placed using a crestal sinus lift technique. ISQ values at bucco-lingual (ISQBL) and mesio-distal (ISQMD) sides were measured at insertion (t0), 4 months (t4), and 6 months (t6). Repeated measures ANOVA (RMA) was performed for statistical evaluation. Results: The study included 35 participants (18 TG, 17 CG). Mean ISQBL0 was 69.45 (SD = 12.62), increasing to 71.72 (SD = 6.74) at t4 and 75.21 (SD = 4) at t6. ISQMD0 mean was 67.54 (SD = 12.54), rising to 72.32 (SD = 6.90) at t4 and 75.67 (SD = 4.60) at t6. No statistically significant differences were found between groups, though TG showed a significant increase in ISQBL at t6 vs. t4 and ISQMD at t6 vs. t0. One-way ANOVA revealed no significant variations between mean ISQ differences over time. Conclusion: Both groups exhibited an increasing ISQ trend, but no significant differences were observed between t4–t0 and t6–t4 periods. Further research is required to assess the impact of hydrophilia on early loading, osteointegration, and long-term outcomes. Full article

Implant–prosthetic rehabilitation of the posterior edentulous maxilla is challenging due to inadequate bone volume resulting from alveolar ridge resorption and maxillary sinus pneumatization. This study explores the use of hyaluronic acid (HA) as a biomaterial in maxillary sinus elevation, particularly in combination with a fluid dynamic approach, as an alternative to traditional lateral approaches and granular biomaterials. Methods: A prospective study was conducted on 58 patients with posterior maxillary edentulism. Preoperative CBCT scans assessed residual bone height and sinus width. A minimally invasive surgical protocol utilizing a device for fluid-dynamic membrane elevation and injection of 2% cross-linked hyaluronic acid was employed, followed by simultaneous implant placement. Postoperative follow-up included a CBCT scan at 12 months to evaluate new bone height, measured mesially and distally. Implant stability was assessed using resonance frequency analysis at second-stage surgery. Results: A significant increase in bone height was observed at 12 months post-surgery, with an average bone gain of 7.5 mm. All 58 implants achieved primary stability, and no implant failures or signs of peri-implantitis were noted during the follow-up period. Higher bone gain was observed in wider sinuses. Conclusions: The fluid-dynamic transcrestal sinus floor elevation technique combined with hyaluronic acid appears to be a minimally invasive and effective method for achieving significant bone regeneration in the posterior maxilla, facilitating implant–prosthetic rehabilitation with potentially low risks and morbidity. Further large-scale studies are warranted to validate these findings across diverse clinical scenarios. Full article

Objectives: This retrospective study aimed to evaluate the increase in vertical bone height following sinus lift procedures using the CAS (Crestal Approach Sinus) kit technique in combination with tissue-level implants. Additionally, the quantity of bone between the implant apex and the Schneiderian membrane was assessed to determine the effectiveness and safety of this minimally invasive approach. Methods: The study included 15 patients (20 implants) who underwent sinus lift procedures with the CAS kit technique and tissue-level implants in the posterior maxilla between September 2021 and October 2024. Inclusion criteria required a minimum residual bone height (RBH) of 2 mm. Cone-beam computed tomography (CBCT) scans were used for initial screening, and panoramic radiography evaluated outcomes at implant placement and nine months postoperatively. Primary outcomes included implant and prosthetic survival rates, as well as biological and technical complications. Secondary outcomes were vertical bone height and the amount of bone above the implant tip. Statistical analyses were conducted using the Wilcoxon signed-rank test with a significance level of 0.05. Results: All implants achieved successful osseointegration, with no implant or prosthetic failures and no biological or technical complications reported. The mean RBH at implant placement was 4.2 ± 1.4 mm, which increased to an overall membrane elevation of 13.8 ± 1.8 mm. At the 9-month follow-up, the overall membrane elevation was slightly reduced to 13.0 ± 1.6 mm (p = 0.000), with a mean bone gain of 9.6 ± 2.4 mm. The amount of bone above the implant tip was 3.4 ± 1.7 mm at placement, decreasing to 3.0 ± 1.2 mm at follow-up (p = 0.007). Conclusions: The CAS kit technique combined with tissue-level implants demonstrated significant vertical bone gain and high implant survival rates without complications. This minimally invasive approach proved effective and safe for sinus augmentation in patients with limited residual bone height. The findings support the CAS kit’s potential as a preferred technique for maxillary sinus elevation. Further research with larger cohorts and long-term follow-up is needed to validate these results. Full article

Background: Sinus-lift (SL) is a pre-prosthetic procedure with the objective of increasing bone height to achieve implant insertion primary stability in implant-supported prostheses. The biomechanical properties of SL augmentation materials are influenced by their origin, manufacture, bioactive substances addition, receiver, and surgical procedure. This systematic review provides insights into state-of-the-art SL biomaterials, focusing on autologous bone grafting as the gold standard. Methods: The study followed the PRISMA flow diagram, searching WoS (Web of Science), Embase, Cochrane, and PubMed databases using the search terms «sinus lift» OR «sinus augmentation» OR «bone graft» OR «bovine» OR «porcine» OR «autologous» OR «allogenic» OR «xenogeneic» OR «alloplastic» OR «hydroxyapatite» OR «β-tricalcium phosphate (β-TCP)» OR «equine» OR «PRF». Results: The highest bone gain was provided by Bioglass at 42%. Articles written between 2014 and 2024 in English or French, containing human studies and with full text available, were included. Participants were required to be in good general health, without acute, chronic, or congenital diseases, or substance abuse (drugs, alcohol, or nicotine). SL surgery was performed using the lateral approach, with no Schneiderian membrane perforation or postoperative complications. The network meta-analysis was conducted using the R statistical computing environment. To assess the inconsistency between direct and indirect evidence, we used a net heat plot. To evaluate heterogeneity across studies, we used the chi-squared-based Q-test and I² statistic. A significance level of 0.05 was applied throughout all analyses. Results: Allogeneic bovine bone and hydrox yapatite demonstrated the lowest resorption rates. Significant differences were found for residual graft and connective tissue between allogenous bovine bone (ABB) + AlB vs. β-TCP + PRF (p = 0.028); ABB + AlB vs. β-TCP (p = 0.034); ABB + AlB vs. BCP (p = 0.037). Meta-analysis showed that the overall heterogeneity was 51.8% (6.9–75%; p = 0.019), with significant heterogeneity within designs (p = 0.007) and no significant heterogeneity between designs (p = 0.39). AB had a better bone regeneration ratio compared to many of the other interventions, but only two passed the threshold of significance: A1B and B-TCP + AB. Conclusions: A grafting material’s superiority is determined by its new bone formation ratio, connective tissue integration, residual graft content, and bone resorptionratio. Although autologous bone grafting has exhibited superior bone regeneration compared to other biomaterials, it was not favored due to its unpredictable connective tissue concentration and bone resorption ratio. Additionally, autologous bone exhibited the fastest metabolic turnover among all grafting materials. Full article

Background/Objectives: Surgical guides have been used in a variety of dental procedures, such as implant placement to improve clinical accuracy and reduce post-operative complications. This report presents a novel and versatile workflow for the design and fabrication of a “multi-purpose” fully-guided tooth- and bone-supported one-piece surgical guide. Methods: Briefly, intraoral and perioral anatomical features were captured by an intraoral scan and a cone-beam computed tomography scan. The data were segmented and aligned with analysis software to enable the digital design of surgical guides. The versatility of this method was demonstrated through its application in the two cases presented: the first involved a lateral sinus lift with simultaneous implant placement, and the second involved the removal of a foreign object from the alveolar bone prior to implant placement. Results: Positive clinical outcomes were confirmed at follow-up visits for up to 12 months. Conclusions: This method may be applied to a range of challenging clinical scenarios, such as apicectomy, the extraction of supernumerary or unerupted teeth, corticotomy to facilitate orthodontic movement, the precise reduction of bony spurs or exostoses, and the conservative surgical removal of pathologies. Full article